From 5d308865d0783d0cd70f7453c77980835ac5648e Mon Sep 17 00:00:00 2001 From: Angelo Mantellini Date: Wed, 21 Mar 2018 14:16:02 +0100 Subject: update android-sdk. Now it is possible to compile with clang Change-Id: I156aa48dd90467a2a7540eec11839c0111b13bd2 Signed-off-by: Angelo Mantellini --- external/libcurl_android/jni/libcurl/lib/pop3.c | 2339 ----------------------- 1 file changed, 2339 deletions(-) delete mode 100755 external/libcurl_android/jni/libcurl/lib/pop3.c (limited to 'external/libcurl_android/jni/libcurl/lib/pop3.c') diff --git a/external/libcurl_android/jni/libcurl/lib/pop3.c b/external/libcurl_android/jni/libcurl/lib/pop3.c deleted file mode 100755 index dc64f810..00000000 --- a/external/libcurl_android/jni/libcurl/lib/pop3.c +++ /dev/null @@ -1,2339 +0,0 @@ -/*************************************************************************** - * _ _ ____ _ - * Project ___| | | | _ \| | - * / __| | | | |_) | | - * | (__| |_| | _ <| |___ - * \___|\___/|_| \_\_____| - * - * Copyright (C) 1998 - 2014, Daniel Stenberg, , et al. - * - * This software is licensed as described in the file COPYING, which - * you should have received as part of this distribution. The terms - * are also available at http://curl.haxx.se/docs/copyright.html. - * - * You may opt to use, copy, modify, merge, publish, distribute and/or sell - * copies of the Software, and permit persons to whom the Software is - * furnished to do so, under the terms of the COPYING file. - * - * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY - * KIND, either express or implied. - * - * RFC1734 POP3 Authentication - * RFC1939 POP3 protocol - * RFC2195 CRAM-MD5 authentication - * RFC2384 POP URL Scheme - * RFC2449 POP3 Extension Mechanism - * RFC2595 Using TLS with IMAP, POP3 and ACAP - * RFC2831 DIGEST-MD5 authentication - * RFC4422 Simple Authentication and Security Layer (SASL) - * RFC4616 PLAIN authentication - * RFC4752 The Kerberos V5 ("GSSAPI") SASL Mechanism - * RFC5034 POP3 SASL Authentication Mechanism - * RFC6749 OAuth 2.0 Authorization Framework - * Draft LOGIN SASL Mechanism - * - ***************************************************************************/ - -#include "curl_setup.h" - -#ifndef CURL_DISABLE_POP3 - -#ifdef HAVE_NETINET_IN_H -#include -#endif -#ifdef HAVE_ARPA_INET_H -#include -#endif -#ifdef HAVE_UTSNAME_H -#include -#endif -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef __VMS -#include -#include -#endif - -#if (defined(NETWARE) && defined(__NOVELL_LIBC__)) -#undef in_addr_t -#define in_addr_t unsigned long -#endif - -#include -#include "urldata.h" -#include "sendf.h" -#include "if2ip.h" -#include "hostip.h" -#include "progress.h" -#include "transfer.h" -#include "escape.h" -#include "http.h" /* for HTTP proxy tunnel stuff */ -#include "socks.h" -#include "pop3.h" - -#include "strtoofft.h" -#include "strequal.h" -#include "vtls/vtls.h" -#include "connect.h" -#include "strerror.h" -#include "select.h" -#include "multiif.h" -#include "url.h" -#include "rawstr.h" -#include "curl_sasl.h" -#include "curl_md5.h" -#include "warnless.h" - -#define _MPRINTF_REPLACE /* use our functions only */ -#include - -#include "curl_memory.h" -/* The last #include file should be: */ -#include "memdebug.h" - -/* Local API functions */ -static CURLcode pop3_regular_transfer(struct connectdata *conn, bool *done); -static CURLcode pop3_do(struct connectdata *conn, bool *done); -static CURLcode pop3_done(struct connectdata *conn, CURLcode status, - bool premature); -static CURLcode pop3_connect(struct connectdata *conn, bool *done); -static CURLcode pop3_disconnect(struct connectdata *conn, bool dead); -static CURLcode pop3_multi_statemach(struct connectdata *conn, bool *done); -static int pop3_getsock(struct connectdata *conn, curl_socket_t *socks, - int numsocks); -static CURLcode pop3_doing(struct connectdata *conn, bool *dophase_done); -static CURLcode pop3_setup_connection(struct connectdata *conn); -static CURLcode pop3_parse_url_options(struct connectdata *conn); -static CURLcode pop3_parse_url_path(struct connectdata *conn); -static CURLcode pop3_parse_custom_request(struct connectdata *conn); -static CURLcode pop3_calc_sasl_details(struct connectdata *conn, - const char **mech, - char **initresp, size_t *len, - pop3state *state1, pop3state *state2); - -/* - * POP3 protocol handler. - */ - -const struct Curl_handler Curl_handler_pop3 = { - "POP3", /* scheme */ - pop3_setup_connection, /* setup_connection */ - pop3_do, /* do_it */ - pop3_done, /* done */ - ZERO_NULL, /* do_more */ - pop3_connect, /* connect_it */ - pop3_multi_statemach, /* connecting */ - pop3_doing, /* doing */ - pop3_getsock, /* proto_getsock */ - pop3_getsock, /* doing_getsock */ - ZERO_NULL, /* domore_getsock */ - ZERO_NULL, /* perform_getsock */ - pop3_disconnect, /* disconnect */ - ZERO_NULL, /* readwrite */ - PORT_POP3, /* defport */ - CURLPROTO_POP3, /* protocol */ - PROTOPT_CLOSEACTION | PROTOPT_NOURLQUERY /* flags */ -}; - -#ifdef USE_SSL -/* - * POP3S protocol handler. - */ - -const struct Curl_handler Curl_handler_pop3s = { - "POP3S", /* scheme */ - pop3_setup_connection, /* setup_connection */ - pop3_do, /* do_it */ - pop3_done, /* done */ - ZERO_NULL, /* do_more */ - pop3_connect, /* connect_it */ - pop3_multi_statemach, /* connecting */ - pop3_doing, /* doing */ - pop3_getsock, /* proto_getsock */ - pop3_getsock, /* doing_getsock */ - ZERO_NULL, /* domore_getsock */ - ZERO_NULL, /* perform_getsock */ - pop3_disconnect, /* disconnect */ - ZERO_NULL, /* readwrite */ - PORT_POP3S, /* defport */ - CURLPROTO_POP3S, /* protocol */ - PROTOPT_CLOSEACTION | PROTOPT_SSL - | PROTOPT_NOURLQUERY /* flags */ -}; -#endif - -#ifndef CURL_DISABLE_HTTP -/* - * HTTP-proxyed POP3 protocol handler. - */ - -static const struct Curl_handler Curl_handler_pop3_proxy = { - "POP3", /* scheme */ - Curl_http_setup_conn, /* setup_connection */ - Curl_http, /* do_it */ - Curl_http_done, /* done */ - ZERO_NULL, /* do_more */ - ZERO_NULL, /* connect_it */ - ZERO_NULL, /* connecting */ - ZERO_NULL, /* doing */ - ZERO_NULL, /* proto_getsock */ - ZERO_NULL, /* doing_getsock */ - ZERO_NULL, /* domore_getsock */ - ZERO_NULL, /* perform_getsock */ - ZERO_NULL, /* disconnect */ - ZERO_NULL, /* readwrite */ - PORT_POP3, /* defport */ - CURLPROTO_HTTP, /* protocol */ - PROTOPT_NONE /* flags */ -}; - -#ifdef USE_SSL -/* - * HTTP-proxyed POP3S protocol handler. - */ - -static const struct Curl_handler Curl_handler_pop3s_proxy = { - "POP3S", /* scheme */ - Curl_http_setup_conn, /* setup_connection */ - Curl_http, /* do_it */ - Curl_http_done, /* done */ - ZERO_NULL, /* do_more */ - ZERO_NULL, /* connect_it */ - ZERO_NULL, /* connecting */ - ZERO_NULL, /* doing */ - ZERO_NULL, /* proto_getsock */ - ZERO_NULL, /* doing_getsock */ - ZERO_NULL, /* domore_getsock */ - ZERO_NULL, /* perform_getsock */ - ZERO_NULL, /* disconnect */ - ZERO_NULL, /* readwrite */ - PORT_POP3S, /* defport */ - CURLPROTO_HTTP, /* protocol */ - PROTOPT_NONE /* flags */ -}; -#endif -#endif - -#ifdef USE_SSL -static void pop3_to_pop3s(struct connectdata *conn) -{ - conn->handler = &Curl_handler_pop3s; -} -#else -#define pop3_to_pop3s(x) Curl_nop_stmt -#endif - -/*********************************************************************** - * - * pop3_endofresp() - * - * Checks for an ending POP3 status code at the start of the given string, but - * also detects the APOP timestamp from the server greeting and various - * capabilities from the CAPA response including the supported authentication - * types and allowed SASL mechanisms. - */ -static bool pop3_endofresp(struct connectdata *conn, char *line, size_t len, - int *resp) -{ - struct pop3_conn *pop3c = &conn->proto.pop3c; - - /* Do we have an error response? */ - if(len >= 4 && !memcmp("-ERR", line, 4)) { - *resp = '-'; - - return TRUE; - } - - /* Are we processing CAPA command responses? */ - if(pop3c->state == POP3_CAPA) { - /* Do we have the terminating line? */ - if(len >= 1 && !memcmp(line, ".", 1)) - *resp = '+'; - else - *resp = '*'; - - return TRUE; - } - - /* Do we have a command or continuation response? */ - if((len >= 3 && !memcmp("+OK", line, 3)) || - (len >= 1 && !memcmp("+", line, 1))) { - *resp = '+'; - - return TRUE; - } - - return FALSE; /* Nothing for us */ -} - -/*********************************************************************** - * - * pop3_get_message() - * - * Gets the authentication message from the response buffer. - */ -static void pop3_get_message(char *buffer, char** outptr) -{ - size_t len = 0; - char* message = NULL; - - /* Find the start of the message */ - for(message = buffer + 2; *message == ' ' || *message == '\t'; message++) - ; - - /* Find the end of the message */ - for(len = strlen(message); len--;) - if(message[len] != '\r' && message[len] != '\n' && message[len] != ' ' && - message[len] != '\t') - break; - - /* Terminate the message */ - if(++len) { - message[len] = '\0'; - } - - *outptr = message; -} - -/*********************************************************************** - * - * state() - * - * This is the ONLY way to change POP3 state! - */ -static void state(struct connectdata *conn, pop3state newstate) -{ - struct pop3_conn *pop3c = &conn->proto.pop3c; -#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) - /* for debug purposes */ - static const char * const names[] = { - "STOP", - "SERVERGREET", - "CAPA", - "STARTTLS", - "UPGRADETLS", - "AUTH_PLAIN", - "AUTH_LOGIN", - "AUTH_LOGIN_PASSWD", - "AUTH_CRAMMD5", - "AUTH_DIGESTMD5", - "AUTH_DIGESTMD5_RESP", - "AUTH_NTLM", - "AUTH_NTLM_TYPE2MSG", - "AUTH_GSSAPI", - "AUTH_GSSAPI_TOKEN", - "AUTH_GSSAPI_NO_DATA", - "AUTH_XOAUTH2", - "AUTH_CANCEL", - "AUTH_FINAL", - "APOP", - "USER", - "PASS", - "COMMAND", - "QUIT", - /* LAST */ - }; - - if(pop3c->state != newstate) - infof(conn->data, "POP3 %p state change from %s to %s\n", - (void *)pop3c, names[pop3c->state], names[newstate]); -#endif - - pop3c->state = newstate; -} - -/*********************************************************************** - * - * pop3_perform_capa() - * - * Sends the CAPA command in order to obtain a list of server side supported - * capabilities. - */ -static CURLcode pop3_perform_capa(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - - pop3c->authmechs = 0; /* No known authentication mechanisms yet */ - pop3c->authused = 0; /* Clear the authentication mechanism used */ - pop3c->tls_supported = FALSE; /* Clear the TLS capability */ - - /* Send the CAPA command */ - result = Curl_pp_sendf(&pop3c->pp, "%s", "CAPA"); - - if(!result) - state(conn, POP3_CAPA); - - return result; -} - -/*********************************************************************** - * - * pop3_perform_starttls() - * - * Sends the STLS command to start the upgrade to TLS. - */ -static CURLcode pop3_perform_starttls(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - - /* Send the STLS command */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "STLS"); - - if(!result) - state(conn, POP3_STARTTLS); - - return result; -} - -/*********************************************************************** - * - * pop3_perform_upgrade_tls() - * - * Performs the upgrade to TLS. - */ -static CURLcode pop3_perform_upgrade_tls(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - - /* Start the SSL connection */ - result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &pop3c->ssldone); - - if(!result) { - if(pop3c->state != POP3_UPGRADETLS) - state(conn, POP3_UPGRADETLS); - - if(pop3c->ssldone) { - pop3_to_pop3s(conn); - result = pop3_perform_capa(conn); - } - } - - return result; -} - -/*********************************************************************** - * - * pop3_perform_user() - * - * Sends a clear text USER command to authenticate with. - */ -static CURLcode pop3_perform_user(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - - /* Check we have a username and password to authenticate with and end the - connect phase if we don't */ - if(!conn->bits.user_passwd) { - state(conn, POP3_STOP); - - return result; - } - - /* Send the USER command */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "USER %s", - conn->user ? conn->user : ""); - if(!result) - state(conn, POP3_USER); - - return result; -} - -#ifndef CURL_DISABLE_CRYPTO_AUTH -/*********************************************************************** - * - * pop3_perform_apop() - * - * Sends an APOP command to authenticate with. - */ -static CURLcode pop3_perform_apop(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - size_t i; - MD5_context *ctxt; - unsigned char digest[MD5_DIGEST_LEN]; - char secret[2 * MD5_DIGEST_LEN + 1]; - - /* Check we have a username and password to authenticate with and end the - connect phase if we don't */ - if(!conn->bits.user_passwd) { - state(conn, POP3_STOP); - - return result; - } - - /* Create the digest */ - ctxt = Curl_MD5_init(Curl_DIGEST_MD5); - if(!ctxt) - return CURLE_OUT_OF_MEMORY; - - Curl_MD5_update(ctxt, (const unsigned char *) pop3c->apoptimestamp, - curlx_uztoui(strlen(pop3c->apoptimestamp))); - - Curl_MD5_update(ctxt, (const unsigned char *) conn->passwd, - curlx_uztoui(strlen(conn->passwd))); - - /* Finalise the digest */ - Curl_MD5_final(ctxt, digest); - - /* Convert the calculated 16 octet digest into a 32 byte hex string */ - for(i = 0; i < MD5_DIGEST_LEN; i++) - snprintf(&secret[2 * i], 3, "%02x", digest[i]); - - result = Curl_pp_sendf(&pop3c->pp, "APOP %s %s", conn->user, secret); - - if(!result) - state(conn, POP3_APOP); - - return result; -} -#endif - -/*********************************************************************** - * - * pop3_perform_auth() - * - * Sends an AUTH command allowing the client to login with the given SASL - * authentication mechanism. - */ -static CURLcode pop3_perform_auth(struct connectdata *conn, - const char *mech, - const char *initresp, size_t len, - pop3state state1, pop3state state2) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - - if(initresp && 8 + strlen(mech) + len <= 255) { /* AUTH ... */ - /* Send the AUTH command with the initial response */ - result = Curl_pp_sendf(&pop3c->pp, "AUTH %s %s", mech, initresp); - - if(!result) - state(conn, state2); - } - else { - /* Send the AUTH command */ - result = Curl_pp_sendf(&pop3c->pp, "AUTH %s", mech); - - if(!result) - state(conn, state1); - } - - return