csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 0 insertions, 120 deletions

diff --git a/tests/func/lisp/dataplane_generic.robot b/tests/func/lisp/dataplane_generic.robot
deleted file mode 100644
index 9ab69b2d71..0000000000
--- a/tests/func/lisp/dataplane_generic.robot
+++ /dev/null
@@ -1,120 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *IP AFI independent functional tests.*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is\
-| ... | configured between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv4 src-addr,\
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg1] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
-| | ... | [Ver1] Make TG send ICMPv4 Echo Req between its interfaces across\
-| | ... | both DUTs and LISP tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Cfg2] Disable LISP.
-| | ... | [Ver2] Verify packets are not received via LISP tunnel.
-| | ... | [Cfg3] Re-enable LISP.
-| | ... | [Ver3] Verify packets are received again via LISP tunnel.
-| | ... | [Ref] RFC6830.
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And   Interfaces in 3-node path are up
-| | And   IP addresses are set on interfaces
-| |       ... | ${dut1_node} | ${dut1_to_dut2}
-| |       ... | ${dut1_to_dut2_ip4} | ${prefix4}
-| |       ... | ${dut1_node} | ${dut1_to_tg}
-| |       ... | ${dut1_to_tg_ip4} | ${prefix4}
-| |       ... | ${dut2_node} | ${dut2_to_dut1}
-| |       ... | ${dut2_to_dut1_ip4} | ${prefix4}
-| |       ... | ${dut2_node} | ${dut2_to_tg}
-| |       ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| |       ... | ${tg_to_dut2_mac}
-| | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| |       ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| |      ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| |      ... | ${dut1_to_dut2_ip4_static_adjacency}
-| |      ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | Then Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Disable Lisp | ${dut1_node}
-| | Then Send packet from Port to Port should failed
-| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet from Port to Port should failed
-| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Enable Lisp | ${dut1_node}
-| | And Vpp Add Lisp Adjacency | ${dut1_node}
-| |     ... | ${dut1_to_dut2_ip4_static_adjacency['vni']}
-| |     ... | ${dut1_to_dut2_ip4_static_adjacency['deid']}
-| |     ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']}
-| |     ... | ${dut1_to_dut2_ip4_static_adjacency['seid']}
-| |     ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']}
-| | And Vpp Add Lisp Adjacency | ${dut2_node}
-| |     ... | ${dut2_to_dut1_ip4_static_adjacency['vni']}
-| |     ... | ${dut2_to_dut1_ip4_static_adjacency['deid']}
-| |     ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']}
-| |     ... | ${dut2_to_dut1_ip4_static_adjacency['seid']}
-| |     ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']}
-| | Then Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
\ No newline at end of file