diff options
Diffstat (limited to 'resources/libraries/robot/performance')
| -rw-r--r-- | resources/libraries/robot/performance/performance_configuration.robot | 654 | ||||
| -rw-r--r-- | resources/libraries/robot/performance/performance_utils.robot | 15 |
2 files changed, 3 insertions, 666 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 09382d736e..7c7c7bbceb 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -12,578 +12,9 @@ # limitations under the License. *** Settings *** -| Library | resources.libraries.python.DpdkUtil -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.TestConfig -| Library | resources.libraries.python.TrafficGenerator -| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl -| Library | resources.libraries.python.VhostUser -| ... | Documentation | Performance suite keywords - configuration *** Keywords *** -| Initialize IPSec in 3-node circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP -| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG and -| | ... | DUT1-DUT2 links. Set routing for encrypted traffic on both DUT nodes -| | ... | with prefix /8 and next hop of neighbour DUT or TG interface IPv4 -| | ... | address. -| | ... -| | Set interfaces in path up -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} -| | ... | ${dut1_if1_ip4} | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} -| | ... | ${dut2_if2_ip4} | 24 -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip4} | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip4} | ${tg_if2_mac} -| | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | gateway=${tg_if1_ip4} -| | ... | interface=${dut1_if1} -| | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4} -| | ... | interface=${dut2_if2} - -| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node -| | ... | circular topology. In case of 3-node topology create VLAN -| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN -| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses -| | ... | and setup ARPs. Setup IPv6 addresses with /64 prefix on DUT-TG links -| | ... | and set routing with prefix /64. In case of 3-node set IPv6 adresses -| | ... | with /64 prefix on VLAN and set routing on both DUT nodes with prefix -| | ... | /64. Set next hop of neighbour DUT interface IPv6 address. All -| | ... | interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - tg_if1_net - TG interface 1 IPv6 subnet used by traffic generator. -| | ... | Type: integer -| | ... | - tg_if2_net - TG interface 2 IPv6 subnet used by traffic generator. -| | ... | Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces\ -| | ... | in circular topology \| 2001:1::0 \| 2001:2::0 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | ${prefix}= | Set Variable | 64 -| | ${host_prefix}= | Set Variable | 64 -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut1} | ${subif_index_1} | 2002:2::2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut2} | ${subif_index_2} | 2002:2::1 | ${dut1_if2_mac} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${subif_index_1} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg_if2_mac} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1} | 2002:2::1 -| | ... | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2 -| | ... | ${prefix} -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} -| | ... | gateway=2002:1::1 | interface=${dut1_if1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix} -| | ... | gateway=2002:2::2 | interface=${subif_index_1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix} -| | ... | gateway=2002:2::1 | interface=${subif_index_2} -| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix} -| | ... | gateway=2002:3::1 | interface=${dut_if2} - -| Initialize IPv6 forwarding over SRv6 with encapsulation with '${n}' x SID '${prepos}' decapsulation in 3-node circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular -| | ... | topology. Get the interface MAC addresses and setup neighbours on all -| | ... | VPP interfaces. Setup IPv6 addresses on all interfaces. Set segment -| | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes -| | ... | on both DUT nodes. -| | ... -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2 -| | | ${hexa_nr}= | Convert To Hex | ${number} -| | | VPP Add IP Neighbor | ${dut1} -| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg_if1_mac} -| | | VPP Add IP Neighbor | ${dut2} -| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg_if2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} -| | ${sid1}= | Set Variable If -| | ... | "${n}" == "1" | ${dut2_sid1} -| | ... | "${n}" == "2" | ${dut2_sid1_1} -| | ${sid2}= | Set Variable If -| | ... | "${n}" == "1" | ${dut1_sid2} -| | ... | "${n}" == "2" | ${dut1_sid2_1} -| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | gateway=${dut2_if1_ip6} -| | ... | interface=${dut1_if2} -| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | gateway=${dut1_if2_ip6} -| | ... | interface=${dut2_if1} -# Configure SRv6 for direction0 -| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} -| | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1" -| | ... | Create List | ${dut2_sid1} -| | ... | ELSE IF | "${n}" == "2" -| | ... | Create List | ${dut2_sid1_1} | ${dut2_sid1_2} -| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap -| | ... | @{sid_list_dir0} -| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} -| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} -| | Run Keyword If | "${n}" == "1" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.dx6 -| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_1} | end -| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_2} | end.dx6 -| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" -| | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix} -| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} -# Configure SRv6 for direction1 -| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} -| | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1" -| | ... | Create List | ${dut1_sid2} -| | ... | ELSE IF | "${n}" == "2" -| | ... | Create List | ${dut1_sid2_1} | ${dut1_sid2_2} -| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap -| | ... | @{sid_list_dir1} -| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} -| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} -| | Run Keyword If | "${n}" == "1" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.dx6 -| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_1} | end -| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_2} | end.dx6 -| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2 -| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" -| | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} -| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} -| | Set interfaces in path up - -| Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology -| | [Documentation] -| | ... | Create pair of Memif interfaces on all defined VPP nodes. Set UP -| | ... | state on VPP interfaces in path on nodes in 3-node circular topology. -| | ... | Get the interface MAC addresses and setup neighbours on all VPP -| | ... | interfaces. Setup IPv6 addresses on all interfaces. Set segment -| | ... | routing for IPv6 with defined behaviour function and configure IPv6 -| | ... | routes on both DUT nodes. -| | ... -| | ... | *Note:* -| | ... | KW uses test variable rxq_count_int set by KW Add worker threads -| | ... | and rxqueues to all DUTs -| | ... -| | ${sock1}= | Set Variable | memif-DUT1_CNF -| | ${sock2}= | Set Variable | memif-DUT2_CNF -| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} -| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if1} -| | VPP Set interface MTU | ${dut1} | ${dut1-memif-1-if2} -| | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} -| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1} -| | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2} -| | :FOR | ${dut} | IN | @{duts} -| | | Show Memif | ${nodes['${dut}']} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} -| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if1} -| | ... | ${dut1-memif-1-if1_ip6} | ${mem_prefix} -| | VPP Interface Set IP Address | ${dut1} | ${dut1-memif-1-if2} -| | ... | ${dut1-memif-1-if2_ip6} | ${mem_prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} -| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if1} -| | ... | ${dut2-memif-1-if1_ip6} | ${mem_prefix} -| | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if2} -| | ... | ${dut2-memif-1-if2_ip6} | ${mem_prefix} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg_if2_mac} -| | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 -| | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 -| | VPP Add IP Neighbor | ${dut1} -| | ... | ${dut1-memif-1-if1} | ${dut1_nh} | ${dut1-memif-1-if2_mac} -| | VPP Add IP Neighbor | ${dut2} -| | ... | ${dut2-memif-1-if1} | ${dut2_nh} | ${dut2-memif-1-if2_mac} -| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} -| | ... | gateway=${dut2_if1_ip6} | interface=${dut1_if2} -| | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix} -| | ... | gateway=${tg_if1_ip6_subnet}2 | interface=${dut1_if1} -| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} -| | ... | gateway=${dut1_if2_ip6} | interface=${dut2_if1} -| | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix} -| | ... | gateway=${tg_if2_ip6_subnet}2 | interface=${dut2_if2} -# Configure SRv6 for direction0 on DUT1 -| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} -| | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1} -| | ... | ${out_sid1_2} -| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap -| | ... | @{sid_list_dir0} -| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} -| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} -# Configure SRv6 for direction1 on DUT2 -| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} -| | @{sid_list_dir1}= | Create List | ${dut1_sid2} | ${out_sid2_1} -| | ... | ${out_sid2_2} -| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap -| | ... | @{sid_list_dir1} -| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} -| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} -# Configure SRv6 for direction0 on DUT2 -| | ${dut2_out_if}= | Get Interface Name | ${dut2} | memif1 -| | ${dut2_in_if}= | Get Interface Name | ${dut2} | memif2 -| | Remove Values From List | ${sid_list_dir0} | ${dut2_sid1} -| | Run Keyword If | "${behavior}" == "static_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.as -| | ... | ${NONE} | ${dut2_nh} | ${NONE} | ${dut2_out_if} | ${dut2_in_if} -| | ... | ${dut1_sid1} | @{sid_list_dir0} -| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.ad -| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} -| | ... | ELSE IF | "${behavior}" == "masquerading" -| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.am -| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} -| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} -# Configure SRv6 for direction1 on DUT1 -| | ${dut1_out_if}= | Get Interface Name | ${dut1} | memif1 -| | ${dut1_in_if}= | Get Interface Name | ${dut1} | memif2 -| | Remove Values From List | ${sid_list_dir1} | ${dut1_sid2} -| | Run Keyword If | "${behavior}" == "static_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.as -| | ... | ${NONE} | ${dut1_nh} | ${NONE} | ${dut1_out_if} | ${dut1_in_if} -| | ... | ${dut2_sid2} | @{sid_list_dir1} -| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.ad -| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} -| | ... | ELSE IF | "${behavior}" == "masquerading" -| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.am -| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} -| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} -| | Set interfaces in path up - -| Configure IPv4 ACLs -| | [Documentation] -| | ... | Configure ACL with required number of not-hitting permit ACEs plus two -| | ... | hitting ACEs for both traffic directions. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - DUT node. Type: dictionary -| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string -| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - src_ip_start - Source IP address start. Type: string -| | ... | - dst_ip_start - Destination IP address start. Type: string -| | ... | - ip_step - IP address step. Type: string -| | ... | - sport_start - Source port number start. Type: string -| | ... | - dport_start - Destination port number start. Type: string -| | ... | - port_step - Port number step. Type: string -| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. -| | ... | Type: integer -| | ... | - acl_apply_type - To what path apply the ACL - input or output. -| | ... | Type: string -| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. -| | ... | Type: string -| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1. -| | ... | Type: string -| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0. -| | ... | Type: string -| | ... -| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} -| | ${src_ip_int} = | Evaluate -| | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step -| | ... | modules=ipaddress -| | ${dst_ip_int} = | Evaluate -| | ... | int(ipaddress.ip_address(unicode($dst_ip_start))) - $ip_step -| | ... | modules=ipaddress -| | ${ip_limit} = | Set Variable | 255.255.255.255 -| | ${ip_limit_int} = | Evaluate -| | ... | int(ipaddress.ip_address(unicode($ip_limit))) | modules=ipaddress -| | ${sport}= | Evaluate | $sport_start - $port_step -| | ${dport}= | Evaluate | $dport_start - $port_step -| | ${port_limit}= | Set Variable | ${65535} -| | ${acl}= | Set Variable | ipv4 permit -| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} -| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step -| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step -| | | ${sport}= | Evaluate | $sport + $port_step -| | | ${dport}= | Evaluate | $dport + $port_step -| | | ${ipv4_limit_reached}= | Set Variable If -| | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int -| | | ... | ${TRUE} -| | | ${udp_limit_reached}= | Set Variable If -| | | ... | $sport > $port_limit or $dport > $port_limit | ${TRUE} -| | | Run Keyword If | $ipv4_limit_reached is True | Log -| | | ... | Can't do more iterations - IPv4 address limit has been reached. -| | | ... | WARN -| | | Run Keyword If | $udp_limit_reached is True | Log -| | | ... | Can't do more iterations - UDP port limit has been reached. -| | | ... | WARN -| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int)) -| | | ... | modules=ipaddress -| | | ${dst_ip} = | Run Keyword If | $ipv4_limit_reached is True -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($dst_ip_int)) -| | | ... | modules=ipaddress -| | | ${sport}= | Set Variable If | ${sport} > $port_limit | $port_limit -| | | ... | ${sport} -| | | ${dport}= | Set Variable If | ${dport} > $port_limit | $port_limit -| | | ... | ${dport} -| | | ${acl}= | Catenate | ${acl} | src ${src_ip}/32 dst ${dst_ip}/32 -| | | ... | sport ${sport} | dport ${dport}, -| | | Exit For Loop If -| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True -| | ${acl}= | Catenate | ${acl} -| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet}, -| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet} -| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} -| | @{acl_list}= | Create List | ${0} -| | Run Keyword If | 'input' in $acl_apply_type and $dut_if1 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | input | ${acl_list} -| | Run Keyword If | 'input' in $acl_apply_type and $dut_if2 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | input | ${acl_list} -| | Run Keyword If | 'output' in $acl_apply_type and $dut_if1 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | output -| | ... | ${acl_list} -| | Run Keyword If | 'output' in $acl_apply_type and $dut_if2 is not None -| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | output -| | ... | ${acl_list} - -| Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node -| | ... | circular topology. Get the interface MAC addresses and setup ARP on -| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG -| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix -| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24 -| | ... | and next hop of neighbour DUT interface IPv4 address. -| | ... | Apply required ACL rules to DUT1 interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - ip_nr - Number of IPs to be used. Type: integer or string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv4 routing for '10' addresses with IPv4 ACLs on DUT1 \ -| | ... | in 3-node circular topology \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - tg - TG node. -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - tg_if1 - TG interface 1 towards DUT1. -| | ... | - tg_if2 - TG interface 2 towards DUT2 (3-node topo) or DUT1 -| | ... | (2-node topo). -| | ... | - dut1_if1 - DUT1 interface 1 towards TG. -| | ... | - dut1_if2 - DUT1 interface 2 towards DUT2 (3-node topo) or TG -| | ... | (2-node topo). -| | ... | - dut2_if1 - DUT2 interface 1 towards DUT1. -| | ... | - dut2_if2 - DUT2 interface 2 towards TG. -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | ... -| | Set interfaces in path up -| | ... -| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2 -| | | VPP Add IP Neighbor -| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac} -| | | VPP Add IP Neighbor -| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} -| | ... -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24 -| | VPP Interface Set IP Address -| | ... | ${dut} | ${dut_if2} | 20.20.20.1 | 24 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30 -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2 -| | ... | interface=${dut1_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1 -| | ... | interface=${dut2_if1} -| | ... -| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Configure MACIP ACLs -| | [Documentation] -| | ... | Configure MACIP ACL with required number of not-hitting permit ACEs -| | ... | plus two hitting ACEs for both traffic directions. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - DUT node. Type: dictionary -| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string -| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure MACIP ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - src_ip_start - Source IP address start. Type: string -| | ... | - ip_step - IP address step. Type: string -| | ... | - src_mac_start - Source MAC address start in format with colons. -| | ... | Type: string -| | ... | - src_mac_step - Source MAC address step. Type: string -| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a -| | ... | wildcard mask. Type: string -| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. -| | ... | Type: integer -| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. -| | ... | Type: string -| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1. -| | ... | Type: string -| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0. -| | ... | Type: string -| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1. -| | ... | Type: string -| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2. -| | ... | Type: string -| | ... | - tg_mac_mask - MAC address mask for traffic streams. -| | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string -| | ... -| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} -| | ... -| | ${src_ip_int} = | IP To Int | ${src_ip_start} -| | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step} -| | ... -| | ${ip_limit} = | Set Variable | 255.255.255.255 -| | ${ip_limit_int} = | IP To Int | ${ip_limit} -| | ... -| | ${src_mac_int} = | Mac To Int | ${src_mac_start} -| | ${src_mac_int} = | Evaluate | ${src_mac_int} - ${src_mac_step} -| | ... -| | ${mac_limit} = | Set Variable | ff:ff:ff:ff:ff:ff -| | ${mac_limit_int} = | Mac To Int | ${mac_limit} -| | ... -| | ${acl}= | Set Variable | ipv4 permit -| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} -| | | ${src_ip_int} = | Evaluate | ${src_ip_int} + ${ip_step} -| | | ${src_mac_int} = | Evaluate | ${src_mac_int} + ${src_mac_step} -| | | ${ipv4_limit_reached}= | Set Variable If -| | | ... | ${src_ip_int} > ${ip_limit_int} | ${TRUE} -| | | ${mac_limit_reached}= | Set Variable If -| | | ... | ${src_mac_int} > ${mac_limit_int} | ${TRUE} -| | | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' | Log -| | | ... | Can't do more iterations - IPv4 address limit has been reached. -| | | ... | WARN -| | | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' | Log -| | | ... | Can't do more iterations - MAC address limit has been reached. -| | | ... | WARN -| | | ${src_ip} = | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' -| | | ... | Set Variable | ${ip_limit} -| | | ... | ELSE | Int To IP | ${src_ip_int} -| | | ${src_mac}= | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' -| | | ... | Set Variable | ${mac_limit} -| | | ... | ELSE | Int To Mac | ${src_mac_int} -| | | ${acl}= | Catenate | ${acl} | ip ${src_ip}/32 -| | | ... | mac ${src_mac} | mask ${src_mac_mask}, -| | | Exit For Loop If | '${ipv4_limit_reached}' == '${TRUE}' or '${mac_limit_reached}' == '${TRUE}' -| | ${acl0}= | Catenate | ${acl} -| | ... | ipv4 ${acl_action} ip ${tg_stream1_subnet} mac ${tg_stream1_mac} -| | ... | mask ${tg_mac_mask} -| | ${acl1}= | Catenate | ${acl} -| | ... | ipv4 ${acl_action} ip ${tg_stream2_subnet} mac ${tg_stream2_mac} -| | ... | mask ${tg_mac_mask} -| | Add Macip Acl Multi Entries | ${dut} | rules=${acl0} -| | Add Macip Acl Multi Entries | ${dut} | rules=${acl1} -| | ${acl_idx}= | Set Variable | 0 -| | Run Keyword Unless | '${dut_if1}' == '${NONE}' -| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if1} | add | ${acl_idx} -| | ${acl_idx}= | Set Variable | 1 -| | Run Keyword Unless | '${dut_if2}' == '${NONE}' -| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx} - | Initialize LISP IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ | | ... | Don`t set route. @@ -782,88 +213,3 @@ | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac} | | VPP Add IP Neighbor | | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address} | ${dut1_if2_mac} - -| Initialize NAT44 in circular topology -| | [Documentation] | Initialization of 2-node / 3-node topology with NAT44 -| | ... | between DUTs: -| | ... | - set interfaces up -| | ... | - set IP addresses -| | ... | - set ARP -| | ... | - create routes -| | ... | - set NAT44 - only on DUT1 -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} -| | ... | 11.0.0.1 | 20 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} -| | ... | 11.0.0.2 | 20 -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 12.0.0.1 | 20 -| | ... -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 12.0.0.2 | ${tg_if2_mac} -| | ... -| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | gateway=10.0.0.2 -| | ... | interface=${dut1_if1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | gateway=11.0.0.2 -| | ... | interface=${dut1_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | gateway=12.0.0.2 -| | ... | interface=${dut2_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | gateway=11.0.0.1 -| | ... | interface=${dut2_if1} -| | ... -| | Configure inside and outside interfaces -| | ... | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure deterministic mode for NAT44 -| | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 - -| Configure ACLs on a single interface -| | [Documentation] -| | ... | Configure ACL -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - dut_if - DUT node interface name. Type: string -| | ... | - acl_apply_type - To what path apply the ACL - input or output. -| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. -| | ... | - subnets - Subnets to apply the specific ACL. Type: list -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} -| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 -| | ... -| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} -| | ... | @{subnets} -| | Set Test variable | ${acl} | ${EMPTY} -| | :FOR | ${subnet} | IN | @{subnets} -| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}' -| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} -| | | ... | ELSE -| | | ... | Catenate | SEPARATOR=", " | ${acl} -| | | ... | ipv4 ${acl_action} src ${subnet} -| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} -| | @{acl_list} = | Create List | ${0} -| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} -| | ... | ${acl_list} diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index 8507ae68f5..7f971378e3 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -23,18 +23,9 @@ | Library | resources.libraries.python.TrafficGenerator.OptimizedSearch | Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl | Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/container.robot -| Resource | resources/libraries/robot/shared/memif.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Documentation | Performance suite keywords - utilities to find and verify NDR -| ... | and PDR. +| ... +| Documentation +| ... | Performance suite keywords - utilities to find and verify NDR and PDR. *** Keywords *** | Find NDR and PDR intervals using optimized search |