From 208d43c7988c527691b663e4e00b56b42cc19277 Mon Sep 17 00:00:00 2001 From: "Angelo Mantellini (manangel)" Date: Tue, 25 Apr 2017 21:17:37 +0200 Subject: correction link libraries libcurl Change-Id: I8be291ac6b9ec15f0f7bbaa8b434da9d319ae389 Signed-off-by: Angelo Mantellini (manangel) --- .../jni/libcurl/src/tool_getparam.c | 1889 ++++++++++++++++++++ 1 file changed, 1889 insertions(+) create mode 100755 external/libcurl_android/jni/libcurl/src/tool_getparam.c (limited to 'external/libcurl_android/jni/libcurl/src/tool_getparam.c') diff --git a/external/libcurl_android/jni/libcurl/src/tool_getparam.c b/external/libcurl_android/jni/libcurl/src/tool_getparam.c new file mode 100755 index 00000000..180878ba --- /dev/null +++ b/external/libcurl_android/jni/libcurl/src/tool_getparam.c @@ -0,0 +1,1889 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2014, Daniel Stenberg, , et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ +#include "tool_setup.h" + +#include "rawstr.h" + +#define ENABLE_CURLX_PRINTF +/* use our own printf() functions */ +#include "curlx.h" + +#include "tool_binmode.h" +#include "tool_cfgable.h" +#include "tool_cb_prg.h" +#include "tool_formparse.h" +#include "tool_getparam.h" +#include "tool_helpers.h" +#include "tool_libinfo.h" +#include "tool_metalink.h" +#include "tool_msgs.h" +#include "tool_paramhlp.h" +#include "tool_parsecfg.h" + +#include "memdebug.h" /* keep this as LAST include */ + +#ifdef MSDOS +# define USE_WATT32 +#endif + +#define GetStr(str,val) do { \ + if(*(str)) { \ + free(*(str)); \ + *(str) = NULL; \ + } \ + if((val)) { \ + *(str) = strdup((val)); \ + if(!(*(str))) \ + return PARAM_NO_MEM; \ + } \ +} WHILE_FALSE + +struct LongShort { + const char *letter; /* short name option */ + const char *lname; /* long name option */ + bool extraparam; /* whether it takes an additional argument */ +}; + +static const struct LongShort aliases[]= { + /* all these ones, starting with "*" or "$" as a short-option have *no* + short option to mention. */ + {"*", "url", TRUE}, + {"*4", "dns-ipv4-addr", TRUE}, + {"*6", "dns-ipv6-addr", TRUE}, + {"*a", "random-file", TRUE}, + {"*b", "egd-file", TRUE}, + {"*B", "oauth2-bearer", TRUE}, + {"*c", "connect-timeout", TRUE}, + {"*d", "ciphers", TRUE}, + {"*D", "dns-interface", TRUE}, + {"*e", "disable-epsv", FALSE}, + {"*E", "epsv", FALSE}, + /* 'epsv' made like this to make --no-epsv and --epsv to work + although --disable-epsv is the documented option */ +#ifdef USE_ENVIRONMENT + {"*f", "environment", FALSE}, +#endif + {"*F", "dns-servers", TRUE}, + {"*g", "trace", TRUE}, + {"*G", "npn", FALSE}, + {"*h", "trace-ascii", TRUE}, + {"*H", "alpn", FALSE}, + {"*i", "limit-rate", TRUE}, + {"*j", "compressed", FALSE}, + {"*J", "tr-encoding", FALSE}, + {"*k", "digest", FALSE}, + {"*l", "negotiate", FALSE}, + {"*m", "ntlm", FALSE}, + {"*M", "ntlm-wb", FALSE}, + {"*n", "basic", FALSE}, + {"*o", "anyauth", FALSE}, +#ifdef USE_WATT32 + {"*p", "wdebug", FALSE}, +#endif + {"*q", "ftp-create-dirs", FALSE}, + {"*r", "create-dirs", FALSE}, + {"*s", "max-redirs", TRUE}, + {"*t", "proxy-ntlm", FALSE}, + {"*u", "crlf", FALSE}, + {"*v", "stderr", TRUE}, + {"*w", "interface", TRUE}, + {"*x", "krb" , TRUE}, + {"*x", "krb4" , TRUE}, + /* 'krb4' is the previous name */ + {"*y", "max-filesize", TRUE}, + {"*z", "disable-eprt", FALSE}, + {"*Z", "eprt", FALSE}, + /* 'eprt' made like this to make --no-eprt and --eprt to work + although --disable-eprt is the documented option */ + {"$a", "ftp-ssl", FALSE}, + /* 'ftp-ssl' deprecated name since 7.20.0 */ + {"$a", "ssl", FALSE}, + /* 'ssl' new option name in 7.20.0, previously this was ftp-ssl */ + {"$b", "ftp-pasv", FALSE}, + {"$c", "socks5", TRUE}, + {"$c", "socks", TRUE}, + /* 'socks' is how the option once was documented but we prefer + the --socks5 version for explicit version */ + {"$d", "tcp-nodelay", FALSE}, + {"$e", "proxy-digest", FALSE}, + {"$f", "proxy-basic", FALSE}, + {"$g", "retry", TRUE}, + {"$h", "retry-delay", TRUE}, + {"$i", "retry-max-time", TRUE}, + {"$k", "proxy-negotiate", FALSE}, + {"$m", "ftp-account", TRUE}, + {"$n", "proxy-anyauth", FALSE}, + {"$o", "trace-time", FALSE}, + {"$p", "ignore-content-length", FALSE}, + {"$q", "ftp-skip-pasv-ip", FALSE}, + {"$r", "ftp-method", TRUE}, + {"$s", "local-port", TRUE}, + {"$t", "socks4", TRUE}, + {"$T", "socks4a", TRUE}, + {"$u", "ftp-alternative-to-user", TRUE}, + {"$v", "ftp-ssl-reqd", FALSE}, + /* 'ftp-ssl-reqd' deprecated name since 7.20.0 */ + {"$v", "ssl-reqd", FALSE}, + /* 'ssl-reqd' new in 7.20.0, previously this was ftp-ssl-reqd */ + {"$w", "sessionid", FALSE}, + /* ¡sessionid' listed as --no-sessionid in the help */ + {"$x", "ftp-ssl-control", FALSE}, + {"$y", "ftp-ssl-ccc", FALSE}, + {"$j", "ftp-ssl-ccc-mode", TRUE}, + {"$z", "libcurl", TRUE}, + {"$#", "raw", FALSE}, + {"$0", "post301", FALSE}, + {"$1", "keepalive", FALSE}, + /* 'keepalive' listed as --no-keepalive in the help */ + {"$2", "socks5-hostname", TRUE}, + {"$3", "keepalive-time", TRUE}, + {"$4", "post302", FALSE}, + {"$5", "noproxy", TRUE}, +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + {"$6", "socks5-gssapi-service", TRUE}, + {"$7", "socks5-gssapi-nec", FALSE}, +#endif + {"$8", "proxy1.0", TRUE}, + {"$9", "tftp-blksize", TRUE}, + {"$A", "mail-from", TRUE}, + {"$B", "mail-rcpt", TRUE}, + {"$C", "ftp-pret", FALSE}, + {"$D", "proto", TRUE}, + {"$E", "proto-redir", TRUE}, + {"$F", "resolve", TRUE}, + {"$G", "delegation", TRUE}, + {"$H", "mail-auth", TRUE}, + {"$I", "post303", FALSE}, + {"$J", "metalink", FALSE}, + {"$K", "sasl-ir", FALSE}, + {"$L", "test-event", FALSE}, + {"0", "http1.0", FALSE}, + {"01", "http1.1", FALSE}, + {"02", "http2", FALSE}, + {"1", "tlsv1", FALSE}, + {"10", "tlsv1.0", FALSE}, + {"11", "tlsv1.1", FALSE}, + {"12", "tlsv1.2", FALSE}, + {"2", "sslv2", FALSE}, + {"3", "sslv3", FALSE}, + {"4", "ipv4", FALSE}, + {"6", "ipv6", FALSE}, + {"a", "append", FALSE}, + {"A", "user-agent", TRUE}, + {"b", "cookie", TRUE}, + {"B", "use-ascii", FALSE}, + {"c", "cookie-jar", TRUE}, + {"C", "continue-at", TRUE}, + {"d", "data", TRUE}, + {"da", "data-ascii", TRUE}, + {"db", "data-binary", TRUE}, + {"de", "data-urlencode", TRUE}, + {"D", "dump-header", TRUE}, + {"e", "referer", TRUE}, + {"E", "cert", TRUE}, + {"Ea", "cacert", TRUE}, + {"Eb", "cert-type", TRUE}, + {"Ec", "key", TRUE}, + {"Ed", "key-type", TRUE}, + {"Ee", "pass", TRUE}, + {"Ef", "engine", TRUE}, + {"Eg", "capath ", TRUE}, + {"Eh", "pubkey", TRUE}, + {"Ei", "hostpubmd5", TRUE}, + {"Ej", "crlfile", TRUE}, + {"Ek", "tlsuser", TRUE}, + {"El", "tlspassword", TRUE}, + {"Em", "tlsauthtype", TRUE}, + {"En", "ssl-allow-beast", FALSE}, + {"Eo", "login-options", TRUE}, + {"f", "fail", FALSE}, + {"F", "form", TRUE}, + {"Fs", "form-string", TRUE}, + {"g", "globoff", FALSE}, + {"G", "get", FALSE}, + {"h", "help", FALSE}, + {"H", "header", TRUE}, + {"Hp", "proxy-header", TRUE}, + {"i", "include", FALSE}, + {"I", "head", FALSE}, + {"j", "junk-session-cookies", FALSE}, + {"J", "remote-header-name", FALSE}, + {"k", "insecure", FALSE}, + {"K", "config", TRUE}, + {"l", "list-only", FALSE}, + {"L", "location", FALSE}, + {"Lt", "location-trusted", FALSE}, + {"m", "max-time", TRUE}, + {"M", "manual", FALSE}, + {"n", "netrc", FALSE}, + {"no", "netrc-optional", FALSE}, + {"ne", "netrc-file", TRUE}, + {"N", "buffer", FALSE}, + /* 'buffer' listed as --no-buffer in the help */ + {"o", "output", TRUE}, + {"O", "remote-name", FALSE}, + {"Oa", "remote-name-all", FALSE}, + {"p", "proxytunnel", FALSE}, + {"P", "ftpport", TRUE}, + /* 'ftpport' old version */ + {"P", "ftp-port", TRUE}, + {"q", "disable", FALSE}, + {"Q", "quote", TRUE}, + {"r", "range", TRUE}, + {"R", "remote-time", FALSE}, + {"s", "silent", FALSE}, + {"S", "show-error", FALSE}, + {"t", "telnet-options", TRUE}, + /* 'telnet-options' documented as telnet-option */ + {"T", "upload-file", TRUE}, + {"u", "user", TRUE}, + {"U", "proxy-user", TRUE}, + {"v", "verbose", FALSE}, + {"V", "version", FALSE}, + {"w", "write-out", TRUE}, + {"x", "proxy", TRUE}, + {"X", "request", TRUE}, + {"X", "http-request", TRUE}, + /* 'http-request' OBSOLETE VERSION */ + {"Y", "speed-limit", TRUE}, + {"y", "speed-time", TRUE}, + {"z", "time-cond", TRUE}, + {"#", "progress-bar", FALSE}, + {":", "next", FALSE}, + {"~", "xattr", FALSE}, +}; + +/* Split the argument of -E to 'certname' and 'passphrase' separated by colon. + * We allow ':' and '\' to be escaped by '\' so that we can use certificate + * nicknames containing ':'. See + * for details. */ +#ifndef UNITTESTS +static +#endif +void parse_cert_parameter(const char *cert_parameter, + char **certname, + char **passphrase) +{ + size_t param_length = strlen(cert_parameter); + size_t span; + const char *param_place = NULL; + char *certname_place = NULL; + *certname = NULL; + *passphrase = NULL; + + /* most trivial assumption: cert_parameter is empty */ + if(param_length == 0) + return; + + /* next less trivial: cert_parameter contains no colon nor backslash; this + * means no passphrase was given and no characters escaped */ + if(!strpbrk(cert_parameter, ":\\")) { + *certname = strdup(cert_parameter); + return; + } + /* deal with escaped chars; find unescaped colon if it exists */ + certname_place = malloc(param_length + 1); + if(!certname_place) + return; + + *certname = certname_place; + param_place = cert_parameter; + while(*param_place) { + span = strcspn(param_place, ":\\"); + strncpy(certname_place, param_place, span); + param_place += span; + certname_place += span; + /* we just ate all the non-special chars. now we're on either a special + * char or the end of the string. */ + switch(*param_place) { + case '\0': + break; + case '\\': + param_place++; + switch(*param_place) { + case '\0': + *certname_place++ = '\\'; + break; + case '\\': + *certname_place++ = '\\'; + param_place++; + break; + case ':': + *certname_place++ = ':'; + param_place++; + break; + default: + *certname_place++ = '\\'; + *certname_place++ = *param_place; + param_place++; + break; + } + break; + case ':': + /* Since we live in a world of weirdness and confusion, the win32 + dudes can use : when using drive letters and thus c:\file:password + needs to work. In order not to break compatibility, we still use : as + separator, but we try to detect when it is used for a file name! On + windows. */ +#ifdef WIN32 + if(param_place && + (param_place == &cert_parameter[1]) && + (cert_parameter[2] == '\\' || cert_parameter[2] == '/') && + (ISALPHA(cert_parameter[0])) ) { + /* colon in the second column, followed by a backslash, and the + first character is an alphabetic letter: + + this is a drive letter colon */ + *certname_place++ = ':'; + param_place++; + break; + } +#endif + /* escaped colons and Windows drive letter colons were handled + * above; if we're still here, this is a separating colon */ + param_place++; + if(strlen(param_place) > 0) { + *passphrase = strdup(param_place); + } + goto done; + } + } +done: + *certname_place = '\0'; +} + +ParameterError getparameter(char *flag, /* f or -long-flag */ + char *nextarg, /* NULL if unset */ + bool *usedarg, /* set to TRUE if the arg + has been used */ + struct GlobalConfig *global, + struct OperationConfig *config) +{ + char letter; + char subletter = '\0'; /* subletters can only occur on long options */ + int rc; + const char *parse = NULL; + unsigned int j; + time_t now; + int hit = -1; + bool longopt = FALSE; + bool singleopt = FALSE; /* when true means '-o foo' used '-ofoo' */ + ParameterError err; + bool toggle = TRUE; /* how to switch boolean options, on or off. Controlled + by using --OPTION or --no-OPTION */ + + + if(('-' != flag[0]) || + (('-' == flag[0]) && ('-' == flag[1]))) { + /* this should be a long name */ + char *word = ('-' == flag[0]) ? flag+2 : flag; + size_t fnam = strlen(word); + int numhits = 0; + + if(!strncmp(word, "no-", 3)) { + /* disable this option but ignore the "no-" part when looking for it */ + word += 3; + toggle = FALSE; + } + + for(j = 0; j < sizeof(aliases)/sizeof(aliases[0]); j++) { + if(curlx_strnequal(aliases[j].lname, word, fnam)) { + longopt = TRUE; + numhits++; + if(curlx_raw_equal(aliases[j].lname, word)) { + parse = aliases[j].letter; + hit = j; + numhits = 1; /* a single unique hit */ + break; + } + parse = aliases[j].letter; + hit = j; + } + } + if(numhits > 1) { + /* this is at least the second match! */ + return