feat(astf): Support framesizes for ASTF

- No support for IMIX.
+ Fix a bad bug in padding (most ASTF profiles had wrong frame sizes).
+ Fix a big typo in TCP PPS profiles (s->c was not data, just RST).
+ Control transaction size via ASTF_N_DATA_FRAMES env variable.
 - Default value 5 leads to transactions smaller than before.
 + It ensures transaction is one burst (per direction) even for jumbo.
+ Edit autogen to set supported frame sizes based on suite id.
 + Both TCP and UDP use the same values:
  + 64B for CPS (exact for UDP, nominal for TCP).
  + 100B, 1518B and 9000B for TPUT and PPS.
   - TCP TPUT achievable minimum is 70B.
   + Used 100B to leave room for possible IPv6 ASTF tests.
 + Separate function for code reused by vpp and trex tests.
 - I do not really like the new "copy and edit" approach added here.
  + But it is a quick edit, better autogen refactor is low priority.
+ Consider both established and transitory sessions as valid.
 - Mostly for compatibility with 2202 behavior and to avoid ramp-ups.
 - Assuming both session states have similar enough VPP CPU overhead.
 + Added a TODO to investigate and maybe reconsider later.
+ Update the state timeout value to 240s.
 + That is the default for TCP (for transitory state).
 - UDP could keep using 300s.
  + But I prefer UDP and TCP to behave as similarly as possible.
+ Use TRex tunables to get the exact frame size (for data packets).
 - It is not clear why the recipe for MSS has to be this complicated.
 + Move code away from profile init, as frame size is not known there.
 + Change internal profile API, so values related to MSS are passed.
+ Lower ramp-up rate for TCP TPUT tests.
 + Because without lower rate, jumbo fails on packet loss in ramp-up.
 + UDP TPUT ramp-up rate also lowered (just to keep suites more similar).
+ Distinguish one-direction and aggregated average frame size.
 + Update keyword documentation where the distiction matters.
 + One-direction is needed for turning bandwidth limit to TPS limit.
 + Aggregated is needed for correct NDRPDR bandwidth result value.
 - TCP TPUT will always be few percent below bidirectional maximum.
  + That is unavoidable, as one direction sends more control packets.
+ Add runtime consistency checks so future refactors are safer.
 + Fail if padding requested would be negative.
 + Fail if suite claims unexpected values for packets per transaction.
+ Edit the 4 types of ASTF profiles to keep them similar to each other.
 + Move UDP TPUT limit value from a field back to direct argument.
 + Stop pretending first UDP packet is not data.
+ Apply small improvements where convenient.
 + Replace "aggregate" with "aggregated" where possible.
  + To lower probability of any future typos in variable names.
 + Avoid calling Set Numeric Frame Sizes twice.
 + Code formatting, keyword documentation, code comments, ...
 + Add TODOs for less important code quality improvements.
- Postpone updating of methodology pages to a subsequent change.

Change-Id: I4b381e5210e69669f972326202fdcc5a2c9c923b
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 27 insertions, 31 deletions

diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py
index 327cc36e01..f1ee9125f2 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -49,26 +49,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.255.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.255.255"
-
-        # UDP messages
-        self.udp_req = u"GET"
-        self.udp_res = u"ACK"
-
-        # Headers length
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B udp
-
-        # No need to set keepalive, both programs end just after start&send.
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -78,13 +58,29 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates ASTFProfile().
         :rtype: tuple
         """
-        self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
-        self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.255.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.255.255"
+
+        # Headers length
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # UDP messages, not padded yet.
+        udp_req = u"GET"
+        udp_res = u"ACK"
+
+        # Padd to the required frame size.
+        udp_req += self._gen_padding(headers_size + len(udp_req))
+        udp_res += self._gen_padding(headers_size + len(udp_res))
+
+        # No need to set keepalive, both programs end just after start&send.
 
         # client commands
         prog_c = ASTFProgram(stream=False)
         # send REQ message
-        prog_c.send_msg(self.udp_req)
+        prog_c.send_msg(udp_req)
         # No need to process the response, seeing L2 counter is enough.
         # Client program can end here.
 
@@ -93,22 +89,22 @@ class TrafficProfile(TrafficProfileBaseClass):
         # When server instance is created means REQ is visible in L2 counter.
         # No need to receive explicitly?
         # send RES message
-        prog_s.send_msg(self.udp_res)
+        prog_s.send_msg(udp_res)
         # Server program can end here.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -119,7 +115,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=4128768,  # TODO: set via input parameter ?
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)