aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/honeycomb/sub_interface.robot
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2019-11-11 16:14:32 +0000
committerPeter Mikus <pmikus@cisco.com>2019-11-19 06:43:59 +0000
commite7ad66f3147662973039caaac33015de7e0c6f8c (patch)
tree809a056325425bad672a8a9274c3c2d696a35030 /resources/libraries/robot/honeycomb/sub_interface.robot
parent20cc67d5f23a7f4e05b08012bf3d3a63be4bcf63 (diff)
HONEYCOMB: Remove
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e
Diffstat (limited to 'resources/libraries/robot/honeycomb/sub_interface.robot')
-rw-r--r--resources/libraries/robot/honeycomb/sub_interface.robot670
1 files changed, 0 insertions, 670 deletions
diff --git a/resources/libraries/robot/honeycomb/sub_interface.robot b/resources/libraries/robot/honeycomb/sub_interface.robot
deleted file mode 100644
index 8bb95f51b8..0000000000
--- a/resources/libraries/robot/honeycomb/sub_interface.robot
+++ /dev/null
@@ -1,670 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.L2Util
-| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Documentation | Keywords used to manipulate sub-interfaces.
-
-*** Keywords ***
-| Honeycomb creates sub-interface
-| | [Documentation] | Create a sub-interface using Honeycomb API.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface where a sub-interface will be\
-| | ... | created. Type: string
-| | ... | - match - Match type. Type: string
-| | ... | - tags - List of tags to be set while creating the sub-interface.\
-| | ... | Type: list
-| | ... | - sub_interface_settings - Sub-inteface parameters to be set while\
-| | ... | creating the sub-interface. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb creates sub-interface\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0\
-| | ... | \| vlan-tagged-exact-match \| ${sub_if_1_tags}\
-| | ... | \| ${sub_if_1_settings} \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface}
-| | ... | ${match} | ${tags} | ${sub_interface_settings}
-| | ...
-| | Honeycomb Create sub interface | ${node} | ${super_interface}
-| | ... | ${match} | ${tags} | &{sub_interface_settings}
-
-| Sub-interface Operational Data From Honeycomb Should Be
-| | [Documentation] | Retrieves sub-interface configuration through Honeycomb\
-| | ... | and compares it with settings supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - sub_if_settings - Operational data for sub-interface to be checked.\
-| | ... | Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Sub-interface Operational Data From Honeycomb Should Be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\
-| | ... | \| ${sub_if_1_params} \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ... | ${sub_if_settings}
-| | ...
-| | ${api_data}= | Get sub interface oper data
-| | ... | ${node} | ${super_interface} | ${identifier}
-| | Compare Data Structures | ${api_data} | ${sub_if_settings}
-
-| Sub-interface Operational Data From Honeycomb Should Be empty
-| | [Documentation] | Retrieves sub-interface configuration through Honeycomb \
-| | ... | and expects no data.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Sub-interface Operational Data From Honeycomb Should Be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ...
-| | Run keyword and expect error | *KeyError: 'vpp-vlan:sub-interfaces'*
-| | ... | Get sub interface oper data
-| | ... | ${node} | ${super_interface} | ${identifier}
-
-| Sub-interface state from Honeycomb should be
-| | [Documentation] | Retrieves sub-interface configuration through Honeycomb \
-| | ... | and checks the administrative and operational state.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - admin_state - Required administrative state - up or down. \
-| | ... | Type: string
-| | ... | - oper_state - Required operational state - up or down. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Sub-interface state from Honeycomb should be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| up \| up \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ... | ${admin_state} | ${oper_state}
-| | ...
-| | ${api_data}= | Get sub interface oper data
-| | ... | ${node} | ${super_interface} | ${identifier}
-| | Should be equal | ${api_data['admin-status']} | ${admin_state}
-| | Should be equal | ${api_data['oper-status']} | ${oper_state}
-
-| Sub-interface Operational Data From VAT Should Be
-| | [Documentation] | Retrieves sub-interface configuration through VAT and\
-| | ... | compares it with settings supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - sub_interface - Name of an sub-interface on the specified node.\
-| | ... | Type: string
-| | ... | - sub_interface_settings - Operational data specific for a\
-| | ... | sub-interface to be checked. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Sub-interface Operational Data From VAT Should Be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${sub_if_1_params} \|
-| | ...
