FIX: Naming convention compliance

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Idcee623abbc5568fc6ca49113bc2ff8add179046

1 files changed, 0 insertions, 121 deletions

diff --git a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3.robot b/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3.robot
deleted file mode 100644
index b2d3ff5751..0000000000
--- a/tests/vpp/perf/gso/2n1l-10ge2p1x710-ethip4-ip4base-2vhost-gso-iperf3.robot
+++ /dev/null
@@ -1,121 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-X710 | IP4FWD | BASE | IP4BASE | DRV_VHOST
-| ... | RXQ_SIZE_4096 | TXQ_SIZE_4096 | GSO_TRUE
-| ... | ethip4-ip4base-2vhost-gso
-|
-| Suite Setup | Setup suite topology interfaces
-| Suite Teardown | Tear down suite
-| Test Setup | Setup test
-| Test Teardown | Tear down test | iPerf3 | vhost
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases with VHOST*
-|
-| ... | *[Top] Network Topologies:* DUT1 1-node topology without physical links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing.
-| ... | *[Ver] TG verification:* iPerf3 client/server is used for Packet\
-| ... | generation and verification.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | ping_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vhost
-| ${nic_rxq_size}= | 4096
-| ${nic_txq_size}= | 4096
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L7
-| ${overhead}= | ${0}
-# Qemu settings:
-| ${enable_gso}= | ${True}
-| ${enable_csum}= | ${True}
-| ${nf_dtcr}= | ${1}
-| ${nf_dtc}= | ${4}
-# iPerf3 client settings:
-| ${iperf_client_bind}= | 1.1.1.1
-| ${iperf_client_bind_gw}= | 1.1.1.2
-| ${iperf_client_bind_mask}= | 30
-| ${iperf_client_interface}= | ens6
-| ${iperf_client_namespace}= | ${None}
-| ${iperf_client_udp}= | ${False}
-| ${iperf_client_node}= | DUT1_2
-| ${iperf_client_affinity} | 1
-# iPerf3 server settings:
-| ${iperf_server_bind}= | 2.2.2.2
-| ${iperf_server_bind_gw}= | 2.2.2.1
-| ${iperf_server_bind_mask}= | 30
-| ${iperf_server_interface}= | ens6
-| ${iperf_server_namespace}= | ${None}
-| ${iperf_server_node}= | DUT1_1
-| ${iperf_server_pf_key}= | ${None}
-# Trial data overwrite:
-| ${trial_duration}= | ${30}
-| ${trial_multiplicity}= | ${10}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT configuration: DUT1 is configured with IPv4 routing.
-| | ... | [Ver] Measure MaxReceivedRate for ${frame_size}B frames\
-| | ... | using burst trials throughput test.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| | Set Test Variable | \${rxq_ratio} | ${1}
-| |
-| | Given Set Jumbo
-| | And Add worker threads for GSO tests to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver} | validate=${False}
-| | And Initialize layer interface
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${DUT1_${int}1}[0]
-| | ... | ${iperf_server_bind_gw} | ${iperf_server_bind_mask}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${DUT1_${int}2}[0]
-| | ... | ${iperf_client_bind_gw} | ${iperf_client_bind_mask}
-| | And Configure chains of NFs connected via vhost-user on single node
-| | ... | node=DUT1 | nf_nodes=${2} | vnf=iperf3 | auto_scale=${True}
-| | ... | fixed_auto_scale=${True} | validate=${False}
-| | And Get CPU Info from All Nodes | ${nodes}
-| | Traffic should pass with maximum rate on iPerf3
-
-*** Test Cases ***
-| 128KB-1c-ethip4-ip4base-2vhost-gso-iperf3
-| | [Tags] | 128KB | 1C
-| | frame_size=${128000} | phy_cores=${1}
-
-| 128KB-2c-ethip4-ip4base-2vhost-gso-iperf3
-| | [Tags] | 128KB | 2C
-| | frame_size=${128000} | phy_cores=${2}
-
-| 128KB-4c-ethip4-ip4base-2vhost-gso-iperf3
-| | [Tags] | 128KB | 4C
-| | frame_size=${128000} | phy_cores=${4}