PARAM_OPTION_AMBIGUOUS; + } + if(hit < 0) { + return PARAM_OPTION_UNKNOWN; + } + } + else { + flag++; /* prefixed with one dash, pass it */ + hit = -1; + parse = flag; + } + + do { + /* we can loop here if we have multiple single-letters */ + + if(!longopt) { + if(NULL != parse) { + letter = (char)*parse; + } + else { + letter = '\0'; + } + subletter='\0'; + } + else { + letter = parse[0]; + subletter = parse[1]; + } + *usedarg = FALSE; /* default is that we don't use the arg */ + + if(hit < 0) { + for(j = 0; j < sizeof(aliases)/sizeof(aliases[0]); j++) { + if(letter == aliases[j].letter[0]) { + hit = j; + break; + } + } + if(hit < 0) { + return PARAM_OPTION_UNKNOWN; + } + } + + if(aliases[hit].extraparam) { + /* this option requires an extra parameter */ + if(!longopt && parse[1]) { + nextarg = (char *)&parse[1]; /* this is the actual extra parameter */ + singleopt = TRUE; /* don't loop anymore after this */ + } + else if(!nextarg) + return PARAM_REQUIRES_PARAMETER; + else + *usedarg = TRUE; /* mark it as used */ + } + + switch(letter) { + case '*': /* options without a short option */ + switch(subletter) { + case '4': /* --dns-ipv4-addr */ + /* addr in dot notation */ + GetStr(&config->dns_ipv4_addr, nextarg); + break; + case '6': /* --dns-ipv6-addr */ + /* addr in dot notation */ + GetStr(&config->dns_ipv6_addr, nextarg); + break; + case 'a': /* random-file */ + GetStr(&config->random_file, nextarg); + break; + case 'b': /* egd-file */ + GetStr(&config->egd_file, nextarg); + break; + case 'B': /* XOAUTH2 Bearer */ + GetStr(&config->xoauth2_bearer, nextarg); + break; + case 'c': /* connect-timeout */ + err = str2udouble(&config->connecttimeout, nextarg); + if(err) + return err; + break; + case 'd': /* ciphers */ + GetStr(&config->cipher_list, nextarg); + break; + case 'D': /* --dns-interface */ + /* interface name */ + GetStr(&config->dns_interface, nextarg); + break; + case 'e': /* --disable-epsv */ + config->disable_epsv = toggle; + break; + case 'E': /* --epsv */ + config->disable_epsv = (!toggle)?TRUE:FALSE; + break; +#ifdef USE_ENVIRONMENT + case 'f': + config->writeenv = toggle; + break; +#endif + case 'F': /* --dns-servers */ + /* IP addrs of DNS servers */ + GetStr(&config->dns_servers, nextarg); + break; + case 'g': /* --trace */ + GetStr(&global->trace_dump, nextarg); + if(global->tracetype && (global->tracetype != TRACE_BIN)) + warnf(config, "--trace overrides an earlier trace/verbose option\n"); + global->tracetype = TRACE_BIN; + break; + case 'G': /* --npn */ + config->nonpn = (!toggle)?TRUE:FALSE; + break; + case 'h': /* --trace-ascii */ + GetStr(&global->trace_dump, nextarg); + if(global->tracetype && (global->tracetype != TRACE_ASCII)) + warnf(config, + "--trace-ascii overrides an earlier trace/verbose option\n"); + global->tracetype = TRACE_ASCII; + break; + case 'H': /* --alpn */ + config->noalpn = (!toggle)?TRUE:FALSE; + break; + case 'i': /* --limit-rate */ + { + /* We support G, M, K too */ + char *unit; + curl_off_t value = curlx_strtoofft(nextarg, &unit, 0); + + if(!*unit) + unit = (char *)"b"; + else if(strlen(unit) > 1) + unit = (char *)"w"; /* unsupported */ + + switch(*unit) { + case 'G': + case 'g': + value *= 1024*1024*1024; + break; + case 'M': + case 'm': + value *= 1024*1024; + break; + case 'K': + case 'k': + value *= 1024; + break; + case 'b': + case 'B': + /* for plain bytes, leave as-is */ + break; + default: + warnf(config, "unsupported rate unit. Use G, M, K or B!\n"); + return PARAM_BAD_USE; + } + config->recvpersecond = value; + config->sendpersecond = value; + } + break; + + case 'j': /* --compressed */ + if(toggle && !(curlinfo->features & CURL_VERSION_LIBZ)) + return PARAM_LIBCURL_DOESNT_SUPPORT; + config->encoding = toggle; + break; + + case 'J': /* --tr-encoding */ + config->tr_encoding = toggle; + break; + + case 'k': /* --digest */ + if(toggle) + config->authtype |= CURLAUTH_DIGEST; + else + config->authtype &= ~CURLAUTH_DIGEST; + break; + + case 'l': /* --negotiate */ + if(toggle) { + if(curlinfo->features & CURL_VERSION_SPNEGO) + config->authtype |= CURLAUTH_NEGOTIATE; + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + } + else + config->authtype &= ~CURLAUTH_NEGOTIATE; + break; + + case 'm': /* --ntlm */ + if(toggle) { + if(curlinfo->features & CURL_VERSION_NTLM) + config->authtype |= CURLAUTH_NTLM; + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + } + else + config->authtype &= ~CURLAUTH_NTLM; + break; + + case 'M': /* --ntlm-wb */ + if(toggle) { + if(curlinfo->features & CURL_VERSION_NTLM_WB) + config->authtype |= CURLAUTH_NTLM_WB; + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + } + else + config->authtype &= ~CURLAUTH_NTLM_WB; + break; + + case 'n': /* --basic for completeness */ + if(toggle) + config->authtype |= CURLAUTH_BASIC; + else + config->authtype &= ~CURLAUTH_BASIC; + break; + + case 'o': /* --anyauth, let libcurl pick it */ + if(toggle) + config->authtype = CURLAUTH_ANY; + /* --no-anyauth simply doesn't touch it */ + break; + +#ifdef USE_WATT32 + case 'p': /* --wdebug */ + dbug_init(); + break; +#endif + case 'q': /* --ftp-create-dirs */ + config->ftp_create_dirs = toggle; + break; + + case 'r': /* --create-dirs */ + config->create_dirs = toggle; + break; + + case 's': /* --max-redirs */ + /* specified max no of redirects (http(s)), this accepts -1 as a + special condition */ + err = str2num(&config->maxredirs, nextarg); + if(err) + return err; + if(config->maxredirs < -1) + return PARAM_BAD_NUMERIC; + break; + + case 't': /* --proxy-ntlm */ + if(curlinfo->features & CURL_VERSION_NTLM) + config->proxyntlm = toggle; + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + break; + + case 'u': /* --crlf */ + /* LF -> CRLF conversion? */ + config->crlf = toggle; + break; + + case 'v': /* --stderr */ + if(strcmp(nextarg, "-")) { + FILE *newfile = fopen(nextarg, "wt"); + if(!newfile) + warnf(config, "Failed to open %s!