DMM: Remove

Change-Id: Ibbfbed79e473c804390802ae1ecd737b50c06aa3
Signed-off-by: Tibor Frank <tifrank@cisco.com>

4 files changed, 0 insertions, 530 deletions

diff --git a/resources/libraries/python/DMM/DMMConstants.py b/resources/libraries/python/DMM/DMMConstants.py
deleted file mode 100644
index c4899df84a..0000000000
--- a/resources/libraries/python/DMM/DMMConstants.py
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright (c) 2018 Huawei Technologies Co.,Ltd.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This file defines the constants variables for the DMM test."""
-
-class DMMConstants:
-    """Define the directory path for the DMM test."""
-
-    # DMM testing directory location at topology nodes
-    REMOTE_FW_DIR = '/tmp/DMM-testing'
-
-    # Shell scripts location
-    DMM_SCRIPTS = 'dmm/scripts/csit/'
-
-    # Run scripts location
-    DMM_RUN_SCRIPTS = 'dmm/scripts/csit/run'
-
-    # Libraries location
-    DMM_DEPLIBS = 'tests/dmm/dmm_deplibs'
-
-    # Config files location for the DMM test
-    DMM_TESTCONFIG = 'tests/dmm/dmm_testconfig'
diff --git a/resources/libraries/python/DMM/SetupDMMTest.py b/resources/libraries/python/DMM/SetupDMMTest.py
deleted file mode 100644
index d84cbd544f..0000000000
--- a/resources/libraries/python/DMM/SetupDMMTest.py
+++ /dev/null
@@ -1,184 +0,0 @@
-# Copyright (c) 2018 Huawei Technologies Co.,Ltd.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module exists to provide setup utilities for the framework on topology
-nodes. All tasks required to be run before the actual tests are started is
-supposed to end up here.
-"""
-
-from shlex import split
-from subprocess import Popen, PIPE
-from multiprocessing import Pool
-from tempfile import NamedTemporaryFile
-from os.path import basename
-
-from robot.api import logger
-from robot.libraries.BuiltIn import BuiltIn
-
-from resources.libraries.python.ssh import SSH
-from resources.libraries.python.DMM.DMMConstants import DMMConstants as con
-from resources.libraries.python.topology import NodeType, Topology
-from resources.libraries.python.TLDK.SetupTLDKTest import copy_tarball_to_node,\
-     delete_local_tarball
-
-__all__ = ["SetupDMMTest"]
-
-
-def pack_framework_dir():
-    """Pack the testing WS into temp file, return its name.
-    :returns: file_name
-    :rtype: str
-    :raises RuntimeError: If pack the testing framework failed.
-    """
-    tmpfile = NamedTemporaryFile(suffix=".tgz", prefix="DMM-testing-")
-    file_name = tmpfile.name
-    tmpfile.close()
-
-    proc = Popen(
-        split("tar --exclude-vcs --exclude=./tmp --exclude=dmm_depends.tar.gz"
-              " -zcf {0} .".format(file_name)), stdout=PIPE, stderr=PIPE)
-    (stdout, stderr) = proc.communicate()
-
-    logger.debug(stdout)
-    logger.debug(stderr)
-
-    return_code = proc.wait()
-    if return_code != 0:
-        raise RuntimeError("Could not pack testing framework.")
-
-    return file_name
-
-def extract_tarball_at_node(tarball, node):
-    """Extract tarball at given node.
-
-    Extracts tarball using tar on given node to specific CSIT location.
-    Raise runtime errors when failed.
-
-    :param tarball: Path to tarball to upload.
-    :param node: Dictionary created from topology.
-    :type tarball: str
-    :type node: dict
-    :return: nothing
-    :raises RuntimeError: If extract tarball failed.