result; -} - -/*********************************************************************** - * - * pop3_perform_authentication() - * - * Initiates the authentication sequence, with the appropriate SASL - * authentication mechanism, falling back to APOP and clear text should a - * common mechanism not be available between the client and server. - */ -static CURLcode pop3_perform_authentication(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - const char *mech = NULL; - char *initresp = NULL; - size_t len = 0; - pop3state state1 = POP3_STOP; - pop3state state2 = POP3_STOP; - - /* Check we have a username and password to authenticate with and end the - connect phase if we don't */ - if(!conn->bits.user_passwd) { - state(conn, POP3_STOP); - - return result; - } - - /* Calculate the SASL login details */ - if(pop3c->authtypes & POP3_TYPE_SASL) - result = pop3_calc_sasl_details(conn, &mech, &initresp, &len, &state1, - &state2); - - if(!result) { - if(mech && (pop3c->preftype & POP3_TYPE_SASL)) { - /* Perform SASL based authentication */ - result = pop3_perform_auth(conn, mech, initresp, len, state1, state2); - - Curl_safefree(initresp); - } -#ifndef CURL_DISABLE_CRYPTO_AUTH - else if((pop3c->authtypes & POP3_TYPE_APOP) && - (pop3c->preftype & POP3_TYPE_APOP)) - /* Perform APOP authentication */ - result = pop3_perform_apop(conn); -#endif - else if((pop3c->authtypes & POP3_TYPE_CLEARTEXT) && - (pop3c->preftype & POP3_TYPE_CLEARTEXT)) - /* Perform clear text authentication */ - result = pop3_perform_user(conn); - else { - /* Other mechanisms not supported */ - infof(conn->data, "No known authentication mechanisms supported!\n"); - result = CURLE_LOGIN_DENIED; - } - } - - return result; -} - -/*********************************************************************** - * - * pop3_perform_command() - * - * Sends a POP3 based command. - */ -static CURLcode pop3_perform_command(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct POP3 *pop3 = data->req.protop; - const char *command = NULL; - - /* Calculate the default command */ - if(pop3->id[0] == '\0' || conn->data->set.ftp_list_only) { - command = "LIST"; - - if(pop3->id[0] != '\0') - /* Message specific LIST so skip the BODY transfer */ - pop3->transfer = FTPTRANSFER_INFO; - } - else - command = "RETR"; - - /* Send the command */ - if(pop3->id[0] != '\0') - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s %s", - (pop3->custom && pop3->custom[0] != '\0' ? - pop3->custom : command), pop3->id); - else - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", - (pop3->custom && pop3->custom[0] != '\0' ? - pop3->custom : command)); - - if(!result) - state(conn, POP3_COMMAND); - - return result; -} - -/*********************************************************************** - * - * pop3_perform_quit() - * - * Performs the quit action prior to sclose() be called. - */ -static CURLcode pop3_perform_quit(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - - /* Send the QUIT command */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "QUIT"); - - if(!result) - state(conn, POP3_QUIT); - - return result; -} - -/* For the initial server greeting */ -static CURLcode pop3_state_servergreet_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct pop3_conn *pop3c = &conn->proto.pop3c; - const char *line = data->state.buffer; - size_t len = strlen(line); - size_t i; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Got unexpected pop3-server response"); - result = CURLE_FTP_WEIRD_SERVER_REPLY; - } - else { - /* Does the server support APOP authentication? */ - if(len >= 4 && line[len - 2] == '>') { - /* Look for the APOP timestamp */ - for(i = 3; i < len - 2; ++i) { - if(line[i] == '<') { - /* Calculate the length of the timestamp */ - size_t timestamplen = len - 1 - i; - if(!timestamplen) - break; - - /* Allocate some memory for the timestamp */ - pop3c->apoptimestamp = (char *)calloc(1, timestamplen + 1); - - if(!pop3c->apoptimestamp) - break; - - /* Copy the timestamp */ - memcpy(pop3c->apoptimestamp, line + i, timestamplen); - pop3c->apoptimestamp[timestamplen] = '\0'; - - /* Store the APOP capability */ - pop3c->authtypes |= POP3_TYPE_APOP; - break; - } - } - } - - result = pop3_perform_capa(conn); - } - - return result; -} - -/* For CAPA responses */ -static CURLcode pop3_state_capa_resp(struct connectdata *conn, int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct pop3_conn *pop3c = &conn->proto.pop3c; - const char *line = data->state.buffer; - size_t len = strlen(line); - size_t wordlen; - - (void)instate; /* no use for this yet */ - - /* Do we have a untagged response? */ - if(pop3code == '*') { - /* Does the server support the STLS capability? */ - if(len >= 4 && !memcmp(line, "STLS", 4)) - pop3c->tls_supported = TRUE; - - /* Does the server support clear text authentication? */ - else if(len >= 4 && !memcmp(line, "USER", 4)) - pop3c->authtypes |= POP3_TYPE_CLEARTEXT; - - /* Does the server support SASL based authentication? */ - else if(len >= 5 && !memcmp(line, "SASL ", 5)) { - pop3c->authtypes |= POP3_TYPE_SASL; - - /* Advance past the SASL keyword */ - line += 5; - len -= 5; - - /* Loop through the data line */ - for(;;) { - while(len && - (*line == ' ' || *line == '\t' || - *line == '\r' || *line == '\n')) { - - line++; - len--; - } - - if(!len) - break; - - /* Extract the word */ - for(wordlen = 0; wordlen < len && line[wordlen] != ' ' && - line[wordlen] != '\t' && line[wordlen] != '\r' && - line[wordlen] != '\n';) - wordlen++; - - /* Test the word for a matching authentication mechanism */ - if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_LOGIN)) - pop3c->authmechs |= SASL_MECH_LOGIN; - else if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_PLAIN)) - pop3c->authmechs |= SASL_MECH_PLAIN; - else if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_CRAM_MD5)) - pop3c->authmechs |= SASL_MECH_CRAM_MD5; - else if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_DIGEST_MD5)) - pop3c->authmechs |= SASL_MECH_DIGEST_MD5; - else if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_GSSAPI)) - pop3c->authmechs |= SASL_MECH_GSSAPI; - else if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_EXTERNAL)) - pop3c->authmechs |= SASL_MECH_EXTERNAL; - else if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_NTLM)) - pop3c->authmechs |= SASL_MECH_NTLM; - else if(sasl_mech_equal(line, wordlen, SASL_MECH_STRING_XOAUTH2)) - pop3c->authmechs |= SASL_MECH_XOAUTH2; - - line += wordlen; - len -= wordlen; - } - } - } - else if(pop3code == '+') { - if(data->set.use_ssl && !conn->ssl[FIRSTSOCKET].use) { - /* We don't have a SSL/TLS connection yet, but SSL is requested */ - if(pop3c->tls_supported) - /* Switch to TLS connection now */ - result = pop3_perform_starttls(conn); - else if(data->set.use_ssl == CURLUSESSL_TRY) - /* Fallback and carry on with authentication */ - result = pop3_perform_authentication(conn); - else { - failf(data, "STLS not supported."); - result = CURLE_USE_SSL_FAILED; - } - } - else - result = pop3_perform_authentication(conn); - } - else { - /* Clear text is supported when CAPA isn't recognised */ - pop3c->authtypes |= POP3_TYPE_CLEARTEXT; - - result = pop3_perform_authentication(conn); - } - - return result; -} - -/* For STARTTLS