\n", nextarg); + else { + if(global->errors_fopened) + fclose(global->errors); + global->errors = newfile; + global->errors_fopened = TRUE; + } + } + else + global->errors = stdout; + break; + case 'w': /* --interface */ + /* interface */ + GetStr(&config->iface, nextarg); + break; + case 'x': /* --krb */ + /* kerberos level string */ + if(curlinfo->features & CURL_VERSION_KERBEROS4) + GetStr(&config->krblevel, nextarg); + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + break; + case 'y': /* --max-filesize */ + err = str2offset(&config->max_filesize, nextarg); + if(err) + return err; + break; + case 'z': /* --disable-eprt */ + config->disable_eprt = toggle; + break; + case 'Z': /* --eprt */ + config->disable_eprt = (!toggle)?TRUE:FALSE; + break; + + default: /* the URL! */ + { + struct getout *url; + if(config->url_get || ((config->url_get = config->url_list) != NULL)) { + /* there's a node here, if it already is filled-in continue to find + an "empty" node */ + while(config->url_get && (config->url_get->flags & GETOUT_URL)) + config->url_get = config->url_get->next; + } + + /* now there might or might not be an available node to fill in! */ + + if(config->url_get) + /* existing node */ + url = config->url_get; + else + /* there was no free node, create one! */ + url = new_getout(config); + + if(!url) + return PARAM_NO_MEM; + else { + /* fill in the URL */ + GetStr(&url->url, nextarg); + url->flags |= GETOUT_URL; + } + } + } + break; + case '$': /* more options without a short option */ + switch(subletter) { + case 'a': /* --ftp-ssl */ + if(toggle && !(curlinfo->features & CURL_VERSION_SSL)) + return PARAM_LIBCURL_DOESNT_SUPPORT; + config->ftp_ssl = toggle; + break; + case 'b': /* --ftp-pasv */ + Curl_safefree(config->ftpport); + break; + case 'c': /* --socks5 specifies a socks5 proxy to use, and resolves + the name locally and passes on the resolved address */ + GetStr(&config->socksproxy, nextarg); + config->socksver = CURLPROXY_SOCKS5; + break; + case 't': /* --socks4 specifies a socks4 proxy to use */ + GetStr(&config->socksproxy, nextarg); + config->socksver = CURLPROXY_SOCKS4; + break; + case 'T': /* --socks4a specifies a socks4a proxy to use */ + GetStr(&config->socksproxy, nextarg); + config->socksver = CURLPROXY_SOCKS4A; + break; + case '2': /* --socks5-hostname specifies a socks5 proxy and enables name + resolving with the proxy */ + GetStr(&config->socksproxy, nextarg); + config->socksver = CURLPROXY_SOCKS5_HOSTNAME; + break; + case 'd': /* --tcp-nodelay option */ + config->tcp_nodelay = toggle; + break; + case 'e': /* --proxy-digest */ + config->proxydigest = toggle; + break; + case 'f': /* --proxy-basic */ + config->proxybasic = toggle; + break; + case 'g': /* --retry */ + err = str2unum(&config->req_retry, nextarg); + if(err) + return err; + break; + case 'h': /* --retry-delay */ + err = str2unum(&config->retry_delay, nextarg); + if(err) + return err; + break; + case 'i': /* --retry-max-time */ + err = str2unum(&config->retry_maxtime, nextarg); + if(err) + return err; + break; + + case 'k': /* --proxy-negotiate */ + if(curlinfo->features & CURL_VERSION_SPNEGO) + config->proxynegotiate = toggle; + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + break; + + case 'm': /* --ftp-account */ + GetStr(&config->ftp_account, nextarg); + break; + case 'n': /* --proxy-anyauth */ + config->proxyanyauth = toggle; + break; + case 'o': /* --trace-time */ + global->tracetime = toggle; + break; + case 'p': /* --ignore-content-length */ + config->ignorecl = toggle; + break; + case 'q': /* --ftp-skip-pasv-ip */ + config->ftp_skip_ip = toggle; + break; + case 'r': /* --ftp-method (undocumented at this point) */ + config->ftp_filemethod = ftpfilemethod(config, nextarg); + break; + case 's': /* --local-port */ + rc = sscanf(nextarg, "%d - %d", + &config->localport, + &config->localportrange); + if(!rc) + return PARAM_BAD_USE; + else if(rc == 1) + config->localportrange = 1; /* default number of ports to try */ + else { + config->localportrange -= config->localport; + if(config->localportrange < 1) { + warnf(config, "bad range input\n"); + return PARAM_BAD_USE; + } + } + break; + case 'u': /* --ftp-alternative-to-user */ + GetStr(&config->ftp_alternative_to_user, nextarg); + break; + case 'v': /* --ftp-ssl-reqd */ + if(toggle && !(curlinfo->features & CURL_VERSION_SSL)) + return PARAM_LIBCURL_DOESNT_SUPPORT; + config->ftp_ssl_reqd = toggle; + break; + case 'w': /* --no-sessionid */ + config->disable_sessionid = (!toggle)?TRUE:FALSE; + break; + case 'x': /* --ftp-ssl-control */ + if(toggle && !(curlinfo->features & CURL_VERSION_SSL)) + return PARAM_LIBCURL_DOESNT_SUPPORT; + config->ftp_ssl_control = toggle; + break; + case 'y': /* --ftp-ssl-ccc */ + config->ftp_ssl_ccc = toggle; + if(!config->ftp_ssl_ccc_mode) + config->ftp_ssl_ccc_mode = CURLFTPSSL_CCC_PASSIVE; + break; + case 'j': /* --ftp-ssl-ccc-mode */ + config->ftp_ssl_ccc = TRUE; + config->ftp_ssl_ccc_mode = ftpcccmethod(config, nextarg); + break; + case 'z': /* --libcurl */ +#ifdef CURL_DISABLE_LIBCURL_OPTION + warnf(config, + "--libcurl option was disabled at build-time!\n"); + return PARAM_OPTION_UNKNOWN; +#else + GetStr(&global->libcurl, nextarg); + break; +#endif + case '#': /* --raw */ + config->raw = toggle; + break; + case '0': /* --post301 */ + config->post301 = toggle; + break; + case '1': /* --no-keepalive */ + config->nokeepalive = (!toggle)?TRUE:FALSE; + break; + case '3': /* --keepalive-time */ + err = str2unum(&config->alivetime, nextarg); + if(err) + return err; + break; + case '4': /* --post302 */ + config->post302 = toggle; + break; + case 'I': /* --post303 */ + config->post303 = toggle; + break; + case '5': /* --noproxy */ + /* This specifies the noproxy list */ + GetStr(&config->noproxy, nextarg); + break; +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + case '6': /* --socks5-gssapi-service */ + GetStr(&config->socks5_gssapi_service, nextarg); + break; + case '7': /* --socks5-gssapi-nec*/ + config->socks5_gssapi_nec = toggle; + break; +#endif + case '8': /* --proxy1.0 */ + /* http 1.0 proxy */ + GetStr(&config->proxy, nextarg); + config->proxyver = CURLPROXY_HTTP_1_0; + break; + case '9': /* --tftp-blksize */ + err = str2unum(&config->tftp_blksize, nextarg); + if(err) + return err; + break; + case 'A': /* --mail-from */ + GetStr(&config->mail_from, nextarg); + break; + case 'B': /* --mail-rcpt */ + /* append receiver to a list */ + err = add2list(&config->mail_rcpt, nextarg); + if(err) + return