CSIT-992: Give MDR parameters official names

Change-Id: I1da9a64fb06e015f2b2a0aacb46a53d70349b4b6
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

5 files changed, 131 insertions, 118 deletions

diff --git a/resources/libraries/python/TrafficGenerator.py b/resources/libraries/python/TrafficGenerator.py
index e7c8c4829a..bf6383e52a 100644
--- a/resources/libraries/python/TrafficGenerator.py
+++ b/resources/libraries/python/TrafficGenerator.py
@@ -597,9 +597,9 @@ class TrafficGenerator(AbstractRateProvider):
             duration, unit_rate, self.frame_size, self.traffic_type,
             self.warmup_time, latency=True)
         transmit_count = int(self.get_sent())
-        drop_count = int(self.get_loss())
+        loss_count = int(self.get_loss())
         measurement = ReceiveRateMeasurement(
-            duration, transmit_rate, transmit_count, drop_count)
+            duration, transmit_rate, transmit_count, loss_count)
         measurement.latency = self.get_latency_int()
         return measurement
 
@@ -609,18 +609,20 @@ class OptimizedSearch(object):
 
     @staticmethod
     def perform_optimized_ndrpdr_search(
-            frame_size, traffic_type, fail_rate, line_rate,
-            allowed_drop_fraction=0.005, final_relative_width=0.005,
-            final_trial_duration=30.0, initial_trial_duration=1.0,
-            intermediate_phases=2, timeout=600.0):
+            frame_size, traffic_type, minimum_transmit_rate,
+            maximum_transmit_rate, packet_loss_ratio=0.005,
+            final_relative_width=0.005, final_trial_duration=30.0,
+            initial_trial_duration=1.0, intermediate_phases=2, timeout=600.0):
         """Setup initialized TG, perform optimized search, return intervals.
 
         :param frame_size: Frame size identifier or value [B].
         :param traffic_type: Module name as a traffic type identifier.
             See resources/traffic_profiles/trex for implemented modules.
-        :param fail_rate: Minimal target transmit rate [pps].
-        :param line_rate: Maximal target transmit rate [pps].
-        :param allowed_drop_fraction: Fraction of dropped packets for PDR [1].
+        :param minimum_transmit_rate: Minimal bidirectional
+            target transmit rate [pps].
+        :param maximum_transmit_rate: Maximal bidirectional
+            target transmit rate [pps].
+        :param packet_loss_ratio: Fraction of packets lost, for PDR [1].
         :param final_relative_width: Final lower bound transmit rate
             cannot be more distant that this multiple of upper bound [1].
         :param final_trial_duration: Trial duration for the final phase [s].
@@ -632,9 +634,9 @@ class OptimizedSearch(object):
             before this overall time [s].
         :type frame_size: str or int
         :type traffic_type: str
-        :type fail_rate: float
-        :type line_rate: float
-        :type allowed_drop_fraction: float
+        :type minimum_transmit_rate: float
+        :type maximum_transmit_rate: float
+        :type packet_loss_ratio: float
         :type final_relative_width: float
         :type final_trial_duration: float
         :type initial_trial_duration: float
@@ -656,5 +658,5 @@ class OptimizedSearch(object):
             intermediate_phases=intermediate_phases,
             initial_trial_duration=initial_trial_duration, timeout=timeout)
         result = algorithm.narrow_down_ndr_and_pdr(
-            fail_rate, line_rate, allowed_drop_fraction)
+            minimum_transmit_rate, maximum_transmit_rate, packet_loss_ratio)
         return result
diff --git a/resources/libraries/python/search/AbstractSearchAlgorithm.py b/resources/libraries/python/search/AbstractSearchAlgorithm.py
index ae326bd4ca..08f3a6bebc 100644
--- a/resources/libraries/python/search/AbstractSearchAlgorithm.py
+++ b/resources/libraries/python/search/AbstractSearchAlgorithm.py
@@ -32,15 +32,15 @@ class AbstractSearchAlgorithm(object):
 
     @abstractmethod
     def narrow_down_ndr_and_pdr(
-            self, fail_rate, line_rate, allowed_drop_fraction):
+            self, fail_rate, line_rate, packet_loss_ratio):
         """Perform measurements to narrow down intervals, return them.
 