responses */ -static CURLcode pop3_state_starttls_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - if(data->set.use_ssl != CURLUSESSL_TRY) { - failf(data, "STARTTLS denied. %c", pop3code); - result = CURLE_USE_SSL_FAILED; - } - else - result = pop3_perform_authentication(conn); - } - else - result = pop3_perform_upgrade_tls(conn); - - return result; -} - -/* For AUTH PLAIN (without initial response) responses */ -static CURLcode pop3_state_auth_plain_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - size_t len = 0; - char *plainauth = NULL; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied. %c", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Create the authorisation message */ - result = Curl_sasl_create_plain_message(data, conn->user, conn->passwd, - &plainauth, &len); - if(!result && plainauth) { - /* Send the message */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", plainauth); - - if(!result) - state(conn, POP3_AUTH_FINAL); - } - } - - Curl_safefree(plainauth); - - return result; -} - -/* For AUTH LOGIN (without initial response) responses */ -static CURLcode pop3_state_auth_login_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - size_t len = 0; - char *authuser = NULL; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Create the user message */ - result = Curl_sasl_create_login_message(data, conn->user, - &authuser, &len); - if(!result && authuser) { - /* Send the user */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", authuser); - - if(!result) - state(conn, POP3_AUTH_LOGIN_PASSWD); - } - } - - Curl_safefree(authuser); - - return result; -} - -/* For AUTH LOGIN user entry responses */ -static CURLcode pop3_state_auth_login_password_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - size_t len = 0; - char *authpasswd = NULL; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Create the password message */ - result = Curl_sasl_create_login_message(data, conn->passwd, - &authpasswd, &len); - if(!result && authpasswd) { - /* Send the password */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", authpasswd); - - if(!result) - state(conn, POP3_AUTH_FINAL); - } - } - - Curl_safefree(authpasswd); - - return result; -} - -#ifndef CURL_DISABLE_CRYPTO_AUTH -/* For AUTH CRAM-MD5 responses */ -static CURLcode pop3_state_auth_cram_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - char *chlg = NULL; - char *chlg64 = NULL; - char *rplyb64 = NULL; - size_t len = 0; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - return CURLE_LOGIN_DENIED; - } - - /* Get the challenge message */ - pop3_get_message(data->state.buffer, &chlg64); - - /* Decode the challenge message */ - result = Curl_sasl_decode_cram_md5_message(chlg64, &chlg, &len); - if(result) { - /* Send the cancellation */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "*"); - - if(!result) - state(conn, POP3_AUTH_CANCEL); - } - else { - /* Create the response message */ - result = Curl_sasl_create_cram_md5_message(data, chlg, conn->user, - conn->passwd, &rplyb64, &len); - if(!result && rplyb64) { - /* Send the response */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", rplyb64); - - if(!result) - state(conn, POP3_AUTH_FINAL); - } - } - - Curl_safefree(chlg); - Curl_safefree(rplyb64); - - return result; -} - -/* For AUTH DIGEST-MD5 challenge responses */ -static CURLcode pop3_state_auth_digest_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - char *chlg64 = NULL; - char *rplyb64 = NULL; - size_t len = 0; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - return CURLE_LOGIN_DENIED; - } - - /* Get the challenge message */ - pop3_get_message(data->state.buffer, &chlg64); - - /* Create the response message */ - result = Curl_sasl_create_digest_md5_message(data, chlg64, - conn->user, conn->passwd, - "pop", &rplyb64, &len); - if(result) { - if(result == CURLE_BAD_CONTENT_ENCODING) { - /* Send the cancellation */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "*"); - - if(!result) - state(conn, POP3_AUTH_CANCEL); - } - } - else { - /* Send the response */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", rplyb64); - - if(!result) - state(conn, POP3_AUTH_DIGESTMD5_RESP); - } - - Curl_safefree(rplyb64); - - return result; -} - -/* For AUTH DIGEST-MD5 challenge-response responses */ -static CURLcode pop3_state_auth_digest_resp_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Authentication failed: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Send an empty response */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", ""); - - if(!result) - state(conn, POP3_AUTH_FINAL); - } - - return result; -} -#endif - -#ifdef USE_NTLM -/* For AUTH NTLM (without initial response) responses */ -static CURLcode pop3_state_auth_ntlm_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - size_t len = 0; - char *type1msg = NULL; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Create the type-1 message */ - result = Curl_sasl_create_ntlm_type1_message(conn->user, conn->passwd, - &conn->ntlm, - &type1msg, &len); - if(!result && type1msg) { - /* Send the message */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", type1msg); - - if(!result) - state(conn, POP3_AUTH_NTLM_TYPE2MSG); - } - } - - Curl_safefree(type1msg); - - return result; -} - -/* For NTLM type-2 responses (sent in reponse to our type-1 message) */ -static CURLcode pop3_state_auth_ntlm_type2msg_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - char *type2msg = NULL; - char *type3msg = NULL; - size_t len = 0; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Get the type-2 message */ - pop3_get_message(data->state.buffer, &type2msg); - - /* Decode the type-2 message */ - result = Curl_sasl_decode_ntlm_type2_message(data, type2msg, &conn->ntlm); - if(result) { - /* Send the cancellation */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "*"); - - if(!result) - state(conn, POP3_AUTH_CANCEL); - } - else { - /* Create the type-3 message */ - result = Curl_sasl_create_ntlm_type3_message(data, conn->user, - conn->passwd, &conn->ntlm, - &type3msg, &len); - if(!result && type3msg) { - /* Send the message */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", type3msg); - - if(!result) - state(conn, POP3_AUTH_FINAL); - } - } - } - - Curl_safefree(type3msg); - - return result; -} -#endif - -#if defined(USE_WINDOWS_SSPI) -/* For AUTH GSSAPI (without initial response) responses */ -static CURLcode pop3_state_auth_gssapi_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct pop3_conn *pop3c = &conn->proto.pop3c; - size_t len = 0; - char *respmsg = NULL; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Create the initial response message */ - result = Curl_sasl_create_gssapi_user_message(data, conn->user, - conn->passwd, "pop", - pop3c->mutual_auth, - NULL, &conn->krb5, - &respmsg, &len); - if(!result && respmsg) { - /* Send the message */ - result = Curl_pp_sendf(&pop3c->pp, "%s", respmsg); - - if(!result) - state(conn, POP3_AUTH_GSSAPI_TOKEN); - } - } - - Curl_safefree(respmsg); - - return result; -} - -/* For AUTH GSSAPI user token responses */ -static CURLcode pop3_state_auth_gssapi_token_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct pop3_conn *pop3c = &conn->proto.pop3c; - char *chlgmsg = NULL; - char *respmsg = NULL; - size_t len = 0; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Get the challenge message */ - pop3_get_message(data->state.buffer, &chlgmsg); - - if(pop3c->mutual_auth) - /* Decode the user token challenge and create the optional response - message */ - result = Curl_sasl_create_gssapi_user_message(data, NULL, NULL, NULL, - pop3c->mutual_auth, - chlgmsg, &conn->krb5, - &respmsg, &len); - else - /* Decode the security challenge and create the response message */ - result = Curl_sasl_create_gssapi_security_message(data, chlgmsg, - &conn->krb5, - &respmsg, &len); - - if(result) { - if(result == CURLE_BAD_CONTENT_ENCODING) { - /* Send the cancellation */ - result = Curl_pp_sendf(&pop3c->pp, "%s", "*"); - - if(!result) - state(conn, POP3_AUTH_CANCEL); - } - } - else { - /* Send the response */ - if(respmsg) - result = Curl_pp_sendf(&pop3c->pp, "%s", respmsg); - else - result = Curl_pp_sendf(&pop3c->pp, "%s", ""); - - if(!result) - state(conn, (pop3c->mutual_auth ? POP3_AUTH_GSSAPI_NO_DATA : - POP3_AUTH_FINAL)); - } - } - - Curl_safefree(respmsg); - - return result; -} - -/* For AUTH GSSAPI no data responses */ -static CURLcode pop3_state_auth_gssapi_no_data_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - char *chlgmsg = NULL; - char *respmsg = NULL; - size_t len = 0; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Get the challenge message */ - pop3_get_message(data->state.buffer, &chlgmsg); - - /* Decode the security challenge and create the security message */ - result = Curl_sasl_create_gssapi_security_message(data, chlgmsg, - &conn->krb5, - &respmsg, &len); - if(result) { - if(result == CURLE_BAD_CONTENT_ENCODING) { - /* Send the cancellation */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", "*"); - - if(!result) - state(conn, POP3_AUTH_CANCEL); - } - } - else { - /* Send the response */ - if(respmsg) { - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", respmsg); - - if(!result) - state(conn, POP3_AUTH_FINAL); - } - } - } - - Curl_safefree(respmsg); - - return result; -} -#endif - -/* For AUTH XOAUTH2 (without initial response) responses */ -static CURLcode pop3_state_auth_xoauth2_resp(struct connectdata *conn, - int pop3code, pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - size_t len = 0; - char *xoauth = NULL; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else { - /* Create the authorisation message */ - result = Curl_sasl_create_xoauth2_message(conn->data, conn->user, - conn->xoauth2_bearer, - &xoauth, &len); - if(!result && xoauth) { - /* Send the message */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", xoauth); - - if(!result) - state(conn, POP3_AUTH_FINAL); - } - } - - Curl_safefree(xoauth); - - return result; -} - -/* For AUTH cancellation responses */ -static CURLcode pop3_state_auth_cancel_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct pop3_conn *pop3c = &conn->proto.pop3c; - const char *mech = NULL; - char *initresp = NULL; - size_t len = 0; - pop3state state1 = POP3_STOP; - pop3state state2 = POP3_STOP; - - (void)pop3code; - (void)instate; /* no use for this yet */ - - /* Remove the offending mechanism from the supported list */ - pop3c->authmechs ^= pop3c->authused; - - /* Calculate alternative SASL login details */ - result = pop3_calc_sasl_details(conn, &mech, &initresp, &len, &state1, - &state2); - - if(!result) { - /* Do we have any mechanisms left or can we fallback to another - authentication type? */ - if(mech) { - /* Retry SASL based authentication */ - result = pop3_perform_auth(conn, mech, initresp, len, state1, state2); - - Curl_safefree(initresp); - } -#ifndef CURL_DISABLE_CRYPTO_AUTH - else if((pop3c->authtypes & POP3_TYPE_APOP) && - (pop3c->preftype & POP3_TYPE_APOP)) - /* Perform APOP authentication */ - result = pop3_perform_apop(conn); -#endif - else if((pop3c->authtypes & POP3_TYPE_CLEARTEXT) && - (pop3c->preftype & POP3_TYPE_CLEARTEXT)) - /* Perform clear text authentication */ - result = pop3_perform_user(conn); - else { - failf(data, "Authentication cancelled"); - - result = CURLE_LOGIN_DENIED; - } - } - - return result; -} - -/* For final responses in the AUTH sequence */ -static CURLcode pop3_state_auth_final_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Authentication failed: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else - /* End of connect phase */ - state(conn, POP3_STOP); - - return result; -} - -#ifndef CURL_DISABLE_CRYPTO_AUTH -/* For APOP responses */ -static CURLcode pop3_state_apop_resp(struct connectdata *conn, int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Authentication failed: %d", pop3code); - result = CURLE_LOGIN_DENIED; - } - else - /* End of connect phase */ - state(conn, POP3_STOP); - - return result; -} -#endif - -/* For USER responses */ -static CURLcode pop3_state_user_resp(struct connectdata *conn, int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied. %c", pop3code); - result = CURLE_LOGIN_DENIED; - } - else - /* Send the PASS command */ - result = Curl_pp_sendf(&conn->proto.pop3c.pp, "PASS %s", - conn->passwd ? conn->passwd : ""); - if(!result) - state(conn, POP3_PASS); - - return result; -} - -/* For PASS responses */ -static CURLcode pop3_state_pass_resp(struct connectdata *conn, int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - failf(data, "Access denied. %c", pop3code); - result = CURLE_LOGIN_DENIED; - } - else - /* End of connect phase */ - state(conn, POP3_STOP); - - return result; -} - -/* For command responses */ -static CURLcode pop3_state_command_resp(struct connectdata *conn, - int pop3code, - pop3state instate) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct POP3 *pop3 = data->req.protop; - struct pop3_conn *pop3c = &conn->proto.pop3c; - struct pingpong *pp = &pop3c->pp; - - (void)instate; /* no use for this yet */ - - if(pop3code != '+') { - state(conn, POP3_STOP); - return CURLE_RECV_ERROR; - } - - /* This 'OK' line ends with a CR LF pair which is the two first bytes of the - EOB string so count this is two matching bytes. This is necessary to make - the code detect the EOB if the only data than comes now is %2e CR LF like - when there is no body to return. */ - pop3c->eob = 2; - - /* But since this initial CR LF pair is not part of the actual body, we set - the strip counter here so that these bytes won't be delivered. */ - pop3c->strip = 2; - - if(pop3->transfer == FTPTRANSFER_BODY) { - /* POP3 download */ - Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, NULL, -1, NULL); - - if(pp->cache) { - /* The header "cache" contains a bunch of data that is actually body - content so send it as such. Note that there may even be additional - "headers" after the body */ - - if(!data->set.opt_no_body) { - result = Curl_pop3_write(conn, pp->cache, pp->cache_size); - if(result) - return result; - } - - /* Free the cache */ - Curl_safefree(pp->cache); - - /* Reset the cache size */ - pp->cache_size = 0; - } - } - - /* End of DO phase */ - state(conn, POP3_STOP); - - return result; -} - -static CURLcode pop3_statemach_act(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - curl_socket_t sock = conn->sock[FIRSTSOCKET]; - int