err; + break; + case 'C': /* --ftp-pret */ + config->ftp_pret = toggle; + break; + case 'D': /* --proto */ + config->proto_present = TRUE; + if(proto2num(config, &config->proto, nextarg)) + return PARAM_BAD_USE; + break; + case 'E': /* --proto-redir */ + config->proto_redir_present = TRUE; + if(proto2num(config, &config->proto_redir, nextarg)) + return PARAM_BAD_USE; + break; + case 'F': /* --resolve */ + err = add2list(&config->resolve, nextarg); + if(err) + return err; + break; + case 'G': /* --delegation LEVEL */ + config->gssapi_delegation = delegation(config, nextarg); + break; + case 'H': /* --mail-auth */ + GetStr(&config->mail_auth, nextarg); + break; + case 'J': /* --metalink */ + { +#ifdef USE_METALINK + int mlmaj, mlmin, mlpatch; + metalink_get_version(&mlmaj, &mlmin, &mlpatch); + if((mlmaj*10000)+(mlmin*100)+mlpatch < CURL_REQ_LIBMETALINK_VERS) { + warnf(config, + "--metalink option cannot be used because the version of " + "the linked libmetalink library is too old. " + "Required: %d.%d.%d, found %d.%d.%d\n", + CURL_REQ_LIBMETALINK_MAJOR, + CURL_REQ_LIBMETALINK_MINOR, + CURL_REQ_LIBMETALINK_PATCH, + mlmaj, mlmin, mlpatch); + return PARAM_BAD_USE; + } + else + config->use_metalink = toggle; +#else + warnf(config, "--metalink option is ignored because the binary is " + "built without the Metalink support.\n"); +#endif + break; + } + case 'K': /* --sasl-ir */ + config->sasl_ir = toggle; + break; + case 'L': /* --test-event */ +#ifdef CURLDEBUG + config->test_event_based = toggle; +#else + warnf(config, "--test-event is ignored unless a debug build!\n"); +#endif + break; + } + break; + case '#': /* --progress-bar */ + if(toggle) + global->progressmode = CURL_PROGRESS_BAR; + else + global->progressmode = CURL_PROGRESS_STATS; + break; + case ':': /* --next */ + return PARAM_NEXT_OPERATION; + case '~': /* --xattr */ + config->xattr = toggle; + break; + case '0': /* --http* options */ + switch(subletter) { + case '\0': + /* HTTP version 1.0 */ + config->httpversion = CURL_HTTP_VERSION_1_0; + break; + case '1': + /* HTTP version 1.1 */ + config->httpversion = CURL_HTTP_VERSION_1_1; + break; + case '2': + /* HTTP version 2.0 */ + config->httpversion = CURL_HTTP_VERSION_2_0; + break; + } + break; + case '1': /* --tlsv1* options */ + switch(subletter) { + case '\0': + /* TLS version 1.x */ + config->ssl_version = CURL_SSLVERSION_TLSv1; + break; + case '0': + /* TLS version 1.0 */ + config->ssl_version = CURL_SSLVERSION_TLSv1_0; + break; + case '1': + /* TLS version 1.1 */ + config->ssl_version = CURL_SSLVERSION_TLSv1_1; + break; + case '2': + /* TLS version 1.2 */ + config->ssl_version = CURL_SSLVERSION_TLSv1_2; + break; + } + break; + case '2': + /* SSL version 2 */ + config->ssl_version = CURL_SSLVERSION_SSLv2; + break; + case '3': + /* SSL version 3 */ + config->ssl_version = CURL_SSLVERSION_SSLv3; + break; + case '4': + /* IPv4 */ + config->ip_version = 4; + break; + case '6': + /* IPv6 */ + config->ip_version = 6; + break; + case 'a': + /* This makes the FTP sessions use APPE instead of STOR */ + config->ftp_append = toggle; + break; + case 'A': + /* This specifies the User-Agent name */ + GetStr(&config->useragent, nextarg); + break; + case 'b': /* cookie string coming up: */ + if(nextarg[0] == '@') { + nextarg++; + } + else if(strchr(nextarg, '=')) { + /* A cookie string must have a =-letter */ + GetStr(&config->cookie, nextarg); + break; + } + /* We have a cookie file to read from! */ + GetStr(&config->cookiefile, nextarg); + break; + case 'B': + /* use ASCII/text when transferring */ + config->use_ascii = toggle; + break; + case 'c': + /* get the file name to dump all cookies in */ + GetStr(&config->cookiejar, nextarg); + break; + case 'C': + /* This makes us continue an ftp transfer at given position */ + if(!curlx_strequal(nextarg, "-")) { + err = str2offset(&config->resume_from, nextarg); + if(err) + return err; + config->resume_from_current = FALSE; + } + else { + config->resume_from_current = TRUE; + config->resume_from = 0; + } + config->use_resume=TRUE; + break; + case 'd': + /* postfield data */ + { + char *postdata = NULL; + FILE *file; + size_t size = 0; + + if(subletter == 'e') { /* --data-urlencode*/ + /* [name]=[content], we encode the content part only + * [name]@[file name] + * + * Case 2: we first load the file using that name and then encode + * the content. + */ + const char *p = strchr(nextarg, '='); + size_t nlen; + char is_file; + if(!p) + /* there was no '=' letter, check for a '@' instead */ + p = strchr(nextarg, '@'); + if(p) { + nlen = p - nextarg; /* length of the name part */ + is_file = *p++; /* pass the separator */ + } + else { + /* neither @ nor =, so no name and it isn't a file */ + nlen = is_file = 0; + p = nextarg; + } + if('@' == is_file) { + /* a '@' letter, it means that a file name or - (stdin) follows */ + + if(curlx_strequal("-", p)) { + file = stdin; + set_binmode(stdin); + } + else { + file = fopen(p, "rb"); + if(!file) + warnf(config, + "Couldn't read data from file \"%s\", this makes " + "an empty POST.\n", nextarg); + } + + err = file2memory(&postdata, &size, file); + + if(file && (file != stdin)) + fclose(file); + if(err) + return err; + } + else { + GetStr(&postdata, p); + if(postdata) + size = strlen(postdata); + } + + if(!postdata) { + /* no data from the file, point to a zero byte string to make this + get sent as a POST anyway */ + postdata = strdup(""); + if(!postdata) + return PARAM_NO_MEM; + size = 0; + } + else { + char *enc = curl_easy_escape(config->easy, postdata, (int)size); + Curl_safefree(postdata); /* no matter if it worked or not */ + if(enc) { + /* now make a string with the name from above and append the + encoded string */ + size_t outlen = nlen + strlen(enc) + 2; + char *n = malloc(outlen); + if(!n) { + curl_free(enc); + return PARAM_NO_MEM; + } + if(nlen > 0) { /* only append '=' if we have a name */ + snprintf(n, outlen, "%.