         :param fail_rate: Minimal target transmit rate [pps].
         :param line_rate: Maximal target transmit rate [pps].
-        :param allowed_drop_fraction: Fraction of dropped packets for PDR [1].
+        :param packet_loss_ratio: Fraction of packets lost, for PDR [1].
         :type fail_rate: float
         :type line_rate: float
-        :type allowed_drop_fraction: float
+        :type packet_loss_ratio: float
         :returns: Structure containing narrowed down intervals
             and their measurements.
         :rtype: NdrPdrResult
diff --git a/resources/libraries/python/search/OptimizedSearchAlgorithm.py b/resources/libraries/python/search/OptimizedSearchAlgorithm.py
index 43559e049b..0d3eacc937 100644
--- a/resources/libraries/python/search/OptimizedSearchAlgorithm.py
+++ b/resources/libraries/python/search/OptimizedSearchAlgorithm.py
@@ -78,8 +78,9 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
     class ProgressState(object):
         """Structure containing data to be passed around in recursion."""
 
-        def __init__(self, result, phases, duration, width_goal,
-                     allowed_drop_fraction, fail_rate, line_rate):
+        def __init__(
+                self, result, phases, duration, width_goal, packet_loss_ratio,
+                minimum_transmit_rate, maximum_transmit_rate):
             """Convert and store the argument values.
 
             :param result: Current measured NDR and PDR intervals.
@@ -87,30 +88,30 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
                 before the current one.
             :param duration: Trial duration to use in the current phase [s].
             :param width_goal: The goal relative width for the curreent phase.
-            :param allowed_drop_fraction: PDR fraction for the current search.
-            :param fail_rate: Minimum target transmit rate
+            :param packet_loss_ratio: PDR fraction for the current search.
+            :param minimum_transmit_rate: Minimum target transmit rate
                 for the current search [pps].
-            :param line_rate: Maximum target transmit rate
+            :param maximum_transmit_rate: Maximum target transmit rate
                 for the current search [pps].
             :type result: NdrPdrResult
             :type phases: int
             :type duration: float
             :type width_goal: float
-            :type allowed_drop_fraction: float
-            :type fail_rate: float
-            :type line_rate: float
+            :type packet_loss_ratio: float
+            :type minimum_transmit_rate: float
+            :type maximum_transmit_rate: float
             """
             self.result = result
             self.phases = int(phases)
             self.duration = float(duration)
             self.width_goal = float(width_goal)
-            self.allowed_drop_fraction = float(allowed_drop_fraction)
-            self.fail_rate = float(fail_rate)
-            self.line_rate = float(line_rate)
+            self.packet_loss_ratio = float(packet_loss_ratio)
+            self.minimum_transmit_rate = float(minimum_transmit_rate)
+            self.maximum_transmit_rate = float(maximum_transmit_rate)
 
     def __init__(self, rate_provider, final_relative_width=0.005,
                  final_trial_duration=30.0, initial_trial_duration=1.0,
-                 intermediate_phases=2, timeout=600.0):
+                 number_of_intermediate_phases=2, timeout=600.0):
         """Store rate provider and additional arguments.
 
         :param rate_provider: Rate provider to use by this search object.
@@ -119,56 +120,60 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
         :param final_trial_duration: Trial duration for the final phase [s].
         :param initial_trial_duration: Trial duration for the initial phase
             and also for the first intermediate phase [s].
-        :param intermediate_phases: Number of intermediate phases to perform
-            before the final phase [1].
+        :param number_of_intermediate_phases: Number of intermediate phases
+            to perform before the final phase [1].
         :param timeout: The search will fail itself when not finished
             before this overall time [s].
         :type rate_provider: AbstractRateProvider
         :type final_relative_width: float
         :type final_trial_duration: float
         :type initial_trial_duration: int
-        :type intermediate_phases: int
+        :type number_of_intermediate_phases: int
         :type timeout: float
         """
         super(OptimizedSearchAlgorithm, self).__init__(rate_provider)
         self.final_trial_duration = float(final_trial_duration)
         self.final_relative_width = float(final_relative_width)
-        self.intermediate_phases = int(intermediate_phases)
+        self.number_of_intermediate_phases = int(number_of_intermediate_phases)
         self.initial_trial_duration = float(initial_trial_duration)
         self.timeout = float(timeout)
 
