aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python/NATUtil.py
AgeCommit message (Collapse)AuthorFilesLines
2022-06-14fix(pylint): Some quick pylintsPeter Mikus1-3/+2
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: Iba133914882485191ad962e36fae70b6fda0af98
2022-05-03feat(astf): Support framesizes for ASTFVratko Polak1-13/+15
- No support for IMIX. + Fix a bad bug in padding (most ASTF profiles had wrong frame sizes). + Fix a big typo in TCP PPS profiles (s->c was not data, just RST). + Control transaction size via ASTF_N_DATA_FRAMES env variable. - Default value 5 leads to transactions smaller than before. + It ensures transaction is one burst (per direction) even for jumbo. + Edit autogen to set supported frame sizes based on suite id. + Both TCP and UDP use the same values: + 64B for CPS (exact for UDP, nominal for TCP). + 100B, 1518B and 9000B for TPUT and PPS. - TCP TPUT achievable minimum is 70B. + Used 100B to leave room for possible IPv6 ASTF tests. + Separate function for code reused by vpp and trex tests. - I do not really like the new "copy and edit" approach added here. + But it is a quick edit, better autogen refactor is low priority. + Consider both established and transitory sessions as valid. - Mostly for compatibility with 2202 behavior and to avoid ramp-ups. - Assuming both session states have similar enough VPP CPU overhead. + Added a TODO to investigate and maybe reconsider later. + Update the state timeout value to 240s. + That is the default for TCP (for transitory state). - UDP could keep using 300s. + But I prefer UDP and TCP to behave as similarly as possible. + Use TRex tunables to get the exact frame size (for data packets). - It is not clear why the recipe for MSS has to be this complicated. + Move code away from profile init, as frame size is not known there. + Change internal profile API, so values related to MSS are passed. + Lower ramp-up rate for TCP TPUT tests. + Because without lower rate, jumbo fails on packet loss in ramp-up. + UDP TPUT ramp-up rate also lowered (just to keep suites more similar). + Distinguish one-direction and aggregated average frame size. + Update keyword documentation where the distiction matters. + One-direction is needed for turning bandwidth limit to TPS limit. + Aggregated is needed for correct NDRPDR bandwidth result value. - TCP TPUT will always be few percent below bidirectional maximum. + That is unavoidable, as one direction sends more control packets. + Add runtime consistency checks so future refactors are safer. + Fail if padding requested would be negative. + Fail if suite claims unexpected values for packets per transaction. + Edit the 4 types of ASTF profiles to keep them similar to each other. + Move UDP TPUT limit value from a field back to direct argument. + Stop pretending first UDP packet is not data. + Apply small improvements where convenient. + Replace "aggregate" with "aggregated" where possible. + To lower probability of any future typos in variable names. + Avoid calling Set Numeric Frame Sizes twice. + Code formatting, keyword documentation, code comments, ... + Add TODOs for less important code quality improvements. - Postpone updating of methodology pages to a subsequent change. Change-Id: I4b381e5210e69669f972326202fdcc5a2c9c923b Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-02-16chore(api): use the non-deprecated nat init callVratko Polak1-16/+5
Change-Id: Ic1949c46aa339e66a47a0ebbc428499c5cf9305e Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2022-02-15fix(nat): parse new show nat44 summary outputVratko Polak1-13/+54
+ Keep support for VPP 22.02 CLI output. + Keep tolerating "timed out" sessions for 2202 output. + Subtract timed-out sessions for post-2202 output. + Explain the logic differences in docstring. + Convert the return value to int. Change-Id: I8a119e1034848bfd0fb131cb633e2441b44634a2 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-09-20API: Remove old_cmd supportVratko Polak1-8/+2
Master branch is no longer expected to work with such old VPP builds, and CRC values were removed already anyway. Change-Id: I707a61bc82d7d8998100fcd9fe78b90e7b074675 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-06-17Core: Rework CPU allocationpmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I6826add7b3032041632c3952c45a3c64409400b0
2021-06-10FIX: Pylint reducepmikus1-1/+1
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I909942dbb920df7f0fe15c0c92cda92c3cd8d8ad
2020-12-02API: deprecated NAT APIsJan Gelety1-7/+13
Jira: CSIT-1597 Change-Id: Ib48d20ba087bc9828970c3acc081ac6e4447c20c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-29Support existing test types with ASTFVratko Polak1-2/+34
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety1-1/+67
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety1-2/+28
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30test: compute max_translations_per_thread based on worker threads numberJan Gelety1-0/+16
Change-Id: I1c638aef886bf37a9feb4a29e4949c7c8f19b717 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-24test: nat44det - add session number checkJan Gelety1-1/+33
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety1-44/+96
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety1-33/+115
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-11-28Python3: resources and librariesJan Gelety1-26/+26
Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2019-07-17Use PapiSocketProvider for most PAPI callsVratko Polak1-6/+6
Ticket: CSIT-1541 Ticket: VPP-1722 Ticket: CSIT-1546 + Increase timeout to hide x520 slownes of show hardware detail. - Install sshpass and update ssh client in virl bootstrap. + Added TODOs to remove when CSIT-1546 is fixed. + Enable default socksvr on any startup conf. + Improve OptionString init and repr. - The non-socket executor still kept for stats. + Remove everything unrelated to stats from non-socket executor. - Remove some debug-loooking calls to avoid failures. TODO: Introduce proper parsing to the affected keywords. + Reduce logging from PAPI code to level INFO. - Needs https://gerrit.fd.io/r/20660 to fully work. + Change default values for LocalExecution.run() + Return code check enabled by default. Code is more readable when rc!=0 is allowed explicitly, and the test code will now detect unexpected failures. + Logging disabled by default. Output XML is large already. Important logging can be enabled explicitly. + Restore alphabetical order in common.sh functions. Change-Id: I05882cb6b620ad14638f7404b5ad38c7a5de9e6c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-07-12PapiExecutor always verifiesVratko Polak1-9/+5
Do not support returning unverified replies anymore. Basically, ".get_replies().verify_replies()" is now just ".get_replies()". This allows fairly large simplifications both at call sites and in PapiExecutor.py + Rename get_dumps to get_details. + Introduce get_reply and get_sw_if_index. + Rename variables holding get_*() value, + e.g. get_stats() value is stored to variable named "stats". + Rename "item" of subsequent loop to hint the type instead. + Rename "details" function argument to "verbose". + Process reply details in place, instead of building new list. - Except hybrid blocks which can return both list or single item. - Except human readable text building blocks. + Rename most similar names to sw_if_index. - Except "vpp_sw_index" and some function names. + Use single run_cli_cmd from PapiExecutor. + Do not chain methods over multiple lines. + Small space gain is not worth readability loss. + Include minor code and docstrings improvement. + Add some TODOs. Change-Id: Ib2110a3d2101a74d5837baab3a58dc46aafc6ce3 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-06-19VAT-to-PAPI: NATUtilTibor Frank1-200/+91
Change-Id: Id64bbf899e78c7c55410a8ce608393c22fa596ab Signed-off-by: Tibor Frank <tifrank@cisco.com>
2018-09-05Fix various pylint violationsVratko Polak1-4/+4
+ SchedUtils.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + VatHistory.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + VppCounters.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + Memif.py: ++ Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Either all return statements in a function should return an expression, or none of them should. ++ Update :return: on possible None. + Classify.py: Unnecessary "else" after "return" + ContainerUtils.py: Useless super delegation in method '__init__' + CpuUtils.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + DropRateSearch.py: Either all return statements in a function should return an expression, or none of them should. + IPv4NodeAddress.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Also improve docstrings. + IPv4Setup.py: Useless super delegation in method '__init__' + IPv6Setup.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Also improve docstrings. + IPv6Setup.py: standard import "from ipaddress import IPv6Network" should be placed before "from robot.api import logger" + MacSwap.py: Trailing newlines + NATUtil.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + NodePath.py: Unnecessary "else" after "return" + Tap.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + topology.py: Either all return statements in a function should return an expression, or none of them should. + topology.py: Unnecessary "else" after "return" ++ Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Improve docstrings + DUTSetup.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty ++ Also do not compare int(ret_code) just to access zero-ness. + ssh.py: Do not use `len(SEQUENCE)` to determine if a sequence is empty + InterfaceUtil.py: Unnecessary "else" after "return" Change-Id: Iba4244aa79661ee7df15fed5c7c6dbf04dfa88b2 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2018-04-25Fix warnings reported by gen_doc.shVratko Polak1-7/+7
+ Docstring warnings fixed. + Multiline param descriptions indented by 4 spaces. - Except the PacketVerifier.py one - I have tried several quote-like blocks, nothing works. - Rst warnings not fixed. - How can I fix them? They refer to temporarily created files. + Other improvements: + Python lines no longer than 80 characters. + :return: -> :returns: + Notes before params. + :raises + closing colon after exception class. + Description is a sentence. + Present tense in conditional sentences. + Bumped copyright year in edited files. Change-Id: I462c194eeecb666dc146e26858486a07c990be9b Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2017-08-28FIX: SNAT -> NAT renaming of APIPeter Mikus1-0/+261
- Based on https://gerrit.fd.io/r/#/c/8146/ Change-Id: I774483c7e2b419a9b9b6be78812ecf53a5c91eab Signed-off-by: Peter Mikus <pmikus@cisco.com>