diff options
Diffstat (limited to 'lib/librte_cryptodev/rte_cryptodev.h')
| -rw-r--r-- | lib/librte_cryptodev/rte_cryptodev.h | 238 |
1 files changed, 186 insertions, 52 deletions
diff --git a/lib/librte_cryptodev/rte_cryptodev.h b/lib/librte_cryptodev/rte_cryptodev.h index 8f63e8f6..88aeb873 100644 --- a/lib/librte_cryptodev/rte_cryptodev.h +++ b/lib/librte_cryptodev/rte_cryptodev.h @@ -1,6 +1,6 @@ /*- * - * Copyright(c) 2015-2016 Intel Corporation. All rights reserved. + * Copyright(c) 2015-2017 Intel Corporation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -66,6 +66,12 @@ extern "C" { /**< KASUMI PMD device name */ #define CRYPTODEV_NAME_ZUC_PMD crypto_zuc /**< KASUMI PMD device name */ +#define CRYPTODEV_NAME_ARMV8_PMD crypto_armv8 +/**< ARMv8 Crypto PMD device name */ +#define CRYPTODEV_NAME_SCHEDULER_PMD crypto_scheduler +/**< Scheduler Crypto PMD device name */ +#define CRYPTODEV_NAME_DPAA2_SEC_PMD cryptodev_dpaa2_sec_pmd +/**< NXP DPAA2 - SEC PMD device name */ /** Crypto device type */ enum rte_cryptodev_type { @@ -77,6 +83,9 @@ enum rte_cryptodev_type { RTE_CRYPTODEV_KASUMI_PMD, /**< KASUMI PMD */ RTE_CRYPTODEV_ZUC_PMD, /**< ZUC PMD */ RTE_CRYPTODEV_OPENSSL_PMD, /**< OpenSSL PMD */ + RTE_CRYPTODEV_ARMV8_PMD, /**< ARMv8 crypto PMD */ + RTE_CRYPTODEV_SCHEDULER_PMD, /**< Crypto Scheduler PMD */ + RTE_CRYPTODEV_DPAA2_SEC_PMD, /**< NXP DPAA2 - SEC PMD */ }; extern const char **rte_cyptodev_names; @@ -110,6 +119,20 @@ extern const char **rte_cyptodev_names; #endif /** + * Crypto parameters range description + */ +struct rte_crypto_param_range { + uint16_t min; /**< minimum size */ + uint16_t max; /**< maximum size */ + uint16_t increment; + /**< if a range of sizes are supported, + * this parameter is used to indicate + * increments in byte size that are supported + * between the minimum and maximum + */ +}; + +/** * Symmetric Crypto Capability */ struct rte_cryptodev_symmetric_capability { @@ -122,35 +145,11 @@ struct rte_cryptodev_symmetric_capability { /**< authentication algorithm */ uint16_t block_size; /**< algorithm block size */ - struct { - uint16_t min; /**< minimum key size */ - uint16_t max; /**< maximum key size */ - uint16_t increment; - /**< if a range of sizes are supported, - * this parameter is used to indicate - * increments in byte size that are supported - * between the minimum and maximum */ - } key_size; + struct rte_crypto_param_range key_size; /**< auth key size range */ - struct { - uint16_t min; /**< minimum digest size */ - uint16_t max; /**< maximum digest size */ - uint16_t increment; - /**< if a range of sizes are supported, - * this parameter is used to indicate - * increments in byte size that are supported - * between the minimum and maximum */ - } digest_size; + struct rte_crypto_param_range digest_size; /**< digest size range */ - struct { - uint16_t min; /**< minimum aad size */ - uint16_t max; /**< maximum aad size */ - uint16_t increment; - /**< if a range of sizes are supported, - * this parameter is used to indicate - * increments in byte size that are supported - * between the minimum and maximum */ - } aad_size; + struct rte_crypto_param_range aad_size; /**< Additional authentication data size range */ } auth; /**< Symmetric Authentication transform capabilities */ @@ -159,25 +158,9 @@ struct rte_cryptodev_symmetric_capability { /**< cipher algorithm */ uint16_t block_size; /**< algorithm block size */ - struct { - uint16_t min; /**< minimum key size */ - uint16_t max; /**< maximum key size */ - uint16_t increment; - /**< if a range of sizes are supported, - * this parameter is used to indicate - * increments in byte