diff options
Diffstat (limited to 'tests/func/ipfix/ipfix_ipv6.robot')
| -rw-r--r-- | tests/func/ipfix/ipfix_ipv6.robot | 278 |
1 files changed, 0 insertions, 278 deletions
diff --git a/tests/func/ipfix/ipfix_ipv6.robot b/tests/func/ipfix/ipfix_ipv6.robot deleted file mode 100644 index 7f86a16712..0000000000 --- a/tests/func/ipfix/ipfix_ipv6.robot +++ /dev/null @@ -1,278 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/ipv4.robot -| Resource | resources/libraries/robot/ipfix.robot -| Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.IPFIXSetup -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.Trace - -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING -# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204) -| Suite Setup | Run Keywords | Setup all TGs before traffic script -| ... | AND | Update All Interface Data On All Nodes | ${nodes} -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes} -| ... | AND | Vpp Show Errors | ${nodes['DUT1']} -| ... | AND | Show vpp trace dump on all DUTs -| Documentation | *IPFIX ipv6 test cases* -| ... -| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with -| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6 -| ... | routing and static routes. IPFIX is configured on DUT1 with -| ... | DUT1->TG interface as collector.Test packets are -| ... | sent from TG to or through DUT1. TG listens for flow report packets -| ... | and verifies that they contains flow records of test packets sent. - -*** Variables *** -| ${dut1_to_tg_ip}= | 10::10 -| ${dut2_to_dut1_ip}= | 11::10 -| ${tg_to_dut1_ip}= | 12::10 -| ${prefix_length}= | 64 -| ${ip_version}= | ip6 -| ${port}= | 80 -| ${sessions}= | 45 - -# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported. -| ${dut1_to_tg_ip4}= | 192.168.1.1 -| ${tg_to_dut1_ip4}= | 16.0.0.1 - -*** Test Cases *** -| TC01: DUT reports packet flow for traffic by source address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} - -| TC02: DUT reports packet flow for traffic with local destination address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with destination -| | ... | address of DUT1. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst -| | ... | ${dut1_to_tg_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} - -| TC03: DUT reports packet flow for traffic with remote destination address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with destination -| | ... | address of DUT2. -| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen -| | ... | for IPFIX template and data packets, verify that IPFIX reported -| | ... | the received packet. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip} -| | ... | ${dut2_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst -| | ... | ${dut2_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${dut2_to_dut1_ip} - -| TC04: DUT reports packet flow for traffic by source and destination port -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address -| | ... | and source and destination ports. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | And VPP configures classify session generic | ${dut1_node} -| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | ... | proto 6 l4 src_port ${port} dst_port ${port} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | port=${port} - -| TC05: DUT reports packet flow with a large number of packets -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packets. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | count=20000 | timeout=10 - -| TC06: DUT reports packet flow when multiple sessions are configured -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add several classify sessions with different -| | ... | ports. -| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching -| | ... | configured sessions, then listen for IPFIX template and data packets, -| | ... | verify that IPFIX reported the received packets for each session. -| | ... | [Ref] RFC 7011 -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Set Interface Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | :FOR | ${index} | IN RANGE | ${sessions} -| | | VPP configures classify session generic | ${dut1_node} -| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | | ... | proto 6 l4 src_port ${index} dst_port ${index} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | ... | mtu=1450 | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | ${sessions} | timeout=10 | count=3 - -# TODO: DUT reports packet flow when ACL is configured with wildcards |