diff options
Diffstat (limited to 'resources/libraries')
| -rw-r--r-- | resources/libraries/bash/entry/per_patch_perf.sh | 2 | ||||
| -rw-r--r-- | resources/libraries/bash/function/common.sh | 14 | ||||
| -rw-r--r-- | resources/libraries/bash/function/per_patch.sh | 219 |
3 files changed, 209 insertions, 26 deletions
diff --git a/resources/libraries/bash/entry/per_patch_perf.sh b/resources/libraries/bash/entry/per_patch_perf.sh index 4a756d2c25..b1854992e2 100644 --- a/resources/libraries/bash/entry/per_patch_perf.sh +++ b/resources/libraries/bash/entry/per_patch_perf.sh @@ -74,14 +74,12 @@ for ((iter=0; iter<iterations; iter++)); do check_download_dir || die run_robot || die archive_parse_test_results "csit_current/${iter}" || die - die_on_robot_error || die # TODO: Use less heavy way to avoid apt remove failures. ansible_playbook "cleanup" || die select_build "build_parent" || die check_download_dir || die run_robot || die archive_parse_test_results "csit_parent/${iter}" || die - die_on_robot_error || die done untrap_and_unreserve_testbed || die compare_test_results # The error code becomes this script's error code. diff --git a/resources/libraries/bash/function/common.sh b/resources/libraries/bash/function/common.sh index fc019facda..b209958194 100644 --- a/resources/libraries/bash/function/common.sh +++ b/resources/libraries/bash/function/common.sh @@ -533,6 +533,8 @@ function get_test_tag_string () { # Variables set: # - TEST_TAG_STRING - The string following trigger word in gerrit comment. # May be empty, or even not set on event types not adding comment. + # Variables exported optionally: + # - GRAPH_NODE_VARIANT - Node variant to test with, set if found in trigger. # TODO: ci-management scripts no longer need to perform this. @@ -1074,19 +1076,15 @@ function select_tags () { TAGS=() prefix="" - - set +x if [[ "${TEST_CODE}" == "vpp-"* ]]; then if [[ "${TEST_CODE}" != *"device"* ]]; then - # Automatic prefixing for VPP perf jobs to limit the NIC used and - # traffic evaluation to MRR. - if [[ "${TEST_TAG_STRING-}" == *"nic_"* ]]; then - prefix="${prefix}mrrAND" - else - prefix="${prefix}mrrAND${default_nic}AND" + # Automatic prefixing for VPP perf jobs to limit the NIC used. + if [[ "${TEST_TAG_STRING-}" != *"nic_"* ]]; then + prefix="${default_nic}AND" fi fi fi + set +x for tag in "${test_tag_array[@]}"; do if [[ "${tag}" == "!"* ]]; then # Exclude tags are not prefixed. diff --git a/resources/libraries/bash/function/per_patch.sh b/resources/libraries/bash/function/per_patch.sh index c7fda38118..0cf7a6503d 100644 --- a/resources/libraries/bash/function/per_patch.sh +++ b/resources/libraries/bash/function/per_patch.sh @@ -55,12 +55,12 @@ function archive_parse_test_results () { # Functions called: # - die - Print to stderr and exit, defined in common.sh # - archive_test_results - Archiving results. - # - parse_bmrr_results - See definition in this file. + # - parse_results - See definition in this file. set -exuo pipefail archive_test_results "$1" || die - parse_bmrr_results "${TARGET}" || { + parse_results "${TARGET}" || { die "The function should have died on error." } } @@ -115,7 +115,6 @@ function compare_test_results () { # of parent build. # Functions called: # - die - Print to stderr and exit, defined in common.sh - # - parse_bmrr_results - See definition in this file. # Exit code: # - 0 - If the comparison utility sees no regression (nor data error). # - 1 - If the comparison utility sees a regression (or data error). @@ -153,10 +152,17 @@ function initialize_csit_dirs () { } -function parse_bmrr_results () { +function parse_results () { - # Currently "parsing" is just two greps. - # TODO: Re-use PAL parsing code, make parsing more general and centralized. + # Currently "parsing" is just few greps on output.xml. + # TODO: Parse json outputs properly. + # + # The current implementation attempts to parse for BMRR, PDR