-    """
-    logger.console('Extracting tarball to {0} on {1}'.format(
-        con.REMOTE_FW_DIR, node['host']))
-    ssh = SSH()
-    ssh.connect(node)
-
-    cmd = 'sudo rm -rf {1}; mkdir {1} ; tar -zxf {0} -C {1}; ' \
-          'rm -f {0};'.format(tarball, con.REMOTE_FW_DIR)
-    (ret_code, _, stderr) = ssh.exec_command(cmd, timeout=30)
-    if ret_code != 0:
-        logger.error('Unpack error: {0}'.format(stderr))
-        raise RuntimeError('Failed to unpack {0} at node {1}'.format(
-            tarball, node['host']))
-
-def install_dmm_test(node):
-    """Prepare the DMM test envrionment.
-    Raise errors when failed.
-
-    :param node: Dictionary created from topology.
-    :type node: dict
-    :returns: nothing.
-    :raises RuntimeError: If install dmm failed.
-    """
-
-    arch = Topology.get_node_arch(node)
-    logger.console('Install DMM on {0} ({1})'.format(node['host'], arch))
-
-    ssh = SSH()
-    ssh.connect(node)
-    (ret_code, _, stderr) = ssh.exec_command(
-        'cd {0}/{1} && ./install_prereq.sh {2} 2>&1 | tee '
-        'log_install_prereq.txt'
-        .format(con.REMOTE_FW_DIR, con.DMM_SCRIPTS, arch), timeout=600)
-
-    if ret_code != 0:
-        logger.error('Install DMM error: {0}'.format(stderr))
-        raise RuntimeError('Install prereq failed')
-    else:
-        logger.console('Install DMM on {0} success!'.format(node['host']))
-
-def setup_node(args):
-    """Run all set-up methods for a node.
-
-    This method is used as map_async parameter. It receives tuple with all
-    parameters as passed to map_async function.
-
-    :param args: All parameters needed to setup one node.
-    :type args: tuple
-    :returns: True - success, False - error
-    :rtype: bool
-    :raises RuntimeError: If node setup failed.
-    """
-    tarball, remote_tarball, node = args
-
-    # if unset, arch defaults to x86_64
-    Topology.get_node_arch(node)
-
-    try:
-        if node['type'] == NodeType.DUT:
-            copy_tarball_to_node(tarball, node)
-            extract_tarball_at_node(remote_tarball, node)
-            install_dmm_test(node)
-    except RuntimeError as exc:
-        logger.error("Node setup failed, error:'{0}'".format(exc.message))
-        return False
-    else:
-        logger.console('Setup of node {0} done'.format(node['host']))
-        return True
-
-class SetupDMMTest:
-    """Setup suite run on topology nodes.
-
-    Many VAT/CLI based tests need the scripts at remote hosts before executing
-    them. This class packs the whole testing directory and copies it over
-    to all nodes in topology under /tmp/
-    """
-
-    @staticmethod
-    def setup_dmm_test(nodes):
-        """Pack the whole directory and extract in temp on each node."""
-
-        tarball = pack_framework_dir()
-        msg = 'Framework packed to {0}'.format(tarball)
-        logger.console(msg)
-        logger.trace(msg)
-        remote_tarball = "/tmp/{0}".format(basename(tarball))
-
-        # Turn off logging since we use multiprocessing.
-        log_level = BuiltIn().set_log_level('NONE')
-        params = ((tarball, remote_tarball, node) for node in nodes.values())
-        pool = Pool(processes=len(nodes))
-        result = pool.map_async(setup_node, params)
-        pool.close()
-        pool.join()
-
-        # Turn on logging.
-        BuiltIn().set_log_level(log_level)
-
-        logger.info(
-            'Executed node setups in parallel, waiting for processes to end')
-        result.wait()
-
-        results = result.get()
-        node_setup_success = all(results)
-        logger.info('Results: {0}'.format(results))
-
-        logger.trace('Test framework copied to all topology nodes')
-        delete_local_tarball(tarball)
-        if node_setup_success:
-            logger.console('All nodes are ready')
-        else:
-            logger.console('Failed to setup dpdk on all the nodes')
diff --git a/resources/libraries/python/DMM/SingleCliSer.py b/resources/libraries/python/DMM/SingleCliSer.py
deleted file mode 100644
index aa77eaa445..0000000000
--- a/resources/libraries/python/DMM/SingleCliSer.py
+++ /dev/null
@@ -1,298 +0,0 @@
-# Copyright (c) 2018 Huawei Technologies Co.,Ltd.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-"""
-This module exists to provide single client-server test for DMM
-on topology nodes.
