diff options
Diffstat (limited to 'tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot')
-rw-r--r-- | tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot new file mode 100644 index 0000000000..9fe04a3438 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -0,0 +1,168 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* +| +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUT1, +| ... | Eth-IPv4-IPSec on DUT1-TG +| ... | *[Cfg] DUT configuration:* DUT1 is configured with multiple IPsec\ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it\ +| ... | and sends back to TG. +| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ +| ... | with zero packet loss tolerance, then measures loss at this load\ +| ... | while additional tunnels are configured.\ +| ... | Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups +| ... | (flow-group per direction, number of flows per flow-group equals to +| ... | number of IPSec tunnels) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and +| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| ... | is applied to the stream. +| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${n_added_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Set Variable | ${NONE} +| | ${ipsec_proto} = | IPsec Proto ESP +| | +| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch +| | Start Traffic on Background | ${unidirectional_throughput} +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} +| | ${result}= | Stop Running Traffic +| | Display Reconfig Test Message | ${result} + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} |