From 1577123a3c27541181097cb4186aa8855f20b1cc Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 21 Jun 2019 12:15:56 +0000 Subject: Align suite/test teardown/setup + Phase II - aligning FUNC/PERF setup. + 2n/3n compatibility of suite setup. + Same structure of testcase for DEV/PERF. + DEVICE tests are now running VPP startup config in same way as PERF. + DEVICE is using COREKEEPER! - DEVICE tests are running topology compute twice for backward compatibility. TODO to remove. - Still phase III needed to align TAGS, LIBRARIES and remove OLD setup phase. Change-Id: Ib6e1b0ebf4abebf3cbe73b4fda5cac953c2a7270 Signed-off-by: Peter Mikus --- resources/libraries/python/InterfaceUtil.py | 3 - resources/libraries/python/VPPUtil.py | 8 +- resources/libraries/robot/crypto/ipsec.robot | 16 - .../libraries/robot/honeycomb/honeycomb.robot | 4 +- .../performance/performance_configuration.robot | 57 +- .../robot/performance/performance_setup.robot | 616 --------------------- resources/libraries/robot/shared/container.robot | 73 +++ resources/libraries/robot/shared/default.robot | 168 +++--- resources/libraries/robot/shared/suite_setup.robot | 246 ++++++++ .../libraries/robot/shared/suite_teardown.robot | 2 +- resources/libraries/robot/shared/test_setup.robot | 57 ++ .../libraries/robot/shared/test_teardown.robot | 27 +- resources/libraries/robot/tcp/tcp_setup.robot | 22 - .../10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot | 6 +- .../10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot | 6 +- ...l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot | 6 +- ...l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot | 6 +- ...lrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot | 10 +- ...lrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot | 10 +- ...lrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot | 10 +- ...lrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot | 10 +- ...lrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot | 10 +- ...ase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot | 10 +- ...ase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot | 10 +- ...ase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot | 10 +- ...ase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot | 10 +- ...ase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot | 10 +- tests/vpp/device/__init__.robot | 2 - ...2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot | 24 +- .../eth2p-eth-l2xcbase-eth-2memif-1dcr-dev.robot | 24 +- .../eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot | 17 +- .../eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot | 15 +- .../crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot | 67 +-- .../crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot | 63 +-- .../crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot | 67 +-- .../crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot | 65 +-- .../eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot | 13 +- .../eth2p-ethip4-ip4base-eth-1tap-dev.robot | 21 +- .../vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot | 28 +- .../vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot | 36 +- .../device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot | 22 +- .../device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot | 22 +- .../eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot | 15 +- .../eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot | 15 +- ...h2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot | 21 +- .../eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot | 20 +- tests/vpp/perf/__init__.robot | 3 - ...t1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot | 18 +- ...eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot | 16 +- ...1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot | 16 +- ...1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot | 16 +- ...1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot | 16 +- ...710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot | 16 +- ...t1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot | 18 +- ...eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot | 16 +- ...1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot | 16 +- ...710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot | 16 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...ec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 14 +- ...ec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 17 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 17 +- ...sec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot | 17 +- ...sec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot | 17 +- ...p4base-policy-aes128cbc-hmac256sha-ndrpdr.robot | 16 +- ...p4base-policy-aes128cbc-hmac512sha-ndrpdr.robot | 16 +- ...1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot | 16 +- ...1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot | 16 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...sec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 14 +- ...sec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 14 +- ...p4base-policy-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...p4base-policy-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot | 14 +- ...1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...psec100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 14 +- ...psec100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 17 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 17 +- ...4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot | 17 +- ...4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot | 17 +- ...p4base-policy-aes128cbc-hmac256sha-ndrpdr.robot | 16 +- ...p4base-policy-aes128cbc-hmac512sha-ndrpdr.robot | 16 +- ...sec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot | 16 +- ...sec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot | 16 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 14 +- ...4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 14 +- ...p4base-policy-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...p4base-policy-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...sec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot | 14 +- ...sec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 14 +- ...ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 14 +- ...4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- ...w-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 14 +- ...sec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot | 14 +- ...sec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot | 14 +- ...spgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot | 14 +- .../ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot | 14 +- .../ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot | 12 +- ...x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot | 12 +- ...2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot | 12 +- ...710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot | 12 +- .../ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot | 12 +- .../ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot | 12 +- ...thip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot | 14 +- ...ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot | 14 +- ...ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot | 16 +- ...ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot | 14 +- ...ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot | 16 +- ...thip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot | 16 +- ...thip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot | 16 +- ...0ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot | 16 +- ...thip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot | 14 +- ...ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot | 14 +- ...ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot | 14 +- ...ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot | 14 +- ...ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot | 14 +- ...hip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot | 14 +- ...thip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot | 14 +- ...ip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot | 16 +- ...udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot | 14 +- ...dp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot | 14 +- ...p-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot | 16 +- ...p-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot | 14 +- ...p-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot | 14 +- .../2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot | 13 +- ...710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot | 12 +- .../2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot | 12 +- ...1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot | 12 +- ...n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot | 12 +- ...2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot | 12 +- ...ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot | 16 +- ...ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot | 16 +- ...thip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot | 16 +- ...thip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot | 16 +- ...0ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot | 14 +- ...an-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot | 12 +- ...vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot | 12 +- ...vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot | 12 +- ...ip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot | 12 +- ...2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot | 12 +- .../ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot | 12 +- ...x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot | 12 +- ...2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot | 12 +- .../ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot | 12 +- .../ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot | 12 +- .../2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot | 12 +- .../2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot | 14 +- ...1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot | 12 +- ...n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot | 12 +- ...2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot | 12 +- .../10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot | 13 +- ...10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot | 14 +- .../l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot | 14 +- .../l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot | 14 +- .../l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot | 12 +- .../10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot | 12 +- .../l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot | 12 +- ...h-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot | 14 +- ...th-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot | 14 +- ...th-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot | 16 +- ...th-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot | 14 +- ...th-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot | 16 +- ...h-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot | 16 +- ...h-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot | 16 +- ...basemaclrn-macip-iacl10sl-100flows-ndrpdr.robot | 14 +- ...asemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot | 14 +- ...basemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot | 14 +- ...dbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot | 14 +- ...basemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot | 14 +- ...dbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot | 14 +- ...basemaclrn-macip-iacl50sl-100flows-ndrpdr.robot | 14 +- ...asemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot | 14 +- ...basemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot | 14 +- .../l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot | 12 +- ...h-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot | 14 +- ...th-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot | 14 +- ...th-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot | 14 +- ...th-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot | 14 +- ...th-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot | 14 +- ...-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot | 14 +- ...h-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot | 14 +- ...0ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot | 12 +- ...10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot | 12 +- .../10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot | 12 +- .../perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot | 12 +- .../perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot | 12 +- ...10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot | 14 +- .../2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot | 14 +- .../2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot | 14 +- ...l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot | 12 +- .../2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot | 12 +- ...n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot | 12 +- ...0ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot | 12 +- ...10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot | 12 +- ...-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot | 12 +- .../l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot | 12 +- .../l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot | 12 +- ...eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot | 16 +- ...eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot | 16 +- ...eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot | 18 +- ...10-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot | 17 +- ...-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot | 16 +- ...eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot | 16 +- ...eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot | 16 +- ...eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...10-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot | 16 +- ...-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot | 16 +- ...0-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot | 12 +- ...0-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot | 12 +- ...0-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot | 12 +- ...x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot | 12 +- ...710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot | 12 +- ...10-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot | 12 +- ...x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot | 10 +- ...-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot | 10 +- ...hip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot | 10 +- ...ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot | 13 +- ...thip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot | 13 +- ...thip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot | 13 +- .../tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot | 12 +- ...2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot | 14 +- ...ot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot | 14 +- ...2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot | 14 +- ...ot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot | 14 +- ...2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...ot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...thip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...thip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...dstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot | 12 +- ...iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot | 12 +- topologies/available/vpp_device.template | 4 + 414 files changed, 3185 insertions(+), 3962 deletions(-) delete mode 100644 resources/libraries/robot/performance/performance_setup.robot create mode 100644 resources/libraries/robot/shared/suite_setup.robot create mode 100644 resources/libraries/robot/shared/test_setup.robot diff --git a/resources/libraries/python/InterfaceUtil.py b/resources/libraries/python/InterfaceUtil.py index 46b1ffb034..34bfc1efe5 100644 --- a/resources/libraries/python/InterfaceUtil.py +++ b/resources/libraries/python/InterfaceUtil.py @@ -1543,9 +1543,6 @@ class InterfaceUtil(object): :rtype: list :raises RuntimeError: If a reason preventing initialization is found. """ - ssh = SSH() - ssh.connect(node) - # Read PCI address and driver. pf_pci_addr = Topology.get_interface_pci_addr(node, ifc_key) pf_mac_addr = Topology.get_interface_mac(node, ifc_key).split(":") diff --git a/resources/libraries/python/VPPUtil.py b/resources/libraries/python/VPPUtil.py index c60509f018..03d39d3e23 100644 --- a/resources/libraries/python/VPPUtil.py +++ b/resources/libraries/python/VPPUtil.py @@ -216,7 +216,7 @@ class VPPUtil(object): host=node['host'], if_data=if_data)) @staticmethod - def vpp_enable_traces_on_dut(node, fail_on_error=True): + def vpp_enable_traces_on_dut(node, fail_on_error=False): """Enable vpp packet traces on the DUT node. :param node: DUT node to set up. @@ -234,14 +234,12 @@ class VPPUtil(object): for cmd in cmds: try: PapiExecutor.run_cli_cmd(node, cmd) - except AssertionError as err: + except AssertionError: if fail_on_error: raise - else: - logger.error(repr(err)) @staticmethod - def vpp_enable_traces_on_all_duts(nodes, fail_on_error=True): + def vpp_enable_traces_on_all_duts(nodes, fail_on_error=False): """Enable vpp packet traces on all DUTs in the given topology. :param nodes: Nodes in the topology. diff --git a/resources/libraries/robot/crypto/ipsec.robot b/resources/libraries/robot/crypto/ipsec.robot index 135881f83e..95fdb9134d 100644 --- a/resources/libraries/robot/crypto/ipsec.robot +++ b/resources/libraries/robot/crypto/ipsec.robot @@ -236,19 +236,3 @@ | | ${args}= | Set Variable If | "${r_tunnel}" == "${None}" | ${args} | | ... | ${args} --dst_tun ${r_tunnel} | | Run Traffic Script On Node | ipsec.py | ${node} | ${args} - -| Set up IPSec SW device functional test -| | [Documentation] -| | ... | Set up IPSec SW device functional test for required IP version. -| | ... -| | ... | *Arguments:* -| | ... | - ${ip_version} - IP version: IPv4 or IPv6. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up IPSec SW device functional test \| IPv4 \| -| | ... -| | [Arguments] | ${ip_version} -| | ... -| | Set up VPP device test -| | Run Keyword | Configure topology for ${ip_version} IPsec testing diff --git a/resources/libraries/robot/honeycomb/honeycomb.robot b/resources/libraries/robot/honeycomb/honeycomb.robot index d446b7ca16..bd392931d8 100644 --- a/resources/libraries/robot/honeycomb/honeycomb.robot +++ b/resources/libraries/robot/honeycomb/honeycomb.robot @@ -233,7 +233,7 @@ | | Restart Vpp Service | ${node} | | Verify Vpp | ${node} | | VPP Enable Traces On DUT | ${node} -| | Configure all TGs for traffic script +| | All TGs Set Interface Default Driver | ${nodes} | | Configure Honeycomb for functional testing | ${node} | | Configure ODL Client for functional testing | ${node} @@ -372,4 +372,4 @@ | | Run Keyword | HC_config.Set SSH Security provider | | Run Keyword | HC_config.Set Memory Size | ${32} | | Run Keyword | HC_config.Set Metaspace Size | ${32} -| | Run Keyword | HC_config.Apply config | ${node} \ No newline at end of file +| | Run Keyword | HC_config.Apply config | ${node} diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 0f13730c66..47dec46d49 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -14,7 +14,7 @@ *** Settings *** | Library | Collections | Library | String -| Library | resources.libraries.python.Classify +| Library | resources.libraries.python.Classify.Classify | Library | resources.libraries.python.DpdkUtil | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.IPUtil @@ -2096,61 +2096,6 @@ | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| Add PCI devices to all DUTs -| | [Documentation] -| | ... | Add PCI devices to VPP configuration file. -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if1} -| | | ${if1_pci}= | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} -| | | ${if1_1_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_1} -| | | ${if1_2_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_2} -| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if2} -| | | ${if2_pci}= | Run Keyword If | '${if2_status}' == 'PASS' -| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} -| | | ${if2_1_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' -| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_1} -| | | ${if2_2_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' -| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_2} -| | | @{pci_devs}= | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | Create List | ${if1_pci} -| | | ... | ELSE -| | | ... | Create List | ${if1_1_pci} | ${if1_2_pci} -| | | Run Keyword If | '${if2_status}' == 'PASS' -| | | ... | Append To List | ${pci_devs} | ${if2_pci} -| | | ... | ELSE -| | | ... | Append To List | ${pci_devs} | ${if2_1_pci} | ${if2_2_pci} -| | | Run keyword | ${dut}.Add DPDK Dev | @{pci_devs} -| | | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | Set Test Variable | ${${dut}_if1_1_pci} | ${if1_1_pci} -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | Set Test Variable | ${${dut}_if1_2_pci} | ${if1_2_pci} -| | | Run Keyword If | '${if2_status}' == 'PASS' -| | | ... | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} -| | | Run Keyword Unless | '${if2_status}' == 'PASS' -| | | ... | Set Test Variable | ${${dut}_if2_1_pci} | ${if2_1_pci} -| | | Run Keyword Unless | '${if2_status}' == 'PASS' -| | | ... | Set Test Variable | ${${dut}_if2_2_pci} | ${if2_2_pci} - -| Add single PCI device to all DUTs -| | [Documentation] -| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on -| | ... | DUT2 to VPP configuration file. -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} -| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} -| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} - | Add VLAN strip offload switch off between DUTs in 3-node single link topology | | [Documentation] | | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot deleted file mode 100644 index 3e27c18d6a..0000000000 --- a/resources/libraries/robot/performance/performance_setup.robot +++ /dev/null @@ -1,616 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.DUTSetup -| Library | resources.tools.wrk.wrk -| Resource | resources/libraries/robot/performance/performance_configuration.robot -| Resource | resources/libraries/robot/performance/performance_limits.robot -| Resource | resources/libraries/robot/performance/performance_utils.robot -| Resource | resources/libraries/robot/tcp/tcp_setup.robot -| Documentation | Performance suite keywords - Suite and test setups and -| ... | teardowns. - -*** Keywords *** - -# Keywords used in setups and teardowns - -| Set variables in 2-node circular topology with DUT interface model -| | [Documentation] -| | ... | Compute path for testing on two given nodes in circular topology -| | ... | based on interface model provided as an argument and set -| | ... | corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if1 - 1st TG interface MAC address. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface MAC address. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - 1st DUT interface towards TG. -| | ... | - dut1_if2 - 2nd DUT interface towards TG. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 2-node circular topology with DUT interface model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path | always_same_link=${FALSE} -| | ${tg_if1} | ${tg}= | First Interface -| | ${dut1_if1} | ${dut1}= | First Ingress Interface -| | ${dut1_if2} | ${dut1}= | Last Egress Interface -| | ${tg_if2} | ${tg}= | Last Interface -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if1_mac} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${tg_if2_mac} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} - -| Set variables in 3-node circular topology with DUT interface model -| | [Documentation] -| | ... | Compute path for testing on three given nodes in circular topology -| | ... | based on interface model provided as an argument and set -| | ... | corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if1 - 1st TG interface MAC address. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface MAC address. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2 - DUT2 node -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 3-node circular topology with DUT interface model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${dut2_if1} | ${dut2}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface -| | ${tg_if2} | ${tg}= | Next Interface -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if1_mac} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${tg_if2_mac} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} -| | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1} -| | Set Suite Variable | ${dut2_if2} - -| Set variables in 3-node circular topology with DUT interface model with double link between DUTs -| | [Documentation] -| | ... | Compute path for testing on three given nodes in circular topology -| | ... | with double link between DUTs based on interface model provided as an -| | ... | argument and set corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if1 - 1st TG interface MAC address. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface MAC address. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2_1 - DUT1 interface 1 towards DUT2. -| | ... | - dut1_if2_2 - DUT1 interface 2 towards DUT2. -| | ... | - dut2 - DUT2 node -| | ... | - dut2_if1_1 - DUT2 interface 1 towards DUT1. -| | ... | - dut2_if1_2 - DUT2 interface 2 towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 3-node circular topology with DUT interface model\ -| | ... | with double link between DUTs \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | # Compute path TG - DUT1 with single link in between -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | # Compute path TG - DUT2 with single link in between -| | Clear Path -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if2} | ${tg}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface -| | # Compute path DUT1 - DUT2 with double link in between -| | Clear Path -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Compute Path | always_same_link=${FALSE} -| | ${dut1_if2_1} | ${dut1}= | First Interface -| | ${dut1_if2_2} | ${dut1}= | Last Interface -| | ${dut2_if1_1} | ${dut2}= | First Ingress Interface -| | ${dut2_if1_2} | ${dut2}= | Last Egress Interface -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | # Set suite variables -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if1_mac} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${tg_if2_mac} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2_1} -| | Set Suite Variable | ${dut1_if2_2} -| | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1_1} -| | Set Suite Variable | ${dut2_if1_2} -| | Set Suite Variable | ${dut2_if2} - -# Suite setups - -| Set up 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${osi_layer} - -| Set up 2-node-switched performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - tg_if1_dest_mac - Interface 1 destination MAC address. Type: string -| | ... | - tg_if2_dest_mac - Interface 2 destination MAC address. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \ -| | ... | \| 22:22:33:44:55:66 \| 22:22:33:44:55:55 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${tg_if1_dest_mac} -| | ... | ${tg_if2_dest_mac} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${osi_layer} -| | ... | ${tg_if1_dest_mac} | ${tg_if2_dest_mac} - -| Set up 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up 3-node performance topology with DUT's NIC model \| L2 \ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${osi_layer} - -| Set up 3-node performance topology with DUT's NIC model with double link between DUTs -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up 3-node performance topology with DUT's NIC model with \ -| | ... | double link between DUTs \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 3-node circular topology with DUT interface model with double link between DUTs -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${osi_layer} - -| Set up DPDK 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. Initializes DPDK test -| | ... | environment. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up DPDK 2-node performance topology with DUT's NIC model \ -| | ... | \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${osi_layer} -| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Set up DPDK 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. Initializes DPDK test -| | ... | environment. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${osi_layer} -| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} - -| Set up SRIOV 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... | It configures PCI device with VFs on all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - vf_driver - Virtual function driver. Type: string -| | ... | - numvfs - Number of VFs. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up SRIOV 2-node performance topology with DUT's NIC model \ -| | ... | \| L2 \| Intel-X520-DA2 \| AVF \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${vf_driver} -| | ... | ${numvfs}=${1} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Run Keyword If | '${vf_driver}' == 'AVF' -| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs} -| | ... | osi_layer=${osi_layer} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut1} | ${dut1_if2_vf0} -| | ... | ${osi_layer} - -| Set up SRIOV 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... | It configures PCI device with VFs on all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - vf_driver - Virtual function driver. Type: string -| | ... | - numvfs - Number of VFs. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up SRIOV 3-node performance topology with DUT's NIC model \ -| | ... | \| L2 \| Intel-X520-DA2 \| AVF \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${vf_driver} -| | ... | ${numvfs}=${1} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_name} -| | Run Keyword If | '${vf_driver}' == 'AVF' -| | ... | Configure AVF interfaces on all DUTs | numvfs=${numvfs} -| | ... | osi_layer=${osi_layer} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut2} | ${dut2_if2_vf0} -| | ... | ${osi_layer} - -| Set up IPSec performance test suite -| | [Documentation] -| | ... | Suite preparation phase that sets default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... | Then it configures crypto device and kernel module on all DUTs. -| | ... -| | ... | TODO CSIT-1481: Crypto HW should be read from topology file instead. -| | ... -| | ... | *Arguments:* -| | ... | - osi_layer - OSI Layer type to initialize TG with. Type: string -| | ... | - nic_name - Interface model. Type: string -| | ... | - crypto_type - Crypto device type - HW_DH895xcc or HW_C3xxx or -| | ... | SW_cryptodev. Type: string, default value: HW_DH895xcc -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up IPSec performance test suite \| L2 \ -| | ... | \| Intel-X520-DA2 \| HW_DH895xcc \| -| | ... -| | [Arguments] | ${osi_layer} | ${nic_name} | ${crypto_type}=HW_DH895xcc -| | ... -| | Set up 3-node performance topology with DUT's NIC model -| | ... | ${osi_layer} | ${nic_name} -| | Return From Keyword If | '${crypto_type}' == 'SW_cryptodev' -| | ${numvfs}= | Set Variable If -| | ... | '${crypto_type}' == 'HW_DH895xcc' | ${32} -| | ... | '${crypto_type}' == 'HW_C3xxx' | ${16} -| | Configure crypto device on all DUTs | ${crypto_type} | numvfs=${numvfs} -| | ... | force_init=${True} -| | Configure kernel module on all DUTs | vfio_pci | force_load=${True} - -| Set up performance test suite with MEMIF -| | [Documentation] -| | ... | Append memif_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | memif_plugin.so - -| Set up performance test suite with NAT -| | [Documentation] -| | ... | Append nat_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | nat_plugin.so - -| Set up performance test suite with ACL -| | [Documentation] -| | ... | Append acl_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | acl_plugin.so - -| Set up performance test suite with AVF driver -| | [Documentation] -| | ... | Append avf_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | avf_plugin.so - -| Set up performance test suite with Static SRv6 proxy -| | [Documentation] -| | ... | Append srv6as_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | srv6as_plugin.so - -| Set up performance test suite with Dynamic SRv6 proxy -| | [Documentation] -| | ... | Append srv6ad_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | srv6ad_plugin.so - -| Set up performance test suite with Masquerading SRv6 proxy -| | [Documentation] -| | ... | Append srv6am_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | srv6am_plugin.so - -| Set up performance test suite with LACP mode link bonding -| | [Documentation] -| | ... | Append lacp_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | lacp_plugin.so - -| Set up performance test suite with crypto ipsecmb -| | [Documentation] -| | ... | Append crypto_ipsecmb_plugin.so to the list of enabled plugins. -| | ... -| | Set Suite Variable | @{plugins_to_enable} -| | Append To List | ${plugins_to_enable} | crypto_ia32_plugin.so -| | Append To List | ${plugins_to_enable} | crypto_ipsecmb_plugin.so -| | Append To List | ${plugins_to_enable} | crypto_openssl_plugin.so - -| Set up 3-node performance topology with wrk and DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that sets the default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets the global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Installs the traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up 3-node performance topology with wrk and DUT's NIC model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${iface_model} -| | Iface update numa node | ${tg} -# Make sure TRex is stopped -| | ${running}= | Is TRex running | ${tg} -| | Run keyword if | ${running}==${True} | Teardown traffic generator | ${tg} -| | ${curr_driver}= | Get PCI dev driver | ${tg} -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} -| | Run keyword if | '${curr_driver}'!='${None}' -| | ... | PCI Driver Unbind | ${tg} | -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} -# Bind tg_if1 to driver specified in the topology -| | ${driver}= | Get Variable Value | ${tg['interfaces']['${tg_if1}']['driver']} -| | PCI Driver Bind | ${tg} -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} | ${driver} -# Set IP on tg_if1 -| | ${intf_name}= | Get Linux interface name | ${tg} -| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.10.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.20.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.30.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.40.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.50.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.60.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.70.1 | 24 -| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.80.1 | 24 -| | Set Linux interface up | ${tg} | ${intf_name} -| | Install wrk | ${tg} - -# Tests setups - -| Set up performance test -| | [Documentation] | Common test setup for performance tests. -| | ... -| | Reset PAPI History On All DUTs | ${nodes} -| | Create base startup configuration of VPP on all DUTs - -| Set up tcp performance test -| | [Documentation] | Common test setup for TCP performance tests. -| | ... -| | Reset PAPI History On All DUTs | ${nodes} -| | Create base startup configuration of VPP for TCP tests on all DUTs - -| Set up performance test with Ligato Kubernetes -| | [Documentation] | Common test setup for performance tests with Ligato \ -| | ... | Kubernetes. -| | ... -| | Apply Kubernetes resource on all duts | ${nodes} | namespaces/csit.yaml -| | Apply Kubernetes resource on all duts | ${nodes} | pods/kafka.yaml -| | Apply Kubernetes resource on all duts | ${nodes} | pods/etcdv3.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | configmaps/vswitch-agent-cfg.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | configmaps/vnf-agent-cfg.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | pods/contiv-sfc-controller.yaml -| | Apply Kubernetes resource on all duts | ${nodes} -| | ... | pods/contiv-vswitch.yaml - -| Set up performance test with containers -| | [Documentation] -| | ... | Common test setup for performance tests with containers -| | ... -| | ... | *Arguments:* -| | ... | - chains: Total number of chains. Type: integer -| | ... | - nodeness: Total number of nodes per chain. Type: integer -| | ... | - auto_scale - If True, use same amount of Dataplane threads for -| | ... | network function as DUT, otherwise use single physical core for -| | ... | every network function. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up performance test with containers \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | Set Test Variable | @{container_groups} | @{EMPTY} -| | Set Test Variable | ${container_group} | CNF -| | Set Test Variable | ${nf_nodes} -| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager -| | ... | engine=${container_engine} | WITH NAME | ${container_group} -| | Construct chains of containers on all DUTs | ${nf_chains} | ${nf_nodes} -| | ... | auto_scale=${auto_scale} -| | Acquire all '${container_group}' containers -| | Create all '${container_group}' containers -| | Configure VPP in all '${container_group}' containers -| | Stop VPP service on all DUTs | ${nodes} -| | Start VPP in all '${container_group}' containers -| | Restart VPP service on all DUTs | ${nodes} -| | Verify VPP on all DUTs | ${nodes} -| | Save VPP PIDs -| | Append To List | ${container_groups} | ${container_group} diff --git a/resources/libraries/robot/shared/container.robot b/resources/libraries/robot/shared/container.robot index c1ab1af18d..0b2fcd489b 100644 --- a/resources/libraries/robot/shared/container.robot +++ b/resources/libraries/robot/shared/container.robot @@ -181,3 +181,76 @@ | | ... | all DUT nodes. | | ... | | Run Keyword | ${group}.Destroy all containers + +| Start containers for performance test +| | [Documentation] +| | ... | Start containers for performance test. +| | ... +| | ... | *Arguments:* +| | ... | - nf_chains: Total number of chains. Type: integer +| | ... | - nf_nodes: Total number of nodes per chain. Type: integer +| | ... | - auto_scale - If True, use same amount of Dataplane threads for +| | ... | network function as DUT, otherwise use single physical core for +| | ... | every network function. Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up performance test with containers \| 1 \| 1 \| +| | ... +| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} +| | ... +| | Set Test Variable | @{container_groups} | @{EMPTY} +| | Set Test Variable | ${container_group} | CNF +| | Set Test Variable | ${nf_nodes} +| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager +| | ... | engine=${container_engine} | WITH NAME | ${container_group} +| | Construct chains of containers on all DUTs | ${nf_chains} | ${nf_nodes} +| | ... | auto_scale=${auto_scale} +| | Acquire all '${container_group}' containers +| | Create all '${container_group}' containers +| | Configure VPP in all '${container_group}' containers +| | Stop VPP service on all DUTs | ${nodes} +| | Start VPP in all '${container_group}' containers +| | Restart VPP service on all DUTs | ${nodes} +| | Verify VPP on all DUTs | ${nodes} +| | Save VPP PIDs +| | Append To List | ${container_groups} | ${container_group} + +| Start containers for device test +| | [Documentation] +| | ... | Start containers for device test. +| | ... +| | ... | *Arguments:* +| | ... | - nf_chains: Total number of chains (Optional). Type: integer, default +| | ... | value: ${1} +| | ... | - nf_nodes: Total number of nodes per chain (Optional). Type: integer, +| | ... | default value: ${1} +| | ... +| | ... | _NOTE:_ This KW sets following test case variables: +| | ... | - dcr_uuid - Parent container UUID. +| | ... | - dcr_root - Parent container overlay. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up functional test with containers \| 1 \| 1 \| +| | ... +| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} +| | ... +| | Set Test Variable | @{container_groups} | @{EMPTY} +| | Set Test Variable | ${container_group} | CNF +| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager +| | ... | engine=${container_engine} | WITH NAME | ${container_group} +| | ... +| | ${dcr_uuid}= | Get Environment Variable | CSIT_DUT1_UUID +| | ${dcr_root}= | Run Keyword | Get Docker Mergeddir | ${nodes['DUT1']} +| | ... | ${dcr_uuid} +| | Set Test Variable | ${dcr_uuid} +| | Set Test Variable | ${dcr_root} +| | ... +| | Construct chains of containers on all DUTs | ${nf_chains} | ${nf_nodes} +| | ... | nested=${True} +| | Acquire all '${container_group}' containers +| | Create all '${container_group}' containers +| | Configure VPP in all '${container_group}' containers +| | Start VPP in all '${container_group}' containers +| | Append To List | ${container_groups} | ${container_group} diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot index b7e4a75773..31c4ae3e0a 100644 --- a/resources/libraries/robot/shared/default.robot +++ b/resources/libraries/robot/shared/default.robot @@ -33,18 +33,18 @@ | Library | resources.libraries.python.Trace | Library | resources.libraries.python.topology.Topology | ... +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/performance/performance_configuration.robot +| Resource | resources/libraries/robot/performance/performance_limits.robot +| Resource | resources/libraries/robot/performance/performance_utils.robot | Resource | resources/libraries/robot/shared/container.robot | Resource | resources/libraries/robot/shared/qemu.robot | Resource | resources/libraries/robot/shared/suite_teardown.robot +| Resource | resources/libraries/robot/shared/suite_setup.robot | Resource | resources/libraries/robot/shared/test_teardown.robot - +| Resource | resources/libraries/robot/shared/test_setup.robot *** Keywords *** -| Configure all TGs for traffic script -| | [Documentation] | Prepare all TGs before traffic scripts execution. -| | ... -| | All TGs Set Interface Default Driver | ${nodes} - | Show Vpp Errors On All DUTs | | [Documentation] | Show VPP errors verbose on all DUTs. | | ... @@ -59,14 +59,6 @@ | | :FOR | ${dut} | IN | @{duts} | | | Vpp Get Bridge Domain Data | ${nodes['${dut}']} -| Setup Scheduler Policy for Vpp On All DUTs -| | [Documentation] | Set realtime scheduling policy (SCHED_RR) with priority 1 -| | ... | on all VPP worker threads on all DUTs. -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Set VPP Scheduling rr | ${nodes['${dut}']} - | Configure crypto device on all DUTs | | [Documentation] | Verify if Crypto QAT device virtual functions are | | ... | initialized on all DUTs. If parameter force_init is set to True, then @@ -85,37 +77,10 @@ | | ... | | [Arguments] | ${crypto_type} | ${numvfs} | ${force_init}=${False} | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Crypto Device Verify | ${nodes['${dut}']} | ${crypto_type} | | | ... | ${numvfs} | force_init=${force_init} -| Configure AVF interfaces on all DUTs -| | [Documentation] | Configure virtual functions for AVF interfaces on PCI -| | ... | interface on all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - numvfs - Number of VFs to initialize, 0 - disable the VFs -| | ... | (Optional). Type: integer, default value: ${1} -| | ... | - osi_layer - OSI Layer type to initialize TG with. -| | ... | (Optional). Type: string, default value: L2 -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure AVF device on all DUTs \| ${1} \| L2 \| -| | ... -| | [Arguments] | ${numvfs}=${1} | ${osi_layer}=L2 -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_avf_arr}= | Init AVF interface | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | numvfs=${numvfs} | osi_layer=${osi_layer} -| | | ${if2_avf_arr}= | Init AVF interface | ${nodes['${dut}']} | ${${dut}_if2} -| | | ... | numvfs=${numvfs} | osi_layer=${osi_layer} -# Currently only one AVF is supported. -| | | Set Suite Variable | ${${dut}_if1_vf0} | ${if1_avf_arr[0]} -| | | Set Suite Variable | ${${dut}_if2_vf0} | ${if2_avf_arr[0]} - | Configure kernel module on all DUTs | | [Documentation] | Verify if specific kernel module is loaded on all DUTs. | | ... | If parameter force_load is set to True, then try to load. @@ -136,7 +101,6 @@ | Create base startup configuration of VPP on all DUTs | | [Documentation] | Create base startup configuration of VPP to all DUTs. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Import Library | resources.libraries.python.VppConfigGenerator | | | ... | WITH NAME | ${dut} @@ -176,7 +140,6 @@ | | ... | | ${cpu_count_int} | Convert to Integer | ${phy_cores} | | ${thr_count_int} | Convert to Integer | ${phy_cores} -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | ${if1_status} | ${value}= | Run Keyword And Ignore Error | | | ... | Variable Should Exist | ${${dut}_if1} @@ -241,7 +204,6 @@ | | ... | | ${cpu_count_int} | Convert to Integer | ${phy_cores} | | ${thr_count_int} | Convert to Integer | ${phy_cores} -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']} | | | ... | ${${dut}_if1} | ${${dut}_if2} @@ -289,17 +251,68 @@ | | ... | cpu_skip=${cpu_skip} | filename=/tmp/vnf${i}.conf | | ... | i=${i_int} +| Add PCI devices to all DUTs +| | [Documentation] +| | ... | Add PCI devices to VPP configuration file. +| | ... +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | ${if1_pci}= | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} +| | | ${if1_1_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | ${if1_2_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_2} +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | ${if2_pci}= | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} +| | | ${if2_1_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_1} +| | | ${if2_2_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_2} +| | | @{pci_devs}= | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Create List | ${if1_pci} +| | | ... | ELSE +| | | ... | Create List | ${if1_1_pci} | ${if1_2_pci} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Append To List | ${pci_devs} | ${if2_pci} +| | | ... | ELSE +| | | ... | Append To List | ${pci_devs} | ${if2_1_pci} | ${if2_2_pci} +| | | Run keyword | ${dut}.Add DPDK Dev | @{pci_devs} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_1_pci} | ${if1_1_pci} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_2_pci} | ${if1_2_pci} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_1_pci} | ${if2_1_pci} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_2_pci} | ${if2_2_pci} + +| Add single PCI device to all DUTs +| | [Documentation] +| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on +| | ... | DUT2 to VPP configuration file. +| | ... +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} +| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} +| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} + | Add no multi seg to all DUTs | | [Documentation] | Add No Multi Seg to VPP startup configuration to all DUTs. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Add DPDK No Multi Seg | Add DPDK no PCI to all DUTs | | [Documentation] | Add DPDK no-pci to VPP startup configuration to all DUTs. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Add DPDK no PCI @@ -316,7 +329,6 @@ | | ... | | [Arguments] | ${rxd} | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Add DPDK Dev Default RXD | ${rxd} @@ -333,7 +345,6 @@ | | ... | | [Arguments] | ${txd} | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Add DPDK Dev Default TXD | ${txd} @@ -350,14 +361,12 @@ | | ... | | [Arguments] | ${uio_driver} | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Add DPDK Uio Driver | ${uio_driver} | Add NAT to all DUTs | | [Documentation] | Add NAT configuration to all DUTs. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Add NAT @@ -372,7 +381,7 @@ | | ... | \| Add cryptodev to all DUTs \| ${4} \| | | ... | | [Arguments] | ${count} -| | ${duts}= | Get Matches | ${nodes} | DUT* +| | ... | | :FOR | ${dut} | IN | @{duts} | | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']} | | | ${thr_count_int}= | Run keyword if | ${smt_used} @@ -413,7 +422,6 @@ | Write startup configuration on all VPP DUTs | | [Documentation] | Write VPP startup configuration on all DUTs. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Write Config @@ -421,7 +429,6 @@ | | [Documentation] | Write VPP startup configuration and restart VPP on all | | ... | DUTs. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Run keyword | ${dut}.Apply Config | | Save VPP PIDs @@ -435,6 +442,7 @@ | | ... | | ${setup_vpp_pids}= | Get VPP PIDs | ${nodes} | | ${keys}= | Get Dictionary Keys | ${setup_vpp_pids} +| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${key} | IN | @{keys} | | | ${pid}= | Get From Dictionary | ${setup_vpp_pids} | ${key} | | | Run Keyword If | $pid is None | FAIL | No VPP PID found on node ${key} @@ -462,7 +470,7 @@ | | Verify Vpp On All Duts | ${nodes} | | VPP Enable Traces On All Duts | ${nodes} | | Save VPP PIDs -| | Configure all TGs for traffic script +| | All TGs Set Interface Default Driver | ${nodes} | | Update All Interface Data On All Nodes | ${nodes} | | Reset PAPI History On All DUTs | ${nodes} @@ -475,19 +483,6 @@ | | Vpp Show Errors On All DUTs | ${nodes} | | Verify VPP PID in Teardown -| Set up VPP device test -# TODO: Generalize this KW if it will not diverge from Functional derivate too -# much -| | [Documentation] | Common test setup for vpp-device tests. -| | ... -| | Restart Vpp Service On All Duts | ${nodes} -| | Verify Vpp On All Duts | ${nodes} -| | VPP Enable Traces On All Duts | ${nodes} -| | Save VPP PIDs -| | Configure all TGs for traffic script -| | Update All Interface Data On All Nodes | ${nodes} | skip_tg_udev=${True} -| | Reset PAPI History On All DUTs | ${nodes} - | Tear down LISP functional test | | [Documentation] | Common test teardown for functional tests with LISP. | | ... @@ -499,45 +494,6 @@ | | Vpp Show Errors On All DUTs | ${nodes} | | Verify VPP PID in Teardown -| Set up functional test with containers -| | [Documentation] -| | ... | Common test setup for functional tests with containers. -| | ... -| | ... | *Arguments:* -| | ... | - chains: Total number of chains (Optional). Type: integer, default -| | ... | value: ${1} -| | ... | - nodeness: Total number of nodes per chain (Optional). Type: integer, -| | ... | default value: ${1} -| | ... -| | ... | _NOTE:_ This KW sets following test case variables: -| | ... | - dcr_uuid - Parent container UUID. -| | ... | - dcr_root - Parent container overlay. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up functional test with containers \| 1 \| 1 \| -| | ... -| | [Arguments] | ${chains}=${1} | ${nodeness}=${1} -| | ... -| | Set Test Variable | @{container_groups} | @{EMPTY} -| | Set Test Variable | ${container_group} | CNF -| | Import Library | resources.libraries.python.ContainerUtils.ContainerManager -| | ... | engine=${container_engine} | WITH NAME | ${container_group} -| | ... -| | ${dcr_uuid}= | Get Environment Variable | CSIT_DUT1_UUID -| | ${dcr_root}= | Run Keyword | Get Docker Mergeddir | ${nodes['DUT1']} -| | ... | ${dcr_uuid} -| | Set Test Variable | ${dcr_uuid} -| | Set Test Variable | ${dcr_root} -| | ... -| | Construct chains of containers on all DUTs | ${chains} | ${nodeness} -| | ... | nested=${True} -| | Acquire all '${container_group}' containers -| | Create all '${container_group}' containers -| | Configure VPP in all '${container_group}' containers -| | Start VPP in all '${container_group}' containers -| | Append To List | ${container_groups} | ${container_group} - | Stop VPP Service on DUT | | [Documentation] | Stop the VPP service on the specified node. | | ... diff --git a/resources/libraries/robot/shared/suite_setup.robot b/resources/libraries/robot/shared/suite_setup.robot new file mode 100644 index 0000000000..30fb5ac206 --- /dev/null +++ b/resources/libraries/robot/shared/suite_setup.robot @@ -0,0 +1,246 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Keywords used in suite setups.""" + +*** Settings *** +| Library | resources.libraries.python.DPDK.DPDKTools +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.TrafficGenerator +| Library | resources.tools.wrk.wrk +| ... +| Documentation | Suite setup keywords. + +*** Keywords *** +| Setup suite single link +| | [Documentation] +| | ... | Common suite setup for single link tests. +| | ... | +| | ... | Compute path for testing on two given nodes in circular topology +| | ... | based on interface model provided as an argument and set +| | ... | corresponding suite variables. +| | ... +| | ... | _NOTE:_ This KW sets following suite variables: +| | ... | - duts - List of DUT nodes +| | ... | - duts_count - Number of DUT nodes. +| | ... | - tg - TG node +| | ... | - tg_if1 - 1st TG interface towards DUT. +| | ... | - tg_if1_mac - 1st TG interface MAC address. +| | ... | - tg_if2 - 2nd TG interface towards DUT. +| | ... | - tg_if2_mac - 2nd TG interface MAC address. +| | ... | - dut{n} - DUTx node +| | ... | - dut{n}_if1 - 1st DUT interface. +| | ... | - dut{n}_if1_mac - 1st DUT interface MAC address. +| | ... | - dut{n}_if2 - 2nd DUT interface. +| | ... | - dut{n}_if2_mac - 2nd DUT interface MAC address. +| | ... +| | ... | *Arguments:* +| | ... | - ${actions} - Additional setup action. Type: list +| | ... +| | [Arguments] | @{actions} +| | ... +| | ${nic_model_list}= | Create list | ${nic_name} +| | Append Node | ${nodes['TG']} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Append Node | ${nodes['${dut}']} | filter_list=${nic_model_list} +| | Append Node | ${nodes['TG']} +| | Compute Path | always_same_link=${FALSE} +| | ${tg_if1} | ${tg}= | Next Interface +| | :FOR | ${dut} | IN | @{duts} +| | | ${dutx_if1} | ${dutx}= | Next Interface +| | | ${dutx_if2} | ${dutx}= | Next Interface +| | | ${dutx_if1_mac}= | Get Interface MAC | ${dutx} | ${dutx_if1} +| | | ${dutx_if2_mac}= | Get Interface MAC | ${dutx} | ${dutx_if2} +| | | ${dut_str}= | Convert To Lowercase | ${dut} +| | | Set Suite Variable | ${${dut_str}} | ${dutx} +| | | Set Suite Variable | ${${dut_str}_if1} | ${dutx_if1} +| | | Set Suite Variable | ${${dut_str}_if2} | ${dutx_if2} +| | | Set Suite Variable | ${${dut_str}_if1_mac} | ${dutx_if1_mac} +| | | Set Suite Variable | ${${dut_str}_if2_mac} | ${dutx_if2_mac} +| | ${tg_if2} | ${tg}= | Next Interface +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${duts_count}= | Get Length | ${duts} +| | Set Suite Variable | ${duts} +| | Set Suite Variable | ${duts_count} +| | Set Suite Variable | ${tg} +| | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if1_mac} +| | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${tg_if2_mac} +| | :FOR | ${action} | IN | @{actions} +| | | Run Keyword | Additional Suite setup Action For ${action} + +| Setup suite double link +| | [Documentation] +| | ... | Common suite setup for double link tests. +| | ... | +| | ... | Compute path for testing on three given nodes in circular topology +| | ... | with double link between DUTs based on interface model provided as an +| | ... | argument and set corresponding suite variables. +| | ... +| | ... | *Arguments:* +| | ... | - ${actions} - Additional setup action. Type: list +| | ... +| | ... | _NOTE:_ This KW sets following suite variables: +| | ... | - duts - List of DUT nodes +| | ... | - duts_count - Number of DUT nodes. +| | ... | - tg - TG node +| | ... | - tg_if1 - 1st TG interface towards DUT. +| | ... | - tg_if1 - 1st TG interface MAC address. +| | ... | - tg_if2 - 2nd TG interface towards DUT. +| | ... | - tg_if2 - 2nd TG interface MAC address. +| | ... | - dut1 - DUT1 node +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2_1 - DUT1 interface 1 towards DUT2. +| | ... | - dut1_if2_2 - DUT1 interface 2 towards DUT2. +| | ... | - dut2 - DUT2 node +| | ... | - dut2_if1_1 - DUT2 interface 1 towards DUT1. +| | ... | - dut2_if1_2 - DUT2 interface 2 towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. +| | ... +| | [Arguments] | @{actions} +| | ... +| | ${nic_model_list}= | Create list | ${nic_name} +| | # Compute path TG - DUT1 with single link in between +| | Append Node | ${nodes['TG']} +| | Append Node | ${nodes['DUT1']} | filter_list=${nic_model_list} +| | Append Node | ${nodes['TG']} +| | Compute Path +| | ${tg_if1} | ${tg}= | Next Interface +| | ${dut1_if1} | ${dut1}= | Next Interface +| | # Compute path TG - DUT2 with single link in between +| | Clear Path +| | Append Node | ${nodes['TG']} +| | Append Node | ${nodes['DUT2']} | filter_list=${nic_model_list} +| | Append Node | ${nodes['TG']} +| | Compute Path +| | ${tg_if2} | ${tg}= | Next Interface +| | ${dut2_if2} | ${dut2}= | Next Interface +| | # Compute path DUT1 - DUT2 with double link in between +| | Clear Path +| | Append Node | ${nodes['DUT1']} | filter_list=${nic_model_list} +| | Append Node | ${nodes['DUT2']} | filter_list=${nic_model_list} +| | Append Node | ${nodes['DUT1']} | filter_list=${nic_model_list} +| | Compute Path | always_same_link=${FALSE} +| | ${dut1_if2_1} | ${dut1}= | First Interface +| | ${dut1_if2_2} | ${dut1}= | Last Interface +| | ${dut2_if1_1} | ${dut2}= | First Ingress Interface +| | ${dut2_if1_2} | ${dut2}= | Last Egress Interface +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${duts_count}= | Set Variable | 2 +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | # Set suite variables +| | Set Suite Variable | ${duts} +| | Set Suite Variable | ${duts_count} +| | Set Suite Variable | ${tg} +| | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if1_mac} +| | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${tg_if2_mac} +| | Set Suite Variable | ${dut1} +| | Set Suite Variable | ${dut1_if1} +| | Set Suite Variable | ${dut1_if2_1} +| | Set Suite Variable | ${dut1_if2_2} +| | Set Suite Variable | ${dut2} +| | Set Suite Variable | ${dut2_if1_1} +| | Set Suite Variable | ${dut2_if1_2} +| | Set Suite Variable | ${dut2_if2} +| | :FOR | ${action} | IN | @{actions} +| | | Run Keyword | Additional Suite setup Action For ${action} + +| Additional Suite Setup Action For performance +| | [Documentation] +| | ... | Additional Setup for suites which uses performance measurement. +| | ... +| | Run Keyword If | ${duts_count} == 1 +| | ... | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${osi_layer} +| | Run Keyword If | ${duts_count} == 2 +| | ... | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${osi_layer} + +| Additional Suite Setup Action For dpdk +| | [Documentation] +| | ... | Additional Setup for suites which uses dpdk. +| | ... +| | :FOR | ${dut} | IN | @{duts} +| | | ${dut_str}= | Convert To Lowercase | ${dut} +| | | Initialize DPDK Environment | ${nodes['${dut}']} +| | | ... | ${${dut_str}_if1} | ${${dut_str}_if2} + +| Additional Suite Setup Action For performance_avf +| | [Documentation] +| | ... | Additional Setup for suites which uses performance measurement over +| | ... | SRIOV AVF. +| | ... +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_avf_arr}= | Init AVF interface | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | numvfs=${1} | osi_layer=${osi_layer} +| | | ${if2_avf_arr}= | Init AVF interface | ${nodes['${dut}']} | ${${dut}_if2} +| | | ... | numvfs=${1} | osi_layer=${osi_layer} +# Currently only one AVF is supported. +| | | Set Suite Variable | ${${dut}_if1_vf0} | ${if1_avf_arr[0]} +| | | Set Suite Variable | ${${dut}_if2_vf0} | ${if2_avf_arr[0]} +| | Run Keyword If | ${duts_count} == 1 +| | ... | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut1} | ${dut1_if2_vf0} | ${osi_layer} +| | Run Keyword If | ${duts_count} == 2 +| | ... | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1_vf0} | ${dut2} | ${dut2_if2_vf0} | ${osi_layer} + +| Additional Suite Setup Action For ipsechw +| | [Documentation] +| | ... | Additional Setup for suites which uses QAT HW. +| | ... +| | ${numvfs}= | Set Variable If +| | ... | '${crypto_type}' == 'HW_DH895xcc' | ${32} +| | ... | '${crypto_type}' == 'HW_C3xxx' | ${16} +| | Configure crypto device on all DUTs | ${crypto_type} | numvfs=${numvfs} +| | ... | force_init=${True} +| | Configure kernel module on all DUTs | vfio_pci | force_load=${True} + +| Additional Suite Setup Action For wrk +| | [Documentation] +| | ... | Additional Setup for suites which uses WRK TG. +| | ... +| | Iface update numa node | ${tg} +# Make sure TRex is stopped +| | ${running}= | Is TRex running | ${tg} +| | Run keyword if | ${running}==${True} | Teardown traffic generator | ${tg} +| | ${curr_driver}= | Get PCI dev driver | ${tg} +| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} +| | Run keyword if | '${curr_driver}'!='${None}' +| | ... | PCI Driver Unbind | ${tg} | +| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} +# Bind tg_if1 to driver specified in the topology +| | ${driver}= | Get Variable Value | ${tg['interfaces']['${tg_if1}']['driver']} +| | PCI Driver Bind | ${tg} +| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} | ${driver} +# Set IP on tg_if1 +| | ${intf_name}= | Get Linux interface name | ${tg} +| | ... | ${tg['interfaces']['${tg_if1}']['pci_address']} +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.10.1 | 24 +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.20.1 | 24 +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.30.1 | 24 +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.40.1 | 24 +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.50.1 | 24 +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.60.1 | 24 +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.70.1 | 24 +| | Set Linux interface IP | ${tg} | ${intf_name} | 192.168.80.1 | 24 +| | Set Linux interface up | ${tg} | ${intf_name} +| | Install wrk | ${tg} diff --git a/resources/libraries/robot/shared/suite_teardown.robot b/resources/libraries/robot/shared/suite_teardown.robot index 1b738eaeef..e5db4f05d8 100644 --- a/resources/libraries/robot/shared/suite_teardown.robot +++ b/resources/libraries/robot/shared/suite_teardown.robot @@ -15,6 +15,7 @@ *** Settings *** | Library | resources.libraries.python.DPDK.DPDKTools +| Library | resources.libraries.python.TrafficGenerator | ... | Documentation | Suite teardown keywords. @@ -41,7 +42,6 @@ | | [Documentation] | | ... | Additional teardown for suites which uses dpdk. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Cleanup DPDK Environment | | | ... | ${nodes['${dut}']} | ${${dut}_if1} | ${${dut}_if2} diff --git a/resources/libraries/robot/shared/test_setup.robot b/resources/libraries/robot/shared/test_setup.robot new file mode 100644 index 0000000000..17e9e6c459 --- /dev/null +++ b/resources/libraries/robot/shared/test_setup.robot @@ -0,0 +1,57 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Keywords used in test setups.""" + +*** Settings *** +| Library | resources.libraries.python.PapiHistory +| ... +| Documentation | Test Setup keywords. + +*** Keywords *** +| Setup test +| | [Documentation] +| | ... | Common test setup for tests. +| | ... +| | ... | *Arguments:* +| | ... | - ${actions} - Additional setup action. Type: list +| | ... +| | [Arguments] | @{actions} +| | ... +| | Reset PAPI History On All DUTs | ${nodes} +| | Create base startup configuration of VPP on all DUTs +| | :FOR | ${action} | IN | @{actions} +| | | Run Keyword | Additional Test Setup Action For ${action} + +| Additional Test Setup Action For namespace +| | [Documentation] +| | ... | Additional Setup for tests which uses namespace. +| | ... +| | :FOR | ${dut} | IN | @{duts} +| | | Clean Up Namespaces | ${nodes['${dut}']} + +| Additional Test Setup Action For ligato +| | [Documentation] +| | ... | Additional Setup for tests which uses Ligato Kubernetes. +| | ... +| | Apply Kubernetes resource on all duts | ${nodes} | namespaces/csit.yaml +| | Apply Kubernetes resource on all duts | ${nodes} | pods/kafka.yaml +| | Apply Kubernetes resource on all duts | ${nodes} | pods/etcdv3.yaml +| | Apply Kubernetes resource on all duts | ${nodes} +| | ... | configmaps/vswitch-agent-cfg.yaml +| | Apply Kubernetes resource on all duts | ${nodes} +| | ... | configmaps/vnf-agent-cfg.yaml +| | Apply Kubernetes resource on all duts | ${nodes} +| | ... | pods/contiv-sfc-controller.yaml +| | Apply Kubernetes resource on all duts | ${nodes} +| | ... | pods/contiv-vswitch.yaml diff --git a/resources/libraries/robot/shared/test_teardown.robot b/resources/libraries/robot/shared/test_teardown.robot index e30aa9f41e..f95e369b65 100644 --- a/resources/libraries/robot/shared/test_teardown.robot +++ b/resources/libraries/robot/shared/test_teardown.robot @@ -14,6 +14,11 @@ """Keywords used in test teardowns.""" *** Settings *** +| Resource | resources/libraries/robot/shared/container.robot +| Resource | resources/libraries/robot/shared/qemu.robot +| Library | resources.libraries.python.PapiHistory +| Library | resources.libraries.python.topology.Topology +| ... | Documentation | Test teardown keywords. *** Keywords *** @@ -28,8 +33,10 @@ | | ... | | Remove All Added Ports On All DUTs From Topology | ${nodes} | | Show PAPI History On All DUTs | ${nodes} -| | Get Core Files on All Nodes | ${nodes} -| | Verify VPP PID in Teardown +| | Run Keyword If Test Failed +| | ... | Get Core Files on All Nodes | ${nodes} +| | Run Keyword If Test Failed +| | ... | Verify VPP PID in Teardown | | :FOR | ${action} | IN | @{actions} | | | Run Keyword | Additional Test Tear Down Action For ${action} @@ -59,7 +66,6 @@ | | [Documentation] | | ... | Additional teardown for tests which uses vhost(s) and VM(s). | | ... -| | # TODO: Remove IF condition once devicetest is running KernelVM. | | Show VPP vhost on all DUTs | ${nodes} | | Run Keyword If | "PERFTEST" in @{TEST TAGS} | vnf_manager.Kill All VMs | | Run Keyword If | "DEVICETEST" in @{TEST TAGS} | vm_node.Qemu Kill @@ -68,15 +74,14 @@ | | [Documentation] | | ... | Additional teardown for tests which uses NAT feature. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | Show NAT verbose | ${nodes['${dut}']} +| | | Run Keyword If Test Failed +| | | ... | Show NAT verbose | ${nodes['${dut}']} | Additional Test Tear Down Action For namespace | | [Documentation] | | ... | Additional teardown for tests which uses namespace. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Clean Up Namespaces | ${nodes['${dut}']} @@ -84,7 +89,6 @@ | | [Documentation] | | ... | Additional teardown for tests which uses linux_bridge. | | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Linux Del Bridge | ${nodes['${dut}']} | ${bid_TAP} @@ -94,16 +98,16 @@ | | ... | | Run Keyword If Test Failed | | ... | Vpp Log Plugin Acl Settings | ${dut1} -| | Run Keyword If Test Failed | Run Keyword And Ignore Error +| | Run Keyword If Test Failed | | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} | Additional Test Tear Down Action For macipacl | | [Documentation] | | ... | Additional teardown for tests which uses MACIP ACL feature. | | ... -| | Run Keyword If Test Failed | Run Keyword And Ignore Error +| | Run Keyword If Test Failed | | ... | Vpp Log Macip Acl Settings | ${dut1} -| | Run Keyword And Ignore Error +| | Run Keyword If Test Failed | | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} | Additional Test Tear Down Action For srv6 @@ -114,7 +118,8 @@ | | ... | Show SR Policies on all DUTs | ${nodes} | | Run Keyword If Test Failed | | ... | Show SR Steering Policies on all DUTs | ${nodes} -| | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes} +| | Run Keyword If Test Failed +| | ... | Show SR LocalSIDs on all DUTs | ${nodes} | Additional Test Tear Down Action For ligato | | [Documentation] diff --git a/resources/libraries/robot/tcp/tcp_setup.robot b/resources/libraries/robot/tcp/tcp_setup.robot index 8a39a0bc4a..39a570c20a 100644 --- a/resources/libraries/robot/tcp/tcp_setup.robot +++ b/resources/libraries/robot/tcp/tcp_setup.robot @@ -21,28 +21,6 @@ | Documentation | L2 keywords to set up VPP to test tcp. *** Keywords *** -| Create base startup configuration of VPP for TCP tests on all DUTs -| | [Documentation] | Create base startup configuration of VPP for TCP related -| | ... | tests to all DUTs. -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Import Library | resources.libraries.python.VppConfigGenerator -| | | ... | WITH NAME | ${dut} -| | | Run keyword | ${dut}.Set Node | ${nodes['${dut}']} -| | | Run keyword | ${dut}.Add Unix Log -| | | Run keyword | ${dut}.Add Unix CLI Listen -| | | Run keyword | ${dut}.Add Unix Nodaemon -| | | Run keyword | ${dut}.Add DPDK Socketmem | 4096,4096 -| | | Run keyword | ${dut}.Add DPDK Log Level | debug -| | | Run keyword | ${dut}.Add DPDK Uio Driver -| | | Run keyword | ${dut}.Add Heapsize | 4G -| | | Run keyword | ${dut}.Add Plugin | disable | default -| | | Run keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable} -| | | Run keyword | ${dut}.Add IP6 Hash Buckets | 2000000 -| | | Run keyword | ${dut}.Add IP6 Heap Size | 4G -| | | Run keyword | ${dut}.Add IP Heap Size | 4G - | Set up HTTP server with paramters on the VPP node | | [Documentation] | | ... | Configure IP address on the port, set it up and start HTTP server on diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot index 26b05c8378..99f83482d6 100644 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot @@ -12,15 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/dpdk/default.robot | Library | resources.libraries.python.DPDK.DPDKTools | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA | ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE | ... -| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | dpdk | Suite Teardown | Tear down suite | performance | dpdk | ... | Test Template | Local Template @@ -44,6 +43,7 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. *** Variables *** +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: diff --git a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot index d4c6c381a0..856db6f559 100644 --- a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot +++ b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -12,15 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/dpdk/default.robot | Library | resources.libraries.python.DPDK.DPDKTools | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA | ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH | ... -| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | dpdk | Suite Teardown | Tear down suite | performance | dpdk | ... | Test Template | Local Template @@ -44,6 +43,7 @@ | ... | interfaces. *** Variables *** +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot index 0f018b3f8f..f0f537d32f 100644 --- a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot +++ b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot @@ -12,15 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/dpdk/default.robot | Library | resources.libraries.python.DPDK.DPDKTools | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA | ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE | ... -| Suite Setup | Set up DPDK 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | dpdk | Suite Teardown | Tear down suite | performance | dpdk | ... | Test Template | Local Template @@ -44,6 +43,7 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. *** Variables *** +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot index ae5932e73f..5aaf756974 100644 --- a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot +++ b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -12,15 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/dpdk/default.robot | Library | resources.libraries.python.DPDK.DPDKTools | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA | ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH | ... -| Suite Setup | Set up DPDK 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | dpdk | Suite Teardown | Tear down suite | performance | dpdk | ... | Test Template | Local Template @@ -44,6 +43,7 @@ | ... | interfaces. *** Variables *** +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot index 8fad8c64d7..5110419103 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF | ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot index cfa9cbc395..abaf83ebd7 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF | ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot index 78ee42f67e..0fd00e52e3 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF | ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot index a3a9c08e1c..2e0e14e66b 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF | ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot index 99e5deee91..baf3cb029e 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF | ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot index ca72c311b8..679e9ac421 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-1drcl2xc-1paral-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF | ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot index e018bf1146..9035986688 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-2drcl2xc-1horiz-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF | ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot index 4be47e61fd..fe1bed40a5 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-2memif-4drcl2xc-1horiz-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF | ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot index 66c47034ae..abf4311b3f 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-4memif-2drcl2xc-1chain-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF | ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot index 2cfc9bd1b4..36a3fce3ff 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x710-eth-1drcl2xcbase-eth-8memif-4drcl2xc-1chain-k8s-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF | ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test with Ligato Kubernetes +| Test Setup | Setup test | ligato | Test Teardown | Tear down test | ligato | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # SFC profile diff --git a/tests/vpp/device/__init__.robot b/tests/vpp/device/__init__.robot index 56ce814b26..d7e3990e7f 100644 --- a/tests/vpp/device/__init__.robot +++ b/tests/vpp/device/__init__.robot @@ -39,8 +39,6 @@ | | ... | - dut_stats - Switch to enable DUT statistics | | ... | - vm_image - Guest VM disk image. | | ... | - packages_dir - Path to directory where VPP packages are stored. -| | ... | - vpp_rpm_pkgs - Package list for CentOS based system. -| | ... | - vpp_deb_pkgs - Package list for Debian based system. | | ... | | Set Global Variable | ${pkt_trace} | ${False} | | Set Global Variable | ${dut_stats} | ${True} diff --git a/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot index b504507a25..6d4cffd834 100644 --- a/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot +++ b/tests/vpp/device/container_memif/eth2p-eth-l2bdbasemaclrn-eth-2memif-1dcr-dev.robot @@ -12,17 +12,16 @@ # limitations under the License. *** Settings *** +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot | Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/memif.robot | Resource | resources/libraries/robot/shared/testing_path.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | L2BDMACLRN | BASE | ETH | MEMIF | DOCKER | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | container | ... | Documentation | *L2 bridge-domain test cases with memif interface* @@ -41,6 +40,8 @@ | ... | src-addr, dst-addr and MAC addresses.pecifications:* RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${nic_name}= | virtual # L2BD | ${bd_id1}= | 1 | ${bd_id2}= | 2 @@ -50,7 +51,6 @@ | ${container_engine}= | Docker | ${container_chain_topology}= | chain_functional -# TODO: Add update of VPP PIDs after container creation *** Test Cases *** | tc01-eth2p-ethip4-l2bdbase-eth-2memif-1dcr-device | | [Documentation] @@ -61,9 +61,12 @@ | | ... | two of its interfaces to be switched by DUT1; verify all packets are \ | | ... | received. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set up functional test with containers +| | And Start containers for device test | | And Configure interfaces in path up | | When Set up memif interfaces on DUT node | ${dut_node} | ${sock_base} | | ... | ${sock_base} | dcr_uuid=${dcr_uuid} @@ -90,9 +93,12 @@ | | ... | two of its interfaces to be switched by DUT1; verify all packets are \ | | ... | received. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set up functional test with containers +| | And Start containers for device test | | And Configure interfaces in path up | | When Set up memif interfaces on DUT node | ${dut_node} | ${sock_base} | | ... | ${sock_base} | dcr_uuid=${dcr_uuid} diff --git a/tests/vpp/device/container_memif/eth2p-eth-l2xcbase-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-eth-l2xcbase-eth-2memif-1dcr-dev.robot index 1d1fb15722..12896b335e 100644 --- a/tests/vpp/device/container_memif/eth2p-eth-l2xcbase-eth-2memif-1dcr-dev.robot +++ b/tests/vpp/device/container_memif/eth2p-eth-l2xcbase-eth-2memif-1dcr-dev.robot @@ -12,17 +12,16 @@ # limitations under the License. *** Settings *** +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/l2/l2_xconnect.robot | Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/memif.robot | Resource | resources/libraries/robot/shared/testing_path.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | L2XCFWD | BASE | ETH | MEMIF | DOCKER | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | container | ... | Documentation | *L2 cross-connect test cases with memif interface* @@ -41,13 +40,14 @@ | ... | *[Ref] Applicable standard specifications:* RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${nic_name}= | virtual # Memif | ${sock_base}= | memif-DUT1_CNF # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain_functional -# TODO: Add update of VPP PIDs after container creation *** Test Cases *** | tc01-eth2p-ethip4-l2xcbase-eth-2memif-1dcr-device | | [Documentation] @@ -58,9 +58,12 @@ | | ... | i/fs to be switched by DUT to and from docker; verify all packets \ | | ... | are received. [Ref] | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set up functional test with containers +| | And Start containers for device test | | And Configure interfaces in path up | | When Set up memif interfaces on DUT node | ${dut_node} | ${sock_base} | | ... | ${sock_base} | dcr_uuid=${dcr_uuid} @@ -79,9 +82,12 @@ | | ... | be switched by DUT to and from docker; verify all packets are\ | | ... | received. [Ref] | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set up functional test with containers +| | And Start containers for device test | | And Configure interfaces in path up | | When Set up memif interfaces on DUT node | ${dut_node} | ${sock_base} | | ... | ${sock_base} | dcr_uuid=${dcr_uuid} diff --git a/tests/vpp/device/container_memif/eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot index 2db7a79030..a91810bed8 100644 --- a/tests/vpp/device/container_memif/eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot +++ b/tests/vpp/device/container_memif/eth2p-ethip4-ip4base-eth-2memif-1dcr-dev.robot @@ -15,17 +15,16 @@ | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.IPUtil | ... -| Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/memif.robot +| Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/shared/testing_path.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP4FWD | BASE | ETH | MEMIF | DOCKER | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | container | ... | Documentation | *IPv4 routing test cases with memif interface* @@ -45,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${nic_name}= | virtual # IP | ${net1}= | 10.0.1.0 | ${net3}= | 10.0.3.0 @@ -62,7 +63,6 @@ | ${container_engine}= | Docker | ${container_chain_topology}= | chain_functional -# TODO: Add update of VPP PIDs after container creation *** Test Cases *** | tc01-eth2p-ethip4-ip4base-eth-2memif-1dcr-device | | [Documentation] @@ -72,9 +72,12 @@ | | ... | send ICMPv4 Echo Reqest form one TG interface to another one to be \ | | ... | switched by DUT1; verify header of received packet. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set up functional test with containers +| | And Start containers for device test | | And Configure interfaces in path up | | When Set up memif interfaces on DUT node | | ... | ${dut_node} | ${sock_base} | ${sock_base} | dcr_uuid=${dcr_uuid} diff --git a/tests/vpp/device/container_memif/eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot index a6d3c8c8b8..122e83068f 100644 --- a/tests/vpp/device/container_memif/eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot +++ b/tests/vpp/device/container_memif/eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot @@ -16,15 +16,14 @@ | Library | resources.libraries.python.IPUtil | ... | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/memif.robot | Resource | resources/libraries/robot/shared/testing_path.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP6FWD | BASE | ETH | MEMIF | DOCKER | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | container | ... | Documentation | *IPv4 routing test cases with memif interface* @@ -44,6 +43,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${nic_name}= | virtual # IP | ${net1}= | 2001:1::0 | ${net3}= | 2001:3::0 @@ -61,7 +62,6 @@ | ${container_engine}= | Docker | ${container_chain_topology}= | chain_functional -# TODO: Add update of VPP PIDs after container creation *** Test Cases *** | tc01-eth2p-ethip6-ip6base-eth-2memif-1dcr-device | | [Documentation] @@ -71,9 +71,12 @@ | | ... | send ICMPv6 Echo Reqest form one TG interface to another one to be \ | | ... | switched by DUT1; verify header of received packet. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set up functional test with containers +| | And Start containers for device test | | And Configure interfaces in path up | | When Set up memif interfaces on DUT node | | ... | ${dut_node} | ${sock_base} | ${sock_base} | dcr_uuid=${dcr_uuid} diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot index 8eec787f84..b85bd70f96 100644 --- a/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot +++ b/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot @@ -12,13 +12,13 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP4FWD | IPSEC | IPSEC_TNL | IP4BASE | ... -| Test Setup | Set up IPSec SW device functional test | IPv4 -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | ... | Documentation | *IPv4 IPsec tunnel mode test suite.* @@ -33,6 +33,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${nic_name}= | virtual | ${tg_spi}= | ${1000} | ${dut_spi}= | ${1001} | ${ESP_PROTO}= | ${50} @@ -50,30 +53,14 @@ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv4 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| tc02-eth2p-ethip4ipsectnl-ip4base-device-aes-256-cbc-sha-256-128 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} @@ -83,37 +70,21 @@ | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} -| tc03-eth2p-ethip4ipsectnl-ip4base-device-aes-128-cbc-sha-512-256 +| tc02-eth2p-ethip4ipsectnl-ip4base-device-aes-128-cbc-sha-512-256 | | [Documentation] | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv4 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| tc04-eth2p-ethip4ipsectnl-ip4base-device-aes-256-cbc-sha-512-256 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot index 9b545933ed..f37630a0ce 100644 --- a/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot +++ b/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot @@ -12,13 +12,13 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP4FWD | IPSEC | IPSEC_TPT | IP4BASE | ... -| Test Setup | Set up IPSec SW device functional test | IPv4 -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | ... | Documentation | *IPv4 IPsec transport mode test suite.* @@ -33,6 +33,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${nic_name}= | virtual | ${tg_spi}= | ${1000} | ${dut_spi}= | ${1001} | ${ESP_PROTO}= | ${50} @@ -50,28 +53,14 @@ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv4 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| tc02-eth2p-ethip4ipsectpt-ip4base-device-aes-256-cbc-sha-256-128 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet @@ -79,35 +68,21 @@ | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| tc03-eth2p-ethip4ipsectpt-ip4base-device-aes-128-cbc-sha-512-256 +| tc02-eth2p-ethip4ipsectpt-ip4base-device-aes-128-cbc-sha-512-256 | | [Documentation] | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv4 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| tc04-eth2p-ethip4ipsectpt-ip4base-device-aes-256-cbc-sha-512-256 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} | | Then Send IPsec Packet and verify ESP encapsulation in received packet diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot index b0fd6c3823..5524b4fccc 100644 --- a/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot +++ b/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot @@ -12,13 +12,13 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP6FWD | IPSEC | IPSEC_TNL | IP6BASE | ... -| Test Setup | Set up IPSec SW device functional test | IPv6 -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | ... | Documentation | *IPv6 IPsec tunnel mode test suite.* @@ -33,6 +33,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${nic_name}= | virtual | ${tg_spi}= | ${1000} | ${dut_spi}= | ${1001} | ${ESP_PROTO}= | ${50} @@ -51,30 +54,14 @@ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv6 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| tc02-eth2p-ethip6ipsectnl-ip6base-device-aes-256-cbc-sha-256-128 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} @@ -84,37 +71,21 @@ | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} | | ... | ${dut_tun_ip} -| tc03-eth2p-ethip6ipsectnl-ip6base-device-aes-128-cbc-sha-512-256 +| tc02-eth2p-ethip6ipsectnl-ip6base-device-aes-128-cbc-sha-512-256 | | [Documentation] | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv6 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| tc04-eth2p-ethip6ipsectnl-ip6base-device-aes-256-cbc-sha-512-256 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} | | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot index e65b89122d..a4623eda0d 100644 --- a/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot +++ b/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot @@ -12,13 +12,13 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP6FWD | IPSEC | IPSEC_TPT | IP6BASE | ... -| Test Setup | Set up IPSec SW device functional test | IPv6 -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | ... | Documentation | *IPv6 IPsec transport mode test suite.* @@ -33,6 +33,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${nic_name}= | virtual | ${tg_spi}= | ${1000} | ${dut_spi}= | ${1001} | ${ESP_PROTO}= | ${50} @@ -51,29 +54,14 @@ | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv6 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| tc02-eth2p-ethip6ipsectpt-ip6base-device-aes-256-cbc-sha-256-128 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} | | ... | is_ipv6=${TRUE} @@ -82,36 +70,21 @@ | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} | | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| tc03-eth2p-ethip6ipsectpt-ip6base-device-aes-128-cbc-sha-512-256 +| tc02-eth2p-ethip6ipsectpt-ip6base-device-aes-128-cbc-sha-512-256 | | [Documentation] | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport | | ... | mode. | | ... | [Ver] Send and receive ESP packet between TG and VPP node. | | ... +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure topology for IPv6 IPsec testing | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| tc04-eth2p-ethip6ipsectpt-ip6base-device-aes-256-cbc-sha-512-256 -| | [Documentation] -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure manual keyed connection for IPSec | | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} | | ... | is_ipv6=${TRUE} diff --git a/tests/vpp/device/interfaces/eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot b/tests/vpp/device/interfaces/eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot index 0cd3dc82ec..6cf2b324d4 100644 --- a/tests/vpp/device/interfaces/eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot +++ b/tests/vpp/device/interfaces/eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot @@ -27,9 +27,8 @@ | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | L2BD | BASE | ETH | TAP | ... -| Test Setup | Run Keywords | Set up VPP device test -| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | namespace | Test Teardown | Tear down test | packet_trace | namespace | linux_bridge | ... | Documentation | *Tap Interface Traffic Tests* @@ -47,10 +46,11 @@ | ... | *[Ref] Applicable standard specifications:* *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${bid_from_TG}= | 19 | ${bid_to_TG}= | 20 | ${bid_TAP}= | tapBr - | ${tap_int1}= | tap0 | ${tap_int2}= | tap1 @@ -63,7 +63,10 @@ | | ... | [Ver] Packet sent from TG is passed through all L2BD and received\ | | ... | back on TG. Then src_ip, dst_ip and MAC are checked. | | ... -| | Given Configure path in 2-node circular topology | ${nodes['TG']} +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | ${nodes['TG']} | | ... | ${nodes['DUT1']} | ${nodes['TG']} | | And Set interfaces in 2-node circular topology up | | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} diff --git a/tests/vpp/device/interfaces/eth2p-ethip4-ip4base-eth-1tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethip4-ip4base-eth-1tap-dev.robot index 24d0cdd44a..7568f03765 100644 --- a/tests/vpp/device/interfaces/eth2p-ethip4-ip4base-eth-1tap-dev.robot +++ b/tests/vpp/device/interfaces/eth2p-ethip4-ip4base-eth-1tap-dev.robot @@ -17,10 +17,10 @@ | Library | resources.libraries.python.Tap | Library | resources.libraries.python.Trace | ... +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/ip/ip6.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/shared/interfaces.robot | Resource | resources/libraries/robot/shared/testing_path.robot | Resource | resources/libraries/robot/shared/traffic.robot @@ -28,9 +28,8 @@ | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP4FWD | BASE | ETH | IP4BASE | TAP | ... -| Test Setup | Run Keywords | Set up VPP device test -| ... | AND | Clean Up Namespaces | ${nodes['DUT1']} -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | namespace | Test Teardown | Tear down test | packet_trace | namespace | ... | Documentation | *Tap Interface Traffic Tests* @@ -48,13 +47,13 @@ | ... | *[Ref] Applicable standard specifications:* *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${tap1_VPP_ip}= | 16.0.10.1 | ${tap1_NM_ip}= | 16.0.10.2 | ${tap1_NM_mac}= | 02:00:00:00:00:02 | ${tap_int1}= | tap0 - | ${namespace1}= | nmspace1 - | ${dut_ip_address}= | 192.168.0.1 | ${tg_ip_address}= | 192.168.0.2 | ${tg_ip_address_GW}= | 192.168.0.0 @@ -68,7 +67,10 @@ | | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\ | | ... | received on TG. | | ... -| | Given Configure path in 2-node circular topology | ${nodes['TG']} +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | ${nodes['TG']} | | ... | ${nodes['DUT1']} | ${nodes['TG']} | | And Set interfaces in 2-node circular topology up | | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} | @@ -98,7 +100,10 @@ | | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\ | | ... | received on TG. | | ... -| | Given Configure path in 2-node circular topology | ${nodes['TG']} +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | ${nodes['TG']} | | ... | ${nodes['DUT1']} | ${nodes['TG']} | | And Set interfaces in 2-node circular topology up | | ${int1}= | And Add Tap Interface | ${dut_node} | ${tap_int1} | diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot index 34429c61ff..dad29ff647 100644 --- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot +++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot @@ -12,16 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/shared/interfaces.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP4FWD | BASE | ETH | IP4BASE | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | ... | Documentation | *IPv4 routing test cases* @@ -38,6 +38,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${tg_to_dut_if1_ip4}= | 10.10.10.2 | ${tg_to_dut_if2_ip4}= | 20.20.20.2 | ${dut_to_tg_if1_ip4}= | 10.10.10.1 @@ -54,7 +56,10 @@ | | ... | | ${hops}= | Set Variable | ${0} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} @@ -72,7 +77,10 @@ | | ... | | ${hops}= | Set Variable | ${0} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} @@ -90,7 +98,10 @@ | | ... | | ${hops}= | Set Variable | ${1} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} @@ -108,7 +119,10 @@ | | ... | | ${hops}= | Set Variable | ${1} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} | | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot index 1145ff9461..66a3a0f6da 100644 --- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot +++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot @@ -12,16 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/ip/ip6.robot | Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/ip/ip6.robot | Resource | resources/libraries/robot/shared/interfaces.