diff options
Diffstat (limited to 'tests')
7 files changed, 0 insertions, 888 deletions
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot deleted file mode 100644 index 4f2bcfeb97..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot +++ /dev/null @@ -1,87 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPv4 ARP test cases* -| ... -| ... | RFC826 ARP: Eth-IPv4 and Eth-ARP on links TG-DUT1, TG-DUT2, DUT1-DUT2: -| ... | IPv4 ARP tests use 3-node topology TG - DUT1 - DUT2 - TG with one link -| ... | between the nodes. DUT1 and DUT2 are configured with IPv4 routing and -| ... | static routes. DUT ARP functionality is tested by making TG send ICMPv4 -| ... | Echo Requests towards its other interface via DUT1 and DUT2. - -*** Variables *** -| ${dut1_to_tg_ip}= | 192.168.1.1 -| ${dut1_to_dut2_ip}= | 192.168.2.1 -| ${dut1_to_dut2_ip_GW}= | 192.168.2.2 -| ${test_dst_ip}= | 32.0.0.1 -| ${test_src_ip}= | 16.0.0.1 -| ${prefix_length}= | 24 - -*** Test Cases *** -| TC01: DUT sends ARP Request for unresolved locally connected IPv4 address -| | [Documentation] -| | ... | Make TG send test packet destined to IPv4 address of its other\ -| | ... | interface connected to DUT2. Make TG verify DUT2 sends ARP -| | ... | Request for locally connected TG IPv4 address. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | Then Send packet and verify ARP request | ${tg_node} -| | ... | ${test_src_ip} | ${dut1_to_dut2_ip_GW} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} -| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW} - -| TC02: DUT sends ARP Request for route next hop IPv4 address -| | [Documentation] | -| | ... | Make TG send test packet destined to IPv4 address matching\ -| | ... | static route on DUT2. Make TG verify DUT2 sends ARP Request for -| | ... | next hop of the static route. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | Then Send packet and verify ARP request | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} -| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot deleted file mode 100644 index 4738699803..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot +++ /dev/null @@ -1,79 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Ipv4 Multipath routing test cases* -| ... -| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\ -| ... | and multipath routing. -| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\ -| ... | link to DUT. Packet is received on TG on the second link from DUT1. - - -*** Variables *** -| ${ip_1}= | 192.168.1.1 -| ${ip_2}= | 192.168.2.1 -| ${test_dst_ip}= | 32.0.0.1 -| ${test_src_ip}= | 16.0.0.1 -| ${prefix_length}= | 24 -| ${neighbor_1_ip}= | 192.168.2.10 -| ${neighbor_1_mac}= | 02:00:00:00:00:02 -| ${neighbor_2_ip}= | 192.168.2.20 -| ${neighbor_2_mac}= | 02:00:00:00:00:03 - -*** Test Cases *** -| TC01: IPv4 Equal-cost multipath routing -| | [Documentation] -| | ... | [Top] TG=DUT -| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths. -| | ... | [Ver] TG sends 100 IPv4 ICMP packets traffic on the first link to\ -| | ... | DUT. On second link to TG verify if traffic is divided into two paths. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac} -| | When Vpp Route Add | ${dut_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${neighbor_1_ip} | interface=${dut_to_tg_if1} -| | ... | multipath=${TRUE} -| | And Vpp Route Add | ${dut_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${neighbor_2_ip} | interface=${dut_to_tg_if1} -| | ... | multipath=${TRUE} -| | Then Send packets and verify multipath routing | ${tg_node} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip} | ${test_dst_ip} -| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${dut_to_tg_if1_mac} -| | ... | ${neighbor_1_mac} | ${neighbor_2_mac} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot deleted file mode 100644 index c98a05b344..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot +++ /dev/null @@ -1,144 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Source RPF check on IPv4 test cases* -| ... -| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG -| ... | with one link between the nodes. -| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect. -| ... | DUT1 is configured with IP source check on link to TG, -| ... | *[Ver] TG verification:* Test ICMP Echo Request packets are sent -| ... | in one direction by TG on link to DUT1 and received on TG link -| ... | to DUT2. On receive TG verifies if packets which source address -| ... | is not in routes are dropped. - -*** Variables *** -| ${dut1_to_tg_ip}= | 192.168.1.1 -| ${dut1_to_tg_ip_GW}= | 192.168.1.2 -| ${dut1_to_dut2_ip}= | 192.168.2.1 -| ${dut1_to_dut2_ip_GW}= | 192.168.2.2 -| ${test_dst_ip}= | 32.0.0.1 -| ${pass_test_src_ip}= | 16.0.0.1 -| ${drop_test_src_ip}= | 24.0.0.1 -| ${prefix_length}= | 24 - -*** Test Cases *** -| TC01: VPP source RPF check on IPv4 src-addr -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG -| | ... | [Cfg] On DUT1 setup IP source check. -| | ... | [Ver] Make TG verify matching packets which source address -| | ... | is not in routes are dropped. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | ... | resolve_attempts=${NONE} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW} -| | ... | ${tg_to_dut1_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_tg_ip_GW} | interface=${dut1_to_tg} -| | ... | resolve_attempts=${NONE} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${dut1_to_tg_ip_GW} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Packet transmission from port to port should fail | ${tg_node} -| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} - -| TC02: VPP pass traffic on non-enabled RPF interface -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG -| | ... | [Cfg] On DUT1 setup IP source check. -| | ... | [Ver] Make TG verify matching packets on non-enabled RPF interface -| | ... | are passed. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | ... | resolve_attempts=${NONE} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW} -| | ... | ${tg_to_dut1_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_tg_ip_GW} | interface=${dut1_to_tg} -| | ... | resolve_attempts=${NONE} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${test_dst_ip} | ${pass_test_src_ip} | ${tg_to_dut2} -| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${test_dst_ip} | ${dut1_to_tg_ip_GW} | ${tg_to_dut2} -| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot deleted file mode 100644 index 8e868aa374..0000000000 --- a/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot +++ /dev/null @@ -1,191 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/overlay/vxlan.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv4* -| ... -| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology -| ... | with double parallel links. -| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on -| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with MAC learning enabled -| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured -| ... | between L2BDs on DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent -| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG -| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. - -*** Variables *** -| ${vni_1}= | 23 -| ${vni_2}= | 35 - -| ${bd_id1}= | 10 -| ${bd_id2}= | 20 -| ${bd_id3}= | 30 -| ${shg1}= | 1 -| ${shg2}= | 2 - -| ${ip4_addr1}= | 172.16.0.1 -| ${ip4_addr2}= | 172.16.0.2 -| ${ip4_prefix}= | 24 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure -| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged -| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make -| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be -| | ... | switched by DUT1 and DUT2; verify packets are not switched between -| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. -| | ... | [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']} -| | ... | ${nodes['DUT1']} | ${nodes['DUT2']} -| | And Set interfaces in 3-node BD-SHG test up -| | And VPP Interface Set IP Address | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${ip4_addr1} | ${ip4_prefix} -| | And VPP Interface Set IP Address | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${ip4_addr2} | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg1} -| | And Create bridge domain | ${dut2_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Create bridge domain | ${dut2_node} | ${bd_id3} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if1} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if2} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if1} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMPv4 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut2_if1} | ${tg_to_dut2_if2} - -| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 -| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one -| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces -| | ... | to be switched by DUT1 and DUT2; verify packets are switched between -| | ... | all TG interfaces. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']} -| | ... | ${nodes['DUT1']} | ${nodes['DUT2']} -| | And Set interfaces in 3-node BD-SHG test up -| | And VPP Interface Set IP Address | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${ip4_addr1} | ${ip4_prefix} -| | And VPP Interface Set IP Address | ${dut2_node} | ${dut2_to_dut1} -| | ... | ${ip4_addr2} | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg2} -| | And Create bridge domain | ${dut2_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Create bridge domain | ${dut2_node} | ${bd_id3} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if1} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${tg_to_dut2_if2} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if1} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${tg_to_dut2_if2} -| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut2_if1} | ${tg_to_dut2_if2} diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot deleted file mode 100644 index b970d37aef..0000000000 --- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot +++ /dev/null @@ -1,81 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Ipv6 Multipath routing test cases* -| ... -| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\ -| ... | and multipath routing. -| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\ -| ... | link to DUT. Packet is received on TG on the second link from DUT1. - -*** Variables *** -| ${ip_1}= | 3ffe:61::1 -| ${ip_2}= | 3ffe:62::1 -| ${test_dst_ip}= | 3ffe:71::1 -| ${test_src_ip}= | 3ffe:51::1 -| ${prefix_length}= | 64 -| ${neighbor_1_ip}= | 3ffe:62::2 -| ${neighbor_1_mac}= | 02:00:00:00:00:02 -| ${neighbor_2_ip}= | 3ffe:62::3 -| ${neighbor_2_mac}= | 02:00:00:00:00:03 - -*** Test Cases *** -| TC01: IPv6 Equal-cost multipath routing -| | [Documentation] -| | ... | [Top] TG=DUT -| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths. -| | ... | [Ver] TG sends 100 IPv6 ICMP packets traffic on the first link to\ -| | ... | DUT. On second link to TG verify if traffic is divided into two paths. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length} -| | And VPP Interface Set IP Address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac} -| | And Suppress ICMPv6 router advertisement message | ${nodes} -| | When Vpp Route Add -| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${neighbor_1_ip} | interface=${dut_to_tg_if1} -| | ... | multipath=${TRUE} -| | And Vpp Route Add -| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${neighbor_2_ip} | interface=${dut_to_tg_if1} -| | ... | multipath=${TRUE} -| | Then Send packets and verify multipath routing -| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip} -| | ... | ${test_dst_ip} | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} -| | ... | ${dut_to_tg_if1_mac} | ${neighbor_1_mac} | ${neighbor_2_mac} diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot deleted file mode 100644 index 267faac50f..0000000000 --- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot +++ /dev/null @@ -1,112 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPv6 Router Advertisement test cases* -| ... -| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links -| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 - -| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured -| ... | with IPv6 routing and static routes. TG verifies received RA packets. - - -*** Variables *** -| ${dut1_to_tg_ip}= | 3ffe:62::1 -| ${tg_to_dut1_ip}= | 3ffe:62::2 -| ${prefix_length}= | 64 -| ${interval}= | 2 - -*** Test Cases *** -| TC01: DUT transmits RA on IPv6 enabled interface -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG. -| | ... | [Ver] Make TG wait for IPv6 Router Advertisement packet to be sent\ -| | ... | by DUT1 and verify the received RA packet is correct. -| | [Tags] | EXPECTED_FAILING -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg} -| | Then Receive and verify router advertisement packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} - -| TC02: DUT retransmits RA on IPv6 enabled interface after a set interval -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG. -| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\ -| | ... | to be sent by DUT1 and verify the received RA packets are correct. -| | [Tags] | EXPECTED_FAILING -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg} -| | ... | interval=${interval} -| | :FOR | ${n} | IN RANGE | ${2} -| | | Then Receive and verify router advertisement packet -| | | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${interval} - -| TC03: DUT responds to Router Solicitation request -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\ -| | ... | sending of Router Advertisement packets periodically. -| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\ -| | ... | for response from DUT1 and verify the received RA packet is correct. -| | [Tags] | EXPECTED_FAILING -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg} -| | Then Send router solicitation and verify response -| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg} -| | ... | ${tg_to_dut1_ip} - -| TC04: DUT responds to Router Solicitation request sent from link local address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\ -| | ... | sending of Router Advertisement packets periodically. -| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\ -| | ... | for response from DUT1 and verify the received RA packet is correct. -| | [Tags] | EXPECTED_FAILING -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg} -| | Then Send router solicitation and verify response -| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg} diff --git a/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot deleted file mode 100644 index 715f9ed79a..0000000000 --- a/tests/vpp/func/ip6_tunnels/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot +++ /dev/null @@ -1,194 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/overlay/vxlan.