*s=%s", nlen, nextarg, enc); + size = outlen-1; + } + else { + strcpy(n, enc); + size = outlen-2; /* since no '=' was inserted */ + } + curl_free(enc); + postdata = n; + } + else + return PARAM_NO_MEM; + } + } + else if('@' == *nextarg) { + /* the data begins with a '@' letter, it means that a file name + or - (stdin) follows */ + nextarg++; /* pass the @ */ + + if(curlx_strequal("-", nextarg)) { + file = stdin; + if(subletter == 'b') /* forced data-binary */ + set_binmode(stdin); + } + else { + file = fopen(nextarg, "rb"); + if(!file) + warnf(config, "Couldn't read data from file \"%s\", this makes " + "an empty POST.\n", nextarg); + } + + if(subletter == 'b') + /* forced binary */ + err = file2memory(&postdata, &size, file); + else { + err = file2string(&postdata, file); + if(postdata) + size = strlen(postdata); + } + + if(file && (file != stdin)) + fclose(file); + if(err) + return err; + + if(!postdata) { + /* no data from the file, point to a zero byte string to make this + get sent as a POST anyway */ + postdata = strdup(""); + if(!postdata) + return PARAM_NO_MEM; + } + } + else { + GetStr(&postdata, nextarg); + if(postdata) + size = strlen(postdata); + } + +#ifdef CURL_DOES_CONVERSIONS + if(subletter != 'b') { + /* NOT forced binary, convert to ASCII */ + if(convert_to_network(postdata, strlen(postdata))) { + Curl_safefree(postdata); + return PARAM_NO_MEM; + } + } +#endif + + if(config->postfields) { + /* we already have a string, we append this one with a separating + &-letter */ + char *oldpost = config->postfields; + curl_off_t oldlen = config->postfieldsize; + curl_off_t newlen = oldlen + curlx_uztoso(size) + 2; + config->postfields = malloc((size_t)newlen); + if(!config->postfields) { + Curl_safefree(oldpost); + Curl_safefree(postdata); + return PARAM_NO_MEM; + } + memcpy(config->postfields, oldpost, (size_t)oldlen); + /* use byte value 0x26 for '&' to accommodate non-ASCII platforms */ + config->postfields[oldlen] = '\x26'; + memcpy(&config->postfields[oldlen+1], postdata, size); + config->postfields[oldlen+1+size] = '\0'; + Curl_safefree(oldpost); + Curl_safefree(postdata); + config->postfieldsize += size+1; + } + else { + config->postfields = postdata; + config->postfieldsize = curlx_uztoso(size); + } + } + /* + We can't set the request type here, as this data might be used in + a simple GET if -G is used. Already or soon. + + if(SetHTTPrequest(HTTPREQ_SIMPLEPOST, &config->httpreq)) { + Curl_safefree(postdata); + return PARAM_BAD_USE; + } + */ + break; + case 'D': + /* dump-header to given file name */ + GetStr(&config->headerfile, nextarg); + break; + case 'e': + { + char *ptr = strstr(nextarg, ";auto"); + if(ptr) { + /* Automatic referer requested, this may be combined with a + set initial one */ + config->autoreferer = TRUE; + *ptr = 0; /* zero terminate here */ + } + else + config->autoreferer = FALSE; + GetStr(&config->referer, nextarg); + } + break; + case 'E': + switch(subletter) { + case 'a': /* CA info PEM file */ + /* CA info PEM file */ + GetStr(&config->cacert, nextarg); + break; + case 'b': /* cert file type */ + GetStr(&config->cert_type, nextarg); + break; + case 'c': /* private key file */ + GetStr(&config->key, nextarg); + break; + case 'd': /* private key file type */ + GetStr(&config->key_type, nextarg); + break; + case 'e': /* private key passphrase */ + GetStr(&config->key_passwd, nextarg); + cleanarg(nextarg); + break; + case 'f': /* crypto engine */ + GetStr(&config->engine, nextarg); + if(config->engine && curlx_raw_equal(config->engine,"list")) + return PARAM_ENGINES_REQUESTED; + break; + case 'g': /* CA info PEM file */ + /* CA cert directory */ + GetStr(&config->capath, nextarg); + break; + case 'h': /* --pubkey public key file */ + GetStr(&config->pubkey, nextarg); + break; + case 'i': /* --hostpubmd5 md5 of the host public key */ + GetStr(&config->hostpubmd5, nextarg); + if(!config->hostpubmd5 || strlen(config->hostpubmd5) != 32) + return PARAM_BAD_USE; + break; + case 'j': /* CRL info PEM file */ + /* CRL file */ + GetStr(&config->crlfile, nextarg); + break; + case 'k': /* TLS username */ + if(curlinfo->features & CURL_VERSION_TLSAUTH_SRP) + GetStr(&config->tls_username, nextarg); + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + break; + case 'l': /* TLS password */ + if(curlinfo->features & CURL_VERSION_TLSAUTH_SRP) + GetStr(&config->tls_password, nextarg); + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + break; + case 'm': /* TLS authentication type */ + if(curlinfo->features & CURL_VERSION_TLSAUTH_SRP) { + GetStr(&config->tls_authtype, nextarg); + if(!strequal(config->tls_authtype, "SRP")) + return PARAM_LIBCURL_DOESNT_SUPPORT; /* only support TLS-SRP */ + } + else + return PARAM_LIBCURL_DOESNT_SUPPORT; + break; + case 'n': /* no empty SSL fragments, --ssl-allow-beast */ + if(curlinfo->features & CURL_VERSION_SSL) + config->ssl_allow_beast = toggle; + break; + + case 'o': /* --login-options */ + GetStr(&config->login_options, nextarg); + break; + + default: /* certificate file */ + { + char *certname, *passphrase; + parse_cert_parameter(nextarg, &certname, &passphrase); + Curl_safefree(config->cert); + config->cert = certname; + if(passphrase) { + Curl_safefree(config->key_passwd); + config->key_passwd = passphrase; + } + cleanarg(nextarg); + } + } + break; + case 'f': + /* fail hard on errors */ + config->failonerror = toggle; + break; + case 'F': + /* "form data" simulation, this is a little advanced so lets do our best + to sort this out slowly and carefully */ + if(formparse(config, + nextarg, + &config->httppost, + &config->last_post, + (subletter=='s')?TRUE:FALSE)) /* 's' means literal string */ + return PARAM_BAD_USE; + if(SetHTTPrequest(config, HTTPREQ_POST, &config->httpreq)) + return PARAM_BAD_USE; + break; + + case 'g': /* g disables URLglobbing */ + config->globoff = toggle; + break; + + case 'G': /* HTTP GET */ + config->use_httpget = TRUE; + break; + + case 'h': /* h for help */ + if(toggle) { + return PARAM_HELP_REQUESTED; + } + /* we now actually support --no-help too! */ + break; + case 'H': + /* A custom header to append to a list */ + if(subletter == 'p') /* --proxy-header */ + err = add2list(&config->proxyheaders, nextarg); + else + err = add2list(&config->headers, nextarg); + if(err) + return err; + break; + case 'i': + config->include_headers = toggle; /* include the headers as well in the + general output stream */ + break; + case 'j': + config->cookiesession = toggle; + break; + case 'I': + /* + * no_body will imply include_headers later on + */ + config->no_body = toggle; + if(SetHTTPrequest(config, + (config->no_body)?HTTPREQ_HEAD:HTTPREQ_GET, + &config->httpreq)) + return PARAM_BAD_USE; + break; + case 'J': /* --remote-header-name */ + if(config->include_headers) { + warnf(config, + "--include and --remote-header-name cannot be combined.