diff options
Diffstat (limited to 'tests/vpp/device/ip4_tunnels')
3 files changed, 250 insertions, 0 deletions
diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot new file mode 100644 index 0000000000..db5b3227d4 --- /dev/null +++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot @@ -0,0 +1,82 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# Import configuration and test data: +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | LISP_IP4o4 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip4-lisp-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ +| ... | circular topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4\ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing\ +| ... | over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4\ +| ... | routing and static routes. LISPoIPv4 tunnel is\ +| ... | configured between DUT1 and TG2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ +| ... | are sent by TG on if1 link to DUT1; on receive TG verifies\ +| ... | packets for correctness and their IPv4 src-addr, dst-addr\ +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISP.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv4 LISP testing +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} +| | ... | ${dut1_to_tg_ip4_static_adjacency} +| | Then Send packet and verify LISP encap +| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc4} | ${dst_rloc4} + +*** Test Cases *** +| tc01-46B-ethip4lisp-ip4base-dev +| | [Tags] | 46B +| | frame_size=${46} | phy_cores=${0} diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot new file mode 100644 index 0000000000..f4b2cb50c1 --- /dev/null +++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot @@ -0,0 +1,83 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# Import configuration and test data: +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | LISPGPE_IP4o4 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip4-lispgpe-ip4 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\ +| ... | circular topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv4-ICMPv4\ +| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4\ +| ... | routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ +| ... | with IPv4 routing and static routes. LISPoIPv4 tunnel is\ +| ... | configured between DUT1 and TG. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ +| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies packets\ +| ... | for correctness and their IPv4 src-addr, dst-addr and\ +| ... | MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} +| ${is_gpe}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISP. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv4 LISP testing +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} +| | ... | ${dut1_to_tg_ip4_static_adjacency} | ${is_gpe} +| | Then Send packet and verify LISP GPE encap +| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc4} | ${dst_rloc4} + +*** Test Cases *** +| tc01-46B-ethip4lispgpe-ip4base-dev +| | [Tags] | 46B +| | frame_size=${46} | phy_cores=${0} diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot new file mode 100644 index 0000000000..402bfbfee2 --- /dev/null +++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot @@ -0,0 +1,85 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +# import additional Lisp settings from resource file +| Variables | resources/test_data/lisp/lisp.py +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | LISPGPE_IP6o4 +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *ip4-lispgpe-ip6 encapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG(if1)-DUT1-TG(if2) 2-node\ +| ... | circular topology with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv6-ICMPv6\ +| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6\ +| ... | routing over LISPoIPv4 tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\ +| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is\ +| ... | configured between DUT1 and TG(if2). +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\ +| ... | are sent in if1 by TG on links to DUT1; on receive\ +| ... | TG verifies packets for correctness and their IPv6 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${54} +| ${ot_mode}= | 6to4 +| ${is_gpe}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure LISPGPE\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Configure topology for IPv6 LISPoIP4 testing +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | And Configure LISP in 2-node circular topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${is_gpe} +| | Then Send packet and verify LISPoTunnel encap +| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6} +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${src_rloc4} | ${dst_rloc4} | ${ot_mode} + +*** Test Cases *** +| tc01-62B-ethip4lispgpe-ip6base-dev +| | [Tags] | 62B +| | frame_size=${62} | phy_cores=${0} |