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP6FWD | BASE | ETH | IP6BASE | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | ... | Documentation | *IPv6 routing test cases* @@ -38,6 +38,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${tg_to_dut_if1_ip6}= | 2001:1::2 | ${tg_to_dut_if2_ip6}= | 2001:2::2 | ${dut_to_tg_if1_ip6}= | 2001:1::1 @@ -54,12 +56,15 @@ | | ... | | ${hops}= | Set Variable | ${0} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv6 forwarding in circular topology | ${tg_to_dut_if1_ip6} | | ... | ${tg_to_dut_if2_ip6} | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if2_ip6} | | And Suppress ICMPv6 router advertisement message | ${nodes} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send IPv6 echo request packet and verify headers | ${tg_node} | | ... | ${tg_to_dut_if1} | ${dut_node} | ${dut_to_tg_if1} | | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if1_mac} @@ -73,12 +78,15 @@ | | ... | | ${hops}= | Set Variable | ${0} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv6 forwarding in circular topology | ${tg_to_dut_if1_ip6} | | ... | ${tg_to_dut_if2_ip6} | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if2_ip6} | | And Suppress ICMPv6 router advertisement message | ${nodes} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send IPv6 echo request packet and verify headers | ${tg_node} | | ... | ${tg_to_dut_if1} | ${dut_node} | ${dut_to_tg_if2} | | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if2_ip6} | ${dut_to_tg_if1_mac} @@ -92,12 +100,15 @@ | | ... | | ${hops}= | Set Variable | ${1} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv6 forwarding in circular topology | ${tg_to_dut_if1_ip6} | | ... | ${tg_to_dut_if2_ip6} | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if2_ip6} | | And Suppress ICMPv6 router advertisement message | ${nodes} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send IPv6 echo request packet and verify headers | ${tg_node} | | ... | ${tg_to_dut_if1} | ${tg_node} | ${tg_to_dut_if2} | | ... | ${tg_to_dut_if1_ip6} | ${tg_to_dut_if2_ip6} | ${dut_to_tg_if1_mac} @@ -111,7 +122,10 @@ | | ... | | ${hops}= | Set Variable | ${1} | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure IPv6 forwarding in circular topology | ${tg_to_dut_if1_ip6} | | ... | ${tg_to_dut_if2_ip6} | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if2_ip6} @@ -119,7 +133,7 @@ | | ... | remote_host2_ip6=${remote_host2_ip6} | | ... | remote_host_ip6_prefix=${remote_host_ip6_prefix} | | And Suppress ICMPv6 router advertisement message | ${nodes} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send IPv6 echo request packet and verify headers | ${tg_node} | | ... | ${tg_to_dut_if1} | ${tg_node} | ${tg_to_dut_if2} | | ... | ${remote_host1_ip6} | ${remote_host2_ip6} | ${dut_to_tg_if1_mac} diff --git a/tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot b/tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot index 616f8c6503..47aae65d10 100644 --- a/tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot +++ b/tests/vpp/device/l2bd/eth2p-eth-l2bdbasemaclrn-dev.robot @@ -13,17 +13,17 @@ *** Settings *** | Library | resources.libraries.python.L2Util +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot | Resource | resources/libraries/robot/l2/l2_traffic.robot -| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/shared/interfaces.robot | Resource | resources/libraries/robot/shared/testing_path.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | L2BDMACLRN | BASE | ETH | ICMP | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | ... | Documentation | *L2 bridge-domain test cases* @@ -42,6 +42,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${bd_id}= | 1 *** Test Cases *** @@ -54,7 +56,10 @@ | | ... | its interfaces to be switched by DUT1; verify all packets are \ | | ... | received. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up | | And Create bridge domain | ${dut_node} | ${bd_id} @@ -62,7 +67,7 @@ | | ... | ${bd_id} | | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} | | ... | ${bd_id} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} | | ... @@ -78,7 +83,10 @@ | | ... | its interfaces to be switched by DUT1; verify all packets are \ | | ... | received. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up | | And Create bridge domain | ${dut_node} | ${bd_id} @@ -86,7 +94,7 @@ | | ... | ${bd_id} | | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} | | ... | ${bd_id} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send ICMPv6 bidirectionally and verify received packets | | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} | | VPP get bridge domain data | ${nodes['DUT1']} | bd_id=${bd_id} diff --git a/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot b/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot index ff1ef411fa..7053f7ae74 100644 --- a/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot +++ b/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot @@ -20,8 +20,8 @@ | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | L2XCFWD | BASE | ETH | ICMP | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | ... | Documentation | *L2 cross-connect test cases* @@ -39,6 +39,10 @@ | ... | dst-addr and MAC addresses. | ... | *[Ref] Applicable standard specifications:* RFC792 +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual + *** Test Cases *** | tc01-eth2p-ethicmpv4-l2xcbase-device | | [Documentation] @@ -49,11 +53,14 @@ | | ... | its interfaces to be switched by DUT1; verify all packets are \ | | ... | received. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up | | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send ICMPv4 bidirectionally and verify received packets | | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} @@ -66,10 +73,13 @@ | | ... | its interfaces to be switched by DUT1; verify all packets are \ | | ... | received. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up | | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | When All Vpp Interfaces Ready Wait | ${nodes} +| | And All Vpp Interfaces Ready Wait | ${nodes} | | Then Send ICMPv6 bidirectionally and verify received packets | | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot index 9c9bd39de5..a1a19473b4 100644 --- a/tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot +++ b/tests/vpp/device/vm_vhost/ip4/eth2p-ethip4-ip4base-eth-2vhost-1vm-dev.robot @@ -20,9 +20,9 @@ | Library | resources.libraries.python.VhostUser | Library | resources.libraries.python.VPPUtil | ... +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/ip4.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/shared/interfaces.robot | Resource | resources/libraries/robot/shared/testing_path.robot | Resource | resources/libraries/robot/shared/traffic.robot @@ -30,8 +30,8 @@ | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP4FWD | BASE | ETH | VHOST | 1VM | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | vhost | ... | Documentation | *IPv4 routing test cases with vhost user interface* @@ -50,6 +50,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${net1}= | 10.0.1.0 | ${net3}= | 10.0.3.0 | ${net1_ip1}= | 10.0.1.1 @@ -71,7 +73,10 @@ | | ... | the same network. There is created linux bridge on VM to pass packet \ | | ... | from one vhost-user interface to another one. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up | | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut_node} | ${sock1} @@ -98,7 +103,7 @@ | | VPP Add IP Neighbor | ${dut_node} | ${vhost1} | ${net2_ip2} | ${vhost2_mac} | | VPP Add IP Neighbor | | ... | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip2} | ${tg_to_dut_if2_mac} -| | When Configure VM for vhost L2BD forwarding +| | And Configure VM for vhost L2BD forwarding | | ... | ${dut_node} | ${sock1} | ${sock2} | | Then Send packet and verify headers | | ... | ${tg_node} | ${net1_ip2} | ${net3_ip2} diff --git a/tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot index 3f71f831c4..f125bba035 100644 --- a/tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot +++ b/tests/vpp/device/vm_vhost/ip6/eth2p-ethip6-ip6base-eth-2vhost-1vm-dev.robot @@ -20,9 +20,9 @@ | Library | resources.libraries.python.VhostUser | Library | resources.libraries.python.VPPUtil | ... +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/ip6.robot | Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/shared/interfaces.robot | Resource | resources/libraries/robot/shared/testing_path.robot | Resource | resources/libraries/robot/shared/traffic.robot @@ -30,8 +30,8 @@ | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | IP6FWD | BASE | ETH | VHOST | 1VM | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | vhost | ... | Documentation | *IPv4 routing test cases with vhost user interface* @@ -50,6 +50,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${net1}= | 2001:1::0 | ${net3}= | 2001:3::0 | ${net1_ip1}= | 2001:1::1 @@ -71,7 +73,10 @@ | | ... | the same network. There is created linux bridge on VM to pass packet \ | | ... | from one vhost-user interface to another one. | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up | | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut_node} | ${sock1} @@ -104,7 +109,7 @@ | | ... | ${dut_node} | ${vhost1} | ${net2_ip2} | ${vhost2_mac} | | VPP Add IP Neighbor | | ... | ${dut_node} | ${dut_to_tg_if2} | ${net3_ip2} | ${tg_to_dut_if2_mac} -| | When Configure VM for vhost L2BD forwarding +| | And Configure VM for vhost L2BD forwarding | | ... | ${dut_node} | ${sock1} | ${sock2} | | Then Send packet and verify headers | | ... | ${tg_node} | ${net1_ip2} | ${net3_ip2} diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot index 30ad621eba..2a821a72c7 100644 --- a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot +++ b/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot @@ -20,8 +20,8 @@ | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | L2BDMACLRN | BASE | ETH | VHOST | 1VM | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | vhost | ... | Documentation | *L2 bridge-domain test cases with vhost user interface* @@ -41,9 +41,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${bd_id1}= | 1 | ${bd_id2}= | 2 - | ${sock1}= | /tmp/sock1 | ${sock2}= | /tmp/sock2 @@ -57,10 +58,13 @@ | | ... | switched thru DUT1 and VM in both directions and are correct on \ | | ... | receive. [Ref] | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} +| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} | | ... | ${sock1} | | ... | ${sock2} | | And Create bridge domain | ${dut_node} | ${bd_id1} @@ -87,10 +91,13 @@ | | ... | switched thru DUT1 and VM in both directions and are correct on \ | | ... | receive. [Ref] | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} +| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} | | ... | ${sock1} | | ... | ${sock2} | | And Create bridge domain | ${dut_node} | ${bd_id1} diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot index b610a6cb29..a820bd2cbb 100644 --- a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot +++ b/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot @@ -24,8 +24,8 @@ | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | ... | FUNCTEST | L2XCFWD | BASE | ETH | VHOST | 1VM | ... -| Test Setup | Set up VPP device test -| ... +| Suite Setup | Setup suite single link +| Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | vhost | ... | Documentation | *L2 cross-connect test cases with vhost user interface* @@ -45,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC792 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual | ${sock1}= | /tmp/sock1 | ${sock2}= | /tmp/sock2 @@ -58,10 +60,13 @@ | | ... | i/fs to be switched by DUT to and from VM; verify all packets \ | | ... | are received. [Ref] | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} +| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} | | ... | ${sock1} | ${sock2} | | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1} | | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2} @@ -80,10 +85,13 @@ | | ... | be switched by DUT to and from VM; verify all packets are \ | | ... | received. [Ref] | | ... -| | Given Configure path in 2-node circular topology +| | Given Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP Enable Traces On All Duts | ${nodes} +| | When Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Configure interfaces in path up -| | When Configure vhost interfaces for L2BD forwarding | ${dut_node} +| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} | | ... | ${sock1} | ${sock2} | | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1} | | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2} diff --git a/tests/vpp/perf/__init__.robot b/tests/vpp/perf/__init__.robot index 1f65414306..578c57312b 100644 --- a/tests/vpp/perf/__init__.robot +++ b/tests/vpp/perf/__init__.robot @@ -39,11 +39,8 @@ | | ... | _NOTE:_ This KW sets following suite variables: | | ... | - pkt_trace - Switch to enable packet trace for test. | | ... | - dut_stats - Switch to enable DUT statistics. -| | ... | - plugins_to_enable - List of plugins to be enabled for test. | | ... | - packages_dir - Directory with VPP binary packages. | | ... | | Set Global Variable | ${pkt_trace} | ${False} | | Set Global Variable | ${dut_stats} | ${True} -| | @{plugins_to_enable}= | Create List | dpdk_plugin.so -| | Set Global Variable | @{plugins_to_enable} | | Set Global Variable | ${packages_dir} | /tmp/openvpp-testing/download_dir/ diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index 8125605bc1..3a4acedbaa 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -55,7 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${4} | ${subid}= | 10 | ${tag_rewrite}= | pop-1 @@ -86,10 +84,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | When Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology +| | When Start containers for performance test +| | And Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology | | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot index bb6e551a70..43b7252842 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | LXC | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -51,7 +47,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 @@ -78,9 +76,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize L2 Bridge Domain with memif pairs | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot index 6ff0a962d4..0b1e59e4fb 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | SINGLE_MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -54,7 +50,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 @@ -81,9 +79,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add single PCI device to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize L2 xconnect for single memif | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index 86e7d9aebe..8f29a3c31f 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -51,7 +47,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 @@ -78,9 +76,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot index 49c5313cde..0ccda870b6 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | LXC | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -50,7 +46,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 @@ -77,9 +75,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot index 1c4a2a2b50..6e35a4e680 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -51,7 +47,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 @@ -78,9 +76,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize IPv4 routing with memif pairs | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index a2948f6673..97e4383834 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -55,7 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${4} | ${subid}= | 10 | ${tag_rewrite}= | pop-1 @@ -86,10 +84,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers -| | When Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology +| | When Start containers for performance test +| | And Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology | | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index cfcabc7ebd..9f896abf1c 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -51,7 +47,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 @@ -78,9 +76,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize L2 Bridge Domain with memif pairs | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index b3c16b0022..1f1e42395e 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -51,7 +47,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 @@ -78,9 +76,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize L2 xconnect with memif pairs | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot index a0f2ac6bb4..af9ea41da8 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | MEMIF | DOCKER | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -51,7 +47,9 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | ${nic_name}= | Intel-X710 +| ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254 @@ -78,9 +76,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | When Start containers for performance test | | And Initialize IPv4 routing with memif pairs | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 9dd4fd0fc1..bf7124f353 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index cbac46185b..afadb6123e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 6e5069aa00..4efd988837 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index a3a2b8c627..8977cfe104 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 74fa143cd5..be9cf141af 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,10 +93,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 8e9a3b6774..8adbe233a3 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,10 +93,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot index 4deb357c98..09e9c6d1d8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -93,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot index e57b5e601e..33c40166b5 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -93,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot index 029428b551..3dc1b9e7b3 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -53,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,10 +94,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot index f6e0510ca2..9e68f0d624 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -53,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,10 +94,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot index e13a1dcf72..37720ed9fa 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 | ... | AES_128_GCM | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -53,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot index 5e4201d274..86b9e8bfac 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 | ... | AES_256_GCM | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -53,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index e57d072235..bbd0be9015 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index ded1eaff4a..fb52436609 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index db5bde5c60..3541bf69ac 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index aad42b8fa7..139bf8fa34 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot index efaecb7e96..0d6db9f264 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot index c8ce30fa9e..f9b4b3f1cb 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot index 5b24b71993..e26b7f1c80 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index 36f7e72b31..46350d4e76 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index c99ceb9ecb..15e74ba112 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 09a27f4238..22793da0b6 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index c1b7146733..da2329e73b 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 30b7d76b30..450011925f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 0a75cb54d7..e8d48a0ac0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,10 +93,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 3ef24092f0..3dd7a0eaf6 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,10 +93,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot index bf20f422c7..8923f735ad 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -93,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot index c901a23d35..2feddd10a7 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -93,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot index 010326bc79..2c4a7db8c7 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE | | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -52,6 +50,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -91,10 +93,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot index becd08e918..543c904a93 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE | | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -52,6 +50,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -91,10 +93,10 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot index daab33fb3c..b1ca4d9396 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE | ... | AES_128_GCM | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -53,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot index 124f19a32d..39a8ef5f0e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE | ... | AES_256_GCM | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | ipsechw | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -53,6 +51,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -92,12 +94,12 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} | | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 67231351d3..d1f9cc2839 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 0faaec4f6c..9182026227 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 5f949177d8..850ee9197d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index adf3d9b536..14c01407d4 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot index 0cf9f1b798..fa06d54b7e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot index 5bc274e934..61cd94c22f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot index f0f0fcc869..8d65c893bf 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index ef9f021a31..b1376269da 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -97,7 +97,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 3e7101673d..4f36ee37cd 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 4cc9b480ea..8f91ea1586 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 330483a3ac..a5c29db6b0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 11bdaf2787..8c96b363d8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 1df2e6fbcb..c9128a331a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 777059474c..5a3bfc7a59 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index ad1364ecba..53eba98de1 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index