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv6* -| ... -| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology -| ... | with double parallel links. -| ... | *[Enc] Packet encapsulations:* th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on -| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with MAC learning enabled -| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured -| ... | between L2BDs on DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent -| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG -| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. - -*** Variables *** -| ${vni_1}= | 23 -| ${vni_2}= | 35 - -| ${bd_id1}= | 10 -| ${bd_id2}= | 20 -| ${bd_id3}= | 30 -| ${shg1}= | 1 -| ${shg2}= | 2 - -| ${ip6_addr1}= | 3ffe:64::1 -| ${ip6_addr2}= | 3ffe:64::2 -| ${ip6_prefix}= | 64 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure -| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged -| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make -| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be -| | ... | switched by DUT1 and DUT2; verify packets are not switched between -| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. -| | ... | [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Configure path for 3-node BD-SHG test -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} -| | And Set interfaces in 3-node BD-SHG test up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} | ${ip6_prefix} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | ${dut1s_vxlan1}= | When Create VXLAN interface -| | | ... | ${dut1_node} | ${vni_1} | ${ip6_addr1} | ${ip6_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface -| | | ... | ${dut1_node} | ${vni_2} | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface -| | | ... | ${dut2_node} | ${vni_1} | ${ip6_addr2} | ${ip6_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface -| | | ... | ${dut2_node} | ${vni_2} | ${ip6_addr2} | ${ip6_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${bd_id1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${bd_id1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1s_vxlan1} | ${bd_id1} | ${shg1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1s_vxlan2} | ${bd_id1} | ${shg1} -| | And Create bridge domain | ${dut2_node} | ${bd_id2} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${bd_id2} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2s_vxlan1} | ${bd_id2} -| | And Create bridge domain | ${dut2_node} | ${bd_id3} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${bd_id3} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2s_vxlan2} | ${bd_id3} -| | Then Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if1} -| | And Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if2} -| | And Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if1} -| | And Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut2_if1} | ${tg_to_dut2_if2} - -| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 -| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one -| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces -| | ... | to be switched by DUT1 and DUT2; verify packets are switched between -| | ... | all TG interfaces. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Configure path for 3-node BD-SHG test -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} -| | And Set interfaces in 3-node BD-SHG test up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} | ${ip6_prefix} -| | And VPP Interface Set IP Address -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | ${dut1s_vxlan1}= | When Create VXLAN interface -| | ... | ${dut1_node} | ${vni_1} | ${ip6_addr1} | ${ip6_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface -| | ... | ${dut1_node} | ${vni_2} | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface -| | ... | ${dut2_node} | ${vni_1} | ${ip6_addr2} | ${ip6_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface -| | | ... | ${dut2_node} | ${vni_2} | ${ip6_addr2} | ${ip6_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${bd_id1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${bd_id1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1s_vxlan1} | ${bd_id1} | ${shg1} -| | And Add interface to bridge domain -| | ... | ${dut1_node} | ${dut1s_vxlan2} | ${bd_id1} | ${shg2} -| | And Create bridge domain | ${dut2_node} | ${bd_id2} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${bd_id2} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2s_vxlan1} | ${bd_id2} -| | And Create bridge domain | ${dut2_node} | ${bd_id3} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${bd_id3} -| | And Add interface to bridge domain -| | ... | ${dut2_node} | ${dut2s_vxlan2} | ${bd_id3} -| | Then Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if1} -| | And Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if1} | ${tg_to_dut2_if2} -| | And Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if1} -| | And Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut1_if2} | ${tg_to_dut2_if2} -| | And Send ICMPv6 bidirectionally and verify received packets -| | ... | ${tg_node} | ${tg_to_dut2_if1} | ${tg_to_dut2_if2} |