-"""
-import time
-import os
-import glob
-
-from resources.libraries.python.ssh import SSH
-from resources.libraries.python.ssh import exec_cmd, exec_cmd_no_error
-from resources.libraries.python.DMM.DMMConstants import DMMConstants as con
-from resources.libraries.python.topology import Topology
-
-class SingleCliSer:
-    """Test DMM with single client-server topology."""
-
-    @staticmethod
-    def set_dmm_interface_address(dut_node, ifname, ip_addr, ip4_prefix):
-        """
-        Flush ip, set ip, set interface up.
-
-        :param dut_node: Node to set the interface address on.
-        :param ifname: Interface name.
-        :param ip_addr: IP address to configure.
-        :param ip4_prefix: Prefix length.
-        :type dut_node: dict
-        :type ifname: str
-        :type ip_addr: str
-        :type ip4_prefix: int
-        """
-        cmd = 'sudo ip -4 addr flush dev {}'.format(ifname)
-        exec_cmd_no_error(dut_node, cmd)
-        cmd = 'sudo ip addr add {}/{} dev {}'\
-            .format(ip_addr, ip4_prefix, ifname)
-        exec_cmd_no_error(dut_node, cmd)
-        cmd = 'sudo ip link set {0} up'.format(ifname)
-        exec_cmd_no_error(dut_node, cmd)
-
-    @staticmethod
-    def setup_dmm_dut(dut1_node, dut2_node, dut1_if_name, dut2_if_name,
-                      script_name, dut1_ip, dut2_ip, prefix_len):
-        """
-        Setup DMM on DUT nodes.
-
-        :param dut1_node: Node to setup DMM on.
-        :param dut2_node: Node to setup DMM on.
-        :param dut1_if_name: DUT1 to DUT2 interface name.
-        :param dut2_if_name: DUT2 to DUT1 interface name.
-        :param script_name: Name of the script to run.
-        :param dut1_ip: IP address to configure on DUT1.
-        :param dut2_ip: IP address to configure on DUT2.
-        :param prefix_len: Prefix length.
-        :type dut1_node: dict
-        :type dut2_node: dict
-        :type dut1_if_name: str
-        :type dut2_if_name: str
-        :type script_name: str
-        :type dut1_ip: str
-        :type dut2_ip: str
-        :type prefix_len: int
-        """
-        SingleCliSer.set_dmm_interface_address(dut1_node, dut1_if_name,
-                                               dut1_ip, prefix_len)
-        SingleCliSer.set_dmm_interface_address(dut2_node, dut2_if_name,
-                                               dut2_ip, prefix_len)
-        cmd = 'cd {0}/{1} && ./{2} setup 0 {3} {4} {5}'\
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name,
-                    dut1_if_name, dut1_ip, dut2_ip)
-        exec_cmd(dut1_node, cmd)
-
-        cmd = 'cd {0}/{1} && ./{2} setup 1 {3} {4} {5}'\
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name,
-                    dut2_if_name, dut1_ip, dut2_ip)
-        exec_cmd(dut2_node, cmd)
-
-    @staticmethod
-    def execute_test(dut1_node, dut2_node, dut1_if_name, dut2_if_name,
-                     script_name, dut1_ip, dut2_ip):
-        """
-        Run the given test case.
-
-        :param dut1_node: Node to run an app with DMM on.
-        :param dut2_node: Node to run an app with DMM on.
-        :param dut1_if_name: DUT1 to DUT2 interface name.
-        :param dut2_if_name: DUT2 to DUT1 interface name.
-        :param script_name: Name of the script to run.
-        :param dut1_ip: DUT1 IP address.
-        :param dut2_ip: DUT2 IP address.