and passrate. + # If failures are present, they are reported as fake throughput values, + # enabling bisection to focus on the cause (or the fix) of the failures. + # + # The fake values are created with MRR multiplicity, + # otherwise jumpavg (which dislikes short groups) could misclassify them. # # Arguments: # - ${1} - Path to (existing) directory holding robot output.xml result. @@ -164,22 +170,203 @@ function parse_bmrr_results () { # - output.xml - From argument location. # Files updated: # - results.txt - (Re)created, in argument location. + # Variables read: + # - CSIT_PERF_TRIAL_MULTIPLICITY - To create fake results of this length. # Functions called: # - die - Print to stderr and exit, defined in common.sh + # - parse_results_mrr - See definition in this file. + # - parse_results_ndrpdr - See definition in this file. + # - parse_results_passrate - See definition in this file. + # - parse_results_soak - See definition in this file. set -exuo pipefail rel_dir="$(readlink -e "${1}")" || die "Readlink failed." - in_file="${rel_dir}/output.xml" - out_file="${rel_dir}/results.txt" - # TODO: Do we need to check echo exit code explicitly? - echo "Parsing ${in_file} putting results into ${out_file}" - echo "TODO: Re-use parts of PAL when they support subsample test parsing." - pattern='Maximum Receive Rate trial results in .*' - pattern+=' per second: .*\]</status>' - grep -o "${pattern}" "${in_file}" | grep -o '\[.*\]' > "${out_file}" || { - die "Some parsing grep command has failed." - } + in_file="${rel_dir}/output.xml" || die + out_file="${rel_dir}/results.txt" || die + echo "Parsing ${in_file} putting results into ${out_file}" || die + # Frst attempt: (B)MRR. + if parse_results_mrr "${in_file}" "${out_file}"; then + return 0 + fi + # BMRR parsing failed. Attempt PDR/NDR. + if parse_results_ndrpdr "${in_file}" "${out_file}"; then + return 0 + fi + # PDR/NDR parsing failed. Attempt soak. + if parse_results_soak "${in_file}" "${out_file}"; then + return 0 + fi + # Soak parsing failed. + # Probably not a perf test at all (or a failed one), + # but we can still bisect by passrate. + parse_results_passrate "${in_file}" "${out_file}" || die +} + + +function parse_results_mrr () { + + # Parse MRR test message(s) into JSON-readable output. + # + # Return non-zero if parsing fails. + # + # Arguments: + # - ${1} - Path to (existing) input file. Required. + # - ${2} - Path to (overwritten if exists) output file. Required. + # Files read: + # - output.xml - The input file from argument location. + # Files updated: + # - results.txt - (Re)created, in argument location. + # Functions called: + # - die - Print to stderr and exit, defined in common.sh + + set -exuo pipefail + + in_file="${1}" || die "Two arguments needed." + out_file="${2}" || die "Two arguments needed." + pattern='Maximum Receive Rate trial results in .*' || die + pattern+=' per second: .*\]</status>' || die + # RC of the following line is returned. + grep -o "${pattern}" "${in_file}" | grep -o '\[.*\]' > "${out_file}" +} + + +function parse_results_ndrpdr () { + + # Parse NDRPDR test message(s) for PDR_LOWER, into JSON-readable output. + # + # Return non-zero if parsing fails. + # Parse for PDR, unless environment variable says NDR. + # + # Arguments: + # - ${1} - Path to (existing) input file. Required. + # - ${2} - Path to (overwritten if exists) output file. Required. + # Variables read: + # - FDIO_CSIT_PERF_PARSE_NDR - If defined and "yes", parse for NDR, not PDR. + # Files read: + # - output.xml - The input file from argument location. + # Files updated: + # - results.txt - (Re)created, in argument location. + # Functions called: + # - die - Print to stderr and exit, defined in common.sh + + set -exuo pipefail + + in_file="${1}" || die "Two arguments needed." + out_file="${2}" || die "Two arguments needed." + if [[ "${FDIO_CSIT_PERF_PARSE_NDR:-no}" == "yes" ]]; then + pattern1="Arguments: [ '\\nNDR_LOWER: " || die + else + pattern1="Arguments: [ '\\nPDR_LOWER: " || die + fi + # Adapted from https://superuser.com/a/377084 + pattern2='(?