     def narrow_down_ndr_and_pdr(
-            self, fail_rate, line_rate, allowed_drop_fraction):
+            self, minimum_transmit_rate, maximum_transmit_rate,
+            packet_loss_ratio):
         """Perform initial phase, create state object, proceed with next phases.
 
-        :param fail_rate: Minimal target transmit rate [pps].
-        :param line_rate: Maximal target transmit rate [pps].
-        :param allowed_drop_fraction: Fraction of dropped packets for PDR [1].
-        :type fail_rate: float
-        :type line_rate: float
-        :type allowed_drop_fraction: float
+        :param minimum_transmit_rate: Minimal target transmit rate [pps].
+        :param maximum_transmit_rate: Maximal target transmit rate [pps].
+        :param packet_loss_ratio: Fraction of packets lost, for PDR [1].
+        :type minimum_transmit_rate: float
+        :type maximum_transmit_rate: float
+        :type packet_loss_ratio: float
         :returns: Structure containing narrowed down intervals
             and their measurements.
         :rtype: NdrPdrResult
         :raises RuntimeError: If total duration is larger than timeout.
         """
-        fail_rate = float(fail_rate)
-        line_rate = float(line_rate)
-        allowed_drop_fraction = float(allowed_drop_fraction)
+        minimum_transmit_rate = float(minimum_transmit_rate)
+        maximum_transmit_rate = float(maximum_transmit_rate)
+        packet_loss_ratio = float(packet_loss_ratio)
         line_measurement = self.rate_provider.measure(
-            self.initial_trial_duration, line_rate)
+            self.initial_trial_duration, maximum_transmit_rate)
         # 0.999 is to avoid rounding errors which make
         # the subsequent logic think the width is too broad.
         max_lo = max(
-            fail_rate, line_rate * (1.0 - 0.999 * self.final_relative_width))
-        mrr = min(max_lo, max(fail_rate, line_measurement.receive_rate))
+            minimum_transmit_rate,
+            maximum_transmit_rate * (1.0 - 0.999 * self.final_relative_width))
+        mrr = min(
+            max_lo, max(minimum_transmit_rate, line_measurement.receive_rate))
         mrr_measurement = self.rate_provider.measure(
             self.initial_trial_duration, mrr)
         # Attempt to get narrower width.
         max2_lo = max(
-            fail_rate, mrr * (1.0 - 0.999 * self.final_relative_width))
+            minimum_transmit_rate,
+            mrr * (1.0 - 0.999 * self.final_relative_width))
         mrr2 = min(max2_lo, mrr_measurement.receive_rate)
-        if mrr2 > fail_rate:
+        if mrr2 > minimum_transmit_rate:
             line_measurement = mrr_measurement
             mrr_measurement = self.rate_provider.measure(
                 self.initial_trial_duration, mrr2)
@@ -176,9 +181,9 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
             mrr_measurement, line_measurement)
         starting_result = NdrPdrResult(starting_interval, starting_interval)
         state = self.ProgressState(
-            starting_result, self.intermediate_phases,
+            starting_result, self.number_of_intermediate_phases,
             self.final_trial_duration, self.final_relative_width,
-            allowed_drop_fraction, fail_rate, line_rate)
+            packet_loss_ratio, minimum_transmit_rate, maximum_transmit_rate)
         state = self.ndrpdr(state)
         return state.result
 
@@ -202,20 +207,20 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
         ndr_interval = self._new_interval(
             state.result.ndr_interval, measurement, 0.0)
         pdr_interval = self._new_interval(
-            state.result.pdr_interval, measurement, state.allowed_drop_fraction)
+            state.result.pdr_interval, measurement, state.packet_loss_ratio)
         state.result = NdrPdrResult(ndr_interval, pdr_interval)
         return state
 
     @staticmethod
-    def _new_interval(old_interval, measurement, allowed_drop_fraction):
+    def _new_interval(old_interval, measurement, packet_loss_ratio):
         """Return new interval with bounds updated according to the measurement.
 
