Create ip4-feature perf tests for 2-node topology

- ACL tests
- NAT44 tests
- iPoliceMarker tests

Jira: CSIT-1175, CSIT-1154

Change-Id: Ife7e7df50f7c1c8033bacdb7512e78be6bcdf4eb
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 134 insertions, 0 deletions

diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot
new file mode 100644
index 0000000000..5da19fe4fc
--- /dev/null
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot
@@ -0,0 +1,134 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Library | resources.libraries.python.Policer
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X710 | IP4FWD | BASE | POLICE_MARK
+| ...
+| Suite Setup | Set up 2-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down 2-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *Raw results IPv4 policer test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
+| ... | two IPv4 ARP entries and policer with 2R3C color-aware configuration.\
+| ... | Policer is applied on links TG - DUT1. DUT1 is tested with 2p10GE\
+| ... | NIC X710 by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per\
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header\
+| ... | and generated payload. MAC addresses are matching MAC addresses\
+| ... | of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
+
+*** Variables ***
+# X710 bandwidth limit
+| ${s_limit}= | ${10000000000}
+| ${cir}= | ${100}
+| ${eir}= | ${150}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | ...
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | ${cb} | ${framesize}
+| | Set Test Variable | ${eb} | ${framesize}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize IPv4 forwarding in circular topology
+| | And Initialize IPv4 policer 2r3c-'ca' in circular topology
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 64B | 1C
+| | framesize=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 64B | 2C
+| | framesize=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 64B | 4C
+| | framesize=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4-ip4base-ipolicemarkbase-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}