<=R: ).*(?= pps)' || die + if fgrep "${pattern1}" "${in_file}" | grep -Po "${pattern2}" >> "${out_file}" + then + # Add bracket https://www.shellhacks.com/sed-awk-add-end-beginning-line/ + sed -i 's/.*/[&]/' "${out_file}" + # Returns nonzero if fails. + return "$?" + fi + # Maybe it was CPS instead of pps? + pattern2='(?<=R: ).*(?= CPS)' || die + if fgrep "${pattern1}" "${in_file}" | grep -Po "${pattern2}" >> "${out_file}" + then + # Add bracket https://www.shellhacks.com/sed-awk-add-end-beginning-line/ + sed -i 's/.*/[&]/' "${out_file}" + # Returns nonzero if fails. + return "$?" + else + return 1 + fi +} + + +function parse_results_passrate () { + + # Create fake values for failed tests. + # + # This function always passes (or dies). + # + # A non-zero but small value is chosen for failed run, to distinguish from + # real nonzero perf (which are big in general) and real zero values. + # A medium sized value is chosen for a passed run. + # This way bisect can search for breakages and fixes in device tests. + # At least in theory, as device tests are bootstrapped too differently. + # + # The fake value is repeated according to BMRR multiplicity, + # because a single value can be lost in high stdev data. + # (And it does not hurt for single value outputs such as NDR.) + # + # TODO: Count number of tests and generate fake results for every one. + # Currently that would interfere with test retry logic. + # + # Arguments: + # - ${1} - Path to (existing) input file. Required. + # - ${2} - Path to (overwritten if exists) output file. Required. + # Variables read: + # - CSIT_PERF_TRIAL_MULTIPLICITY - To create fake results of this length. + # Files read: + # - output.xml - The input file from argument location. + # Files updated: + # - results.txt - (Re)created, in argument location. + # Functions called: + # - die - Print to stderr and exit, defined in common.sh + + set -exuo pipefail + + in_file="${1}" || die "Two arguments needed." + out_file="${2}" || die "Two arguments needed." + # The last status is the top level (global) robot status. + # It only passes if there were no (critical) test failures. + if fgrep '<status status=' "${out_file}" | tail -n 1 | fgrep '"PASS"'; then + fake_value="30.0" || die + else + fake_value="2.0" || die + fi + out_arr=("[") || die + for i in `seq "${CSIT_PERF_TRIAL_MULTIPLICITY:-1}"`; do + out_arr+=("${fake_value}" ",") || die + done + # The Python part uses JSON parser, the last comma has to be removed. + # Requires Bash 4.3 https://stackoverflow.com/a/36978740 + out_arr[-1]="]" || die + # TODO: Is it possible to avoid space separation by manipulating IFS? + echo "${out_arr[@]}" > "${out_file}" || die +} + + +function parse_results_soak () { + + # Parse soak test message(s) for lower bound, into JSON-readable output. + # + # Return non-zero if parsing fails. + # + # Arguments: + # - ${1} - Path to (existing) input file. Required. + # - ${2} - Path to (overwritten if exists) output file. Required. + # Files read: + # - output.xml - The input file from argument location. + # Files updated: + # - results.txt - (Re)created, in argument location. + # Functions called: + # - die - Print to stderr and exit, defined in common.sh + + set -exuo pipefail + + in_file="${1}" || die "Two arguments needed." + out_file="${2}" || die "Two arguments needed." + pattern1='PLRsearch lower bound: .*, .*<' || die + # Adapted from https://superuser.com/a/377084 + pattern2='(?<=: ).*(?= pps)' || die + if grep "${pattern1}" "${in_file}" | grep -Po "${pattern2}" >> "${out_file}" + then + # Add bracket https://www.shellhacks.com/sed-awk-add-end-beginning-line/ + sed -i 's/.*/[&]/' "${out_file}" + # Returns nonzero if fails. + else + return 1 + fi } |