         :param old_interval: The current interval before the measurement.
         :param measurement: The new meaqsurement to take into account.
-        :param allowed_drop_fraction: Fraction for PDR (or zero for NDR).
+        :param packet_loss_ratio: Fraction for PDR (or zero for NDR).
         :type old_interval: ReceiveRateInterval
         :type measurement: ReceiveRateMeasurement
-        :type allowed_drop_fraction: float
+        :type packet_loss_ratio: float
         :returns: The updated interval.
         :rtype: ReceiveRateInterval
         """
@@ -227,7 +232,7 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
             else:
                 return ReceiveRateInterval(old_lo, measurement)
         # Priority one: invalid lower bound allows only one type of update.
-        if old_lo.drop_fraction > allowed_drop_fraction:
+        if old_lo.loss_fraction > packet_loss_ratio:
             # We can only expand down, old bound becomes valid upper one.
             if measurement.target_tr < old_lo.target_tr:
                 return ReceiveRateInterval(measurement, old_lo)
@@ -237,20 +242,20 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
         # Next priorities depend on target Tr.
         if measurement.target_tr < old_lo.target_tr:
             # Lower external measurement, relevant only
-            # if the new measurement has high drop rate.
-            if measurement.drop_fraction > allowed_drop_fraction:
+            # if the new measurement has high loss rate.
+            if measurement.loss_fraction > packet_loss_ratio:
                 # Returning the broader interval as old_lo
                 # would be invalid upper bound.
                 return ReceiveRateInterval(measurement, old_hi)
         elif measurement.target_tr > old_hi.target_tr:
             # Upper external measurement, only relevant for invalid upper bound.
-            if old_hi.drop_fraction <= allowed_drop_fraction:
+            if old_hi.loss_fraction <= packet_loss_ratio:
                 # Old upper bound becomes valid new lower bound.
                 return ReceiveRateInterval(old_hi, measurement)
         else:
             # Internal measurement, replaced boundary
-            # depends on measured drop fraction.
-            if measurement.drop_fraction > allowed_drop_fraction:
+            # depends on measured loss fraction.
+            if measurement.loss_fraction > packet_loss_ratio:
                 # We have found a narrow valid interval,
                 # regardless of whether old upper bound was valid.
                 return ReceiveRateInterval(old_lo, measurement)
@@ -258,7 +263,7 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
                 # In ideal world, we would not want to shrink interval
                 # if upper bound is not valid.
                 # In the real world, we want to shrink it for
-                # "invalid upper bound at line rate" case.
+                # "invalid upper bound at maximal rate" case.
                 return ReceiveRateInterval(measurement, old_hi)
         # Fallback, the interval is unchanged by the measurement.
         return old_interval
@@ -378,66 +383,71 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
                 state.width_goal, state.result.ndr_interval.rel_tr_width)
             pdr_rel_width = max(
                 state.width_goal, state.result.pdr_interval.rel_tr_width)
-            # If we are hitting line or fail rate, we cannot shift,
+            # If we are hitting maximal or minimal rate, we cannot shift,
             # but we can re-measure.
-            if ndr_lo.drop_fraction > 0.0:
-                if ndr_lo.target_tr > state.fail_rate:
-                    new_tr = max(state.fail_rate, self.double_step_down(
-                        ndr_rel_width, ndr_lo.target_tr))
+            if ndr_lo.loss_fraction > 0.0:
+                if ndr_lo.target_tr > state.minimum_transmit_rate:
+                    new_tr = max(
+                        state.minimum_transmit_rate,
+                        self.double_step_down(ndr_rel_width, ndr_lo.target_tr))
                     logging.info("ndr lo external %s", new_tr)
                     state = self._measure_and_update_state(state, new_tr)
                     continue
                 elif ndr_lo.duration < state.duration:
-                    logging.info("ndr lo fail re-measure")
+                    logging.info("ndr lo minimal re-measure")
                     state = self._measure_and_update_state(
-                        state, state.fail_rate)
+                        state, state.minimum_transmit_rate)
                     continue
-            if pdr_lo.drop_fraction > state.allowed_drop_fraction:
-                if pdr_lo.target_tr > state.fail_rate:
-                    new_tr = max(state.fail_rate, self.double_step_down(
-                        pdr_rel_width, pdr_lo.target_tr))
+            if pdr_lo.loss_fraction > state.packet_loss_ratio:
+                if pdr_lo.target_tr > state.minimum_transmit_rate:
+                    new_tr = max(
+                        state.minimum_transmit_rate,
+                        self.double_step_down(pdr_rel_width, pdr_lo.target_tr))
                     logging.info("pdr lo external %s", new_tr)
                     state = self._measure_and_update_state(state, new_tr)
                     continue
                 elif pdr_lo.duration < state.duration:
-                    logging.info("pdr lo fail re-measure")
+                    logging.info("pdr lo minimal re-measure")
                     state = self._measure_and_update_state(
-                        state, state.fail_rate)
+                        state, state.minimum_transmit_rate)
                     continue
-            if ndr_hi.drop_fraction <= 0.0:
-                if ndr_hi.target_tr < state.line_rate:
-                    new_tr = min(state.line_rate, self.double_step_up(
-                        ndr_rel_width, ndr_hi.target_tr))
+            if ndr_hi.loss_fraction <= 0.0:
+                if ndr_hi.target_tr < state.maximum_transmit_rate:
+                    new_tr = min(
+                        state.maximum_transmit_rate,
+                        self.double_step_up(ndr_rel_width, ndr_hi.target_tr))
                     logging.info("ndr hi external %s", new_tr)
                     state = self._measure_and_update_state(state, new_tr)
                     continue
                 elif ndr_hi.duration < state.duration:
-                    logging.info("ndr hi line re-measure")
+                    logging.info("ndr hi maximal re-measure")
                     state = self._measure_and_update_state(
-                        state, state.line_rate)
+                        state, state.maximum_transmit_rate)
                     continue
-            if pdr_hi.drop_fraction <= state.allowed_drop_fraction:
-                if pdr_hi.target_tr < state.line_rate:
-                    new_tr = min(state.line_rate, self.double_step_up(
-                        pdr_rel_width, pdr_hi.target_tr))
+            if pdr_hi.loss_fraction <= state.packet_loss_ratio:
+                if pdr_hi.target_tr < state.maximum_transmit_rate:
+                    new_tr = min(
+                        state.maximum_transmit_rate,
+                        self.double_step_up(pdr_rel_width, pdr_hi.target_tr))
                     logging.info("pdr hi external %s", new_tr)
                     state = self._measure_and_update_state(state, new_tr)
                     continue
                 elif pdr_hi.duration < state.duration:
-                    logging.info("ndr hi line re-measure")
+                    logging.info("ndr hi maximal re-measure")
                     state = self._measure_and_update_state(
-                        state, state.line_rate)
+                        state, state.maximum_transmit_rate)
                     continue
-            # If we are hitting line_rate, it is still worth narrowing width,
+            # If we are hitting maximum_transmit_rate,
+            # it is still worth narrowing width,
             # hoping large enough Df will happen.
-            # But if we are hitting fail rate (at current duration),
+            # But if we are hitting the minimal rate (at current duration),
             # no additional measurement will help with that,
             # so we can stop narrowing in this phase.
-            if (ndr_lo.target_tr <= state.fail_rate
-                    and ndr_lo.drop_fraction > 0.0):
+            if (ndr_lo.target_tr <= state.minimum_transmit_rate
+                    and ndr_lo.loss_fraction > 0.0):
                 ndr_rel_width = 0.0
-            if (pdr_lo.target_tr <= state.fail_rate
-                    and pdr_lo.drop_fraction > state.allowed_drop_fraction):
+            if (pdr_lo.target_tr <= state.minimum_transmit_rate
+                    and pdr_lo.loss_fraction > state.packet_loss_ratio):
                 pdr_rel_width = 0.0
             if max(ndr_rel_width, pdr_rel_width) > state.width_goal:
                 # We have to narrow some width.
@@ -473,7 +483,7 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm):
                 logging.info("re-measuring PDR upper bound")
                 self._measure_and_update_state(state, pdr_hi.target_tr)
                 continue
-            # Widths are narrow (or failing), bound measurements
+            # Widths are narrow (or lower bound minimal), bound measurements
             # are long enough, we can return.
             logging.info("phase done")
             break
diff --git a/resources/libraries/python/search/ReceiveRateMeasurement.py b/resources/libraries/python/search/ReceiveRateMeasurement.py
index 58aa819017..d052ebd3bf 100644
--- a/resources/libraries/python/search/ReceiveRateMeasurement.py
+++ b/resources/libraries/python/search/ReceiveRateMeasurement.py
@@ -17,38 +17,38 @@
 class ReceiveRateMeasurement(object):
     """Structure defining the result of single Rr measurement."""
 