-        :type dut1_node: dict
-        :type dut2_node: dict
-        :type dut1_if_name: str
-        :type dut2_if_name: str
-        :type script_name: str
-        :type dut1_ip: str
-        :type dut2_ip: str
-        """
-        cmd = 'cd {0}/{1} && ./{2} run 0 {3} {4} {5} ' \
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name,
-                    dut1_if_name, dut1_ip, dut2_ip)
-        cmd += '2>&1 | tee log_{0}.txt &'.format(script_name)
-        exec_cmd(dut1_node, cmd)
-        time.sleep(10)
-
-        cmd = 'cd {0}/{1} && ./{2} run 1 {3} {4} {5} ' \
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name,
-                    dut2_if_name, dut1_ip, dut2_ip)
-        cmd += '2>&1 | tee log_{0}.txt'.format(script_name)
-        exec_cmd(dut2_node, cmd)
-
-    @staticmethod
-    def verify_test_result(dut1_node, dut2_node, script_name):
-        """
-        Verify the test and return result.
-
-        :param dut1_node: Node to verify test result on.
-        :param dut2_node: Node to verify test result on.
-        :param script_name: Name of the script to run.
-        :type dut1_node: dict
-        :type dut2_node: dict
-        :type script_name: str
-        :returns: test result PASS/FAIL.
-        :rtype: str
-        """
-        cmd = 'cd {0}/{1} && ./{2} verify 0' \
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name)
-        (_, stdout_ser, _) = exec_cmd(dut1_node, cmd)
-
-        cmd = 'cd {0}/{1} && ./{2} verify 1' \
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name)
-        (_, stdout_cli, _) = exec_cmd(dut2_node, cmd)
-
-        if stdout_ser.find('DMM_CSIT_TEST_PASSED') != -1 \
-                and stdout_cli.find('DMM_CSIT_TEST_PASSED') != -1:
-            return "PASS"
-        else:
-            return "FAIL"
-
-    @staticmethod
-    def print_dmm_log(dut1_node, dut2_node, script_name):
-        """
-        Print DMM logs.
-
-        :param dut1_node: Node to print DMM logs of.
-        :param dut2_node: Node to print DMM logs of.
-        :param script_name: Name of the script to run.
-        :type dut1_node: dict
-        :type dut2_node: dict
-        :type script_name: str
-        """
-        cmd = 'cd {0}/{1} && ./{2} log 0'\
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name)
-        exec_cmd(dut1_node, cmd)
-
-        cmd = 'cd {0}/{1} && ./{2} log 1'\
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name)
-        exec_cmd(dut2_node, cmd)
-        cmd = 'mv /var/log/nStack/running.log /var/log/nStack/{0}_ser.log'\
-            .format(script_name)
-        exec_cmd(dut1_node, cmd, sudo=True)
-        cmd = 'mv /var/log/nStack/running.log /var/log/nStack/{0}_cli.log'\
-            .format(script_name)
-        exec_cmd(dut2_node, cmd, sudo=True)
-
-    @staticmethod
-    def cleanup_dmm_dut(dut1_node, dut2_node, script_name):
-        """
-        Cleanup DMM DUT node.
-
-        :param dut1_node: DMM node to be cleaned up.
-        :param dut2_node: DMM node to be cleaned up.
-        :param script_name: Name of the script to run.
-        :type dut1_node: dict
-        :type dut2_node: dict
-        :type script_name: str
-        """
-        cmd = 'cd {0}/{1} && ./{2} cleanup 0'\
-            .format(con.REMOTE_FW_DIR, con.DMM_RUN_SCRIPTS, script_name)
-        exec_cmd(dut1_node, cmd)
-        exec_cmd(dut2_node, cmd)
-        time.sleep(5)
-
-    @staticmethod
-    def run_dmm_func_test_cases(dut1_node, dut2_node, dut1_if_name,
-                                dut2_if_name, dut1_ip, dut2_ip, prefix_len):
-        """
-        Execute all the functional test cases and return result.
-
-        :param dut1_node: Node to run an app with DMM on.
-        :param dut2_node: Node to run an app with DMM on.
-        :param dut1_if_name: DUT1 to DUT2 interface name.
-        :param dut2_if_name: DUT2 to DUT1 interface name.
-        :param dut1_ip: IP address to configure on DUT1.
