Add flow test suites

The comms DDP package needs to be installed to support all flow protocols

Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d

1 files changed, 119 insertions, 0 deletions

diff --git a/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot
new file mode 100644
index 0000000000..b5d3548e1d
--- /dev/null
+++ b/tests/vpp/device/flow/2n1l-10ge2p1x710-ethip4-flow-ip4-tcp-scapy.robot
@@ -0,0 +1,119 @@
+# Copyright (c) 2021 Intel and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | ETH | IP4FWD | FLOW | TCP | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4-flow-ip4-tcp
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | telemetry
+|
+| Test Template | Local Template
+|
+| Documentation | *IP4 flow test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1 2-node topology with one link\
+| ... | between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IP4-TCP.
+| ... | *[Cfg] DUT configuration:* DUT is configured with IP4 flow.
+| ... | *[Ver] TG verification:* Verify if the flow action is correct.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${0}
+| ${src_ip}= | 1.1.1.1
+| ${dst_ip}= | 2.2.2.2
+| ${rxq}= | ${4}
+# Telemetry
+| ${telemetry_profile}= | vpp_test_teardown
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IP4 packet routed over DUT1 interfaces.\
+| | ... | Make VPP verify flow packet is correct.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${rxq}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| |
+| | Clear Packet Trace On Dut | ${dut1}
+| | Vpp Enable Traces On Dut | ${dut1}
+| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1}
+| | ... | ${src_ip} | ${dst_ip} | proto=TCP
+| | ... | action=redirect-to-queue | value=${${rxq}-1}
+| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index}
+| | Then Send flow packet and verify action
+| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0]
+| | ... | flow_type=IP4 | proto=TCP
+| | ... | src_ip=${src_ip} | dst_ip=${dst_ip}
+| | ... | action=redirect-to-queue | action_value=${${rxq}-1}
+| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index}
+| | And Vpp Flow Del | ${dut1} | ${flow_index}
+| |
+| | Clear Packet Trace On Dut | ${dut1}
+| | Vpp Enable Traces On Dut | ${dut1}
+| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1}
+| | ... | ${src_ip} | ${dst_ip} | proto=TCP
+| | ... | action=drop
+| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index}
+| | Then Send flow packet and verify action
+| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0]
+| | ... | flow_type=IP4 | proto=TCP
+| | ... | src_ip=${src_ip} | dst_ip=${dst_ip}
+| | ... | action=drop
+| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index}
+| | And Vpp Flow Del | ${dut1} | ${flow_index}
+| |
+| | Clear Packet Trace On Dut | ${dut1}
+| | Vpp Enable Traces On Dut | ${dut1}
+| | ${flow_index} = | And Vpp Create Ip4 Flow | ${dut1}
+| | ... | ${src_ip} | ${dst_ip} | proto=TCP
+| | ... | action=mark | value=${7}
+| | And Vpp Flow Enable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index}
+| | Then Send flow packet and verify action
+| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_${int}1_mac}[0]
+| | ... | flow_type=IP4 | proto=TCP
+| | ... | src_ip=${src_ip} | dst_ip=${dst_ip}
+| | ... | action=mark
+| | And Vpp Flow Disable | ${dut1} | ${DUT1_${int}1}[0] | ${flow_index}
+| | And Vpp Flow Del | ${dut1} | ${flow_index}
+
+*** Test Cases ***
+| 64B-0c-ethip4-flow-ip4-tcp-scapy
+| | [Tags] | 64B | 0C
+| | frame_size=${64} | phy_cores=${0}