CSIT-28: IPsec tests initial commit

Change-Id: I525d3c4f47c3f151b55af5bbdd9d2e8c1ce2863f
Signed-off-by: Matus Fabian <matfabia@cisco.com>

1 files changed, 228 insertions, 0 deletions

diff --git a/resources/libraries/robot/ipsec.robot b/resources/libraries/robot/ipsec.robot
new file mode 100644
index 0000000000..cf7cc0f6c0
--- /dev/null
+++ b/resources/libraries/robot/ipsec.robot
@@ -0,0 +1,228 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Library | resources.libraries.python.IPsecUtil
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.TrafficScriptExecutor
+| Library | resources.libraries.python.IPv4Util
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.Routing
+| Library | String
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ...     | WITH NAME | dut1_v4
+| Documentation | *IPsec keywords.*
+
+*** Keywords ***
+| IPsec Generate Keys
+| | [Documentation] | Generate keys for IPsec.
+| | ...
+| | ... | *Arguments:*
+| | ... | - crypto_alg - Encryption algorithm. Type: enum
+| | ... | - integ_alg - Integrity algorithm. Type: enum
+| | ...
+| | ... | _NOTE:_ This KW sets following test case variable:
+| | ... | - encr_key - Encryption key. Type: string
+| | ... | - auth_key - Integrity key. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
+| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
+| | ... | \| IPsec Generate Keys \| ${encr_alg} \| ${auth_alg} \|
+| | [Arguments] | ${crypto_alg} | ${integ_alg}
+| | ${encr_key_len}= | Get Crypto Alg Key Len | ${crypto_alg}
+| | ${encr_key}= | Generate Random String | ${encr_key_len}
+| | ${auth_key_len}= | Get Integ Alg Key Len | ${integ_alg}
+| | ${auth_key}= | Generate Random String | ${auth_key_len}
+| | Set Test Variable | ${encr_key}
+| | Set Test Variable | ${auth_key}
+
+| Setup Path for IPsec testing
+| | [Documentation] | Setup path for IPsec testing TG<-->DUT1.
+| | ...
+| | ... | _NOTE:_ This KW sets following test case variable:
+| | ... | - tg_node - TG node. Type: dictionary
+| | ... | - tg_if - TG interface connected to DUT. Type: string
+| | ... | - tg_if_mac - TG interface MAC. Type: string
+| | ... | - dut_node - DUT node. Type: dictionary
+| | ... | - dut_if - DUT interface connected to TG. Type: string
+| | ... | - dut_if_mac - DUT interface MAC. Type: string
+| | ... | - dut_lo - DUT loopback interface. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Setup Path for IPsec testing \|
+| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
+| | Compute Path
+| | ${tg_if} | ${tg_node}= | Next Interface
+| | ${dut_if} | ${dut_node}= | Next Interface
+| | ${dut_if_mac}= | Get Interface Mac | ${dut_node} | ${dut_if}
+| | ${tg_if_mac}= | Get Interface Mac | ${tg_node} | ${tg_if}
+| | ${dut_lo}= | Vpp Create Loopback | ${dut_node}
+| | Set Interface State | ${dut_node} | ${dut_if} | up
+| | Set Interface State | ${dut_node} | ${dut_lo} | up
+| | Vpp Node Interfaces Ready Wait | ${dut_node}
+| | Set Test Variable | ${tg_node}
+| | Set Test Variable | ${tg_if}
+| | Set Test Variable | ${tg_if_mac}
+| | Set Test Variable | ${dut_node}
+| | Set Test Variable | ${dut_if}
+| | Set Test Variable | ${dut_if_mac}
+| | Set Test Variable | ${dut_lo}
+
+| Setup Topology for IPv4 IPsec testing
+| | [Documentation] | Setup topology for IPv4 IPsec testing.
+| | ...
