/* * Copyright (c) 2000-2013 Apple Inc. All rights reserved. * * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ * * This file contains Original Code and/or Modifications of Original Code * as defined in and that are subject to the Apple Public Source License * Version 2.0 (the 'License'). You may not use this file except in * compliance with the License. The rights granted to you under the License * may not be used to create, or enable the creation or redistribution of, * unlawful or unlicensed copies of an Apple operating system, or to * circumvent, violate, or enable the circumvention or violation of, any * terms of an Apple operating system software license agreement. * * Please obtain a copy of the License at * http://www.opensource.apple.com/apsl/ and read it before using this file. * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. * Please see the License for the specific language governing rights and * limitations under the License. * * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ */ /* $NetBSD: if_media.h,v 1.3 1997/03/26 01:19:27 thorpej Exp $ */ /* $FreeBSD: src/sys/net/if_media.h,v 1.9.2.1 2001/07/04 00:12:38 brooks Exp $ */ /* * Copyright (c) 1997 * Jonathan Stone and Jason R. Thorpe. All rights reserved. * * This software is derived from information provided by Matt Thomas. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Jonathan Stone * and Jason R. Thorpe for the NetBSD Project. * 4. The names of the authors may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _NET_IF_MEDIA_H_ #define _NET_IF_MEDIA_H_ #include /* * Prototypes and definitions for BSD/OS-compatible network interface * media selection. * * Where it is safe to do so, this code strays slightly from the BSD/OS * design. Software which uses the API (device drivers, basically) * shouldn't notice any difference. * * Many thanks to Matt Thomas for providing the information necessary * to implement this interface. */ /* * if_media Options word: * Bits Use * ---- ------- * 0-4 Media subtype * 5-7 Media type * 8-15 Type specific options * 16-19 RFU * 20-27 Shared (global) options * 28-31 Instance */ /* * Ethernet */ #define IFM_ETHER 0x00000020 #define IFM_10_T 3 /* 10BaseT - RJ45 */ #define IFM_10_2 4 /* 10Base2 - Thinnet */ #define IFM_10_5 5 /* 10Base5 - AUI */ #define IFM_100_TX 6 /* 100BaseTX - RJ45 */ #define IFM_100_FX 7 /* 100BaseFX - Fiber */ #define IFM_100_T4 8 /* 100BaseT4 - 4 pair cat 3 */ #define IFM_100_VG 9 /* 100VG-AnyLAN */ #define IFM_100_T2 10 /* 100BaseT2 */ #define IFM_1000_SX 11 /* 1000BaseSX - multi-mode fiber */ #define IFM_10_STP 12 /* 10BaseT over shielded TP */ #define IFM_10_FL 13 /* 10baseFL - Fiber */ #define IFM_1000_LX 14 /* 1000baseLX - single-mode fiber */ #define IFM_1000_CX 15 /* 1000baseCX - 150ohm STP */ #define IFM_1000_T 16 /* 1000baseT - 4 pair cat 5 */ #define IFM_HPNA_1 17 /* HomePNA 1.0 (1Mb/s) */ #define IFM_10G_SR 18 /* 10GbaseSR - multi-mode fiber */ #define IFM_10G_LR 19 /* 10GbaseLR - single-mode fiber */ #define IFM_10G_CX4 20 /* 10GbaseCX4 - copper */ #define IFM_10G_T 21 /* 10GbaseT - 4 pair cat 6 */ #define IFM_2500_T 22 /* 2500baseT - 4 pair cat 5 */ #define IFM_5000_T 23 /* 5000baseT - 4 pair cat 5 */ /* * Token ring */ #define IFM_TOKEN 0x00000040 #define IFM_TOK_STP4 3 /* Shielded twisted pair 4m - DB9 */ #define IFM_TOK_STP16 4 /* Shielded twisted pair 16m - DB9 */ #define IFM_TOK_UTP4 5 /* Unshielded twisted pair 4m - RJ45 */ #define IFM_TOK_UTP16 6 /* Unshielded twisted pair 16m - RJ45 */ #define IFM_TOK_STP100 7 /* Shielded twisted pair 100m - DB9 */ #define IFM_TOK_UTP100 8 /* Unshielded twisted pair 100m - RJ45 */ #define IFM_TOK_ETR 0x00000200 /* Early token release */ #define IFM_TOK_SRCRT 0x00000400 /* Enable source routing features */ #define IFM_TOK_ALLR 0x00000800 /* All routes / Single route bcast */ #define IFM_TOK_DTR 0x00002000 /* Dedicated token ring */ #define IFM_TOK_CLASSIC 0x00004000 /* Classic token ring */ #define IFM_TOK_AUTO 0x00008000 /* Automatic Dedicate/Classic token ring */ /* * FDDI */ #define IFM_FDDI 0x00000060 #define IFM_FDDI_SMF 3 /* Single-mode fiber */ #define IFM_FDDI_MMF 4 /* Multi-mode fiber */ #define IFM_FDDI_UTP 5 /* CDDI / UTP */ #define IFM_FDDI_DA 0x00000100 /* Dual attach / single attach */ /* * IEEE 802.11 Wireless */ #define IFM_IEEE80211 0x00000080 #define IFM_IEEE80211_FH1 3 /* Frequency Hopping 1Mbps */ #define IFM_IEEE80211_FH2 4 /* Frequency Hopping 2Mbps */ #define IFM_IEEE80211_DS2 5 /* Direct Sequence 2Mbps */ #define IFM_IEEE80211_DS5 6 /* Direct Sequence 5Mbps*/ #define IFM_IEEE80211_DS11 7 /* Direct Sequence 11Mbps*/ #define IFM_IEEE80211_DS1 8 /* Direct Sequence 1Mbps */ #define IFM_IEEE80211_DS22 9 /* Direct Sequence 22Mbps */ #define IFM_IEEE80211_ADHOC 0x00000100 /* Operate in Adhoc mode */ /* * Shared media sub-types */ #define IFM_AUTO 0 /* Autoselect best media */ #define IFM_MANUAL 1 /* Jumper/dipswitch selects media */ #define IFM_NONE 2 /* Deselect all media */ /* * Shared options */ #define IFM_FDX 0x00100000 /* Force full duplex */ #define IFM_HDX 0x00200000 /* Force half duplex */ #define IFM_FLOW 0x00400000 /* enable hardware flow control */ #define IFM_EEE 0x00800000 /* Support energy efficient ethernet */ #define IFM_FLAG0 0x01000000 /* Driver defined flag */ #define IFM_FLAG1 0x02000000 /* Driver defined flag */ #define IFM_FLAG2 0x04000000 /* Driver defined flag */ #define IFM_LOOP 0x08000000 /* Put hardware in loopback */ /* * Masks */ #define IFM_NMASK 0x000000e0 /* Network type */ #define IFM_TMASK 0x0000001f /* Media sub-type */ #define IFM_IMASK 0xf0000000 /* Instance */ #define IFM_ISHIFT 28 /* Instance shift */ #define IFM_OMASK 0x0000ff00 /* Type specific options */ #define IFM_GMASK 0x0ff00000 /* Global options */ /* * Status bits */ #define IFM_AVALID 0x00000001 /* Active bit valid */ #define IFM_ACTIVE 0x00000002 /* Interface attached to working net */ #define IFM_WAKESAMENET 0x00000004 /* No link transition while asleep */ /* * Macros to extract various bits of information from the media word. */ #define IFM_TYPE(x) ((x) & IFM_NMASK) #define IFM_SUBTYPE(x) ((x) & IFM_TMASK) #define IFM_TYPE_OPTIONS(x) ((x) & IFM_OMASK) #define IFM_INST(x) (((x) & IFM_IMASK) >> IFM_ISHIFT) #define IFM_OPTIONS(x) ((x) & (IFM_OMASK|IFM_GMASK)) #define IFM_INST_MAX IFM_INST(IFM_IMASK) /* * Macro to create a media word. */ #define IFM_MAKEWORD(type, subtype, options, instance) \ ((type) | (subtype) | (options) | ((instance) << IFM_ISHIFT)) /* * NetBSD extension not defined in the BSDI API. This is used in various * places to get the canonical description for a given type/subtype. * * NOTE: all but the top-level type descriptions must contain NO whitespace! * Otherwise, parsing these in ifconfig(8) would be a nightmare. */ struct ifmedia_description { int ifmt_word; /* word value; may be masked */ const char *ifmt_string; /* description */ }; #define IFM_TYPE_DESCRIPTIONS { \ { IFM_ETHER, "Ethernet" }, \ { IFM_TOKEN, "Token ring" }, \ { IFM_FDDI, "FDDI" }, \ { IFM_IEEE80211, "IEEE802.11" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_ETHERNET_DESCRIPTIONS { \ { IFM_10_T, "10baseT/UTP" }, \ { IFM_10_2, "10base2/BNC" }, \ { IFM_10_5, "10base5/AUI" }, \ { IFM_100_TX, "100baseTX" }, \ { IFM_100_FX, "100baseFX" }, \ { IFM_100_T4, "100baseT4" }, \ { IFM_100_VG, "100baseVG" }, \ { IFM_100_T2, "100baseT2" }, \ { IFM_1000_SX, "1000baseSX" }, \ { IFM_10_STP, "10baseSTP" }, \ { IFM_10_FL, "10baseFL" }, \ { IFM_1000_LX, "1000baseLX" }, \ { IFM_1000_CX, "1000baseCX" }, \ { IFM_1000_T, "1000baseT" }, \ { IFM_HPNA_1, "HomePNA1" }, \ { IFM_10G_SR, "10GbaseSR" }, \ { IFM_10G_LR, "10GbaseLR" }, \ { IFM_10G_CX4, "10GbaseCX4" }, \ { IFM_10G_T, "10GbaseT" }, \ { IFM_2500_T, "2500baseT" }, \ { IFM_5000_T, "5000baseT" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_ETHERNET_ALIASES { \ { IFM_10_T, "UTP" }, \ { IFM_10_T, "10UTP" }, \ { IFM_10_2, "BNC" }, \ { IFM_10_2, "10BNC" }, \ { IFM_10_5, "AUI" }, \ { IFM_10_5, "10AUI" }, \ { IFM_100_TX, "100TX" }, \ { IFM_100_FX, "100FX" }, \ { IFM_100_T4, "100T4" }, \ { IFM_100_VG, "100VG" }, \ { IFM_100_T2, "100T2" }, \ { IFM_1000_SX, "1000SX" }, \ { IFM_10_STP, "STP" }, \ { IFM_10_STP, "10STP" }, \ { IFM_10_FL, "FL" }, \ { IFM_10_FL, "10FL" }, \ { IFM_1000_LX, "1000LX" }, \ { IFM_1000_CX, "1000CX" }, \ { IFM_1000_T, "1000T" }, \ { IFM_HPNA_1, "HPNA1" }, \ { IFM_10G_SR, "10GSR" }, \ { IFM_10G_LR, "10GLR" }, \ { IFM_10G_CX4, "10GCX4" }, \ { IFM_10G_T, "10GT" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS { \ { 0, NULL }, \ } #define IFM_SUBTYPE_TOKENRING_DESCRIPTIONS { \ { IFM_TOK_STP4, "DB9/4Mbit" }, \ { IFM_TOK_STP16, "DB9/16Mbit" }, \ { IFM_TOK_UTP4, "UTP/4Mbit" }, \ { IFM_TOK_UTP16, "UTP/16Mbit" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_TOKENRING_ALIASES { \ { IFM_TOK_STP4, "4STP" }, \ { IFM_TOK_STP16, "16STP" }, \ { IFM_TOK_UTP4, "4UTP" }, \ { IFM_TOK_UTP16, "16UTP" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_TOKENRING_OPTION_DESCRIPTIONS { \ { IFM_TOK_ETR, "EarlyTokenRelease" }, \ { IFM_TOK_SRCRT, "SourceRouting" }, \ { IFM_TOK_ALLR, "AllRoutes" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_FDDI_DESCRIPTIONS { \ { IFM_FDDI_SMF, "Single-mode" }, \ { IFM_FDDI_MMF, "Multi-mode" }, \ { IFM_FDDI_UTP, "UTP" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_FDDI_ALIASES { \ { IFM_FDDI_SMF, "SMF" }, \ { IFM_FDDI_MMF, "MMF" }, \ { IFM_FDDI_UTP, "CDDI" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_FDDI_OPTION_DESCRIPTIONS { \ { IFM_FDDI_DA, "Dual-attach" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_IEEE80211_DESCRIPTIONS { \ { IFM_IEEE80211_FH1, "FH1" }, \ { IFM_IEEE80211_FH2, "FH2" }, \ { IFM_IEEE80211_DS1, "DS1" }, \ { IFM_IEEE80211_DS2, "DS2" }, \ { IFM_IEEE80211_DS5, "DS5" }, \ { IFM_IEEE80211_DS11, "DS11" }, \ { IFM_IEEE80211_DS22, "DS22" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_IEEE80211_OPTION_DESCRIPTIONS { \ { IFM_IEEE80211_ADHOC, "adhoc" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_SHARED_DESCRIPTIONS { \ { IFM_AUTO, "autoselect" }, \ { IFM_MANUAL, "manual" }, \ { IFM_NONE, "none" }, \ { 0, NULL }, \ } #define IFM_SUBTYPE_SHARED_ALIASES { \ { IFM_AUTO, "auto" }, \ { 0, NULL }, \ } #define IFM_SHARED_OPTION_DESCRIPTIONS { \ { IFM_FDX, "full-duplex" }, \ { IFM_HDX, "half-duplex" }, \ { IFM_FLOW, "flow-control" }, \ { IFM_EEE, "energy-efficient-ethernet" }, \ { IFM_FLAG0, "flag0" }, \ { IFM_FLAG1, "flag1" }, \ { IFM_FLAG2, "flag2" }, \ { IFM_LOOP, "hw-loopback" }, \ { 0, NULL }, \ } #endif /* _NET_IF_MEDIA_H_ */