-| | [Arguments] | ${node} | ${sub_interface} | ${sub_interface_settings}
-| | ...
-| | ${vat_data}= | VPP get interface data
-| | ... | ${node} | ${sub_interface}
-| | Should be equal as strings | ${vat_data['sub_id']}
-| | ... | ${sub_interface_settings['identifier']}
-| | Should be equal as strings
-| | ... | ${vat_data['interface_name']} | ${sub_interface}
-| | Run keyword if | ${vat_data['link_up_down']} == 0
-| | ... | Should be equal as strings
-| | ... | ${sub_interface_settings['oper-status']} | down
-| | Run keyword if | ${vat_data['link_up_down']} == 1
-| | ... | Should be equal as strings
-| | ... | ${sub_interface_settings['oper-status']} | up
-
-| Sub-interface state from VAT should be
-| | [Documentation] | Retrieves sub-interface configuration through VAT and \
-| | ... | checks the administrative and operational state.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - sub_interface - Name of an sub-interface on the specified node. \
-| | ... | Type: string
-| | ... | - admin_state - Required administrative state - up or down. \
-| | ... | Type: string
-| | ... | - oper_state - Required operational state - up or down. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Sub-interface state from VAT should be \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| up \| up \|
-| | ...
-| | [Arguments] | ${node} | ${sub_interface} | ${admin_state} | ${oper_state}
-| | ...
-| | ${vat_data}= | VPP get interface data
-| | ... | ${node} | ${sub_interface}
-| | Run keyword if | '${admin_state}' == 'down'
-| | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 0
-| | Run keyword if | '${admin_state}' == 'up'
-| | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 1
-| | Run keyword if | '${oper_state}' == 'down'
-| | ... | Should be equal as strings | ${vat_data['link_up_down']} | 0
-| | Run keyword if | '${oper_state}' == 'up'
-| | ... | Should be equal as strings | ${vat_data['link_up_down']} | 1
-
-| Sub-interface indices from Honeycomb and VAT should correspond
-| | [Documentation] | Uses VAT and Honeycomb to get operational data about the\
-| | ... | given sub-interface and compares the interface indexes. The
-| | ... | sub-interface index from Honeycomb should be greater than index from
-| | ... | VAT by one.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Sub-interface indices from Honeycomb and VAT should correspond \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ...
-| | ${api_data}= | Get sub interface oper data
-| | ... | ${node} | ${super_interface} | ${identifier}
-| | ${vat_data}= | VPP get interface data
-| | ... | ${node} | ${super_interface}.${identifier}
-| | ${sw_if_index}= | EVALUATE | ${vat_data['sw_if_index']} + 1
-| | Should be equal as strings
-| | ... | ${api_data['if-index']} | ${sw_if_index}
-
-| Honeycomb sets the sub-interface up
-| | [Documentation] | Honeycomb sets the sub-interface up.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | Honeycomb sets the sub-interface up\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ...
-| | Set sub interface state
-| | ... | ${node} | ${super_interface} | ${identifier} | up
-
-| Honeycomb sets the sub-interface down
-| | [Documentation] | Honeycomb sets the sub-interface down.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | Honeycomb sets the sub-interface down\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ...
-| | Set sub interface state
-| | ... | ${node} | ${super_interface} | ${identifier} | down
-
-| Honeycomb fails to set sub-interface up
-| | [Documentation] | Honeycomb tries to set sub-interface up and expects error.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_interface - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb fails to set sub-interface up\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_interface} | ${identifier}
-| | ...
-| | Run keyword and expect error | *HoneycombError: * was not successful. * 500.
-| | ... | Set sub interface state
-| | ... | ${node} | ${super_interface} | ${identifier} | up
-
-| Honeycomb adds sub-interface to bridge domain
-| | [Documentation] | Honeycomb adds the given sub-interface to bridge domain.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - sub_bd_setings - Bridge domain parameters to be set while adding\
-| | ... | the sub-interface to the bridge domain. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb adds sub-interface to bridge domain\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| ${bd_settings} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${sub_bd_setings}
-| | ...