-    def __init__(self, duration, target_tr, transmit_count, drop_count):
+    def __init__(self, duration, target_tr, transmit_count, loss_count):
         """Constructor, normalize primary and compute secondary quantities.
 
         :param duration: Measurement duration [s].
         :param target_tr: Target transmit rate [pps].
             If bidirectional traffic is measured, this is bidirectional rate.
         :param transmit_count: Number of packets transmitted [1].
-        :param drop_count: Number of packets transmitted but not received [1].
+        :param loss_count: Number of packets transmitted but not received [1].
         :type duration: float
         :type target_tr: float
         :type transmit_count: int
-        :type drop_count: int
+        :type loss_count: int
         """
         self.duration = float(duration)
         self.target_tr = float(target_tr)
         self.transmit_count = int(transmit_count)
-        self.drop_count = int(drop_count)
-        self.receive_count = transmit_count - drop_count
+        self.loss_count = int(loss_count)
+        self.receive_count = transmit_count - loss_count
         self.transmit_rate = transmit_count / self.duration
-        self.drop_rate = drop_count / self.duration
+        self.loss_rate = loss_count / self.duration
         self.receive_rate = self.receive_count / self.duration
-        self.drop_fraction = float(self.drop_count) / self.transmit_count
+        self.loss_fraction = float(self.loss_count) / self.transmit_count
         # TODO: Do we want to store also the real time (duration + overhead)?
 
     def __str__(self):
-        """Return string reporting input and drop fraction."""
+        """Return string reporting input and loss fraction."""
         return "d={dur!s},Tr={rate!s},Df={frac!s}".format(
-            dur=self.duration, rate=self.target_tr, frac=self.drop_fraction)
+            dur=self.duration, rate=self.target_tr, frac=self.loss_fraction)
 
