diff options
| author |   Peter Mikus <pmikus@cisco.com> | 2019-10-21 08:49:59 +0000 |
|---|---|---|
| committer | Peter Mikus <pmikus@cisco.com> | 2019-10-25 07:09:03 +0000 |
| commit | ac89ba8a39355a4a761508870ea0e08212ef7aee (patch) | |
| tree | 67383d5d7827390a448ba4afc48a36302437bd53 /tests/vpp/perf/ip4 | |
| parent | 23b5bfe679371df276db4713f6089655b0e9bc56 (diff) | |
Introduce pre-initialize driver layer
+ This will help unify driver base differences between TCs.
+ Decrease amount of logic needed for suite generator.
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I1e84ba361dc1e829f0612c58a61096e2633ce0c5
Diffstat (limited to 'tests/vpp/perf/ip4')
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot | 14 | 12 | ||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot | 15 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot | 16 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot | 16 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot | 16 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot | 13 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot | 14 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot | 13 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot | 12 | |||||||||
| -rw-r--r-- | tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot | 12 |
76 files changed, 576 insertions, 437 deletions
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot index ea891fd960..458d803f17 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -48,10 +48,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${4} | ${subid}= | 10 | ${tag_rewrite}= | pop-1 @@ -78,11 +79,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot index 6d239ef7ae..1c674be08c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 @@ -70,11 +71,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot index 3e16fdc1d9..8e390b1e67 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot index 95d63d49ab..69c057a857 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot index 3813edc59c..0b8e1b3ab1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot index 95a3a24cb8..ac57e127e2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -49,9 +49,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${4} | ${subid}= | 10 | ${tag_rewrite}= | pop-1 @@ -78,11 +79,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot index ac8c58338d..23c2c7aa29 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | And Add Fib Table | ${dut1} | 1 | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot index 90ffb67b10..2bbbf3a8ea 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | 255.255.255.0 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot index 58f8aa5dff..6f8cd34d10 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot @@ -16,7 +16,7 @@ | Library | resources.libraries.python.Policer | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK +| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${cir}= | ${100} | ${eir}= | ${150} @@ -77,11 +78,12 @@ | | Set Test Variable | \${cb} | ${frame_size} | | Set Test Variable | \${eb} | ${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | And Initialize IPv4 policer 2r3c-'ca' in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot index 408ab742cc..d73f1229f0 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -46,9 +46,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot index 6c465caca9..0ad036d756 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K +| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -46,9 +46,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot index 3d485d82f7..e44536ea2e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K +| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -46,9 +46,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot index 9fb8fe258d..1b4f86e821 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M +| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -46,9 +46,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot index 499478c43b..d9ef17a436 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL10 | 100_FLOWS +| ... | IACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot index 624bd3aa7b..22f3013603 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL10 | 100K_FLOWS +| ... | IACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot index ffd5768b29..59958af3fc 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL10 | 10K_FLOWS +| ... | IACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot index 9a17f8c974..528c3dd496 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL10 | 100_FLOWS +| ... | IACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot index cbc8432827..d1a34589da 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL10 | 100K_FLOWS +| ... | IACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot index a3e467e04d..47364ad625 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL10 | 10K_FLOWS +| ... | IACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot index e444f0f083..5e9eef1c5e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL1 | 100_FLOWS +| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot index 1e14af8b3f..1a0b3c431b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL1 | 100K_FLOWS +| ... | IACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index 66997c1fdc..b56d5fced3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL1 | 10K_FLOWS +| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -88,11 +89,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot index 7d25ff770c..014d631512 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL1 | 100_FLOWS +| ... | IACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot index 3d86088c2f..7c7d7cfd79 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL1 | 100K_FLOWS +| ... | IACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${ip_nr}= | ${100} # ACL test setup @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index 34b5498042..86bb72223c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL1 | 10K_FLOWS +| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -88,11 +89,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot index 7323167e85..b59a578cad 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 100_FLOWS +| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot index 11da0998d2..dc14b9b4f7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 100K_FLOWS +| ... | IACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index c22eb73392..652689d89c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 10K_FLOWS +| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -88,11 +89,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot index 5a82ff00ed..934b6453d3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 100_FLOWS +| ... | IACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot index 9058996bee..913df5142b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 100K_FLOWS +| ... | IACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index eec8247e29..f366f7e140 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 10K_FLOWS +| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -88,11 +89,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot index 4ce93086ca..61a9b2d4e7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot @@ -17,7 +17,7 @@ | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p @@ -73,12 +74,13 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot index 8284b6cfdf..ecc31963dd 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL10 | 100_FLOWS +| ... | OACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot index 75e6f8545d..807358f270 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL10 | 100K_FLOWS +| ... | OACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot index f9deb9f49c..85d286dd45 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL10 | 10K_FLOWS +| ... | OACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot index 188e99756c..06198e943c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL10 | 100_FLOWS +| ... | OACL | ACL10 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot index 46d3d8183a..deeafc9500 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL10 | 100K_FLOWS +| ... | OACL | ACL10 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot index 4a901bdab1..acd7c8778d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL10 | 10K_FLOWS +| ... | OACL | ACL10 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot index 475418138c..9e36cc0306 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL1 | 100_FLOWS +| ... | OACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot index a345e3140f..a36cd5c295 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL1 | 100K_FLOWS +| ... | OACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot index 182bbd38e4..88b94d219e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL1 | 10K_FLOWS +| ... | OACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot index 60391be0fa..f125e82ced 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL1 | 100_FLOWS +| ... | OACL | ACL1 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot index 864333647b..02dffe36bb 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL1 | 100K_FLOWS +| ... | OACL | ACL1 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot index b06819df0f..ea8c079296 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL1 | 10K_FLOWS +| ... | OACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot index 976726527d..0484f1cf9d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL50 | 100_FLOWS +| ... | OACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot index 1702f1f047..c9aba09d8a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL50 | 100K_FLOWS +| ... | OACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot index d606479e11..43fd243a88 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL50 | 10K_FLOWS +| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot index 37a30775b8..1048118144 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL50 | 100_FLOWS +| ... | OACL | ACL50 | 100_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot index 2a899b7a78..997b680c0e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL50 | 100K_FLOWS +| ... | OACL | ACL50 | 100K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot index eaa84a374f..854dbac89f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -72,7 +73,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot index e3e267f13e..6231328d25 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot @@ -13,11 +13,10 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | SRC_USER_1 +| ... | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -49,16 +48,17 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4udp-1u15p *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -73,12 +73,13 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot index c1c081e0ff..c3bcb033e6 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot @@ -13,12 +13,10 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_10 -| ... | SCALE +| ... | SCALE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -50,16 +48,17 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u15p *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -74,12 +73,13 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot index e74d204c2b..d0fa9e3a3e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot @@ -13,12 +13,10 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_100 -| ... | SCALE +| ... | SCALE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -50,16 +48,17 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4udp-100u15p *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -74,12 +73,13 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot index 85c68c5998..96a1e78946 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot @@ -13,12 +13,10 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1000 -| ... | SCALE +| ... | SCALE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -49,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4udp-1000u15p @@ -74,12 +73,13 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot index d9ef112ff7..e54597ab71 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot @@ -13,12 +13,10 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_2000 -| ... | SCALE +| ... | SCALE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -50,16 +48,17 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4udp-2000u15p *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -74,12 +73,13 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot index 78d2aab602..5f088c9af6 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot @@ -13,12 +13,10 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/nat.robot -| Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_4000 -| ... | SCALE +| ... | SCALE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -59,7 +57,7 @@ *** Keywords *** | Local Template -| | [Documentation] | FIXME. +| | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config. | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ @@ -74,12 +72,13 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot index d5ac16656e..e9bde213c9 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -48,10 +48,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${4} | ${subid}= | 10 | ${tag_rewrite}= | pop-1 @@ -78,11 +79,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot index 9b149c8512..cee94c2ff4 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4base-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253 @@ -70,11 +71,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot index 69df2c4fd2..e1f374d6c7 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale200k-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200k | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot index 4db460a8d3..0423a28ee3 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale20k-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20k | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot index 03fa8384ad..918e1d85a4 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-ethip4-ip4scale2m-ndrpdr.robot @@ -18,7 +18,7 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_AVF | ... | Suite Setup | Setup suite single link | performance_avf -| Suite Teardown | Tear down suite | performance | vifs +| Suite Teardown | Tear down suite | performance | Test Setup | Setup test | Test Teardown | Tear down test | performance | ... @@ -45,10 +45,11 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so -| ${osi_layer}= | L3 +| @{plugins_to_enable}= | avf_plugin.so +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | avf +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} # Traffic profile: @@ -72,11 +73,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add DPDK no PCI to all DUTs -| | And Set Max Rate And Jumbo +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot index d6f7c25c1c..d4a6342eb5 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${4} | ${subid}= | 10 | ${tag_rewrite}= | pop-1 @@ -77,11 +78,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot index 7a168aaf83..0b280537dd 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253 @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | And Add Fib Table | ${dut1} | 1 | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot index 6553888b22..ec6f6d24f6 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253 @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | 255.255.255.0 diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot index d7ed461d74..9e40dac35d 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK +| ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -46,9 +46,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${cir}= | ${100} | ${eir}= | ${150} @@ -75,11 +76,12 @@ | | Set Test Variable | \${cb} | ${frame_size} | | Set Test Variable | \${eb} | ${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | And Initialize IPv4 policer 2r3c-'ca' in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot index 0b44a6249e..6e27f03738 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -46,9 +46,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253 @@ -70,11 +71,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot index 2b78f27af0..eb2303fe22 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200k +| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200k | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -45,9 +45,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} # Traffic profile: @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot index 28eafa7a09..791c0e0993 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20k +| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20k | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -45,9 +45,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} # Traffic profile: @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot index 8a25d47202..e0ade7e83a 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot @@ -15,7 +15,7 @@ | Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M +| ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -45,9 +45,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} # Traffic profile: @@ -71,11 +72,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index a6fb17a459..379dedc38a 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL1 | 10K_FLOWS +| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index 07f89c7b05..2044275651 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL1 | 10K_FLOWS +| ... | IACL | ACL1 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index 203193e32e..baddcd098c 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 10K_FLOWS +| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index 5a224d7351..1405611e6e 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | IACL | ACL50 | 10K_FLOWS +| ... | IACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot index 90262b5e1e..3ad106cfaf 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot @@ -17,7 +17,7 @@ | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE +| ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -48,9 +48,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4udp-1u1p @@ -73,12 +74,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg -| | And Add NAT to all DUTs +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize NAT44 in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot index 702227be3e..9f600e3d55 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL -| ... | OACL | ACL50 | 10K_FLOWS +| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot index dd03c224b5..95537602a3 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot @@ -16,7 +16,7 @@ | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS -| ... | OACL | ACL50 | 10K_FLOWS +| ... | OACL | ACL50 | 10K_FLOWS | DRV_VFIO_PCI | ... | Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance @@ -47,9 +47,10 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so -| ${osi_layer}= | L3 +| ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci +| ${osi_layer}= | L3 | ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit @@ -87,11 +88,12 @@ | | ... | | Set Test Variable | \${frame_size} | | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | And Set Max Rate And Jumbo And Handle Multi Seg +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface | | And Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology | | ... | ${ip_nr} | | Then Find NDR and PDR intervals using optimized search |