-| | Add bridge domain to sub interface
-| | ... | ${node} | ${super_if} | ${identifier} | ${sub_bd_setings}
-
-| Sub-interface bridge domain Operational Data From Honeycomb Should Be
-| | [Documentation] | Uses Honeycomb API to verify sub-interface assignment to\
-| | ... | a bridge domain.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - settings - Bridge domain parameters to be checked. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Sub-interface bridge domain Operational Data From Honeycomb Should Be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| ${bd_settings} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings}
-| | ...
-| | ${if_data}= | Get BD data from sub interface
-| | ... | ${node} | ${super_if} | ${identifier}
-| | Should be equal | ${if_data['bridge-domain']}
-| | ... | ${settings['bridge-domain']}
-
-| Sub-interface bridge domain Operational Data From PAPI Should Be
-| | [Documentation] | Uses VAT to verify sub-interface assignment to a bridge\
-| | ... | domain.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - interface - Name of a sub-interface on the specified node. Type:\
-| | ... | string
-| | ... | - setings - Parameters to be checked. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Sub-interface bridge domain Operational Data From PAPI Should Be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${sub_bd_setings} \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${settings}
-| | ...
-| | ${bd_data}= | VPP get bridge domain data | ${node}
-| | ${bd_intf}= | Set Variable | ${bd_data[0]}
-| | ${sw_if_data}= | Set Variable | ${bd_intf['sw_if_details'][0]}
-| | Should be equal as integers | ${bd_intf['flood']} | ${bd_settings['flood']}
-| | Should be equal as integers | ${bd_intf['forward']}
-| | ... | ${bd_settings['forward']}
-| | Should be equal as integers | ${bd_intf['learn']} | ${bd_settings['learn']}
-# interface[1] = sw_if_index, interface[2] = shg
-| | Should be equal as strings | ${sw_if_data[2]}
-| | ... | ${settings['split-horizon-group']}
-
-| Honeycomb fails to remove all sub-interfaces
-| | [Documentation] | Honeycomb tries to remove all sub-interfaces using\
-| | ... | Honeycomb API. This operation must fail.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb fails to remove all sub-interfaces\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node} | ${super_if}
-| | ...
-| | Run keyword and expect error | *HoneycombError:*not successful. * code: 500.
-| | ... | Remove all sub interfaces
-| | ... | ${node} | ${super_if}
-
-| Honeycomb configures tag rewrite
-| | [Documentation] | Honeycomb configures tag-rewrite
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - settings - tag-rewrite parameters. Type: dictionary.
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb configures tag rewrite\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\
-| | ... | \| ${tag_rewrite_push} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings}
-| | ...
-| | Configure tag rewrite
-| | ... | ${node} | ${super_if} | ${identifier} | ${settings}
-
-| Rewrite tag from Honeycomb should be empty
-| | [Documentation] | Checks if the tag-rewrite is empty or does not exist.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Rewrite tag from Honeycomb should be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier}
-| | ...
-| | Run keyword and expect error | *Hon*Error*oper*does not contain*tag-rewrite*
-| | ... | Get tag rewrite oper data
-| | ... | ${node} | ${super_if} | ${identifier}
-
-| Rewrite tag from Honeycomb should be
-| | [Documentation] | Checks if the operational data retrieved from Honeycomb\
-| | ... | are as expected.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - settings - tag-rewrite operational parameters to be checked.\
-| | ... | Type: dictionary.
-| | ...