size that are supported - * between the minimum and maximum */ - } key_size; + struct rte_crypto_param_range key_size; /**< cipher key size range */ - struct { - uint16_t min; /**< minimum iv size */ - uint16_t max; /**< maximum iv size */ - uint16_t increment; - /**< if a range of sizes are supported, - * this parameter is used to indicate - * increments in byte size that are supported - * between the minimum and maximum */ - } iv_size; + struct rte_crypto_param_range iv_size; /**< Initialisation vector data size range */ } cipher; /**< Symmetric Cipher transform capabilities */ @@ -196,6 +179,94 @@ struct rte_cryptodev_capabilities { }; }; +/** Structure used to describe crypto algorithms */ +struct rte_cryptodev_sym_capability_idx { + enum rte_crypto_sym_xform_type type; + union { + enum rte_crypto_cipher_algorithm cipher; + enum rte_crypto_auth_algorithm auth; + } algo; +}; + +/** + * Provide capabilities available for defined device and algorithm + * + * @param dev_id The identifier of the device. + * @param idx Description of crypto algorithms. + * + * @return + * - Return description of the symmetric crypto capability if exist. + * - Return NULL if the capability not exist. + */ +const struct rte_cryptodev_symmetric_capability * +rte_cryptodev_sym_capability_get(uint8_t dev_id, + const struct rte_cryptodev_sym_capability_idx *idx); + +/** + * Check if key size and initial vector are supported + * in crypto cipher capability + * + * @param capability Description of the symmetric crypto capability. + * @param key_size Cipher key size. + * @param iv_size Cipher initial vector size. + * + * @return + * - Return 0 if the parameters are in range of the capability. + * - Return -1 if the parameters are out of range of the capability. + */ +int +rte_cryptodev_sym_capability_check_cipher( + const struct rte_cryptodev_symmetric_capability *capability, + uint16_t key_size, uint16_t iv_size); + +/** + * Check if key size and initial vector are supported + * in crypto auth capability + * + * @param capability Description of the symmetric crypto capability. + * @param key_size Auth key size. + * @param digest_size Auth digest size. + * @param aad_size Auth aad size. + * + * @return + * - Return 0 if the parameters are in range of the capability. + * - Return -1 if the parameters are out of range of the capability. + */ +int +rte_cryptodev_sym_capability_check_auth( + const struct rte_cryptodev_symmetric_capability *capability, + uint16_t key_size, uint16_t digest_size, uint16_t aad_size); + +/** + * Provide the cipher algorithm enum, given an algorithm string + * + * @param algo_enum A pointer to the cipher algorithm + * enum to be filled + * @param algo_string Authentication algo string + * + * @return + * - Return -1 if string is not valid + * - Return 0 is the string is valid + */ +int +rte_cryptodev_get_cipher_algo_enum(enum rte_crypto_cipher_algorithm *algo_enum, + const char *algo_string); + +/** + * Provide the authentication algorithm enum, given an algorithm string + * + * @param algo_enum A pointer to the authentication algorithm + * enum to be filled + * @param algo_string Authentication algo string + * + * @return + * - Return -1 if string is not valid + * - Return 0 is the string is valid + */ +int +rte_cryptodev_get_auth_algo_enum(enum rte_crypto_auth_algorithm *algo_enum, + const char *algo_string); + /** Macro used at end of crypto PMD list */ #define RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() \ { RTE_CRYPTO_OP_TYPE_UNDEFINED } @@ -225,6 +296,14 @@ struct rte_cryptodev_capabilities { /**< Utilises CPU AES-NI instructions */ #define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7) /**< Operations are off-loaded to an external hardware accelerator */ +#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8) +/**< Utilises CPU SIMD AVX512 instructions */ +#define RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER (1ULL << 9) +/**< Scatter-gather mbufs are supported */ +#define RTE_CRYPTODEV_FF_CPU_NEON (1ULL << 10) +/**< Utilises CPU NEON instructions */ +#define RTE_CRYPTODEV_FF_CPU_ARM_CE (1ULL << 11) +/**< Utilises ARM CPU Cryptographic Extensions */ /** @@ -256,6 +335,10 @@ struct rte_cryptodev_info { struct { unsigned max_nb_sessions; /**< Maximum number of sessions supported by device. */ + unsigned int max_nb_sessions_per_qp; + /**< Maximum number of sessions per queue pair. + * Default 0 for infinite sessions + */ } sym; }; @@ -300,6 +383,8 @@ struct rte_cryptodev_stats { /**< Total error count on operations dequeued */ }; +#define RTE_CRYPTODEV_NAME_MAX_LEN (64) +/**< Max length of name of crypto PMD */ #define RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS 8 #define RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS 2048 @@ -311,6 +396,7 @@ struct rte_crypto_vdev_init_params { unsigned max_nb_queue_pairs; unsigned max_nb_sessions; uint8_t socket_id; + char name[RTE_CRYPTODEV_NAME_MAX_LEN]; }; /** @@ -365,8 +451,30 @@ rte_cryptodev_get_dev_id(const char *name); extern uint8_t rte_cryptodev_count(void); +/** + * Get number of crypto device defined type. + * + * @param type type of device. + * + * @return + * Returns number of crypto device. + */ extern uint8_t rte_cryptodev_count_devtype(enum rte_cryptodev_type type); + +/** + * Get number and identifiers of attached crypto device. + * + * @param dev_name device name. + * @param devices output devices identifiers. + * @param nb_devices maximal number of devices. + * + * @return + * Returns number of attached crypto device. + */ +uint8_t +rte_cryptodev_devices_get(const char *dev_name, uint8_t *devices, + uint8_t nb_devices); /* * Return the NUMA socket to which a device is connected * @@ -621,8 +729,8 @@ struct rte_cryptodev { /**< Functions exported by PMD */ uint64_t feature_flags; /**< Supported features */ - struct rte_pci_device *pci_dev; - /**< PCI info. supplied by probing */ + struct rte_device *device; + /**< Backing device */ enum rte_cryptodev_type dev_type; /**< Crypto device type */ @@ -635,10 +743,6 @@ struct rte_cryptodev { /**< Flag indicating the device is attached */ } __rte_cache_aligned; - -#define RTE_CRYPTODEV_NAME_MAX_LEN (64) -/**< Max length of name of crypto PMD */ - /** * * The data part, with no function pointers, associated with each device. @@ -818,6 +922,36 @@ extern struct rte_cryptodev_sym_session * rte_cryptodev_sym_session_free(uint8_t dev_id, struct rte_cryptodev_sym_session *session); +/** + * Attach queue pair with sym session. + * + * @param qp_id Queue pair to which session will be attached. + * @param session Session pointer previously allocated by + * *rte_cryptodev_sym_session_create*. + * + * @return + * - On success, zero. + * - On failure, a negative value. + */ +int +rte_cryptodev_queue_pair_attach_sym_session(uint16_t qp_id, + struct rte_cryptodev_sym_session *session); + +/** + * Detach queue pair with sym session. + * + * @param qp_id Queue pair to which session is attached. + * @param session Session pointer previously allocated by + * *rte_cryptodev_sym_session_create*. + * + * @return + * - On success, zero. + * - On failure, a negative value. + */ +int +rte_cryptodev_queue_pair_detach_sym_session(uint16_t qp_id, + struct rte_cryptodev_sym_session *session); + #ifdef __cplusplus } |