vpp_device: IPsec

- Remove VM ipsec tests as they are not interesting
- Remove duplicate (vpp_device/virl) VM tests
- Remove VM tunnel tests and use base tunnel (we do not need tunnel and VM)

Change-Id: I5d7b6d8a037878f81a6bdc0114af481b32141dde
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 0 insertions, 139 deletions

diff --git a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot
deleted file mode 100644
index 5b0dc9c0d5..0000000000
--- a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot
+++ /dev/null
@@ -1,139 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.IPv6Setup
-| Library | resources.libraries.python.VPPUtil
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Run Keywords | Set up functional test
-| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes}
-| ...
-| Test Teardown | Tear down LISP functional test with QEMU
-| ...
-| Documentation | *ip6-lispgpe-ip6 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
-| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, virt2lisp
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Add Fib Table | ${dut1_node} | ${fib_table_1} | ipv6=${TRUE}
-| | And Add Fib Table | ${dut2_node} | ${fib_table_1} | ipv6=${TRUE}
-| | And Assign Interface To Fib Table | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE}
-| | And Assign Interface To Fib Table | ${dut2_node}
-| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE}
-| | And Vpp Set If IPv6 Addr
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6}
-| | And Vpp Set If IPv6 Addr
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6}
-| | And Vpp Set If IPv6 Addr
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6}
-| | And Vpp Set If IPv6 Addr
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Add IP Neighbors
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Configure LISP GPE topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_to_dut2_ip6_static_adjacency}
-| | ... | ${dut2_to_dut1_ip6_static_adjacency}
-| | ... | ${dut1_dut2_vni} | ${fib_table_1}
-| | And Setup Qemu DUT1 | ${fib_table_1}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Setup Qemu DUT1
-| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\
-| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\
-| | ... | where the vhost2 interface should be assigned to.
-| | ...
-| | [Arguments] | ${fib_table}=0
-| | ...
-| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1}
-| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2}
-| | And Add Fib Table | ${dut1_node} | ${fib_table} | ipv6=${TRUE}
-| | Assign Interface To Fib Table | ${dut1_node}
-| | ... | ${vhost2} | ${fib_table} | ipv6=${TRUE}
-| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | ${vhost_ip}
-| | ... | ${prefix6}
-| | Set Interface State | ${dut1_node} | ${vhost1} | up
-| | Set Interface State | ${dut1_node} | ${vhost2} | up
-| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE}
-| | Add interface to bridge domain | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${bid} | 0
-| | Add interface to bridge domain | ${dut1_node}
-| | ... | ${vhost1} | ${bid} | 0
-| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
-| | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
-| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2}
-
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.
-| | ...
-| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6}
-| | ... | ${tg_to_dut1_mac}
-| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6}
-| | ... | ${tg_to_dut2_mac}
-| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_dut1_mac}
-| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
-| | ... | ${dut1_to_dut2_mac}