-| | ... | *Example:*
-| | ... | \| Rewrite tag from Honeycomb should be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\
-| | ... | \| ${tag_rewrite_push_oper} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings}
-| | ${api_data}= | Get tag rewrite oper data
-| | ... | ${node} | ${super_if} | ${identifier}
-| | Compare Data Structures
-| | ... | ${api_data} | ${settings}
-
-| Rewrite tag from VAT should be
-| | [Documentation] | Retrieves sub-interface configuration through VAT and\
-| | ... | compares values of rewrite tag parameters with settings supplied in\
-| | ... | argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of a sub-interface on the specified node.\
-| | ... | Type: string
-| | ... | - rw_settings - Parameters to be set while setting the rewrite tag.\
-| | ... | Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Rewrite tag from VAT should be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${rw_params} \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${rw_settings}
-| | ${vat_data}= | VPP get interface data | ${node} | ${interface}
-| | Compare Data Structures | ${vat_data} | ${rw_settings}
-
-| Honeycomb fails to set wrong rewrite tag
-| | [Documentation] | Honeycomb tries to set wrong rewrite tag and expects\
-| | ... | an error.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - settings - tag-rewrite parameters. Type: dictionary.
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb fails to set wrong rewrite tag\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\
-| | ... | \| ${tag_rewrite_push_WRONG} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings}
-| | Run keyword and expect error | *HoneycombError: * was not successful. *00.
-| | ... | Configure tag rewrite
-| | ... | ${node} | ${super_if} | ${identifier} | ${settings}
-
-| Honeycomb sets sub-interface ipv4 address
-| | [Documentation] | Uses Honeycomb API to configure an ipv4 address on the\
-| | ... | spcified sub-interface. Replaces any existing ipv4 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - address - IPv4 address to set. Type: string
-| | ... | - prefix - IPv4 network prefix length to set. Type: integer
-| | ...
-| | ... | *Example:*
-| | ... | \| | Honeycomb sets sub-interface ipv4 address\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
-| | ... | \| 192.168.0.2 \| ${24} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
-| | Add ip address to sub_interface
-| | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv4
-
-| Sub-interface ipv4 address from Honeycomb should be
-| | [Documentation] | Uses Honeycomb API to verify ipv4 address configuration\
-| | ... | on the specified sub-interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - address - IPv4 address to expect. Type: string
-| | ... | - prefix - IPv4 network prefix length to expect. Type: integer
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface ipv4 address from Honeycomb should be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
-| | ... | \| 192.168.0.2 \| ${24} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
-| | ${if_data}= | Get sub interface oper data
-| | ... | ${node} | ${super_if} | ${identifier}
-| | Should be equal
-| | ... | ${if_data['ipv4']['address'][0]['ip']} | ${address}
-| | Should be equal
-| | ... | ${if_data['ipv4']['address'][0]['prefix-length']} | ${prefix}
-
-| Sub-interface ipv4 address from VAT should be
-| | [Documentation] | Uses VAT to verify ipv4 address configuration\
-| | ... | on the specified sub-interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - sub_interface - Name of an sub-interface on the specified node.\
-| | ... | Type: string
-| | ... | - address - IPv4 address to expect. Type: string
-| | ... | - prefix - IPv4 network prefix length to expect. Type: integer
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface ipv4 address from VAT should be\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
-| | ...
-| | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix}
-| | ${data}= | VPP get interface ip addresses
-| | ... | ${node} | ${sub_interface} | ipv4
-| | Should be equal | ${data[0]['ip']} | ${address}
-| | Should be equal | ${data[0]['prefix_length']} | ${prefix}
-
-| Honeycomb removes all sub-interface ipv4 addresses
-| | [Documentation] | Uses Honeycomb API to remove all configured ipv4\
-| | ... | addresses from the sub-interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb removes all sub-interface ipv4 addresses\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier}
-| | Remove all ip addresses from sub_interface
-| | ... | ${node} | ${super_if} | ${identifier} | ipv4
-
-| Sub-interface ipv4 address from Honeycomb should be empty
-| | [Documentation] | Uses Honeycomb API to verify that ipv4 address\
-| | ... | configuration on the specified sub-interface is empty.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface ipv4 address from Honeycomb should be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier}
-| | ${if_data}= | Get sub interface oper data
-| | ... | ${node} | ${super_if} | ${identifier}
-| | Run keyword and expect error | *KeyError: 'ipv4'*
-| | ... | Set Variable | ${if_data['ipv4']['address'][0]['ip']}
-
-| Sub-interface ipv4 address from VAT should be empty
-| | [Documentation] | Uses VAT to verify that ipv4 address\
-| | ... | configuration on the specified sub-interface is empty.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - sub_interface - Name of an sub-interface on the specified node.\
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface ipv4 address from VAT should be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
-| | ...