pop3code; - struct pop3_conn *pop3c = &conn->proto.pop3c; - struct pingpong *pp = &pop3c->pp; - size_t nread = 0; - - /* Busy upgrading the connection; right now all I/O is SSL/TLS, not POP3 */ - if(pop3c->state == POP3_UPGRADETLS) - return pop3_perform_upgrade_tls(conn); - - /* Flush any data that needs to be sent */ - if(pp->sendleft) - return Curl_pp_flushsend(pp); - - do { - /* Read the response from the server */ - result = Curl_pp_readresp(sock, pp, &pop3code, &nread); - if(result) - return result; - - if(!pop3code) - break; - - /* We have now received a full POP3 server response */ - switch(pop3c->state) { - case POP3_SERVERGREET: - result = pop3_state_servergreet_resp(conn, pop3code, pop3c->state); - break; - - case POP3_CAPA: - result = pop3_state_capa_resp(conn, pop3code, pop3c->state); - break; - - case POP3_STARTTLS: - result = pop3_state_starttls_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_PLAIN: - result = pop3_state_auth_plain_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_LOGIN: - result = pop3_state_auth_login_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_LOGIN_PASSWD: - result = pop3_state_auth_login_password_resp(conn, pop3code, - pop3c->state); - break; - -#ifndef CURL_DISABLE_CRYPTO_AUTH - case POP3_AUTH_CRAMMD5: - result = pop3_state_auth_cram_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_DIGESTMD5: - result = pop3_state_auth_digest_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_DIGESTMD5_RESP: - result = pop3_state_auth_digest_resp_resp(conn, pop3code, pop3c->state); - break; -#endif - -#ifdef USE_NTLM - case POP3_AUTH_NTLM: - result = pop3_state_auth_ntlm_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_NTLM_TYPE2MSG: - result = pop3_state_auth_ntlm_type2msg_resp(conn, pop3code, - pop3c->state); - break; -#endif - -#if defined(USE_WINDOWS_SSPI) - case POP3_AUTH_GSSAPI: - result = pop3_state_auth_gssapi_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_GSSAPI_TOKEN: - result = pop3_state_auth_gssapi_token_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_GSSAPI_NO_DATA: - result = pop3_state_auth_gssapi_no_data_resp(conn, pop3code, - pop3c->state); - break; -#endif - - case POP3_AUTH_XOAUTH2: - result = pop3_state_auth_xoauth2_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_CANCEL: - result = pop3_state_auth_cancel_resp(conn, pop3code, pop3c->state); - break; - - case POP3_AUTH_FINAL: - result = pop3_state_auth_final_resp(conn, pop3code, pop3c->state); - break; - -#ifndef CURL_DISABLE_CRYPTO_AUTH - case POP3_APOP: - result = pop3_state_apop_resp(conn, pop3code, pop3c->state); - break; -#endif - - case POP3_USER: - result = pop3_state_user_resp(conn, pop3code, pop3c->state); - break; - - case POP3_PASS: - result = pop3_state_pass_resp(conn, pop3code, pop3c->state); - break; - - case POP3_COMMAND: - result = pop3_state_command_resp(conn, pop3code, pop3c->state); - break; - - case POP3_QUIT: - /* fallthrough, just stop! */ - default: - /* internal error */ - state(conn, POP3_STOP); - break; - } - } while(!result && pop3c->state != POP3_STOP && Curl_pp_moredata(pp)); - - return result; -} - -/* Called repeatedly until done from multi.c */ -static CURLcode pop3_multi_statemach(struct connectdata *conn, bool *done) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - - if((conn->handler->flags & PROTOPT_SSL) && !pop3c->ssldone) { - result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &pop3c->ssldone); - if(result || !pop3c->ssldone) - return result; - } - - result = Curl_pp_statemach(&pop3c->pp, FALSE); - *done = (pop3c->state == POP3_STOP) ? TRUE : FALSE; - - return result; -} - -static CURLcode pop3_block_statemach(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - - while(pop3c->state != POP3_STOP && !result) - result = Curl_pp_statemach(&pop3c->pp, TRUE); - - return result; -} - -/* Allocate and initialize the POP3 struct for the current SessionHandle if - required */ -static CURLcode pop3_init(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct POP3 *pop3; - - pop3 = data->req.protop = calloc(sizeof(struct POP3), 1); - if(!pop3) - result = CURLE_OUT_OF_MEMORY; - - return result; -} - -/* For the POP3 "protocol connect" and "doing" phases only */ -static int pop3_getsock(struct connectdata *conn, curl_socket_t *socks, - int numsocks) -{ - return Curl_pp_getsock(&conn->proto.pop3c.pp, socks, numsocks); -} - -/*********************************************************************** - * - * pop3_connect() - * - * This function should do everything that is to be considered a part of the - * connection phase. - * - * The variable 'done' points to will be TRUE if the protocol-layer connect - * phase is done when this function returns, or FALSE if not. - */ -static CURLcode pop3_connect(struct connectdata *conn, bool *done) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - struct pingpong *pp = &pop3c->pp; - - *done = FALSE; /* default to not done yet */ - - /* We always support persistent connections in POP3 */ - connkeep(conn, "POP3 default"); - - /* Set the default response time-out */ - pp->response_time = RESP_TIMEOUT; - pp->statemach_act = pop3_statemach_act; - pp->endofresp = pop3_endofresp; - pp->conn = conn; - - /* Set the default preferred authentication type and mechanism */ - pop3c->preftype = POP3_TYPE_ANY; - pop3c->prefmech = SASL_AUTH_ANY; - - /* Initialise the pingpong layer */ - Curl_pp_init(pp); - - /* Parse the URL options */ - result = pop3_parse_url_options(conn); - if(result) - return result; - - /* Start off waiting for the server greeting response */ - state(conn, POP3_SERVERGREET); - - result = pop3_multi_statemach(conn, done); - - return result; -} - -/*********************************************************************** - * - * pop3_done() - * - * The DONE function. This does what needs to be done after a single DO has - * performed. - * - * Input argument is already checked for validity. - */ -static CURLcode pop3_done(struct connectdata *conn, CURLcode status, - bool premature) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct POP3 *pop3 = data->req.protop; - - (void)premature; - - if(!pop3) - /* When the easy handle is removed from the multi interface while libcurl - is still trying to resolve the host name, the POP3 struct is not yet - initialized. However, the removal action calls Curl_done() which in - turn calls this function, so we simply return success. */ - return CURLE_OK; - - if(status) { - connclose(conn, "POP3 done with bad status"); - result = status; /* use the already set error code */ - } - - /* Cleanup our per-request based variables */ - Curl_safefree(pop3->id); - Curl_safefree(pop3->custom); - - /* Clear the transfer mode for the next request */ - pop3->transfer = FTPTRANSFER_BODY; - - return result; -} - -/*********************************************************************** - * - * pop3_perform() - * - * This is the actual DO function for POP3. Get a message/listing according to - * the options previously setup. - */ -static CURLcode pop3_perform(struct connectdata *conn, bool *connected, - bool *dophase_done) -{ - /* This is POP3 and no proxy */ - CURLcode result = CURLE_OK; - struct POP3 *pop3 = conn->data->req.protop; - - DEBUGF(infof(conn->data, "DO phase starts\n")); - - if(conn->data->set.opt_no_body) { - /* Requested no body means no transfer */ - pop3->transfer = FTPTRANSFER_INFO; - } - - *dophase_done = FALSE; /* not done yet */ - - /* Start the first command in the DO phase */ - result = pop3_perform_command(conn); - if(result) - return result; - - /* Run the state-machine */ - result = pop3_multi_statemach(conn, dophase_done); - - *connected = conn->bits.tcpconnect[FIRSTSOCKET]; - - if(*dophase_done) - DEBUGF(infof(conn->data, "DO phase is complete\n")); - - return result; -} - -/*********************************************************************** - * - * pop3_do() - * - * This function is registered as 'curl_do' function. It decodes the path - * parts etc as a wrapper to the actual DO function (pop3_perform). - * - * The input argument is already checked for validity. - */ -static CURLcode pop3_do(struct connectdata *conn, bool *done) -{ - CURLcode result = CURLE_OK; - - *done = FALSE; /* default to false */ - - /* Parse the URL path */ - result = pop3_parse_url_path(conn); - if(result) - return result; - - /* Parse the custom request */ - result = pop3_parse_custom_request(conn); - if(result) - return result; - - result = pop3_regular_transfer(conn, done); - - return result; -} - -/*********************************************************************** - * - * pop3_disconnect() - * - * Disconnect from an POP3 server. Cleanup protocol-specific per-connection - * resources. BLOCKING. - */ -static CURLcode pop3_disconnect(struct connectdata *conn, bool dead_connection) -{ - struct pop3_conn *pop3c = &conn->proto.pop3c; - - /* We cannot send quit unconditionally. If this connection is stale or - bad in any way, sending quit and waiting around here will make the - disconnect wait in vain and cause more problems than we need to. */ - - /* The POP3 session may or may not have been allocated/setup at this - point! */ - if(!dead_connection && pop3c->pp.conn && pop3c->pp.conn->bits.protoconnstart) - if(!pop3_perform_quit(conn)) - (void)pop3_block_statemach(conn); /* ignore errors on QUIT */ - - /* Disconnect from the server */ - Curl_pp_disconnect(&pop3c->pp); - - /* Cleanup the SASL module */ - Curl_sasl_cleanup(conn, pop3c->authused); - - /* Cleanup our connection based variables */ - Curl_safefree(pop3c->apoptimestamp); - - return CURLE_OK; -} - -/* Call this when the DO phase has completed */ -static CURLcode pop3_dophase_done(struct connectdata *conn, bool connected) -{ - (void)conn; - (void)connected; - - return CURLE_OK; -} - -/* Called from multi.c while DOing */ -static CURLcode pop3_doing(struct connectdata *conn, bool *dophase_done) -{ - CURLcode result = pop3_multi_statemach(conn, dophase_done); - - if(result) - DEBUGF(infof(conn->data, "DO phase failed\n")); - else if(*dophase_done) { - result = pop3_dophase_done(conn, FALSE /* not connected */); - - DEBUGF(infof(conn->data, "DO phase is complete\n")); - } - - return result; -} - -/*********************************************************************** - * - * pop3_regular_transfer() - * - * The input argument is already checked for validity. - * - * Performs all commands done before a regular transfer between a local and a - * remote host. - */ -static CURLcode pop3_regular_transfer(struct connectdata *conn, - bool *dophase_done) -{ - CURLcode result = CURLE_OK; - bool connected = FALSE; - struct SessionHandle *data = conn->data; - - /* Make sure size is unknown at this point */ - data->req.size = -1; - - /* Set the progress data */ - Curl_pgrsSetUploadCounter(data, 0); - Curl_pgrsSetDownloadCounter(data, 0); - Curl_pgrsSetUploadSize(data, -1); - Curl_pgrsSetDownloadSize(data, -1); - - /* Carry out the perform */ - result = pop3_perform(conn, &connected, dophase_done); - - /* Perform post DO phase operations if necessary */ - if(!result && *dophase_done) - result = pop3_dophase_done(conn, connected); - - return result; -} - -static CURLcode pop3_setup_connection(struct connectdata *conn) -{ - struct SessionHandle *data = conn->data; - - /* Initialise the POP3 layer */ - CURLcode result = pop3_init(conn); - if(result) - return result; - - if(conn->bits.httpproxy && !data->set.tunnel_thru_httpproxy) { - /* Unless we have asked to tunnel POP3 operations through the proxy, we - switch and use HTTP operations only */ -#ifndef CURL_DISABLE_HTTP - if(conn->handler == &Curl_handler_pop3) - conn->handler = &Curl_handler_pop3_proxy; - else { -#ifdef USE_SSL - conn->handler = &Curl_handler_pop3s_proxy; -#else - failf(data, "POP3S not supported!"); - return CURLE_UNSUPPORTED_PROTOCOL; -#endif - } - - /* set it up as an HTTP connection instead */ - return conn->handler->setup_connection(conn); -#else - failf(data, "POP3 over http proxy requires HTTP support built-in!"); - return CURLE_UNSUPPORTED_PROTOCOL; -#endif - } - - data->state.path++; /* don't include the initial slash */ - - return CURLE_OK; -} - -/*********************************************************************** - * - * pop3_parse_url_options() - * - * Parse the URL login options. - */ -static CURLcode pop3_parse_url_options(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct pop3_conn *pop3c = &conn->proto.pop3c; - const char *options = conn->options; - const char *ptr = options; - bool reset = TRUE; - - while(ptr && *ptr) { - const char *key = ptr; - - while(*ptr && *ptr != '=') - ptr++; - - if(strnequal(key, "AUTH", 4)) { - size_t len = 0; - const char *value = ++ptr; - - if(reset) { - reset = FALSE; - pop3c->preftype = POP3_TYPE_NONE; - pop3c->prefmech = SASL_AUTH_NONE; - } - - while(*ptr && *ptr != ';') { - ptr++; - len++; - } - - if(strnequal(value, "*", len)) { - pop3c->preftype = POP3_TYPE_ANY; - pop3c->prefmech = SASL_AUTH_ANY; - } - else if(strnequal(value, "+APOP", len)) { - pop3c->preftype = POP3_TYPE_APOP; - pop3c->prefmech = SASL_AUTH_NONE; - } - else if(strnequal(value, SASL_MECH_STRING_LOGIN, len)) { - pop3c->preftype = POP3_TYPE_SASL; - pop3c->prefmech |= SASL_MECH_LOGIN; - } - else if(strnequal(value, SASL_MECH_STRING_PLAIN, len)) { - pop3c->preftype = POP3_TYPE_SASL; - pop3c->prefmech |= SASL_MECH_PLAIN; - } - else if(strnequal(value, SASL_MECH_STRING_CRAM_MD5, len)) { - pop3c->preftype = POP3_TYPE_SASL; - pop3c->prefmech |= SASL_MECH_CRAM_MD5; - } - else if(strnequal(value, SASL_MECH_STRING_DIGEST_MD5, len)) { - pop3c->preftype = POP3_TYPE_SASL; - pop3c->prefmech |= SASL_MECH_DIGEST_MD5; - } - else if(strnequal(value, SASL_MECH_STRING_GSSAPI, len)) { - pop3c->preftype = POP3_TYPE_SASL; - pop3c->prefmech |= SASL_MECH_GSSAPI; - } - else if(strnequal(value, SASL_MECH_STRING_NTLM, len)) { - pop3c->preftype = POP3_TYPE_SASL; - pop3c->prefmech |= SASL_MECH_NTLM; - } - else if(strnequal(value, SASL_MECH_STRING_XOAUTH2, len)) { - pop3c->preftype = POP3_TYPE_SASL; - pop3c->prefmech |= SASL_MECH_XOAUTH2; - } - - if(*ptr == ';') - ptr++; - } - else - result = CURLE_URL_MALFORMAT; - } - - return result; -} - -/*********************************************************************** - * - * pop3_parse_url_path() - * - * Parse the URL path into separate path components. - */ -static CURLcode pop3_parse_url_path(struct