csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 0 insertions, 393 deletions

diff --git a/tests/func/lisp/ipsec_ipv4_lispgpe_ipv4.robot b/tests/func/lisp/ipsec_ipv4_lispgpe_ipv4.robot
deleted file mode 100644
index 18494ab565..0000000000
--- a/tests/func/lisp/ipsec_ipv4_lispgpe_ipv4.robot
+++ /dev/null
@@ -1,393 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.LispUtil
-| Library | resources.libraries.python.VhostUser
-| Library | resources.libraries.python.QemuUtils
-| Library | resources.libraries.python.VPPUtil
-| Library | resources.libraries.python.IPsecUtil
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/vrf.robot
-| Resource | resources/libraries/robot/ipsec.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Resource | resources/libraries/robot/lisp/lispgpe.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
-| Resource | resources/libraries/robot/lisp/l2lisp.robot
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv4_ipsec_lispgpe_ipv4/ipv4_ipsec_lispgpe_ipv4.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Func Test Setup
-| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| ... | AND | Show vpp trace dump on all DUTs
-| ... | AND | Show Vpp Settings | ${nodes['DUT1']}
-| ... | AND | Show Vpp Settings | ${nodes['DUT2']}
-| ... | AND | Check VPP PID in Teardown
-| ...
-| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4.
-| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\
-| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\
-| ... | on RLOC interface or lisp_gpe0 interface.
-| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\
-| ... | DUT2 where it is forwarded to TG(if2).
-| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303.
-
-*** Variables ***
-| ${dut2_spi}= | ${1000}
-| ${dut1_spi}= | ${1001}
-| ${ESP_PROTO}= | ${50}
-| ${sock1}= | /tmp/sock1
-| ${sock2}= | /tmp/sock2
-| ${bid}= | 10
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\
-| | ... | Eth-IPv4-ICMPv4 on TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTs.
-| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - main fib
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup 3-node Topology
-| | And Add IP Neighbors
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | When VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
-| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4}
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
-| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\
-| | ... | Eth-IPv4-ICMPv4 on TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTs.
-| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup 3-node Topology
-| | And Add IP Neighbors
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index
-| | ... | ${dut1_node} | lisp_gpe0
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | When VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4}
-| | ... | ${tg2_ip4}
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4}
-| | ... | ${tg1_ip4}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int and VRF on EID is enabled.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\
-| | ... | Eth-IPv4-ICMPv4 on TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTs.
-| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - vrf, main fib
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup 3-node Topology | ${fib_table_1}
-| | And Add IP Neighbors | ${fib_table_1}
-| | When IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | ... | ${dut1_dut2_vni} | ${fib_table_1}
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
-| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4}
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
-| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC04: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int and VRF is enabled.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\
-| | ... | Eth-IPv4-ICMPv4 on TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTs.
-| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - vrf, main fib
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup 3-node Topology | ${fib_table_1}
-| | And Add IP Neighbors | ${fib_table_1}
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | ... | ${dut1_dut2_vni} | ${fib_table_1}
-| | When IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index
-| | ... | ${dut1_node} | lisp_gpe0
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4}
-| | ... | ${tg2_ip4}
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4}
-| | ... | ${tg1_ip4}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC05: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\
-| | ... | on TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\
-| | ... | between two vhosts.
-| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\
-| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node}
-| | ... | AND | Show VPP Settings | ${dut1_node}
-| | ... | AND | Show VPP Settings | ${dut2_node}
-| | ... | AND | Check VPP PID in Teardown
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup 3-node Topology
-| | And Add IP Neighbors
-| | And Setup Qemu DUT1
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | When VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
-| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4}
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
-| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC06: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\
-| | ... | Eth-IPv4-ICMPv4 on TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTS.
-| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib, virt2lisp\
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across\
-| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node}
-| | ... | AND | Show VPP Settings | ${dut1_node}
-| | ... | AND | Show VPP Settings | ${dut2_node}
-| | ... | AND | Check VPP PID in Teardown
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup 3-node Topology
-| | And Add IP Neighbors
-| | And Setup Qemu DUT1
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index
-| | ... | ${dut1_node} | lisp_gpe0
-| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.Get Sw If Index
-| | ... | ${dut2_node} | lisp_gpe0
-| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg}
-| | When VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
-| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4}
-| | And VPP Setup IPsec Manual Keyed Connection
-| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
-| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Setup 3-node Topology
-| | [Documentation]
-| | ... | Setup 3-node topology for this test suite. Set all physical\
-| | ... | interfaces up and assing IP adresses to them.\
-| | ... | You can specify fib table ID where the DUT-TG interfaces assign to.\
-| | ... | Default is 0.
-| | ...
-| | [Arguments] | ${fib_table}=0
-| | Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | Interfaces in 3-node path are up
-| | Assign Interface To Fib Table | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${fib_table}
-| | Assign Interface To Fib Table | ${dut2_node}
-| | ... | ${dut2_to_tg} | ${fib_table}
-| | Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4}
-| | ... | ${prefix4}
-| | Set Interface Address | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4}
-| | ... | ${prefix4}
-| | Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4}
-| | ... | ${prefix4}
-| | Set Interface Address | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4}
-| | ... | ${prefix4}
-
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.\
-| | ... | You can specify fib table ID for DUT-TG interfaces. Default is 0.
-| | ...
-| | [Arguments] | ${fib_id}=0
-| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| | ... | ${tg_to_dut1_mac} | ${fib_id}
-| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| | ... | ${tg_to_dut2_mac} | ${fib_id}
-| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_dut1_mac}
-| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | ... | ${dut1_to_dut2_mac}
-
-| Setup Qemu DUT1
-| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup \
-| | ... | Qemu and bridge the vhosts.
-| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1}
-| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2}
-| | Set Interface Address | ${dut1_node} | ${vhost2} | 6.6.1.9
-| | ... | ${prefix4}
-| | Set Interface State | ${dut1_node} | ${vhost1} | up
-| | Set Interface State | ${dut1_node} | ${vhost2} | up
-| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE}
-| | Interface is added to bridge domain | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${bid} | 0
-| | Interface is added to bridge domain | ${dut1_node}
-| | ... | ${vhost1} | ${bid} | 0
-| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
-| | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
-| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2}