CSIT-9: COP Whitelist/blacklist

- Included are also IPv6 tests
- JIRA: CSIT-17

Change-Id: I89ae6c38cdc6742a597c0dc24ed1c033c1b5d155
Signed-off-by: Zdeno <zolsovsk@cisco.com>

2 files changed, 225 insertions, 0 deletions

diff --git a/tests/suites/cop/cop_whitelist_blacklist.robot b/tests/suites/cop/cop_whitelist_blacklist.robot
new file mode 100644
index 0000000000..ad02b4c499
--- /dev/null
+++ b/tests/suites/cop/cop_whitelist_blacklist.robot
@@ -0,0 +1,105 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Resource | resources/libraries/robot/cop.robot
+| Resource | resources/libraries/robot/l2_xconnect.robot
+| Variables  | resources/libraries/python/IPv4NodeAddress.py | ${nodes}
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Suite Setup | Run Keywords | Setup all DUTs before test
+| ...         | AND          | Setup all TGs before traffic script
+| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
+| Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Show packet trace on all DUTs | ${nodes}
+| Documentation | *COP Blacklist and Whitelist Tests*
+| ...
+| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG
+| ... | with one link between nodes where DUT2 has xconnect.
+| ... | Test packets are sent only in one direction with COP set either as
+| ... | whitelist or blacklist. Subsequently, packet's IP src/dst and
+| ... | MAC addresses are checked.
+
+*** Variables ***
+| ${tg_node}= | ${nodes['TG']}
+| ${dut1_node}= | ${nodes['DUT1']}
+| ${dut2_node}= | ${nodes['DUT2']}
+
+| ${dut1_if1_ip}= | 192.168.1.1
+| ${dut1_if2_ip}= | 192.168.2.1
+| ${dut1_if1_ip_GW}= | 192.168.1.2
+| ${dut1_if2_ip_GW}= | 192.168.2.2
+
+| ${test_dst_ip}= | 32.0.0.1
+| ${test_src_ip}= | 16.0.0.1
+
+| ${cop_dut_ip}= | 16.0.0.0
+
+| ${ip_prefix}= | 24
+| ${nodes_ipv4_addresses}= | ${nodes_ipv4_addr}
+
+| ${fib_table_number}= | 1
+
+*** Test Cases ***
+| VPP permits packets based on IPv4 src addr
+| | [Documentation] | COP Whitelist test with basic setup.
+| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node}
+| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac}
+| | And Vpp Route Add | ${dut1_node}
+| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2}
+| | And Add fib table | ${dut1_node}
+| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | local
+| | When COP Add whitelist Entry
+| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${fib_table_number}
+| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable
+| | Then Send Packet And Check Headers | ${tg_node} |
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} |
+| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+
+
+| VPP drops packets based on IPv4 src addr
+| | [Documentation] | COP blacklist test with basic setup.
+| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node}
+| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac}
+| | And Vpp Route Add | ${dut1_node}
+| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2}
+| | And Add fib table | ${dut1_node}
+| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop
+| | When COP Add whitelist Entry
+| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${fib_table_number}
+| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable
+| | Then Send packet from Port to Port should failed | ${tg_node} |
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} |
+| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
diff --git a/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot b/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot
new file mode 100644
index 0000000000..a48ae01475
--- /dev/null
+++ b/tests/suites/cop/cop_whitelist_blacklist_IPv6.robot
@@ -0,0 +1,120 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Resource | resources/libraries/robot/cop.robot
+| Resource | resources/libraries/robot/l2_xconnect.robot
+| Variables  | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Suite Setup | Run Keywords | Setup all DUTs before test
+| ...         | AND          | Setup all TGs before traffic script
+| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
+| Test Setup | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Show packet trace on all DUTs | ${nodes}
+| Documentation | *COP Blacklist and Whitelist Tests*
+| ...
+| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG
+| ... | with one link between nodes where DUT2 has xconnect.
+| ... | Test packets are sent only in one direction with COP set either as
+| ... | whitelist or blacklist. Subsequently, packet's IP src/dst and
+| ... | MAC addresses are checked.
+
+*** Variables ***
+| ${tg_node}= | ${nodes['TG']}
+| ${dut1_node}= | ${nodes['DUT1']}
+| ${dut2_node}= | ${nodes['DUT2']}
+
+| ${dut1_if1_ip}= | 3ffe:62::1
+| ${dut1_if2_ip}= | 3ffe:63::1
+| ${dut1_if1_ip_GW}= | 3ffe:62::2
+| ${dut1_if2_ip_GW}= | 3ffe:63::2
+
+| ${dut2_if1_ip}= | 3ffe:72::1
+| ${dut2_if2_ip}= | 3ffe:73::1
+
+| ${test_dst_ip}= | 3ffe:64::1
+| ${test_src_ip}= | 3ffe:61::1
+
+| ${cop_dut_ip}= | 3ffe:61::
+
+| ${ip_prefix}= | 64
+
+| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr}
+
+| ${fib_table_number}= | 1
+
+*** Test Cases ***
+| VPP permits packets based on IPv6 src addr
+| | [Documentation] | COP Whitelist test with basic setup.
+| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node}
+| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_if1} | ${dut2_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_if2} | ${dut2_if2_ip} | ${ip_prefix}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac}
+| | And Vpp Route Add | ${dut1_node}
+| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | And Add fib table | ${dut1_node} | ${cop_dut_ip} | ${ip_prefix} |
+| | ... | ${fib_table_number} | local
+| | When COP Add whitelist Entry | ${dut1_node} | ${dut1_if1} | ip6 |
+| | ... | ${fib_table_number}
+| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable
+| | Then Send Packet And Check Headers | ${tg_node} |
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} |
+| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+
+
+| VPP drops packets based on IPv6 src addr
+| | [Documentation] | COP blacklist test with basic setup.
+| | Given Setup Nodes And Variables | ${tg_node} | ${dut1_node} | ${dut2_node}
+| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_if1} | ${dut2_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_if2} | ${dut2_if2_ip} | ${ip_prefix}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip_GW} | ${tg_if1_mac}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac}
+| | And Vpp Route Add | ${dut1_node}
+| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_if2}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | And Add fib table | ${dut1_node}
+| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop
+| | When COP Add whitelist Entry
+| | ... | ${dut1_node} | ${dut1_if1} | ip6 | ${fib_table_number}
+| | And COP interface enable or disable | ${dut1_node} | ${dut1_if1} | enable
+| | Then Send packet from Port to Port should failed | ${tg_node} |
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} |
+| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}