CSIT-235: Switched Port Analyzer mirroring (SPAN) - IPv4

 - add library for SPAN setup
 - add telemetry traffic script and a keyword to run it
 - add "telemetry" folders for python and robot libraries
 - move IPFIX libraries to these new folders
 - add first SPAN test case, mirroring IPv4 ICMP packets

Change-Id: Ibca35f724c13662bf80dce2d7e2649d1a0b8676a
Signed-off-by: selias <samelias@cisco.com>

2 files changed, 0 insertions, 568 deletions

diff --git a/tests/func/ipfix/ipfix_ipv4.robot b/tests/func/ipfix/ipfix_ipv4.robot
deleted file mode 100644
index 200bd34bcc..0000000000
--- a/tests/func/ipfix/ipfix_ipv4.robot
+++ /dev/null
@@ -1,290 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/ipfix.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPFIXSetup
-| Library | resources.libraries.python.Trace
-
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
-# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204)
-| Suite Setup | Run Keywords | Setup all TGs before traffic script
-| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes}
-| ...           | AND          | Vpp Show Errors | ${nodes['DUT1']}
-| ...           | AND          | Show vpp trace dump on all DUTs
-| Documentation | *IPFIX ipv4 test cases*
-| ...
-| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 is configured with IPv4
-| ... | routing and static routes. IPFIX is configured on DUT1 with
-| ... | DUT1->TG interface as collector. Test packets are
-| ... | sent from TG to DUT1. TG listens for flow report packets
-| ... | and verifies that they contains flow record of test packets sent.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 192.168.1.1
-| ${tg_to_dut1_ip}= | 192.168.1.2
-| ${dut2_to_dut1_ip}= | 192.168.2.1
-| ${route_ip}= | 16.0.0.1
-| ${prefix_length}= | 24
-| ${ip_version}= | ip4
-| ${port}= | 80
-| ${sessions}= | 80
-
-*** Test Cases ***
-| TC01: DUT sends IPFIX template and data packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and a basic classify session.
-| | ... | [Ver] Make TG listen for IPFIX template and data packets, verify
-| | ... | that packet is received and correct. No packets are sent from TG.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${route_ip} | 32
-| | ... | ${tg_to_dut1_ip} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${route_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${route_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${route_ip} | ${dut1_to_tg_ip}
-| | ... | count=0
-
-| TC02: DUT reports packet flow for traffic by source address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${route_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${route_ip} | 32
-| | ... | ${tg_to_dut1_ip} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${route_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${route_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${route_ip} | ${dut1_to_tg_ip}
-
-| TC03: DUT reports packet flow for traffic with local destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT1.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${route_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${route_ip} | 32
-| | ... | ${tg_to_dut1_ip} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut1_to_tg_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${route_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${route_ip} | ${dut1_to_tg_ip}
-
-| TC04: DUT reports packet flow for traffic with remote destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT2.
-| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen
-| | ... | for IPFIX template and data packets, verify that IPFIX reported
-| | ... | the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${route_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${route_ip} | 32
-| | ... | ${tg_to_dut1_ip} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip}
-| | ... | ${dut2_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut2_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${route_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${route_ip} | ${dut2_to_dut1_ip}
-
-| TC05: DUT reports packet flow for traffic by source and destination port
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address
-| | ... | and source and destination ports.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${route_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | And VPP configures classify session generic | ${dut1_node}
-| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | ... | l3 ${ip_version} src ${route_ip}
-| | ... | proto 6 l4 src_port ${port} dst_port ${port}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${route_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${route_ip} | ${dut1_to_tg_ip}
-| | ... | port=${port}
-
-| TC06: DUT reports packet flow with a large number of packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packets.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${route_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${route_ip} | 32
-| | ... | ${tg_to_dut1_ip} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${route_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${route_ip} | ${dut1_to_tg_ip}
-| | ... | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${route_ip} | ${dut1_to_tg_ip}
-| | ... | count=20000 | timeout=10
-
-| TC07: DUT reports packet flow when multiple sessions are configured
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add several classify sessions with different
-| | ... | ports.
-| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
-| | ... | configured sessions, then listen for IPFIX template and data packets,
-| | ... | verify that IPFIX reported the received packets for each session.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${route_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Vpp Route Add
-| | ... | ${dut1_node} | ${route_ip} | 32
-| | ... | ${tg_to_dut1_ip} | ${dut1_to_tg} | resolve_attempts=${NONE}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | :FOR | ${index} | IN RANGE | ${sessions}
-| | | VPP configures classify session generic | ${dut1_node}
-| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | | ... | l3 ${ip_version} src ${route_ip}
-| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${route_ip}
-| | ... | ${dut1_to_tg_ip}
-| | ... | mtu=1450 | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${route_ip} | ${dut1_to_tg_ip}
-| | ... | ${sessions} | timeout=10 | count=3
-# TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/ipfix/ipfix_ipv6.robot b/tests/func/ipfix/ipfix_ipv6.robot
deleted file mode 100644
index 7f86a16712..0000000000
--- a/tests/func/ipfix/ipfix_ipv6.robot
+++ /dev/null
@@ -1,278 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/ipfix.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPFIXSetup
-| Library | resources.libraries.python.IPv6Setup
-| Library | resources.libraries.python.Trace
-
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
-# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204)
-| Suite Setup | Run Keywords | Setup all TGs before traffic script
-| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes}
-| ...           | AND          | Vpp Show Errors | ${nodes['DUT1']}
-| ...           | AND          | Show vpp trace dump on all DUTs
-| Documentation | *IPFIX ipv6 test cases*
-| ...
-| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6
-| ... | routing and static routes. IPFIX is configured on DUT1 with
-| ... | DUT1->TG interface as collector.Test packets are
-| ... | sent from TG to or through DUT1. TG listens for flow report packets
-| ... | and verifies that they contains flow records of test packets sent.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 10::10
-| ${dut2_to_dut1_ip}= | 11::10
-| ${tg_to_dut1_ip}= | 12::10
-| ${prefix_length}= | 64
-| ${ip_version}= | ip6
-| ${port}= | 80
-| ${sessions}= | 45
-
-# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported.
-| ${dut1_to_tg_ip4}= | 192.168.1.1
-| ${tg_to_dut1_ip4}= | 16.0.0.1
-
-*** Test Cases ***
-| TC01: DUT reports packet flow for traffic by source address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-
-| TC02: DUT reports packet flow for traffic with local destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT1.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut1_to_tg_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-
-| TC03: DUT reports packet flow for traffic with remote destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT2.
-| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen
-| | ... | for IPFIX template and data packets, verify that IPFIX reported
-| | ... | the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip}
-| | ... | ${dut2_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut2_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${dut2_to_dut1_ip}
-
-| TC04: DUT reports packet flow for traffic by source and destination port
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address
-| | ... | and source and destination ports.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | And VPP configures classify session generic | ${dut1_node}
-| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | ... | proto 6 l4 src_port ${port} dst_port ${port}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | port=${port}
-
-| TC05: DUT reports packet flow with a large number of packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packets.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | count=20000 | timeout=10
-
-| TC06: DUT reports packet flow when multiple sessions are configured
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add several classify sessions with different
-| | ... | ports.
-| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
-| | ... | configured sessions, then listen for IPFIX template and data packets,
-| | ... | verify that IPFIX reported the received packets for each session.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | :FOR | ${index} | IN RANGE | ${sessions}
-| | | VPP configures classify session generic | ${dut1_node}
-| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | ... | mtu=1450 | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | ${sessions} | timeout=10 | count=3
-
-# TODO: DUT reports packet flow when ACL is configured with wildcards