+| | ... | _NOTE:_ This KW sets following test case variable:
+| | ... | - dut_tun_ip - DUT tunnel IP address. Type: string
+| | ... | - dut_src_ip - DUT source IP address. Type: string
+| | ... | - tg_tun_ip - TG tunnel IP address. Type: string
+| | ... | - tg_src_ip - TG source IP address. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Setup Topology for IPv4 IPsec testing \|
+| | Setup Path for IPsec testing
+| | Set Interface Address | ${dut_node} | ${dut_if} | ${dut_if_ip4}
+| | ...                   | ${ip4_plen}
+| | Set Interface Address | ${dut_node} | ${dut_lo} | ${dut_lo_ip4}
+| | ...                   | ${ip4_plen}
+| | dut1_v4.Set Arp | ${dut_if} | ${tg_if_ip4} | ${tg_if_mac}
+| | Vpp Route Add | ${dut_node} | ${tg_lo_ip4} | ${ip4_plen} | ${tg_if_ip4}
+| | ...           | ${dut_if}
+| | Set Test Variable | ${dut_tun_ip} | ${dut_if_ip4}
+| | Set Test Variable | ${dut_src_ip} | ${dut_lo_ip4}
+| | Set Test Variable | ${tg_tun_ip} | ${tg_if_ip4}
+| | Set Test Variable | ${tg_src_ip} | ${tg_lo_ip4}
+
+| Setup Topology for IPv6 IPsec testing
+| | [Documentation] | Setup topology fo IPv6 IPsec testing.
+| | ...
+| | ... | _NOTE:_ This KW sets following test case variable:
+| | ... | - dut_tun_ip - DUT tunnel IP address. Type: string
+| | ... | - dut_src_ip - DUT source IP address. Type: string
+| | ... | - tg_tun_ip - TG tunnel IP address. Type: string
+| | ... | - tg_src_ip - TG source IP address. Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| Setup Topology for IPv6 IPsec testing \|
+| | Setup Path for IPsec testing
+| | VPP Set If IPv6 Addr | ${dut_node} | ${dut_if} | ${dut_if_ip6} | ${ip6_plen}
+| | VPP Set If IPv6 Addr | ${dut_node} | ${dut_lo} | ${dut_lo_ip6} | ${ip6_plen}
+| | Add IP Neighbor | ${dut_node} | ${dut_if} | ${tg_if_ip6} | ${tg_if_mac}
+| | Vpp All RA Suppress Link Layer | ${nodes}
+| | Vpp Route Add | ${dut_node} | ${tg_lo_ip6} | ${ip6_plen} | ${tg_if_ip6}
+| | ...           | ${dut_if}
+| | Set Test Variable | ${dut_tun_ip} | ${dut_if_ip6}
+| | Set Test Variable | ${dut_src_ip} | ${dut_lo_ip6}
+| | Set Test Variable | ${tg_tun_ip} | ${tg_if_ip6}
+| | Set Test Variable | ${tg_src_ip} | ${tg_lo_ip6}
+
+| VPP Setup IPsec Manual Keyed Connection
+| | [Documentation] | Setup IPsec manual keyed connection on VPP node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - VPP node to setup IPsec on. Type: dictionary
+| | ... | - interface - Interface to enable IPsec on. Type: string
+| | ... | - crypto_alg - Encrytion algorithm. Type: enum
+| | ... | - crypto_key - Encryption key. Type: string
+| | ... | - integ_alg - Integrity algorithm. Type: enum
+| | ... | - integ_key - Integrity key. Type: string
+| | ... | - l_spi - Local SPI. Type: integer
+| | ... | - r_spi - Remote SPI. Type: integer
+| | ... | - l_ip - Local IP address. Type: string
+| | ... | - r_ip - Remote IP address. Type: string
+| | ... | - l_tunnel - Local tunnel IP address (optional). Type: string
+| | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
+| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
+| | ... | \| Setup IPsec Manual Keyed Connection \| ${nodes['DUT1']} \
+| | ... | \| GigabitEthernet0/8/0 \| ${encr_alg} \| sixteenbytes_key \
+| | ... | \| ${auth_alg} \| twentybytessecretkey \| ${1000} \| ${1001} \
+| | ... | \| 192.168.4.4 \| 192.168.3.3 \| 192.168.100.3 \| 192.168.100.2 \|
+| | [Arguments] | ${node} | ${interface} | ${crypto_alg} | ${crypto_key}
+| | ...         | ${integ_alg} | ${integ_key} | ${l_spi} | ${r_spi} | ${l_ip}
+| | ...         | ${r_ip} | ${l_tunnel}=${None} | ${r_tunnel}=${None}
+| | ${l_sa_id}= | Set Variable | ${10}
+| | ${r_sa_id}= | Set Variable | ${20}
+| | ${spd_id}= | Set Variable | ${1}
+| | ${p_hi}= | Set Variable | ${100}
+| | ${p_lo}= | Set Variable | ${10}
