From d18ae43123fcd7604d1c36a1ec8450dbe6071824 Mon Sep 17 00:00:00 2001 From: Luca Muscariello Date: Thu, 23 Feb 2017 20:44:26 +0100 Subject: Initial commit: ccnxlibs. Change-Id: I1b376527a7dd01a6b9e083a6cb646955902f45c0 Signed-off-by: Luca Muscariello --- .../ccnx/common/codec/ccnxCodec_TlvEncoder.h | 755 +++++++++++++++++++++ 1 file changed, 755 insertions(+) create mode 100644 libccnx-common/ccnx/common/codec/ccnxCodec_TlvEncoder.h (limited to 'libccnx-common/ccnx/common/codec/ccnxCodec_TlvEncoder.h') diff --git a/libccnx-common/ccnx/common/codec/ccnxCodec_TlvEncoder.h b/libccnx-common/ccnx/common/codec/ccnxCodec_TlvEncoder.h new file mode 100644 index 00000000..443eeca0 --- /dev/null +++ b/libccnx-common/ccnx/common/codec/ccnxCodec_TlvEncoder.h @@ -0,0 +1,755 @@ +/* + * Copyright (c) 2017 Cisco and/or its affiliates. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + * @file ccnxCodec_TlvEncoder.h + * @ingroup networking + * @brief TLV codec for messages + * + * TLV encoder + * + * Terminology: + * type = a field that labels a value + * length = the byte lenth of the value + * value = the data + * header = type + length + * container= a value that contains TLVs + * + * For example, in this structure, the "type 1" TLV is a container that holds a second TLV + * The second TLV is a terminal, and holds an opaque value. + * + * { .type = 1, .length = 20, .value = { .type = 2, .length = 16, .value ="It was a dark a " } } + * + * Example to encode a container that wraps a name and an address: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *nameAndAddress = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * + * // Initialize starts a new buffer + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 3, nameAndAddress); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *container = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * + * parcBuffer_Destroy(&nameAndAddress); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * + * // now use the container for something... + * } + * @endcode + * + * The TLV will look something like this: + * @code + * { .type = 3, .length = L1 + L2 + overhead, .value = { + * {.type = 1, .length = L1, .value = name}, + * {.type = 2, .length = L2, .value = address} + * } + * } + * @endcode + * + * An alternative way to encode it that does not require recursive encoder is to use Position: + * @code + * { + * // Creates {{T=3, L=length, V={{T=1, L=..., V=name}, {T=2, L=..., V=address}}}} + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * size_t offset = ccnxCodecTlvEncoder_Position(encoder); + * ccnxCodecTlvEncoder_AppendContainer(encoder, 3, 0); + * size_t length = 0; + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 1, name); + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 2, address); + * ccnxCodecTlvEncoder_SetContainerLength(encoder, offset, length); + * } + * @endcode + * + */ + +#ifndef libccnx_ccnx_TlvEncoder_h +#define libccnx_ccnx_TlvEncoder_h + +#include +#include +#include +#include + +#include + +// ====================================================== + +struct ccnx_codec_tlv_encoder; +typedef struct ccnx_codec_tlv_encoder CCNxCodecTlvEncoder; + +/** + * Creates a TLV encoder + * + * The encoder is re-usable, as the state is reset for each Initialize. + * + * @return non-null A TLV encoder + * + * Example: + * @code + * <#example#> + * @endcode + */ +CCNxCodecTlvEncoder *ccnxCodecTlvEncoder_Create(void); + +/** + * Destroys the TLV encoder and all internal state + * + * <#Paragraphs Of Explanation#> + * + * @param [<#in out in,out#>] <#name#> <#description#> + * + * Example: + * @code + * <#example#> + * @endcode + */ +void ccnxCodecTlvEncoder_Destroy(CCNxCodecTlvEncoder **encoderPtr); + +/** + * Initialize the encoder to start a new encoding + * + * <#Paragraphs Of Explanation#> + * + * @param [in] tlv <#description#> + * + * @return non-null The encoder + * + * Example: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +CCNxCodecTlvEncoder *ccnxCodecTlvEncoder_Initialize(CCNxCodecTlvEncoder *encoder); + +/** + * Appends a TL container and a PARCBuffer to the enoder + * + * The type is from the parameter `type', the length is from the remaining size + * of the value buffer, and the value comes from `value'. + * + * @param [in] encoder The encoder to append to + * @param [in] type The TLV type + * @param [in] value The length is the remaining buffer size, the position is advanced. + * + * @return number The total bytes of the TLV, including the T and L. + * + * Example: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendBuffer(CCNxCodecTlvEncoder *encoder, uint16_t type, PARCBuffer *value); + +/** + * Appends a "TL" container then the bytes of the array + * + * Writes a Type of 'type' and Length of 'length' then appends 'length' bytes from + * the array to the encoder. + * + * @param [in] encoder An allocated CCnxCodecTlvEncoder + * @param [in] type The TLV type + * @param [in] length The TLV length + * @param [in] array The bytes to append + * + * @return number The number of bytes appended (including the T and L) + * + * Example: + * @code + * <#example#> + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendArray(CCNxCodecTlvEncoder *encoder, uint16_t type, uint16_t length, const uint8_t *array); + +/** + * Appends a TL without a V. + * + * Appends a T and L without a V. Useful for doing a heirarchical encoding where the V + * will be more TLVs. You will either need to know L or go back and fix it up. + * + * @param [in] encoder The encoder to modify + * @param [in] type The TLV type + * @param [in] length The TLV length, use 0 if you do not know. + * + * @return bytes The bytes appended (the size of the T and L) + * + * Example: + * @code + * { + * // Creates {{ T=99, L=.., V=SequenceNumber }, {T=1, L=length, V={{T=2, L=..., V=name}, {T=3, L=..., V=address}}}} + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_AppendBuffer(encoder, 99, sequenceNumber); + * size_t offset = ccnxCodecTlvEncoder_Position(encoder); + * ccnxCodecTlvEncoder_AppendContainer(encoder, 1, 0); + * size_t length = 0; + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 2, name); + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 3, address); + * ccnxCodecTlvEncoder_SetContainerLength(encoder, offset, length); + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendContainer(CCNxCodecTlvEncoder *encoder, uint16_t type, uint16_t length); + +/** + * Adds a TLV with an 8-bit value + * + * Uses network byte order for the value. The returned size includes + * the type and length lengths plus the value length. + * + * @param [in] encoder The TLV encoder + * @param [in] type The Type value to use for the container + * @param [in] value The value to encode + * + * @return number The number of bytes appended to the encoded (5) + * + * Example: + * @code + * { + * // encoded buffer with be { .type = 1, .length = 1, .value = 0x19 } + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_AppendUint8(encoder, 1, (uint8_t) 25); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendUint8(CCNxCodecTlvEncoder *encoder, uint16_t type, uint8_t value); + +/** + * Adds a TLV with a 16-bit value + * + * Uses network byte order for the value. The returned size includes + * the type and length lengths plus the value length. + * + * @param [in] encoder The TLV encoder + * @param [in] type The Type value to use for the container + * @param [in] value The value to encode + * + * @return number The number of bytes appended to the encoded (6) + * + * Example: + * @code + * { + * // encoded buffer with be { .type = 1, .length = 2, .value = 0x1234 } + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_AppendUint16(encoder, 1, (uint16_t) 0x1234); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendUint16(CCNxCodecTlvEncoder *encoder, uint16_t type, uint16_t value); + +/** + * Adds a TLV with a 32-bit value + * + * Uses network byte order for the value. The returned size includes + * the type and length lengths plus the value length. + * + * @param [in] encoder The TLV encoder + * @param [in] type The Type value to use for the container + * @param [in] value The value to encode + * + * @return number The number of bytes appended to the encoded (8) + * + * Example: + * @code + * { + * // encoded buffer with be { .type = 1, .length = 4, .value = 0x12345678 } + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_AppendUint32(encoder, 1, (uint32_t) 0x12345678); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendUint32(CCNxCodecTlvEncoder *encoder, uint16_t type, uint32_t value); + + +/** + * Adds a TLV with a 64-bit value + * + * Uses network byte order for the value. The returned size includes + * the type and length lengths plus the value length. + * + * @param [in] encoder The TLV encoder + * @param [in] type The Type value to use for the container + * @param [in] value The value to encode + * + * @return number The number of bytes appended to the encoded (8) + * + * Example: + * @code + * { + * // encoded buffer with be { .type = 1, .length = 8, .value = 0x0000000012345678 } + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_AppendUint64(encoder, 1, (uint64_t) 0x12345678); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendUint64(CCNxCodecTlvEncoder *encoder, uint16_t type, uint64_t value); + +/** + * Returns the current encoding buffer position + * + * This is useful if you need to backtrack to fill in a length you did not know before. + * + * @param [in] encoder The Tlv encoder object + * + * @return number The byte offset of the encode buffer + * + * Example: + * @code + * { + * // Creates {{ T=99, L=.., V=SequenceNumber }, {T=1, L=length, V={{T=2, L=..., V=name}, {T=3, L=..., V=address}}}} + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_AppendBuffer(encoder, 99, sequenceNumber); + * size_t offset = ccnxCodecTlvEncoder_Position(encoder); + * ccnxCodecTlvEncoder_AppendContainer(encoder, 1, 0); + * size_t length = 0; + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 2, name); + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 3, address); + * ccnxCodecTlvEncoder_SetContainerLength(encoder, offset, length); + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_Position(CCNxCodecTlvEncoder *encoder); + +/** + * Used to rewind and erase + * + * For example, you called ccnxCodecTlvEncoder_AppendContainer() then found out that + * the container was empty. If you rewind to just before you added the container, it + * is as if the container were never added. + * + * @param [in] position Must be no more than ccnxCodecTlvEncoder_Position() + * + * @return number The position after calling SetPosition + * + * Example: + * @code + * <#example#> + * @endcode + */ +size_t ccnxCodecTlvEncoder_SetPosition(CCNxCodecTlvEncoder *encoder, size_t position); + +/** + * Sets the length field of the container at the given offset + * + * User `ccnxCodecTlvEncoder_Position' before `ccnxCodecTlvEncoder_AppendContainer' to get the container's + * offset. You can then set that container's length with this function. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * @param [in] offset position of the container in the Tlv Encoder + * @param [in] length The container length to set + * + * Example: + * @code + * { + * // Creates {{ T=99, L=.., V=SequenceNumber }, {T=1, L=length, V={{T=2, L=..., V=name}, {T=3, L=..., V=address}}}} + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_AppendBuffer(encoder, 99, sequenceNumber); + * size_t offset = ccnxCodecTlvEncoder_Position(encoder); + * ccnxCodecTlvEncoder_AppendContainer(encoder, 1, 0); + * size_t length = 0; + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 2, name); + * length += ccnxCodecTlvEncoder_AppendBuffer(encoder, 3, address); + * ccnxCodecTlvEncoder_SetContainerLength(encoder, offset, length); + * } + * @endcode + */ +void ccnxCodecTlvEncoder_SetContainerLength(CCNxCodecTlvEncoder *encoder, size_t offset, uint16_t length); + +/** + * Finalizes the encoding and returns the encoded buffer + * + * The buffer is ready for reading. In specific, it will truncate the buffer at the + * current position, setting the Limit to that location. This will cut off any + * writes to the buffer that have been "erased" by setting the position to an + * earlier location. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * Example: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +void ccnxCodecTlvEncoder_Finalize(CCNxCodecTlvEncoder *encoder); + +/** + * Creates a PARCBuffer from position 0 to the Limit. + * + * Returns a PARCBuffer from position 0 to the Limit. If the user has called + * ccnxCodecTlvEncoder_SetPosition() to rewind the buffer, the user should likely call + * ccnxCodecTlvEncoder_Finalize() to trim the Limit, otherwise there may be unexpected + * bytes at the end. + * + * The PARCBuffer representation is not the native form of the buffer and will result + * in a deep copy of the buffer. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @return non-null An allocated PARCBuffer, use parcBuffer_Release() on it + * @return null An error. + * + * Example: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_Finalize(encoder); + * PARCBuffer *encoded = ccnxCodecTlvEncoder_CreateBuffer(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +PARCBuffer *ccnxCodecTlvEncoder_CreateBuffer(CCNxCodecTlvEncoder *encoder); + +/** + * Creates a vectored I/O representation of the encoder + * + * Returns a CCNxCodecNetworkBufferIoVec from position 0 to the Limit. If the user has called + * ccnxCodecTlvEncoder_SetPosition() to rewind the buffer, the user should likely call + * ccnxCodecTlvEncoder_Finalize() to trim the Limit, otherwise there may be unexpected + * bytes at the end. + * + * The CCNxCodecNetworkBufferIoVec is the native form of the memory and does not involve any copies. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @return non-null An allocated CCNxCodecNetworkBufferIoVec, use CCNxCodecNetworkBufferIoVec_Release() on it + * @return null An error. + * + * Example: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Initialize(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_Finalize(encoder); + * CCNxCodecNetworkBufferIoVec *iovec = ccnxCodecTlvEncoder_CreateIoVec(encoder); + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +CCNxCodecNetworkBufferIoVec *ccnxCodecTlvEncoder_CreateIoVec(CCNxCodecTlvEncoder *encoder); + +/** + * Marks the current position as the start of the signature + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * Example: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_MarkSignatureStart(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_MarkSignatureEnd(encoder); + * + * // The signature is calcualted over the TLV field of the "address" + * PARCSignature *sig = ccnxCodecTlvEncoder_ComputeSignature(encoder, signer); + * + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +void ccnxCodecTlvEncoder_MarkSignatureStart(CCNxCodecTlvEncoder *encoder); + +/** + * Marks the current position as the end (non-inclusive) of the Signature + * Example: + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_MarkSignatureStart(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_MarkSignatureEnd(encoder); + * + * // The signature is calcualted over the TLV field of the "address" + * PARCSignature *sig = ccnxCodecTlvEncoder_ComputeSignature(encoder, signer); + * + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +void ccnxCodecTlvEncoder_MarkSignatureEnd(CCNxCodecTlvEncoder *encoder); + +/** + * Computes the cryptographic signature over the designated area. + * If both a Start and End have not been set, function will assert + * + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @retval non-null An allocated PARCSignature + * @retval null An error + * + * Example: + * @code + * { + * CCNxCodecTlvEncoder *encoder = ccnxCodecTlvEncoder_Create(); + * ccnxCodecTlvEncoder_Append(encoder, 1, name); + * ccnxCodecTlvEncoder_MarkSignatureStart(encoder); + * ccnxCodecTlvEncoder_Append(encoder, 2, address); + * ccnxCodecTlvEncoder_MarkSignatureEnd(encoder); + * + * // The signature is calcualted over the TLV field of the "address" + * ccnxCodecTlvEncoder_SetSigner(signer); + * PARCSignature *sig = ccnxCodecTlvEncoder_ComputeSignature(encoder); + * + * ccnxCodecTlvEncoder_Destroy(&encoder); + * } + * @endcode + */ +PARCSignature *ccnxCodecTlvEncoder_ComputeSignature(CCNxCodecTlvEncoder *encoder); + +/** + * Puts a uint8_t at the specified position. + * + * Does not modify the current position of the Tlv Encoder + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @return number The number of bytes put + * + * Example: + * @code + * { + * <#example#> + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_PutUint8(CCNxCodecTlvEncoder *encoder, size_t offset, uint8_t value); + +/** + * Puts a uint16_t at the specified position. + * + * Does not modify the current position of the Tlv Encoder + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @return number The number of bytes put + * + * Example: + * @code + * { + * <#example#> + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_PutUint16(CCNxCodecTlvEncoder *encoder, size_t offset, uint16_t value); + +/** + * Writes an array to the current position. No "TL" container is written. + * + * Unlike ccnxCodecTlvEncoder_AppendArray, this does not append a Type and Length container for the array. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * @param [in] length The number of bytes from array to write + * @param [in] array The source array + * + * @return number The number of bytes appended to the encoder + * + * Example: + * @code + * { + * <#example#> + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendRawArray(CCNxCodecTlvEncoder *encoder, size_t length, uint8_t *array); + + +/** + * Determines if the TLV Encoder has an error condition set + * + * <#Paragraphs Of Explanation#> + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @retval true An error condition is set + * @retval false No error condition is set + * + * Example: + * @code + * <#example#> + * @endcode + */ +bool ccnxCodecTlvEncoder_HasError(const CCNxCodecTlvEncoder *encoder); + +/** + * Sets an error condition. Only one error condition may be set. + * + * Stores a reference counted copy of the CCNxCodecError. If an error is already set, + * this function returns false and does not store a reference to the error. The previous error + * stays as the current error. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @return true Error condition set + * @return false Error already set, you must clear it first + * + * Example: + * @code + * <#example#> + * @endcode + */ +bool ccnxCodecTlvEncoder_SetError(CCNxCodecTlvEncoder *encoder, CCNxCodecError *error); + +/** + * Clears the error condition, if any + * + * <#Paragraphs Of Explanation#> + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * Example: + * @code + * <#example#> + * @endcode + */ +void ccnxCodecTlvEncoder_ClearError(CCNxCodecTlvEncoder *encoder); + +/** + * Retrieves the error message + * + * Retrieves the error condition, if any. If no error is set, will return NULL. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @return non-null The error condition set + * @return null No error condition is set + * + * Example: + * @code + * <#example#> + * @endcode + */ +CCNxCodecError *ccnxCodecTlvEncoder_GetError(const CCNxCodecTlvEncoder *encoder); + + +/** + * Associates a signer with the encoder for producing signatures or MACs + * + * Stores a reference counted copy of the signer. The reference will be released with the + * CCNxCodecTlvEncoder is released or if this function is called multiple times. + * + * It is allowed to set a NULL singer. + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * @param [in] singer Assocaited a PARCSigner with the encoder, storing a reference to it + * + * Example: + * @code + * <#example#> + * @endcode + */ +void ccnxCodecTlvEncoder_SetSigner(CCNxCodecTlvEncoder *encoder, PARCSigner *signer); + +/** + * Returns the PARCSigner associated with the encoder, if any + * + * <#Paragraphs Of Explanation#> + * + * @param [in] encoder An allocated CCNxCodecTlvEncoder + * + * @return non-null The signer assocated with the encoder + * @return null There is no singer associated with the encoder + * + * Example: + * @code + * <#example#> + * @endcode + */ +PARCSigner *ccnxCodecTlvEncoder_GetSigner(const CCNxCodecTlvEncoder *encoder); + +/** + * Appends a TLV container holding the value as a VarInt + * + * A VarInt may be 1 to 8 bytes long. It is interpreted as an unsigned + * integer in network byte order. The value of "0" is encoded as a single + * byte of "0". + * + * @param [in] decoder The TLV decoder + * @param [in] type The Type value to use for the container + * @param [in] value The value of the varint + * + * @return number The number of bytes appended + * + * Example: + * @code + * { + * uint64_t value = 0x0000000000102300 + * size_t length = ccnxCodecTlvEncoder_AppendVarInt(encoder, 12, value); + * // length = 7 + * // appedned { 0x00, 0x0C, 0x00, 0x03, 0x10, 0x23, 0x00 } + * } + * @endcode + */ +size_t ccnxCodecTlvEncoder_AppendVarInt(CCNxCodecTlvEncoder *encoder, uint16_t type, uint64_t value); + +#endif // libccnx_ccnx_TlvEncoder_h -- cgit 1.2.3-korg