connectdata *conn) -{ - /* The POP3 struct is already initialised in pop3_connect() */ - struct SessionHandle *data = conn->data; - struct POP3 *pop3 = data->req.protop; - const char *path = data->state.path; - - /* URL decode the path for the message ID */ - return Curl_urldecode(data, path, 0, &pop3->id, NULL, TRUE); -} - -/*********************************************************************** - * - * pop3_parse_custom_request() - * - * Parse the custom request. - */ -static CURLcode pop3_parse_custom_request(struct connectdata *conn) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct POP3 *pop3 = data->req.protop; - const char *custom = data->set.str[STRING_CUSTOMREQUEST]; - - /* URL decode the custom request */ - if(custom) - result = Curl_urldecode(data, custom, 0, &pop3->custom, NULL, TRUE); - - return result; -} - -/*********************************************************************** - * - * pop3_calc_sasl_details() - * - * Calculate the required login details for SASL authentication. - */ -static CURLcode pop3_calc_sasl_details(struct connectdata *conn, - const char **mech, - char **initresp, size_t *len, - pop3state *state1, pop3state *state2) -{ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct pop3_conn *pop3c = &conn->proto.pop3c; - - /* Calculate the supported authentication mechanism, by decreasing order of - security, as well as the initial response where appropriate */ -#if defined(USE_WINDOWS_SSPI) - if((pop3c->authmechs & SASL_MECH_GSSAPI) && - (pop3c->prefmech & SASL_MECH_GSSAPI)) { - pop3c->mutual_auth = FALSE; /* TODO: Calculate mutual authentication */ - - *mech = SASL_MECH_STRING_GSSAPI; - *state1 = POP3_AUTH_GSSAPI; - *state2 = POP3_AUTH_GSSAPI_TOKEN; - pop3c->authused = SASL_MECH_GSSAPI; - - if(data->set.sasl_ir) - result = Curl_sasl_create_gssapi_user_message(data, conn->user, - conn->passwd, "pop", - pop3c->mutual_auth, - NULL, &conn->krb5, - initresp, len); - } - else -#endif -#ifndef CURL_DISABLE_CRYPTO_AUTH - if((pop3c->authmechs & SASL_MECH_DIGEST_MD5) && - (pop3c->prefmech & SASL_MECH_DIGEST_MD5)) { - *mech = SASL_MECH_STRING_DIGEST_MD5; - *state1 = POP3_AUTH_DIGESTMD5; - pop3c->authused = SASL_MECH_DIGEST_MD5; - } - else if((pop3c->authmechs & SASL_MECH_CRAM_MD5) && - (pop3c->prefmech & SASL_MECH_CRAM_MD5)) { - *mech = SASL_MECH_STRING_CRAM_MD5; - *state1 = POP3_AUTH_CRAMMD5; - pop3c->authused = SASL_MECH_CRAM_MD5; - } - else -#endif -#ifdef USE_NTLM - if((pop3c->authmechs & SASL_MECH_NTLM) && - (pop3c->prefmech & SASL_MECH_NTLM)) { - *mech = SASL_MECH_STRING_NTLM; - *state1 = POP3_AUTH_NTLM; - *state2 = POP3_AUTH_NTLM_TYPE2MSG; - pop3c->authused = SASL_MECH_NTLM; - - if(data->set.sasl_ir) - result = Curl_sasl_create_ntlm_type1_message(conn->user, conn->passwd, - &conn->ntlm, - initresp, len); - } - else -#endif - if(((pop3c->authmechs & SASL_MECH_XOAUTH2) && - (pop3c->prefmech & SASL_MECH_XOAUTH2) && - (pop3c->prefmech != SASL_AUTH_ANY)) || conn->xoauth2_bearer) { - *mech = SASL_MECH_STRING_XOAUTH2; - *state1 = POP3_AUTH_XOAUTH2; - *state2 = POP3_AUTH_FINAL; - pop3c->authused = SASL_MECH_XOAUTH2; - - if(data->set.sasl_ir) - result = Curl_sasl_create_xoauth2_message(data, conn->user, - conn->xoauth2_bearer, - initresp, len); - } - else if((pop3c->authmechs & SASL_MECH_LOGIN) && - (pop3c->prefmech & SASL_MECH_LOGIN)) { - *mech = SASL_MECH_STRING_LOGIN; - *state1 = POP3_AUTH_LOGIN; - *state2 = POP3_AUTH_LOGIN_PASSWD; - pop3c->authused = SASL_MECH_LOGIN; - - if(data->set.sasl_ir) - result = Curl_sasl_create_login_message(data, conn->user, initresp, len); - } - else if((pop3c->authmechs & SASL_MECH_PLAIN) && - (pop3c->prefmech & SASL_MECH_PLAIN)) { - *mech = SASL_MECH_STRING_PLAIN; - *state1 = POP3_AUTH_PLAIN; - *state2 = POP3_AUTH_FINAL; - pop3c->authused = SASL_MECH_PLAIN; - - if(data->set.sasl_ir) - result = Curl_sasl_create_plain_message(data, conn->user, conn->passwd, - initresp, len); - } - - return result; -} - -/*********************************************************************** - * - * Curl_pop3_write() - * - * This function scans the body after the end-of-body and writes everything - * until the end is found. - */ -CURLcode Curl_pop3_write(struct connectdata *conn, char *str, size_t nread) -{ - /* This code could be made into a special function in the handler struct */ - CURLcode result = CURLE_OK; - struct SessionHandle *data = conn->data; - struct SingleRequest *k = &data->req; - - struct pop3_conn *pop3c = &conn->proto.pop3c; - bool strip_dot = FALSE; - size_t last = 0; - size_t i; - - /* Search through the buffer looking for the end-of-body marker which is - 5 bytes (0d 0a 2e 0d 0a). Note that a line starting with a dot matches - the eob so the server will have prefixed it with an extra dot which we - need to strip out. Additionally the marker could of course be spread out - over 5 different data chunks. */ - for(i = 0; i < nread; i++) { - size_t prev = pop3c->eob; - - switch(str[i]) { - case 0x0d: - if(pop3c->eob == 0) { - pop3c->eob++; - - if(i) { - /* Write out the body part that didn't match */ - result = Curl_client_write(conn, CLIENTWRITE_BODY, &str[last], - i - last); - - if(result) - return result; - - last = i; - } - } - else if(pop3c->eob == 3) - pop3c->eob++; - else - /* If the character match wasn't at position 0 or 3 then restart the - pattern matching */ - pop3c->eob = 1; - break; - - case 0x0a: - if(pop3c->eob == 1 || pop3c->eob == 4) - pop3c->eob++; - else - /* If the character match wasn't at position 1 or 4 then start the - search again */ - pop3c->eob = 0; - break; - - case 0x2e: - if(pop3c->eob == 2) - pop3c->eob++; - else if(pop3c->eob == 3) { - /* We have an extra dot after the CRLF which we need to strip off */ - strip_dot = TRUE; - pop3c->eob = 0; - } - else - /* If the character match wasn't at position 2 then start the search - again */ - pop3c->eob = 0; - break; - - default: - pop3c->eob = 0; - break; - } - - /* Did we have a partial match which has subsequently failed? */ - if(prev && prev >= pop3c->eob) { - /* Strip can only be non-zero for the very first mismatch after CRLF - and then both prev and strip are equal and nothing will be output - below */ - while(prev && pop3c->strip) { - prev--; - pop3c->strip--; - } - - if(prev) { - /* If the partial match was the CRLF and dot then only write the CRLF - as the server would have inserted the dot */ - result = Curl_client_write(conn, CLIENTWRITE_BODY, (char*)POP3_EOB, - strip_dot ? prev - 1 : prev); - - if(result) - return result; - - last = i; - strip_dot = FALSE; - } - } - } - - if(pop3c->eob == POP3_EOB_LEN) { - /* We have a full match so the transfer is done, however we must transfer - the CRLF at the start of the EOB as this is considered to be part of the - message as per RFC-1939, sect. 3 */ - result = Curl_client_write(conn, CLIENTWRITE_BODY, (char *)POP3_EOB, 2); - - k->keepon &= ~KEEP_RECV; - pop3c->eob = 0; - - return result; - } - - if(pop3c->eob) - /* While EOB is matching nothing should be output */ - return CURLE_OK; - - if(nread - last) { - result = Curl_client_write(conn, CLIENTWRITE_BODY, &str[last], - nread - last); - } - - return result; -} - -#endif /* CURL_DISABLE_POP3 */ -- cgit 1.2.3-korg