e998af634f..8daedbe4a8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot index 05a229b09b..7d28ab3467 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index a3c88cc4d8..98eb0d8be2 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 539a048e75..f6cbbb5e2e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_128_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index fbe0949c22..ea34878e43 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | ... | AES_256_GCM | AES | ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | SW_cryptodev -| ... | AND | Set up performance test suite with crypto ipsecmb +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -54,6 +51,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 @@ -94,7 +94,7 @@ | | And Add PCI devices to all DUTs | | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology +| | When Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot index 9cca8dd126..f158658da1 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot @@ -12,7 +12,7 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/crypto/ipsec.robot | Resource | resources/libraries/robot/overlay/lispgpe.robot | ... @@ -21,11 +21,9 @@ | ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY | ... | NIC_Intel-X710 | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | ... -| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} -| ... | HW_DH895xcc +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -57,6 +55,10 @@ | ... | RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${osi_layer}= | L3 +| ${crypto_type}= HW_DH895xcc | ${nic_name}= | Intel-X710 | ${overhead}= | ${58} | ${dut2_spi}= | ${1000} @@ -89,7 +91,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Apply startup configuration on all VPP DUTs | | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot index 770bc1199b..ba7f7e19b2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-eth-ip4base-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_AVF | ... -| Suite Setup | Run Keywords -| ... | Set up SRIOV 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} | AVF -| ... | AND | Set up performance test suite with AVF driver +| Suite Setup | Setup suite single link | performance_avf | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local template @@ -49,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -73,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add DPDK no PCI to all DUTs -| | Set Max Rate And Jumbo +| | And Set Max Rate And Jumbo | | And Apply startup configuration on all VPP DUTs | | When Initialize AVF interfaces | | When Initialize IPv4 forwarding in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot index 047265511f..8373afbca0 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -79,7 +79,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot index 3df2710882..d3c4ebe23b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Library | resources.libraries.python.Cop | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | COPWHLIST | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in circular topology | | And Add Fib Table | ${dut1} | 1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot index 9c0be701d7..a4a3fcaa4b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | IACLDST | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -73,7 +73,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot index 0d7e90b6e1..06d53762ea 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Library | resources.libraries.python.Policer | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${cir}= | ${100} @@ -78,7 +78,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in circular topology | | And Initialize IPv4 policer 2r3c-'ca' in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot index fb4a7b4c6d..2d535372c1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot index e9c38b92eb..983148decf 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200K | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} @@ -73,7 +73,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot index 5d5e43aa52..72f9a88b3f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20K | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} @@ -73,7 +73,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot index 100f6aecf5..93763885e1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} @@ -73,7 +73,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot index e6e05e8183..71419b5df9 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot index a1a8ea182d..3fa03d1c30 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot index e273aecfb2..61673c6dcf 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot index 4b5f14b065..261d1718c6 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot index 0e9f24ea43..0869a58cc8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot index e5f28d21ff..d52f9d8c00 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot index 3531592fe7..642c802661 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot index f1f4095464..fc201e761c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index 76163dac5e..cecf7338ac 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot index 402290d6f6..049b649d03 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot index 4a813259b1..ae2cb58b77 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index 510d06d0e9..c8fdba2eb8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot index dea93d15f0..78d7679aaa 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot index 7245b54dd5..43cf6b4a29 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index 3264aff08a..cf8a757ec7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot index ca8d17739c..b1be819909 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot index 29cd2330ba..3fed11a167 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index 06d8455ceb..2b457766d6 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot index 3c7a7f259b..6385bcd08d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot @@ -12,21 +12,17 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | nat | ... | Test Template | Local Template | ... @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -76,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot index c31d0f34dc..6e43a21612 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot index 05cccd0a3c..7a902bc9d2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot index 8a169dcfd6..56bad45cd2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot index a39e028dd8..1b11aeb52a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot index 423183c686..c971f7f362 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot index 10fc55d3cf..e4418146d8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot index bcb2307146..5f23e46b96 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot index c42b93bb1f..1f41774a60 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot index 7f7221054f..3c1287e9b5 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot index 6f3be8a12e..24087530ca 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot index 54dd79a38f..b9d5ed18eb 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot index e2ecdf4998..a3aa66e59e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot index 7da80ee6da..c1a61b7488 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot index 5c0c57d993..fa2e15f8aa 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot index 9ed6e3d45f..809fb624eb 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot index 4415146918..18f4b1e5e7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot index d8a3e1afd3..72f61ffac7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 100 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot index ac9aa80d80..5eecf988a8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot index 5fd4446939..286fe22a21 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdr.robot @@ -12,22 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... -| # TODO: Even with single user this is a scale test, as it uses 15 ports. -| # Update tags to better distinguish from base tests. | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | SRC_USER_1 | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | nat | ... | Test Template | Local Template @@ -54,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -78,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot index f4b8b0fa5a..191cb78057 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdr.robot @@ -12,7 +12,7 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... @@ -20,13 +20,9 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_10 | ... | SCALE | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | nat | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -77,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot index 8884d987ef..ee1a9d94e4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot @@ -12,7 +12,7 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... @@ -20,13 +20,9 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_100 | ... | SCALE | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | nat | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -77,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot index a32faceab5..16165ff33a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot @@ -12,7 +12,7 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... @@ -20,14 +20,10 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_1000 | ... | SCALE | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | nat | ... | Test Template | Local Template | ... @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -77,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot index 7f9b5947d7..2b99cf1dd3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdr.robot @@ -12,7 +12,7 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... @@ -20,13 +20,9 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_2000 | ... | SCALE | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | nat | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -77,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot index deec73bc10..72302bf082 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdr.robot @@ -12,7 +12,7 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... @@ -20,13 +20,9 @@ | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_4000 | ... | SCALE | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | nat | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -77,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot index af7e7e904e..954e36dcdc 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -12,17 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} -| ... +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -79,7 +78,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot index 7ab9466c67..7cc2eb6315 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Library | resources.libraries.python.Policer | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${cir}= | ${100} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in circular topology | | And Initialize IPv4 policer 2r3c-'ca' in circular topology diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot index b293dd5479..24d857d49d 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4base-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -71,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot index 2c731a1f74..742cff1b65 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale200k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_200k | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot index 4b7bc0b2b8..854764f6f6 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale20k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_20k | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot index c2aa5ad559..c30789bb4a 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4-ip4scale2m-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot index f41fc5fc52..37d3e5f5f2 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -50,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot index f5bf746d08..56dd8f985f 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -50,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot index c2ef6423e7..d7f28986ed 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -50,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot index 9eadef6b6f..ef1cac7fd0 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -50,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -88,7 +86,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | ${ip_nr}= | Set Variable | 10 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot index 88d0848018..59de2237a0 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-nat44-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/ip/nat.robot | Resource | resources/libraries/robot/shared/traffic.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | BASE | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with NAT +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -51,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -76,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add NAT to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize NAT44 in circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot index c975bfe279..ac91f41193 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_100 | DOT1Q | VLAN_100 | ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_100 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Traffic profile: @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology | | ... | vxlan_count=${vxlan_count} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot index 30305a3fba..d70428b488 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_10 | DOT1Q | VLAN_10 | ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_10 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Traffic profile: @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology | | ... | vxlan_count=${vxlan_count} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot index bb63138137..d195ccd566 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_1K | DOT1Q | VLAN_1K | ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1K | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Traffic profile: @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology | | ... | vxlan_count=${vxlan_count} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot index d265e6b677..a52533df6f 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | SCALE | L2BD_1 | DOT1Q | VLAN_1 | ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Traffic profile: @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology | | ... | vxlan_count=${vxlan_count} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot index d5067061de..4fd4e9aea0 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${8} # Traffic profile: @@ -75,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot index 427018a5c5..ba56397992 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | IP4FWD | ENCAP | LISP | IP6UNRLAY | IP4OVRLAY | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${48} # Traffic profile: @@ -75,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot index 03301cf601..0b3d0a7544 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Traffic profile: @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot index bc24674711..4e90a376ff 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2XCFWD | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} # Traffic profile: @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot index ccec825157..9a00716688 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -79,7 +79,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot index c18607f9ce..6d2ca5d587 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Library | resources.libraries.python.Cop | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot index 0146503e4e..aebc5b02e3 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology | | And Initialize IPv6 iAcl whitelist in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot index 4f8da1071e..11a588485b 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -71,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot index adc3b1036b..4cde20ce37 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200K | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} @@ -73,7 +73,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot index ed6b0eba2f..96de50b879 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20K | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} @@ -73,7 +73,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot index 1ca96ebfdb..db3ae9b445 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} @@ -73,7 +73,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot index 51f7496b28..82954843e2 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-dot1q-ip6base-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -78,7 +78,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology | | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot index a52ad238dd..ece6779964 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6base-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,7 +44,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -| ${nic_name}= | Intel-X710 +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 + ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: | ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253 @@ -70,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 2-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot index f8b99d8c99..458517baf9 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale200k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_200k | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${100000} @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot index ea17fd68b6..ff3e64e2a9 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale20k-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_20k | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${10000} @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot index 35eb4e7924..304696957a 100644 --- a/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot +++ b/tests/vpp/perf/ip6/2n1l-10ge2p1x710-ethip6-ip6scale2m-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | SCALE | FIB_2M | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -47,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${rts_per_flow}= | ${1000000} @@ -72,7 +72,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding with scaling in circular topology | | ... | ${rts_per_flow} diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot index 5ce751609e..4dd0c8094f 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot @@ -12,18 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -45,6 +43,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # LISP overhead | ${overhead}= | 48 @@ -71,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot index 20955e69aa..dbfedf3172 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot @@ -12,19 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| ... +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +43,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # LISP overhead | ${overhead}= | 8 @@ -72,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology | | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot index 1d87ecdeb8..923c47514d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | DRV_AVF | ... -| Suite Setup | Run Keywords -| ... | Set up SRIOV 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} | AVF -| ... | AND | Set up performance test suite with AVF driver +| Suite Setup | Setup suite single link | performance_avf | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local template @@ -50,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -73,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add DPDK no PCI to all DUTs -| | Set Max Rate And Jumbo +| | And Set Max Rate And Jumbo | | And Apply startup configuration on all VPP DUTs | | When Initialize AVF interfaces | | And Initialize L2 bridge domain in circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot index f5c3210a3a..52c8edf4fb 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2patch-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | DRV_AVF | ... -| Suite Setup | Run Keywords -| ... | Set up SRIOV 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} | AVF -| ... | AND | Set up performance test suite with AVF driver +| Suite Setup | Setup suite single link | performance_avf | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local template @@ -49,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -73,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add DPDK no PCI to all DUTs -| | Set Max Rate And Jumbo +| | And Set Max Rate And Jumbo | | And Apply startup configuration on all VPP DUTs | | When Initialize AVF interfaces | | And Initialize L2 patch diff --git a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot index 8becdc11c9..558694a671 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_AVF | ... -| Suite Setup | Run Keywords -| ... | Set up SRIOV 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} | AVF -| ... | AND | Set up performance test suite with AVF driver +| Suite Setup | Setup suite single link | performance_avf | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local template @@ -49,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -73,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add DPDK no PCI to all DUTs -| | Set Max Rate And Jumbo +| | And Set Max Rate And Jumbo | | And Apply startup configuration on all VPP DUTs | | When Initialize AVF interfaces | | And Initialize L2 Xconnect In 3-node Circular Topology diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot index 19970535c1..29d3114fc1 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/l2/tagging.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1AD | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${8} | ${subid}= | 10 @@ -79,7 +79,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path up | | When Initialize VLAN sub-interfaces in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index 89f72fedb3..505f0798a4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -78,7 +78,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology | | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index e3ad0a4347..a4a9ef9a29 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/l2/tagging.