diff options
Diffstat (limited to 'tests/vpp')
29 files changed, 40 insertions, 3416 deletions
diff --git a/tests/vpp/perf/__init__.robot b/tests/vpp/perf/__init__.robot index 04b47f9746..ef7c81980b 100644 --- a/tests/vpp/perf/__init__.robot +++ b/tests/vpp/perf/__init__.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -29,6 +29,7 @@ | ... | AND | Get CPU Info from All Nodes | ${nodes} | ... | AND | Update All Interface Data on All Nodes | ${nodes} | ... | skip_tg=${True} +| ... | AND | Stop Vpp Service on All Duts | ${nodes} | ... | AND | Finalize Suite Setup Export | | Suite Teardown | Run Keywords | Start Suite Teardown Export diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot deleted file mode 100644 index 628a264655..0000000000 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot +++ /dev/null @@ -1,147 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | LXC -| ... | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | eth-l2bdbasemaclrn-eth-2memif-1lxc -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | container -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2BD test cases** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with two \ -| ... | L2 bridge domains and MAC learning enabled. LXC is connected to VPP \ -| ... | via Memif interface. LXC is running same VPP version as running on \ -| ... | DUT. LXC is limited via cgroup to use 3 cores allocated from pool of \ -| ... | isolated CPUs. There are no memory constraints. DUT1 and DUT2 are \ -| ... | tested with with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${0} -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 -# Container -| ${container_engine}= | LXC -| ${container_chain_topology}= | chain - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Start containers for test -| | And Initialize L2 Bridge Domain for multiple chains with memif pairs -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-ndrpdr.robot index a091ee6936..fd86c564a4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-ndrpdr.robot @@ -66,6 +66,7 @@ | ${rxq_ratio}= | ${3} # Traffic profile | ${traffic_profile}= | trex-stl-ethip4-ip4dst${rts_per_flow}-${nic_pfs}p +| ${traffic_directions}= | ${6} *** Keywords *** | Local Template diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-rnd-ndrpdr.robot index bc01eefb2c..abb3aa72da 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale600k-rnd-ndrpdr.robot @@ -66,6 +66,7 @@ | ${rxq_ratio}= | ${3} # Traffic profile | ${traffic_profile}= | trex-stl-ethip4-ip4dst-rnd${rts_per_flow}-${nic_pfs}p +| ${traffic_directions}= | ${6} *** Keywords *** | Local Template diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-ndrpdr.robot index b1e83b1d9b..76110ed346 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-ndrpdr.robot @@ -66,6 +66,7 @@ | ${rxq_ratio}= | ${3} # Traffic profile | ${traffic_profile}= | trex-stl-ethip4-ip4dst${rts_per_flow}-${nic_pfs}p +| ${traffic_directions}= | ${6} *** Keywords *** | Local Template diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-rnd-ndrpdr.robot index e72ba8e1a8..a5606e70fb 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale60k-rnd-ndrpdr.robot @@ -66,6 +66,7 @@ | ${rxq_ratio}= | ${3} # Traffic profile | ${traffic_profile}= | trex-stl-ethip4-ip4dst-rnd${rts_per_flow}-${nic_pfs}p +| ${traffic_directions}= | ${6} *** Keywords *** | Local Template diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-ndrpdr.robot index 8a17f390c7..c1413ed215 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-ndrpdr.robot @@ -66,6 +66,7 @@ | ${rxq_ratio}= | ${3} # Traffic profile | ${traffic_profile}= | trex-stl-ethip4-ip4dst${rts_per_flow}-${nic_pfs}p +| ${traffic_directions}= | ${6} *** Keywords *** | Local Template diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-rnd-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-rnd-ndrpdr.robot index 8cd519d499..7b6dc8e95e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-rnd-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale6m-rnd-ndrpdr.robot @@ -66,6 +66,7 @@ | ${rxq_ratio}= | ${3} # Traffic profile | ${traffic_profile}= | trex-stl-ethip4-ip4dst-rnd${rts_per_flow}-${nic_pfs}p +| ${traffic_directions}= | ${6} *** Keywords *** | Local Template diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-1lbvpplacp-ndrpdr.robot index 856ae1c8ae..3b98788514 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-1lbvpplacp-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,30 +15,29 @@ | Resource | resources/libraries/robot/shared/default.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | LXC -| ... | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | eth-l2xcbase-eth-2memif-1lxc +| ... | NIC_Intel-X710 | ETH | L2XCBASE | BASE +| ... | LBOND | LBOND_1L | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | DRV_VFIO_PCI +| ... | eth-l2xcbase-1lbvpplacp | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | container +| Test Teardown | Tear down test | performance | | Test Template | Local Template | -| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| Documentation | **RFC2544: Pkt throughput L2XC test cases with link bonding** | ... | | ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ | ... | topology with single links between nodes. | ... | | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. | ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ -| ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}. -| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP \ -| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores \ -| ... | allocated from pool of isolated CPUs. There are no memory contraints. +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ +| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ +| ... | DUT2 and L2XC connection to TG-facing interfaces. DUT1/DUT2 is \ +| ... | tested with ${nic_name}. | ... | | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ @@ -51,9 +50,11 @@ | ... | flow-group) with all packets containing Ethernet header, IPv4 header \ | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -61,19 +62,19 @@ | ${nic_txq_size}= | 0 | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 +| ${dut_dut_links}= | 1 | ${osi_layer}= | L2 | ${overhead}= | ${0} +# Link bonding config +| ${bond_mode}= | lacp +| ${lb_mode}= | l34 # Traffic profile: | ${traffic_profile}= | trex-stl-ethip4-ip4src254 -# Container -| ${container_engine}= | LXC -| ${container_chain_topology}= | chain *** Keywords *** | Local Template | | [Documentation] -| | ... | - **[Cfg]** DUT runs L2XC switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Cfg]** DUT runs L2XC and bonding with ${phy_cores} phy core(s). | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* @@ -92,55 +93,54 @@ | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Start containers for test -| | And Initialize L2 xconnect with memif pairs +| | AND Initialize L2 xconnect with link bonding in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 64B-1c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 64B-2c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 64B-4c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 1518B-1c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 1518B-2c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 1518B-4c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 9000B-1c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 9000B-2c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| 9000B-4c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| IMIX-1c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| IMIX-2c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr +| IMIX-4c-eth-l2xcbase-1lbvpplacp-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot deleted file mode 100644 index 173325ca19..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 10R1C | 1_ADDED_CHAIN | 10VM1T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${2} -| ${nf_dtc}= | ${0.5} -| ${nf_chains}= | ${10} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot deleted file mode 100644 index 781784233c..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 10R1C | 1_ADDED_CHAIN | 10VM2T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${10} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot deleted file mode 100644 index 850e1d8b22..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 1R1C | 1_ADDED_CHAIN | 1VM1T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${2} -| ${nf_dtc}= | ${0.5} -| ${nf_chains}= | ${1} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot deleted file mode 100644 index 170e09dff8..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 1R1C | 1_ADDED_CHAIN | 1VM2T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot deleted file mode 100644 index cb668f5fbf..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 2R1C | 1_ADDED_CHAIN | 2VM1T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${2} -| ${nf_dtc}= | ${0.5} -| ${nf_chains}= | ${2} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot deleted file mode 100644 index 4dabec5aaa..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 2R1C | 1_ADDED_CHAIN | 2VM2T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${2} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot deleted file mode 100644 index c0c9ccbd10..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 4R1C | 1_ADDED_CHAIN | 4VM1T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${2} -| ${nf_dtc}= | ${0.5} -| ${nf_chains}= | ${4} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot deleted file mode 100644 index ce8612ca12..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 4R1C | 1_ADDED_CHAIN | 4VM2T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet throughput L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${4} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot deleted file mode 100644 index 6b81b4fea9..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 6R1C | 1_ADDED_CHAIN | 6VM1T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${2} -| ${nf_dtc}= | ${0.5} -| ${nf_chains}= | ${6} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot deleted file mode 100644 index 62542a295b..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 6R1C | 1_ADDED_CHAIN | 6VM2T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${6} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot deleted file mode 100644 index 90e5f1458d..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 8R1C | 1_ADDED_CHAIN | 8VM1T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${2} -| ${nf_dtc}= | ${0.5} -| ${nf_chains}= | ${8} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot deleted file mode 100644 index ddb9c88b1a..0000000000 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot +++ /dev/null @@ -1,172 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VXLAN | DOT1Q | NF_DENSITY | NF_TESTPMD -| ... | CHAIN | 8R1C | 1_ADDED_CHAIN | 8VM2T | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet loss L2BD test cases with Dot1Q and -| ... | VXLANoIPv4 with ${nf_chains} instances, ${nf_nodes} VMs per instance.** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 for \ -| ... | l2 cross-connect switching of IPv4 Dot1q-IPv4-UDP-VXLAN-Eth-IPv4 is \ -| ... | applied on link between DUT1 and TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running testpmd l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and throughput NDR (Non Drop \ -| ... | Rate) with zero packet loss tolerance, then measured loss at this load \ -| ... | while additional chain is configured. \ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 256 flows per \ -| ... | flow-group) with all packets containing Ethernet header with .1Q, IPv4 \ -| ... | header, UPD header, VXLAN header and static payload. MAC addresses are \ -| ... | matching MAC addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${8} -| ${nf_added_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-dot1qip4vxlan-ip4src${nf_chains}udpsrcrnd - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs Dot1Q-IP4-Vxlan L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | ${nf_total_chains}= | Evaluate | ${nf_chains} + ${nf_added_chains} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | ... | count=${nf_total_chains} -| | And Initialize layer dot1q -| | ... | count=${nf_chains} | vlan_per_chain=${False} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And Initialize layer dot1q -| | ... | count=${nf_total_chains} | vlan_per_chain=${False} -| | ... | start=${nf_chains+1} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_total_chains} | start=${nf_chains+1} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_total_chains} | nf_nodes=${nf_nodes} -| | ... | start=${nf_chains+1} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 118B-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 118B | 1C -| | frame_size=${118} | phy_cores=${1} - -| 118B-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 118B | 2C -| | frame_size=${118} | phy_cores=${2} - -| 118B-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 118B | 4C -| | frame_size=${118} | phy_cores=${4} - -| 1518B-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot deleted file mode 100644 index bfeea9955c..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_1L | VM_TESTPMD | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology -| | ... | ${bd_id1} | ${bd_id2} | ${subid} -| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=testpmd_io -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot deleted file mode 100644 index 0a09e4b1a3..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ /dev/null @@ -1,167 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_1L | NF_VPPL2XC | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2BD test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology -| | ... | ${bd_id1} | ${bd_id2} | ${subid} -| | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} -| | ... | vnf=vppl2xc_2vhostvr1024 -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot deleted file mode 100644 index ed320ca6f6..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_1L | NF_TESTPMD | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 cross- connect. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running testpmd \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2XC switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology -| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=testpmd_io -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot deleted file mode 100644 index aac2c62e02..0000000000 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM -| ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 -| ... | LBOND_1L | NF_VPPL2XC | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | 1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Pkt throughput L2XC test cases with vhost and vpp \ -| ... | link bonding** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ -| ... | topology with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. \ -| ... | 802.1q tagging is applied on link between DUT1 and DUT2. -| ... | -| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with VPP \ -| ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and \ -| ... | DUT2 and L2 cross- connect. Qemu VNFs are \ -| ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ -| ... | addresses of the TG node interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so -| ... | vhost_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L2 -| ${overhead}= | ${4} -| ${subid}= | 10 -| ${tag_rewrite}= | pop-1 -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Link bonding config -| ${bond_mode}= | lacp -| ${lb_mode}= | l34 -# Traffic profile: -| ${traffic_profile}= | trex-stl-ethip4-ip4src254 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2XC switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | Set Test Variable | ${vlan_strip_off} | ${TRUE} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology -| | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} -| | ... | vnf=vppl2xc_2vhostvr1024 -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot deleted file mode 100644 index 1fde752893..0000000000 --- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot +++ /dev/null @@ -1,165 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet throughput L2BD test cases with \ -| ... | VXLANoIPv4 and vhost** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ -| ... | payload. MAC addresses are matching MAC addresses of the TG node \ -| ... | interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so -| ... | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${50} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-ethip4vxlan-ip4src${nf_chains}udpsrcrnd -| ${acl_type}= | permit - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - L2 Frame Size [B]. Type: integer -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - acl_type - FIXME. -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | @{permit_list} = | Create List | 172.17.0.2/32 | 172.27.0.2/32 -| | Run Keyword If | '${acl_type}' != '${EMPTY}' -| | ... | Configure ACLs on a single interface | ${dut1} | ${DUT1_${int}2_1}[0] -| | ... | input | ${acl_type} | @{permit_list} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} -| | ... | vnf=vppl2xc_2vhostvr1024 -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 1C -| | frame_size=${114} | phy_cores=${1} - -| 114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 2C -| | frame_size=${114} | phy_cores=${2} - -| 114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 4C -| | frame_size=${114} | phy_cores=${4} - -| 1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot deleted file mode 100644 index ed3af348ed..0000000000 --- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet throughput L2BD test cases with \ -| ... | VXLANoIPv4 and vhost** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ -| ... | payload. MAC addresses are matching MAC addresses of the TG node \ -| ... | interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so -| ... | vhost_plugin.so | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${50} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-ethip4vxlan-ip4src${nf_chains}udpsrcrnd -| ${acl_type}= | permit+reflect - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - L2 Frame Size [B]. Type: integer -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | @{permit_list} = | Create List | 172.17.0.2/32 | 172.27.0.2/32 -| | Run Keyword If | '${acl_type}' != '${EMPTY}' -| | ... | Configure ACLs on a single interface | ${dut1} | ${DUT1_${int}2_1}[0] -| | ... | input | ${acl_type} | @{permit_list} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} -| | ... | vnf=vppl2xc_2vhostvr1024 -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 1C -| | frame_size=${114} | phy_cores=${1} - -| 114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 2C -| | frame_size=${114} | phy_cores=${2} - -| 114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 4C -| | frame_size=${114} | phy_cores=${4} - -| 1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot deleted file mode 100644 index 827e79b80c..0000000000 --- a/tests/vpp/perf/vts/2n1l-10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot +++ /dev/null @@ -1,165 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY -| ... | VHOST | VM | VHOST_1024 | VTS | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | vhost -| -| Test Template | Local Template -| -| Documentation | **RFC2544: Packet throughput L2BD test cases with \ -| ... | VXLANoIPv4 and vhost** -| ... | -| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ -| ... | with single links between nodes. -| ... | -| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link from/to TG. -| ... | -| ... | - **[Cfg] DUT configuration:** DUTs are configured with L2 bridge- \ -| ... | domain and MAC learning enabled. Qemu VNFs are connected \ -| ... | to VPP via vhost-user interfaces. Guest is running VPP l2xc \ -| ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUTs are \ -| ... | tested with ${nic_name}. -| ... | -| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ -| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ -| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ -| ... | expressed in percentage of packets transmitted. NDR and PDR are \ -| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ -| ... | library. -| ... | Test packets are generated by TG on \ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \ -| ... | payload. MAC addresses are matching MAC addresses of the TG node \ -| ... | interfaces. -| ... | -| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | vhost_plugin.so -| ... | vxlan_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${50} -| ${nf_dtcr}= | ${1} -| ${nf_dtc}= | ${1} -| ${nf_chains}= | ${1} -| ${nf_nodes}= | ${1} -# Traffic profile: -| ${traffic_profile}= -| ... | trex-stl-ethip4vxlan-ip4src${nf_chains}udpsrcrnd -| ${acl_type}= | ${EMPTY} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | - **[Cfg]** DUT runs L2BD switching config. \ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. -| | -| | ... | *Arguments:* -| | ... | - frame_size - L2 Frame Size [B]. Type: integer -| | ... | - phy_cores - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - acl_type - FIXME. -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | @{permit_list} = | Create List | 172.17.0.2/32 | 172.27.0.2/32 -| | Run Keyword If | '${acl_type}' != '${EMPTY}' -| | ... | Configure ACLs on a single interface | ${dut1} | ${DUT1_${int}2_1}[0] -| | ... | input | ${acl_type} | @{permit_list} -| | And Initialize layer ip4vxlan -| | ... | count=${nf_chains} -| | And Initialize L2 bridge domains for multiple chains with Vhost-User -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} -| | And Configure chains of NFs connected via vhost-user -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | use_tuned_cfs=${False} | auto_scale=${True} -| | ... | vnf=vppl2xc_2vhostvr1024 -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 114B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 1C -| | frame_size=${114} | phy_cores=${1} - -| 114B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 2C -| | frame_size=${114} | phy_cores=${2} - -| 114B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 114B | 4C -| | frame_size=${114} | phy_cores=${4} - -| 1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vts/regenerate_testcases.py b/tests/vpp/perf/vts/regenerate_testcases.py deleted file mode 100755 index 4d34792d2e..0000000000 --- a/tests/vpp/perf/vts/regenerate_testcases.py +++ /dev/null @@ -1,18 +0,0 @@ -#!/usr/bin/env python3 - -# Copyright (c) 2023 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -from resources.libraries.python.autogen.Regenerator import Regenerator - -Regenerator().regenerate_glob(u"*.robot", protocol=u"ethip4vxlan") |