     def __repr__(self):
         """Return string evaluable as a constructor call."""
         return ("ReceiveRateMeasurement(duration={dur!r},target_tr={rate!r}"
-                ",transmit_count={trans!r},drop_count={drop!r})".format(
+                ",transmit_count={trans!r},loss_count={loss!r})".format(
                     dur=self.duration, rate=self.target_tr,
-                    trans=self.transmit_count, drop=self.drop_count))
+                    trans=self.transmit_count, loss=self.loss_count))
diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index 771e7486cb..1bb989373f 100644
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -368,9 +368,9 @@
 | | ... | *Arguments:*
 | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
 | | ... | - topology_type - Topology type. Type: string
-| | ... | - fail_rate - Lower limit of search [pps]. Type: float
-| | ... | - line_rate - Upper limit of search [pps]. Type: float
-| | ... | - allowed_drop_fraction - Accepted loss during search. Type: float
+| | ... | - minimum_transmit_rate - Lower limit of search [pps]. Type: float
+| | ... | - maximum_transmit_rate - Upper limit of search [pps]. Type: float
+| | ... | - packet_drop_ratio - Accepted loss during search. Type: float
 | | ... | - final_relative_width - Maximal width multiple of upper. Type: float
 | | ... | - final_trial_duration - Duration of final trials [s]. Type: float
 | | ... | - initial_trial_duration - Duration of initial trials [s]. Type: float
@@ -383,19 +383,20 @@
 | | ... | 3-node-IPv4 \| \${100000} \| \${14880952} \| \${0.005} \| \${0.005} \
 | | ... | \| \${30.0} \| \${1.0} \| \${2} \| ${600.0}
 | | ...
-| | [Arguments] | ${frame_size} | ${topology_type} | ${fail_rate} | ${line_rate}
-| | ... | ${allowed_drop_fraction}=${0.005} | ${final_relative_width}=${0.005}
-| | ... | ${final_trial_duration}=${30.0} | ${initial_trial_duration}=${1.0}
-| | ... | ${intermediate_phases}=${2} | ${timeout}=${600.0}
+| | [Arguments] | ${frame_size} | ${topology_type} | ${minimum_transmit_rate}
+| | ... | ${maximum_transmit_rate} | ${packet_loss_ratio}=${0.005}
+| | ... | ${final_relative_width}=${0.005} | ${final_trial_duration}=${30.0}
+| | ... | ${initial_trial_duration}=${1.0}
+| | ... | ${number_of_intermediate_phases}=${2} | ${timeout}=${600.0}
 | | ...
 | | ${result}= | Perform optimized ndrpdr search | ${frame_size}
-| | ... | ${topology_type} | ${fail_rate} | ${line_rate}
-| | ... | ${allowed_drop_fraction} | ${final_relative_width}
+| | ... | ${topology_type} | ${minimum_transmit_rate} | ${maximum_transmit_rate}
+| | ... | ${packet_loss_ratio} | ${final_relative_width}
 | | ... | ${final_trial_duration} | ${initial_trial_duration}
-| | ... | ${intermediate_phases} | timeout=${timeout}
+| | ... | ${number_of_intermediate_phases} | timeout=${timeout}
 | | Display result of NDRPDR search | ${result} | ${frame_size}
 | | Check NDRPDR interval validity | ${result.pdr_interval}
-| | ... | ${allowed_drop_fraction}
+| | ... | ${packet_loss_ratio}
 | | Check NDRPDR interval validity | ${result.ndr_interval}
 | | Perform additional measurements based on NDRPDR result
 | | ... | ${result} | ${frame_size} | ${topology_type}
@@ -471,20 +472,20 @@
 | | ...
 | | ... | *Arguments:*
 | | ... | - interval - Measured interval. Type: ReceiveRateInterval
-| | ... | - allowed_drop_fraction - Accepted loss (0.0 for NDR). Type: float
+| | ... | - packet_loss_ratio - Accepted loss (0.0 for NDR). Type: float
 | | ...
 | | ... | *Example:*
 | | ...
 | | ... | \| Check NDRPDR interval validity \| \${result.pdr_interval} \
 | | ... | \| \${0.005}
 | | ...
-| | [Arguments] | ${interval} | ${allowed_drop_fraction}=${0.0}
+| | [Arguments] | ${interval} | ${packet_loss_ratio}=${0.0}
 | | ...
 | | ${lower_bound_df}= | Set Variable | ${interval.measured_low.drop_fraction}
-| | Return From Keyword If | ${lower_bound_df} <= ${allowed_drop_fraction}
+| | Return From Keyword If | ${lower_bound_df} <= ${packet_loss_ratio}
 | | ${messagge}= | Catenate | SEPARATOR=${SPACE}
 | | ... | Lower bound fraction ${lower_bound_df}
-| | ... | does not reach ${allowed_drop_fraction}.
+| | ... | does not reach ${packet_loss_ratio}.
 | | Fail | ${message}
 
 | Perform additional measurements based on NDRPDR result