+| | VPP IPsec Add SAD Entry | ${node} | ${l_sa_id} | ${l_spi} | ${crypto_alg}
+| | ...                     | ${crypto_key} | ${integ_alg} | ${integ_key}
+| | ...                     | ${l_tunnel} | ${r_tunnel}
+| | VPP IPsec Add SAD Entry | ${node} | ${r_sa_id} | ${r_spi} | ${crypto_alg}
+| | ...                     | ${crypto_key} | ${integ_alg} | ${integ_key}
+| | ...                     | ${r_tunnel} | ${l_tunnel}
+| | VPP IPsec Add SPD | ${node} | ${spd_id}
+| | VPP IPsec SPD Add If | ${node} | ${spd_id} | ${interface}
+| | ${action}= | Policy Action Bypass
+| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_hi} | ${action}
+| | ...                     | inbound=${TRUE} | proto=${ESP_PROTO}
+| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_hi} | ${action}
+| | ...                     | inbound=${FALSE} | proto=${ESP_PROTO}
+| | ${action}= | Policy Action Protect
+| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_lo} | ${action}
+| | ...                     | sa_id=${r_sa_id} | laddr_range=${l_ip}
+| | ...                     | raddr_range=${r_ip} | inbound=${TRUE}
+| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_lo} | ${action}
+| | ...                     | sa_id=${l_sa_id} | laddr_range=${l_ip}
+| | ...                     | raddr_range=${r_ip} | inbound=${FALSE}
+
+| Send and Receive IPsec Packet
+| | [Documentation] | Send IPsec packet from TG to DUT. Receive IPsec packet\
+| | ...             | from DUT on TG and verify ESP encapsulation.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - TG node. Type: dictionary
+| | ... | - interface - TG Interface. Type: string
+| | ... | - dst_mac - Destination MAC. Type: string
+| | ... | - crypto_alg - Encrytion algorithm. Type: enum
+| | ... | - crypto_key - Encryption key. Type: string
+| | ... | - integ_alg - Integrity algorithm. Type: enum
+| | ... | - integ_key - Integrity key. Type: string
+| | ... | - l_spi - Local SPI. Type: integer
+| | ... | - r_spi - Remote SPI. Type: integer
+| | ... | - l_ip - Local IP address. Type: string
+| | ... | - r_ip - Remote IP address. Type: string
+| | ... | - l_tunnel - Local tunnel IP address (optional). Type: string
+| | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string
+| | ...
+| | ... | *Example:*
+| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
+| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
+| | ... | \| Send and Receive IPsec Packet \| ${nodes['TG']} \| eth1 \
+| | ... | \| 52:54:00:d4:d8:22 \| ${encr_alg} \| sixteenbytes_key \
+| | ... | \| ${auth_alg} \| twentybytessecretkey \| ${1001} \| ${1000} \
+| | ... | \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \| 192.168.100.3 \|
+| | [Arguments] | ${node} | ${interface} | ${dst_mac} | ${crypto_alg}
+| | ...         | ${crypto_key} | ${integ_alg} | ${integ_key} | ${l_spi}
+| | ...         | ${r_spi} | ${l_ip} | ${r_ip} | ${l_tunnel}=${None}
+| | ...         | ${r_tunnel}=${None}
+| | ${src_mac}= | Get Interface Mac | ${node} | ${interface}
+| | ${if_name}= | Get Interface Name | ${node} | ${interface}
+| | ${args}= | Traffic Script Gen Arg | ${if_name} | ${if_name} | ${src_mac}
+| | ...      | ${dst_mac} | ${l_ip} | ${r_ip}
+| | ${crypto_alg_str}= | Get Crypto Alg Scapy Name | ${crypto_alg}
+| | ${integ_alg_str}= | Get Integ Alg Scapy Name | ${integ_alg}
+| | ${args}= | Catenate | ${args} | --crypto_alg ${crypto_alg_str}
+| | ...      | --crypto_key ${crypto_key} | --integ_alg ${integ_alg_str}
+| | ...      | --integ_key ${integ_key} | --l_spi ${l_spi} | --r_spi ${r_spi}
+| | ${args}= | Set Variable If | "${l_tunnel}" == "${None}" | ${args}
+| | ... | ${args} --src_tun ${l_tunnel}
+| | ${args}= | Set Variable If | "${r_tunnel}" == "${None}" | ${args}
+| | ... | ${args} --dst_tun ${r_tunnel}
+| | Run Traffic Script On Node | ipsec.py | ${node} | ${args}