CSIT-1097: Migrate L2 to NDRPDR and edit MRR

Change-Id: I738d1794f795e1225bc9709ea2ed2cf9b06d1cf4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 139 insertions, 0 deletions

diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr.robot
new file mode 100644
index 0000000000..278c5e343a
--- /dev/null
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr.robot
@@ -0,0 +1,139 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
+| ... | IACL | ACL1 | 100k_FLOWS
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L2
+| ... | Intel-X520-DA2
+| ... | AND | Set up performance test suite with ACL
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down mrr test with MACIP ACL
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *Raw results L2BD test cases with ACL*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
+| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
+| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
+| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\
+| ... | Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
+| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
+| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
+| ... | node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+
+# ACL test setup
+| ${acl_action}= | permit
+| ${no_hit_aces_number}= | 1
+| ${flows_per_dir}= | 100k
+
+# starting points for non-hitting ACLs
+| ${src_ip_start}= | 30.30.30.1
+| ${ip_step}= | ${1}
+| ${src_mac_start}= | 01:02:03:04:05:06
+| ${src_mac_step}= | ${1000}
+| ${src_mac_mask}= | 00:00:00:00:00:00
+| ${tg_stream1_mac}= | ca:fe:00:00:00:00
+| ${tg_stream2_mac}= | fa:ce:00:00:00:00
+| ${tg_mac_mask}= | ff:ff:ff:fe:00:00
+| ${tg_stream1_subnet}= | 10.0.0.0/15
+| ${tg_stream2_subnet}= | 20.0.0.0/15
+
+# traffic profile
+| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100kip4src100k
+
+*** Keywords ***
+| Local Template
+| | [Documentation] | FIXME.
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_limit} | ${framesize}
+| | And Apply startup configuration on all VPP DUTs
+| | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 64B | 1C
+| | framesize=${64} | phy_cores=${1}
+
+| tc02-64B-2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 64B | 2C
+| | framesize=${64} | phy_cores=${2}
+
+| tc03-64B-4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 64B | 4C
+| | framesize=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}