\n"); + return PARAM_BAD_USE; + } + config->content_disposition = toggle; + break; + case 'k': /* allow insecure SSL connects */ + config->insecure_ok = toggle; + break; + case 'K': /* parse config file */ + if(parseconfig(nextarg, global)) + warnf(config, "error trying read config from the '%s' file\n", + nextarg); + break; + case 'l': + config->dirlistonly = toggle; /* only list the names of the FTP dir */ + break; + case 'L': + config->followlocation = toggle; /* Follow Location: HTTP headers */ + switch (subletter) { + case 't': + /* Continue to send authentication (user+password) when following + * locations, even when hostname changed */ + config->unrestricted_auth = toggle; + break; + } + break; + case 'm': + /* specified max time */ + err = str2udouble(&config->timeout, nextarg); + if(err) + return err; + break; + case 'M': /* M for manual, huge help */ + if(toggle) { /* --no-manual shows no manual... */ +#ifdef USE_MANUAL + return PARAM_MANUAL_REQUESTED; +#else + warnf(config, + "built-in manual was disabled at build-time!\n"); + return PARAM_OPTION_UNKNOWN; +#endif + } + break; + case 'n': + switch(subletter) { + case 'o': /* CA info PEM file */ + /* use .netrc or URL */ + config->netrc_opt = toggle; + break; + case 'e': /* netrc-file */ + GetStr(&config->netrc_file, nextarg); + break; + default: + /* pick info from .netrc, if this is used for http, curl will + automatically enfore user+password with the request */ + config->netrc = toggle; + break; + } + break; + case 'N': + /* disable the output I/O buffering. note that the option is called + --buffer but is mostly used in the negative form: --no-buffer */ + if(longopt) + config->nobuffer = (!toggle)?TRUE:FALSE; + else + config->nobuffer = toggle; + break; + case 'O': /* --remote-name */ + if(subletter == 'a') { /* --remote-name-all */ + config->default_node_flags = toggle?GETOUT_USEREMOTE:0; + break; + } + /* fall-through! */ + case 'o': /* --output */ + /* output file */ + { + struct getout *url; + if(config->url_out || ((config->url_out = config->url_list) != NULL)) { + /* there's a node here, if it already is filled-in continue to find + an "empty" node */ + while(config->url_out && (config->url_out->flags & GETOUT_OUTFILE)) + config->url_out = config->url_out->next; + } + + /* now there might or might not be an available node to fill in! */ + + if(config->url_out) + /* existing node */ + url = config->url_out; + else + /* there was no free node, create one! */ + url = new_getout(config); + + if(!url) + return PARAM_NO_MEM; + else { + /* fill in the outfile */ + if('o' == letter) { + GetStr(&url->outfile, nextarg); + url->flags &= ~GETOUT_USEREMOTE; /* switch off */ + } + else { + url->outfile = NULL; /* leave it */ + if(toggle) + url->flags |= GETOUT_USEREMOTE; /* switch on */ + else + url->flags &= ~GETOUT_USEREMOTE; /* switch off */ + } + url->flags |= GETOUT_OUTFILE; + } + } + break; + case 'P': + /* This makes the FTP sessions use PORT instead of PASV */ + /* use or <192.168.10.10> style addresses. Anything except + this will make us try to get the "default" address. + NOTE: this is a changed behaviour since the released 4.1! + */ + GetStr(&config->ftpport, nextarg); + break; + case 'p': + /* proxy tunnel for non-http protocols */ + config->proxytunnel = toggle; + break; + + case 'q': /* if used first, already taken care of, we do it like + this so we don't cause an error! */ + break; + case 'Q': + /* QUOTE command to send to FTP server */ + switch(nextarg[0]) { + case '-': + /* prefixed with a dash makes it a POST TRANSFER one */ + nextarg++; + err = add2list(&config->postquote, nextarg); + break; + case '+': + /* prefixed with a plus makes it a just-before-transfer one */ + nextarg++; + err = add2list(&config->prequote, nextarg); + break; + default: + err = add2list(&config->quote, nextarg); + break; + } + if(err) + return err; + break; + case 'r': + /* Specifying a range WITHOUT A DASH will create an illegal HTTP range + (and won't actually be range by definition). The man page previously + claimed that to be a good way, why this code is added to work-around + it. */ + if(ISDIGIT(*nextarg) && !strchr(nextarg, '-')) { + char buffer[32]; + curl_off_t off; + warnf(config, + "A specified range MUST include at least one dash (-). " + "Appending one for you!\n"); + off = curlx_strtoofft(nextarg, NULL, 10); + snprintf(buffer, sizeof(buffer), "%" CURL_FORMAT_CURL_OFF_T "-", off); + Curl_safefree(config->range); + config->range = strdup(buffer); + if(!config->range) + return PARAM_NO_MEM; + } + { + /* byte range requested */ + char *tmp_range; + tmp_range = nextarg; + while(*tmp_range != '\0') { + if(!ISDIGIT(*tmp_range) && *tmp_range != '-' && *tmp_range != ',') { + warnf(config,"Invalid character is found in given range. " + "A specified range MUST have only digits in " + "\'start\'-\'stop\'. The server's response to this " + "request is uncertain.\n"); + break; + } + tmp_range++; + } + /* byte range requested */ + GetStr(&config->range, nextarg); + } + break; + case 'R': + /* use remote file's time */ + config->remote_time = toggle; + break; + case 's': + /* don't show progress meter, don't show errors : */ + if(toggle) + global->mute = global->noprogress = TRUE; + else + global->mute = global->noprogress = FALSE; + if(global->showerror < 0) + /* if still on the default value, set showerror to the reverse of + toggle. This is to allow -S and -s to be used in an independent + order but still have the same effect. */ + global->showerror = (!toggle)?TRUE:FALSE; /* toggle off */ + break; + case 'S': + /* show errors */ + global->showerror = toggle?1:0; /* toggle on if used with -s */ + break; + case 't': + /* Telnet options */ + err = add2list(&config->telnet_options, nextarg); + if(err) + return err; + break; + case 'T': + /* we are uploading */ + { + struct getout *url; + if(config->url_out || ((config->url_out = config->url_list) != NULL)) { + /* there's a node here, if it already is filled-in continue to find + an "empty" node */ + while(config->url_out && (config->url_out->flags & GETOUT_UPLOAD)) + config->url_out = config->url_out->next; + } + + /* now there might or might not be an available node to fill in! */ + + if(config->url_out) + /* existing node */ + url = config->url_out; + else + /* there was no free node, create one! */ + url = new_getout(config); + + if(!url) + return PARAM_NO_MEM; + else { + url->flags |= GETOUT_UPLOAD; /* mark -T used */ + if(!