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1Q | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -75,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot index 037e85bdde..9b2a7be440 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot index 9d6347d964..ac5bda4647 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot index 470d960353..2e69a1d475 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot index aaf9a15417..17615ac35c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot index 97bc9965db..c6f6e168df 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot index 8e7a7f9d15..16b746127a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot index 11c5ecd378..9f65c8dbfc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot index fa9af5deb0..0f8245d1e5 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot index 9ab31ea38a..22b3aebe78 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -90,7 +88,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot index 72ed8325a0..18adc9523b 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot index 9710fc007a..68f4acfbcc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot index 70514d6471..20bb92b0d7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -90,7 +88,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot index 44e9a93ce4..8147a4be15 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot index c987aba83b..e5694a4ccf 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index 05be52cd53..2f168d2f0b 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | IACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -90,7 +88,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot index b04df6b0ed..69d3fa0e8d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-10u10p-conc diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot index 4b86f3e4c6..8d5cd241ca 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot index 93eccdb2a7..5075085bcd 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | IACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template | ... @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -90,7 +88,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot index f76c1dd419..6514b6edc1 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -92,7 +90,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot index caa52e1365..59da7f51c3 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -92,7 +90,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot index cce8015a71..e0a5145135 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -92,7 +90,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot index 2e68b77e9c..25e07dc923 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -91,7 +89,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot index 313c3d1e23..79d7dc554a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -91,7 +89,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot index 0f3601c593..f0e3f5d2e9 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -91,7 +89,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot index aa9ccaa398..a762ce3f9a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -91,7 +89,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot index 16081910a8..c3e72dc6fc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -91,7 +89,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot index 9a77d1221e..f9e6db37d1 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS | ... | IACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | macipacl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -91,7 +89,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index 6538cf2ea8..4f5a506e71 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | L2BDBASE | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -70,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot index 95d2506da1..abd857fb59 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot index 6581055498..1fce9554f9 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot index 8d773c347b..4e6402a09c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot index e5e4171c24..86a6eae1cc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL10 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot index c7ad073d8c..26d4af311c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL10 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot index d3b0c62673..f6543c468e 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL10 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot index dc4544f97a..f679e366c8 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot index 524ea58573..3df0df79da 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot index 16843bec3b..bc26a4e5dc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot index ce7adbef64..30fc8c2ad2 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL1 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot index 48f58ce3d1..dbf747efda 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL1 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot index fbf1d930e5..1eb4413d5d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL1 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot index 40f0014adc..8aa07861a0 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot index 475faf66d7..1a7ce08215 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot index 2f4fc064d0..1fd4c42d2c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL | ... | OACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot index dc2c1980c8..1c7e6a9eeb 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL50 | 100_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot index 1012f30649..73e4efa1f0 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL50 | 100K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot index 88eb466ee9..a4bbdc27b4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS | ... | OACL | ACL50 | 10K_FLOWS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | acl | ... | Test Template | Local Template @@ -52,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # ACL test setup @@ -89,7 +87,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index 2b962cf5fe..7aecdf8e5f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_100K | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index b881f75a94..0419d2be56 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_10K | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index 6336036744..8c9d8b182b 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_1M | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot index 02ff85b44d..623bbab2fd 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -70,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot index 7bb18fe6d2..f73664b3a9 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -70,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot index 2a7088569d..a264898435 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2bdbasemaclrn-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | DRV_AVF | ... -| Suite Setup | Run Keywords -| ... | Set up SRIOV 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} | AVF -| ... | AND | Set up performance test suite with AVF driver +| Suite Setup | Setup suite single link | performance_avf | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local template @@ -50,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -73,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add DPDK no PCI to all DUTs -| | Set Max Rate And Jumbo +| | And Set Max Rate And Jumbo | | And Apply startup configuration on all VPP DUTs | | When Initialize AVF interfaces | | And Initialize L2 bridge domain in circular topology diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot index 026c39adf3..165e816cb6 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2patch-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | DRV_AVF | ... -| Suite Setup | Run Keywords -| ... | Set up SRIOV 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} | AVF -| ... | AND | Set up performance test suite with AVF driver +| Suite Setup | Setup suite single link | performance_avf | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local template @@ -49,6 +45,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -73,7 +71,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add DPDK no PCI to all DUTs -| | Set Max Rate And Jumbo +| | And Set Max Rate And Jumbo | | And Apply startup configuration on all VPP DUTs | | When Initialize AVF interfaces | | And Initialize L2 patch diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot index b335cc391d..ac55264e74 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-avf-eth-l2xcbase-ndrpdr.robot @@ -12,18 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_AVF | ... -| Suite Setup | Run Keywords -| ... | Set up SRIOV 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} | AVF -| ... | AND | Set up performance test suite with AVF driver +| Suite Setup | Setup suite single link | performance_avf | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local template @@ -48,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -72,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add DPDK no PCI to all DUTs -| | Set Max Rate And Jumbo +| | And Set Max Rate And Jumbo | | And Apply startup configuration on all VPP DUTs | | When Initialize AVF interfaces | | And Initialize L2 Xconnect In 2-node Circular Topology diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index 804b5155f2..7045b35b42 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | BASE | DOT1Q | L2BDMACLRN | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -48,6 +46,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology | | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 83810afed1..079cd59cb4 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/l2/tagging.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1Q | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 @@ -75,7 +75,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index fc5825f01b..07963479e8 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | L2BDBASE | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -70,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index 7d4427a47c..d40db4a250 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_100k | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index da9d518199..03e4cd3140 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_10k | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index a6e07711ed..338066f4cf 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | SCALE | L2BDSCALE | FIB_1M | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -74,7 +74,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain in circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot index a3c14d1dbf..893b6151b6 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2PATCH | BASE | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -70,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 patch | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot index c6f36c2d5e..aad27f5377 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | L2XCBASE | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | ... | Test Template | Local Template @@ -46,6 +44,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} # Traffic profile: @@ -70,7 +70,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 2-node circular topology | | Then Find NDR and PDR intervals using optimized search diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot index 6e0c830a21..d13e63f944 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 10DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot index 031875ecae..e864bed858 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-20mif-10dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 10DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot index c6e8610939..94a87f593b 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 20DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot index 3cf4a3bf25..d0cdbfe99b 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 6DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot index a8c54c5e38..f84e230ac5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-12mif-6dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 6DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot index 63d12ddf30..c2eef252c8 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot index 72b743bbc1..efa9eeefc2 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot index 6557ed2417..6b5ad5c83c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 10DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot index 5206b9793b..c4c3ea20af 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-20mif-10dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 10DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot index 874774ca77..167787b312 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot index 3faeedcdf8..ee8085f189 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-2mif-1dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot index 7c664f8e6d..9c82719382 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr1t-vppip4-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 2DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down test | performance | container +| Test Setup | Setup test +| Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template | ... @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot index 68df070a40..a7f8344aa2 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-4mif-2dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 2DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot index d9fdfb219a..7cd5ed9860 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 4DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot index 5e7ca55585..24b74e4b13 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-1ch-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 4DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot index 6993ecc006..222d0a94ce 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot index 12ad91f8e3..5a70d8417a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot index 608b52843c..eae8879fb5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 12DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot index 713ce667b6..537db4c646 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-24mif-12dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 12DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot index 4a12911bef..326e04a1e2 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 16DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot index 8f0f02d57e..2127f8ee7c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-32mif-16dcr2t-vppip4-ndrpdr.robot @@ -12,21 +12,18 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 16DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... +| ... | Test Template | Local Template | ... | Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains @@ -53,6 +50,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +81,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot index 2d08829575..20d3b28a0d 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R10C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 20DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot index 7f455b204f..f4a3d9301e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 2DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot index ee0c4f0de9..afaf9d7787 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-4mif-2dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 2DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot index c59f15eef6..d7a3caf4d5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 4DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot index 01c4e549b4..faf91560a1 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 4DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot index 5c892a1d34..02b6b21dfe 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot index af4ea8cb8c..99e61f095b 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot index 5bee75e479..274f5d263c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 16DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot index a1f800055d..4123f88232 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-32mif-16dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 16DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot index dee3b57402..c6abe49244 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R6C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 24DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot index cc23fee17f..f7efcf4b14 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 4DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot index 8704e127ff..8b83c7b2f8 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 4DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot index d5ea7c3d93..a3f8986ea3 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 6DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot index e87c1f7b2e..de436cc7df 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-12mif-6dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 6DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot index dca004f8b4..550828ce58 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 12DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot index c26e767a78..19068a5c9e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-24mif-12dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 12DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot index cb26a5acd2..ac0e96819d 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R4C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 24DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot index fd8bbf4a2f..d948237b63 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot index ba33f01e35..ea2faa0f2e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot index 9cdfca51e8..832a66308a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 16DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot index b6f37a7106..e84708b916 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-8ch-32mif-16dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C | ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 16DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple chains with memif pairs | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot index 2caf3e27ba..18e26a5eb5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 10DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot index 75bfd54616..f8e82f28ac 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-10dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 10DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${10} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot index 186c747f05..aa274d5ef6 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 20DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot index 772bb258f5..33f1b8db44 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 10DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot index cdc380ea90..bacf641333 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-10dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R10C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 10DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${10} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot index 08cf03e7d1..f7d585e1bb 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 1DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot index cbd54a6e4a..1fd08268fb 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-1dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 1DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot index 95573205e2..ea47774f6e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 2DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot index 7c58b82a0f..faea50f2bb 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-2dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 2DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot index c65a8d95ee..6777562592 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 4DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot index b742015164..c5babd8a1a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-4dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R4C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 4DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot index f95f35033d..e5a2caefbe 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 6DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot index 3dcbf0b970..5ba1af1d36 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-6dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R6C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 6DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot index eae7579dfe..f3e044dfd6 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot index b1d9f2061c..1801470591 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-1pl-2mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 1R8C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${1} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot index 7ed1e1d1b0..df6a1da517 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 12DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot index d06621c38f..fcbbcc812b 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-12dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R6C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 12DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot index f8a4e90bfc..149ec461d9 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 16DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot index 0bdafaad0e..3e7212195d 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-16dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R8C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 16DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${8} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot index 6684029234..3421ee140a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R10C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 20DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot index 6c9ec1d4ca..2c45ce676f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 2DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot index 236b90412a..7696419954 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-2dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 2DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot index 78fcc0d997..0ec1632617 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 4DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot index 6c55770909..93fd841204 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-4dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 4DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot index c15cb5b23e..279366a8a9 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot index 176ae6c050..89c9bdf296 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R4C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${2} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot index df2a6d77d3..8bd50d8ab3 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 4DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot index b61854c7dc..6c74c1dc9c 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-8mif-4dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 4DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${4} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot index 8d4c2ce270..4c21ac2f76 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 16DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot index 7caa47c404..9a37899521 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-16dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R4C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 16DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${4} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot index 4c29f46f18..71b9857a5e 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R6C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 24DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot index 9d875c558b..ec1ea38304 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot index faba715ba6..64136c5c3f 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${4} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot index f9da8a72bf..3d0fb64dd9 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 12DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot index 68636a1381..4d9c656deb 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-12dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 12DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${6} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot index e52e844676..18e551bbd5 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R4C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 24DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot index c03d7dbf5d..8fcba0f942 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 6DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot index 0977159b2d..adcd32b6d1 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 6DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot index 774c217109..4a6b15786a 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 16DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot index 2291fecaa6..1be641b3f0 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-16dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R2C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 16DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${8} | nf_nodes=${2} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot index 9df5dbf97c..7e9ec69649 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr1t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR1T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot index 8c0b8efd77..2a999aa368 100644 --- a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-8pl-16mif-8dcr2t-vppip4-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 8R1C | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 8DCR2T | ... -| Suite Setup | Run Keywords -| ... | Set up 2-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | container | ... | Test Template | Local Template @@ -53,6 +49,8 @@ | ... | addresses of the TG node interfaces. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -82,9 +80,9 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs -| | And Set up performance test with containers +| | And Start containers for performance test | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs | | ... | nf_chains=${8} | nf_nodes=${1} | auto_scale=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot index 9ff608e534..2592010126 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 10R1C | 10VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${10} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot index ca67ba58f0..71999d50fd 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-20vh-10vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 10R1C | 10VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${10} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot index adfa4d77bc..c8455ae21c 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-10ch-40vh-20vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 10R2C | 20VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${10} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot index 6666848235..6b3ddb60f9 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R6C | 6VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${6} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot index eb617db740..51d6c325aa 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-12vh-6vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R6C | 6VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${6} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot index 6827892941..e3e2e52b25 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R8C | 8VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${8} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot index 767a47e0bd..61959af001 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R8C | 8VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${8} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot index e5d47c7710..64fc088423 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R10C | 10VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${10} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot index 36cd6ff922..22ce99aa66 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-20vh-10vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R10C | 10VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544 *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${10} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot index 5d29031d74..dcb68a8250 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R1C | 1VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot index 048f151cc4..5bf19b5e5f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-2vh-1vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R1C | 1VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot index 2040813434..9f4d31cd76 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R2C | 2VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot index fc69e493bd..cb5df83ff2 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R2C | 2VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot index 2fc1d83c6b..fc1a6b4b38 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R4C | 4VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot index 012597e90d..e628b22c85 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-1ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R4C | 4VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${1} | nf_nodes=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot index b9a3205665..768ec32dcc 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R4C | 8VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot index 14eec5f949..c174a304bb 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R4C | 8VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot index ac6a5db28d..06df9ae4bf 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R6C | 12VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${6} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot index 095a8e4d7b..0856ae19af 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-24vh-12vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R6C | 12VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${6} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot index 2348d22111..6995151435 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R8C | 16VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${8} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot index dc37db1bcb..854168d503 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R8C | 16VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${8} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot index 49b1af04b0..2d40203fc4 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-40vh-20vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R10C | 20VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${10} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot index 486671b274..7d876d369a 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R1C | 2VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot index cbb7762422..97a242c3f0 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-4vh-2vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R1C | 2VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot index 4baee04510..feda726e1f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R2C | 4VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot index a390d0d1a5..4810dcf153 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-2ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 2R2C | 4VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${2} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot index e448aa1b89..c4e4b27458 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R2C | 8VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${4} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot index 197288c564..5a91e4eb14 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R2C | 8VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${4} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot index 94eadb5e73..36ef75ee3a 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R4C | 16VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${4} | nf_nodes=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot index 481756c1ab..1e25193308 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R4C | 16VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${4} | nf_nodes=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot index 6992469663..107851c206 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-48vh-24vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R6C | 24VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${4} | nf_nodes=${6} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot index 597028af56..ea28e6cc5d 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R1C | 4VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${4} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot index 28bd12e94d..cff6f4557e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-4ch-8vh-4vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R1C | 4VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${4} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot index 5177703a98..9b3bfb4d2e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R1C | 6VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${6} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot index 3a80c9ea21..aa32298fb6 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-12vh-6vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R1C | 6VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${6} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot index ded92e8991..1e0cbd0211 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R2C | 12VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${6} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot index b68a87e93e..e7fae83a22 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-24vh-12vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R2C | 12VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${6} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot index 4ac55071f6..7068d0a473 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-6ch-48vh-24vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 6R4C | 24VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${6} | nf_nodes=${4} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot index b7543868cc..5ef2ee7b08 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R1C | 8VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${8} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot index 6b55e552a0..363f9874c9 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-16vh-8vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R1C | 8VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${8} | nf_nodes=${1} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot index 54b54587cc..bc6d854cee 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm1t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R2C | 16VM1T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${2} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${8} | nf_nodes=${2} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot index d16671ae73..9717614b7f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain/2n-10ge2p1x710-eth-l2bd-8ch-32vh-16vm2t-vppip4-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 8R2C | 16VM2T | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} @@ -77,7 +77,7 @@ | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains for multiple chains with Vhost-User | | ... | nf_chains=${8} | nf_nodes=${2} diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot index 8e36a25b88..ecb52a657c 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_1SID | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | srv6 | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | draft 3. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # outer IPv6 header: 40B | ${overhead}= | ${40} diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot index 0cf678fa65..6ebcd7f66c 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_2SID_DECAP | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | srv6 | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | draft 3. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # outer IPv6 header + SRH with 2 SIDs: 40+40B | ${overhead}= | ${80} diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot index 5843dcb203..29d234fc83 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_2SID_NODECAP | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | srv6 | ... | Test Template | Local Template @@ -51,6 +49,8 @@ | ... | draft 3. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # outer IPv6 header + SRH with 2 SIDs: 40+40B | ${overhead}= | ${80} diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot index 52d7b3e0fb..292a4ae225 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdr.robot @@ -12,20 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY | ... | SRv6_PROXY_DYN | MEMIF | LXC | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance test suite with Dynamic SRv6 proxy +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | srv6 | container | ... | Test Template | Local Template @@ -55,6 +50,8 @@ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6ad_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B | ${overhead}= | ${96} diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot index 237162c21f..1f9660ed86 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot @@ -12,20 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY | ... | SRv6_PROXY_MASQ | MEMIF | LXC | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance test suite with Masquerading SRv6 proxy +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | srv6 | container | ... | Test Template | Local Template @@ -55,6 +50,8 @@ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6am_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B | ${overhead}= | ${96} diff --git a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot index 637eccee1b..1b4dfd4d60 100644 --- a/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot @@ -12,20 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY | ... | SRv6_PROXY_STAT | MEMIF | LXC | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L3 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance test suite with Static SRv6 proxy +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | srv6 | container | ... | Test Template | Local Template @@ -55,6 +50,8 @@ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6as_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 # outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B | ${overhead}= | ${96} diff --git a/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot b/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot index c597b085ab..c995a586af 100644 --- a/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot +++ b/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot @@ -15,15 +15,14 @@ | Library | resources.tools.wrk.wrk | Resource | resources/libraries/robot/wrk/wrk_utils.robot -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/tcp/tcp_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | HTTP | TCP | ... -| Suite Setup | Set up 3-node performance topology with wrk and DUT's NIC model -| ... | Intel-XL710 -| ... -| Test Setup | Set up tcp performance test +| Suite Setup | Setup suite single link | wrk +| Suite Teardown | Tear down suite +| Test Setup | Setup test | Test Teardown | Tear down test | ... | Test Template | Local template @@ -38,6 +37,9 @@ | ... | *[Ver] TG verification:* | ... | *[Ref] Applicable standard specifications:* +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so + *** Keywords *** | Local template | | [Arguments] | ${traffic_profile} | ${phy_cores} | ${test_type} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 765b792993..046e020e84 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM | ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 | ... | LBOND_1L | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with LACP mode link bonding -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -56,6 +52,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index d2b3424fa0..44abc52501 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM | ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 | ... | LBOND_1L | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | ${nic_name} -| ... | AND | Set up performance test suite with LACP mode link bonding -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -56,6 +52,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 5fb6e0825e..0112ec2046 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM | ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 | ... | LBOND_2L | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model with double link between DUTs -| ... | L2 | ${nic_name} -| ... | AND | Set up performance test suite with LACP mode link bonding -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite double link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -57,6 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 162703062c..ecf9ca6d27 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,20 +12,16 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM | ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34 | ... | LBOND_2L | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model with double link between DUTs -| ... | L2 | ${nic_name} -| ... | AND | Set up performance test suite with LACP mode link bonding -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite double link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -57,6 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | lacp_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index bb42889dac..c281c437ef 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM | ... | VHOST_1024 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -53,6 +51,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 1b3aaa24e7..51f7659734 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 97f5715f65..324265e689 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 4672a448a1..ebeba94f1d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot index 9e51895c63..cfd28af21f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 35977e8f19..2e8f42de0a 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 3-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -52,6 +50,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} | ${bd_id1}= | 1 diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 91ba3c2246..f4e01df180 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,17 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM | ... | VHOST_1024 | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -52,6 +50,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${4} | ${subid}= | 10 diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index e545a48356..03e697b468 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -50,6 +48,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot index 1ac2fdf2a3..10e5b6f7a3 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L2 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L2 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot index b85195f0f8..749ad890a3 100644 --- a/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -12,16 +12,14 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | VHOST_1024 | ... -| Suite Setup | Set up 2-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} -| Suite Teardown | Tear down suite -| ... -| Test Setup | Set up performance test +| Suite Setup | Setup suite single link | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -49,6 +47,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${0} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot index 432fc277f6..a2c755e29d 100644 --- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermit-2vhostvr1024-1vm-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -55,6 +51,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot index 40724effd8..bbb237f6c1 100644 --- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-aclpermitreflect-2vhostvr1024-1vm-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | VM | VHOST_1024 | VTS | ACL_PERMIT_REFLECT | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -55,6 +51,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} | ${nf_dtcr}= | ${1} diff --git a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot index ffbf4ab3aa..a0f5c038a5 100644 --- a/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vts/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-noacl-2vhostvr1024-1vm-ndrpdr.robot @@ -12,19 +12,15 @@ # limitations under the License. *** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/shared/default.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | VM | VHOST_1024 | VTS | ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model -| ... | L3 | ${nic_name} -| ... | AND | Set up performance test suite with ACL +| Suite Setup | Setup suite single link | performance | Suite Teardown | Tear down suite | performance -| ... -| Test Setup | Set up performance test +| Test Setup | Setup test | Test Teardown | Tear down test | performance | vhost | ... | Test Template | Local Template @@ -55,6 +51,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${osi_layer}= | L3 | ${nic_name}= | Intel-X710 | ${overhead}= | ${50} | ${nf_dtcr}= | ${1} diff --git a/topologies/available/vpp_device.template b/topologies/available/vpp_device.template index c855a716e7..4659575c80 100644 --- a/topologies/available/vpp_device.template +++ b/topologies/available/vpp_device.template @@ -19,11 +19,13 @@ nodes: mac_address: "${CSIT_TG_INTERFACES_PORT1_MAC}" pci_address: "${CSIT_TG_INTERFACES_PORT1_PCI}" link: link1 + model: virtual driver: "${CSIT_TG_INTERFACES_PORT1_DRV}" port2: mac_address: "${CSIT_TG_INTERFACES_PORT2_MAC}" pci_address: "${CSIT_TG_INTERFACES_PORT2_PCI}" link: link2 + model: virtual driver: "${CSIT_TG_INTERFACES_PORT2_DRV}" DUT1: type: DUT @@ -37,9 +39,11 @@ nodes: mac_address: "${CSIT_DUT1_INTERFACES_PORT1_MAC}" pci_address: "${CSIT_DUT1_INTERFACES_PORT1_PCI}" link: link1 + model: virtual driver: "${CSIT_DUT1_INTERFACES_PORT1_DRV}" port2: mac_address: "${CSIT_DUT1_INTERFACES_PORT2_MAC}" pci_address: "${CSIT_DUT1_INTERFACES_PORT2_PCI}" link: link2 + model: virtual driver: "${CSIT_DUT1_INTERFACES_PORT2_DRV}" -- cgit 1.2.3-korg