-| | [Arguments] | ${node} | ${sub_interface}
-| | ${data}= | VPP get interface ip addresses
-| | ... | ${node} | ${sub_interface} | ipv4
-| | Should be empty | ${data}
-
-| Honeycomb sets sub-interface ipv6 address
-| | [Documentation] | Uses Honeycomb API to configure an ipv6 address on the\
-| | ... | spcified sub-interface. Replaces any existing ipv6 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - address - IPv6 address to set. Type: string
-| | ... | - prefix - IPv6 network prefix length to set. Type: integer
-| | ...
-| | ... | *Example:*
-| | ... | \| | Honeycomb sets sub-interface ipv6 address\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
-| | ... | \| 10::10 \| ${64} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
-| | Add ip address to sub_interface
-| | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv6
-
-| Sub-interface IPv6 address from Honeycomb should contain
-| | [Documentation] | Uses Honeycomb API to verify ipv6 address configuration\
-| | ... | on the specified sub-interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ... | - address - IPv6 address to expect. Type: string
-| | ... | - prefix - IPv6 network prefix length to expect. Type: integer
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface IPv6 address from Honeycomb should contain\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \
-| | ... | \| 10::10 \| ${64} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix}
-| | ${if_data}= | Get sub interface oper data
-| | ... | ${node} | ${super_if} | ${identifier}
-| | ${settings}= | Create Dictionary
-| | ... | ip=${address} | prefix-length=${prefix}
-| | Should contain | ${if_data['ipv6']['address']} | ${settings}
-
-| Sub-interface IPv6 address from VAT should contain
-| | [Documentation] | Uses VAT to verify ipv6 address configuration\
-| | ... | on the specified sub-interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - sub_interface - Name of an sub-interface on the specified node.\
-| | ... | Type: string
-| | ... | - address - IPv6 address to expect. Type: string
-| | ... | - prefix - IPv6 network prefix length to expect. Type: integer
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface IPv6 address from VAT should contain\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
-| | ...
-| | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix}
-| | ${data}= | VPP get interface ip addresses
-| | ... | ${node} | ${sub_interface} | ipv6
-| | Should be equal | ${data[0]['ip']} | ${address}
-| | Should be equal | ${data[0]['prefix_length']} | ${prefix}
-
-| Honeycomb removes all sub-interface ipv6 addresses
-| | [Documentation] | Uses Honeycomb API to remove all configured ipv6\
-| | ... | addresses from the sub-interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb removes all sub-interface ipv6 addresses\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier}
-| | Remove all ip addresses from sub_interface
-| | ... | ${node} | ${super_if} | ${identifier} | ipv6
-
-| Sub-interface ipv6 address from Honeycomb should be empty
-| | [Documentation] | Uses Honeycomb API to verify that ipv6 address\
-| | ... | configuration on the specified sub-interface is empty.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - super_if - Super-interface. Type: string
-| | ... | - identifier - Sub-interface ID. Type: integer or string
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface ipv6 address from Honeycomb should be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \|
-| | ...
-| | [Arguments] | ${node} | ${super_if} | ${identifier}
-| | ${if_data}= | Get sub interface oper data
-| | ... | ${node} | ${super_if} | ${identifier}
-| | Run keyword and expect error | *KeyError: 'ipv6'*
-| | ... | Set Variable | ${if_data['ipv6']['address'][0]['ip']}
-
-| Sub-interface ipv6 address from VAT should be empty
-| | [Documentation] | Uses VAT to verify that ipv6 address\
-| | ... | configuration on the specified sub-interface is empty.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ... | - sub_interface - Name of an sub-interface on the specified node.\
-| | ... | Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| sub-interface ipv6 address from VAT should be empty\
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \|
-| | ...
-| | [Arguments] | ${node} | ${sub_interface}
-| | ${data}= | VPP get interface ip addresses
-| | ... | ${node} | ${sub_interface} | ipv6
-| | Should be empty | ${data}