*nextarg) + url->flags |= GETOUT_NOUPLOAD; + else { + /* "-" equals stdin, but keep the string around for now */ + GetStr(&url->infile, nextarg); + } + } + } + break; + case 'u': + /* user:password */ + GetStr(&config->userpwd, nextarg); + cleanarg(nextarg); + break; + case 'U': + /* Proxy user:password */ + GetStr(&config->proxyuserpwd, nextarg); + cleanarg(nextarg); + break; + case 'v': + if(toggle) { + /* the '%' thing here will cause the trace get sent to stderr */ + Curl_safefree(global->trace_dump); + global->trace_dump = strdup("%"); + if(!global->trace_dump) + return PARAM_NO_MEM; + if(global->tracetype && (global->tracetype != TRACE_PLAIN)) + warnf(config, + "-v, --verbose overrides an earlier trace/verbose option\n"); + global->tracetype = TRACE_PLAIN; + } + else + /* verbose is disabled here */ + global->tracetype = TRACE_NONE; + break; + case 'V': + if(toggle) /* --no-version yields no output! */ + return PARAM_VERSION_INFO_REQUESTED; + break; + + case 'w': + /* get the output string */ + if('@' == *nextarg) { + /* the data begins with a '@' letter, it means that a file name + or - (stdin) follows */ + FILE *file; + const char *fname; + nextarg++; /* pass the @ */ + if(curlx_strequal("-", nextarg)) { + fname = ""; + file = stdin; + } + else { + fname = nextarg; + file = fopen(nextarg, "r"); + } + err = file2string(&config->writeout, file); + if(file && (file != stdin)) + fclose(file); + if(err) + return err; + if(!config->writeout) + warnf(config, "Failed to read %s", fname); + } + else + GetStr(&config->writeout, nextarg); + break; + case 'x': + /* proxy */ + GetStr(&config->proxy, nextarg); + config->proxyver = CURLPROXY_HTTP; + break; + case 'X': + /* set custom request */ + GetStr(&config->customrequest, nextarg); + break; + case 'y': + /* low speed time */ + err = str2unum(&config->low_speed_time, nextarg); + if(err) + return err; + if(!config->low_speed_limit) + config->low_speed_limit = 1; + break; + case 'Y': + /* low speed limit */ + err = str2unum(&config->low_speed_limit, nextarg); + if(err) + return err; + if(!config->low_speed_time) + config->low_speed_time = 30; + break; + case 'z': /* time condition coming up */ + switch(*nextarg) { + case '+': + nextarg++; + default: + /* If-Modified-Since: (section 14.28 in RFC2068) */ + config->timecond = CURL_TIMECOND_IFMODSINCE; + break; + case '-': + /* If-Unmodified-Since: (section 14.24 in RFC2068) */ + config->timecond = CURL_TIMECOND_IFUNMODSINCE; + nextarg++; + break; + case '=': + /* Last-Modified: (section 14.29 in RFC2068) */ + config->timecond = CURL_TIMECOND_LASTMOD; + nextarg++; + break; + } + now = time(NULL); + config->condtime=curl_getdate(nextarg, &now); + if(-1 == (int)config->condtime) { + /* now let's see if it is a file name to get the time from instead! */ + struct_stat statbuf; + if(-1 == stat(nextarg, &statbuf)) { + /* failed, remove time condition */ + config->timecond = CURL_TIMECOND_NONE; + warnf(config, + "Illegal date format for -z, --timecond (and not " + "a file name). Disabling time condition. " + "See curl_getdate(3) for valid date syntax.\n"); + } + else { + /* pull the time out from the file */ + config->condtime = statbuf.st_mtime; + } + } + break; + default: /* unknown flag */ + return PARAM_OPTION_UNKNOWN; + } + hit = -1; + + } while(!longopt && !singleopt && *++parse && !*usedarg); + + return PARAM_OK; +} + +ParameterError parse_args(struct GlobalConfig *config, int argc, + argv_item_t argv[]) +{ + int i; + bool stillflags; + char *orig_opt = NULL; + ParameterError result = PARAM_OK; + struct OperationConfig *operation = config->first; + + for(i = 1, stillflags = TRUE; i < argc && !result; i++) { + orig_opt = argv[i]; + + if(stillflags && ('-' == argv[i][0])) { + char *nextarg; + bool passarg; + char *flag = argv[i]; + + if(curlx_strequal("--", argv[i])) + /* This indicates the end of the flags and thus enables the + following (URL) argument to start with -. */ + stillflags = FALSE; + else { + nextarg = (i < (argc - 1)) ? argv[i + 1] : NULL; + + result = getparameter(flag, nextarg, &passarg, config, operation); + if(result == PARAM_NEXT_OPERATION) { + /* Reset result as PARAM_NEXT_OPERATION is only used here and not + returned from this function */ + result = PARAM_OK; + + if(operation->url_list && operation->url_list->url) { + /* Allocate the next config */ + operation->next = malloc(sizeof(struct OperationConfig)); + if(operation->next) { + /* Initialise the newly created config */ + config_init(operation->next); + + /* Copy the easy handle */ + operation->next->easy = config->easy; + + /* Set the global config pointer */ + operation->next->global = config; + + /* Update the last operation pointer */ + config->last = operation->next; + + /* Move onto the new config */ + operation->next->prev = operation; + operation = operation->next; + } + else + result = PARAM_NO_MEM; + } + } + else if(!result && passarg) + i++; /* we're supposed to skip this */ + } + } + else { + bool used; + + /* Just add the URL please */ + result = getparameter((char *)"--url", argv[i], &used, config, + operation); + } + } + + if(result && result != PARAM_HELP_REQUESTED && + result != PARAM_MANUAL_REQUESTED && + result != PARAM_VERSION_INFO_REQUESTED && + result != PARAM_ENGINES_REQUESTED) { + const char *reason = param2text(result); + + if(orig_opt && !curlx_strequal(":", orig_opt)) + helpf(config->errors, "option %s: %s\n", orig_opt, reason); + else + helpf(config->errors, "%s\n", reason); + } + + return result; +} -- cgit 1.2.3-korg