-        :param dut2_ip: IP address to configure on DUT2.
-        :param prefix_len: Prefix length.
-        :type dut1_node: dict
-        :type dut2_node: dict
-        :type dut1_if_name: str
-        :type dut2_if_name: str
-        :type dut1_ip: str
-        :type dut2_ip: str
-        :type prefix_len: int
-        :returns: Total testcase count, Passed testcase count.
-        :rtype: tuple(int, int)
-        """
-        passed = 0
-        total = 0
-        failed = 0
-        path = '{0}/*'.format(con.DMM_RUN_SCRIPTS)
-        files = [os.path.basename(x) for x in glob.glob(path)]
-        print "list of files : {0}".format(files)
-
-        for name in files:
-            print("file name : {}").format(name)
-            total += 1
-            SingleCliSer.setup_dmm_dut(dut1_node, dut2_node, dut1_if_name,
-                                       dut2_if_name, name, dut1_ip, dut2_ip,
-                                       prefix_len)
-            SingleCliSer.execute_test(dut1_node, dut2_node, dut1_if_name,
-                                      dut2_if_name, name, dut1_ip, dut2_ip)
-            result = SingleCliSer.verify_test_result(dut1_node, dut2_node,
-                                                     '{0}'.format(name))
-            if result == "PASS":
-                passed += 1
-            elif result == "FAIL":
-                failed += 1
-
-            SingleCliSer.print_dmm_log(dut1_node, dut2_node, name)
-            SingleCliSer.cleanup_dmm_dut(dut1_node, dut2_node, name)
-            print("TOTAL :{} PASSED : {} FAILED: {}").format\
-                (total, passed, failed)
-
-        return total, passed
-
-    @staticmethod
-    def dmm_get_interface_name(dut_node, dut_interface):
-        """
-        Get the interface name.
-
-        :param dut_node: Node to get the interface name on.
-        :param dut_interface: Interface key.
-        :type dut_node: dict
-        :type dut_interface: str
-        :returns: Interface name.
-        :rtype: str
-        """
-        mac = Topology.get_interface_mac(dut_node, dut_interface)
-        cmd = 'ifconfig -a | grep {0}'.format(mac)
-        (stdout, _) = exec_cmd_no_error(dut_node, cmd)
-        interface_name = stdout.split(' ', 1)[0]
-        return interface_name
-
-    @staticmethod
-    def get_logs_from_node(dut_node):
-        """
-        Get logs from node to the test executor machine.
-
-        :param dut_node: Node to artifact the logs of.
-        :type dut_node: dict
-        """
-        ssh = SSH()
-        ssh.connect(dut_node)
-        ssh.scp(".", '/var/log/nStack/*.log',
-                get=True, timeout=60, wildcard=True)
-
-        (ret, _, _) = exec_cmd(dut_node, 'ls -l /var/log/app*.log')
-        if ret == 0:
-            ssh.scp(".", '/var/log/app*.log',
-                    get=True, timeout=60, wildcard=True)
-
-        exec_cmd(dut_node, 'rm -rf /var/log/nStack/*.log', sudo=True)
-        exec_cmd(dut_node, 'rm -rf /var/log/app*.log', sudo=True)
-
-    @staticmethod
-    def archive_dmm_logs(dut1_node, dut2_node):
-        """
-        Get logs from both DUT's to the test executor machine.
-
-        :param dut1_node: DUT1 node.
-        :param dut2_node: DUT2 node.
-        :type dut1_node: dict
-        :type dut2_node: dict
-        """
-        SingleCliSer.get_logs_from_node(dut1_node)
-        SingleCliSer.get_logs_from_node(dut2_node)
diff --git a/resources/libraries/python/DMM/__init__.py b/resources/libraries/python/DMM/__init__.py
deleted file mode 100644
index d7abcb27b1..0000000000
--- a/resources/libraries/python/DMM/__init__.py
+++ /dev/null
@@ -1,16 +0,0 @@
-# Copyright (c) 2018 Huawei Technologies Co.,Ltd.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""
-__init__ file for directory resources/libraries/python/DMM
-"""