From c9e827ea478fd713754103b03f144011b8543425 Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Mon, 18 Sep 2017 13:01:35 +0200 Subject: CSIT-796: l2bd-memif perf tests Change-Id: Ic714fa7baec49dcba1a8eb6a578183c6771e3493 Signed-off-by: Jan Gelety --- .../performance/performance_configuration.robot | 51 ++++- resources/libraries/robot/shared/memif.robot | 6 +- ...l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot | 233 +++++++++++++++++++++ 3 files changed, 285 insertions(+), 5 deletions(-) create mode 100644 tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 8e170c93a9..1196862cc6 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -2020,8 +2020,8 @@ | | Set Interface State | ${dut2} | ${dut2_if1} | up | | Set Interface State | ${dut2} | ${dut2_if2} | up | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/memif-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/memif-${number}-2 +| | | ${sock1}= | Set Variable | /tmp/memif-DUT1_VNF${number}-1 +| | | ${sock2}= | Set Variable | /tmp/memif-DUT1_VNF${number}-2 | | | ${prev_index}= | Evaluate | ${number}-1 | | | Set up memif interfaces on DUT node | ${dut1} | | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 @@ -2030,6 +2030,8 @@ | | | ... | ${dut1-memif-${prev_index}-if2} | | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} | | | ... | ${dut1-memif-${number}-if1} +| | | ${sock1}= | Set Variable | /tmp/memif-DUT2_VNF${number}-1 +| | | ${sock2}= | Set Variable | /tmp/memif-DUT2_VNF${number}-2 | | | Set up memif interfaces on DUT node | ${dut2} | | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 | | | ... | dut2-memif-${number}-if2 @@ -2041,3 +2043,48 @@ | | | ... | ${dut1} | ${dut1-memif-${number}-if2} | ${dut1_if2} | | | Run Keyword If | ${number}==${nr} | Configure L2XC | | | ... | ${dut2} | ${dut2-memif-${number}-if2} | ${dut2_if2} + +| Initialize L2 Bridge Domain for '${nr}' memif pairs in 3-node circular topology +| | [Documentation] +| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each +| | ... | Memif interface to separate L2 bridge domain with one physical or +| | ... | virtual interface to create a chain accross DUT node. +| | ... +| | ... | *Arguments:* +| | ... | _None_ +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-${number}-1 +| | ... | - /tmp/memif-${number}-2 +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular\ +| | ... | topology \| +| | ... +| | ${bd_id2}= | Evaluate | ${nr}+1 +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${1} +| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id2} +| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${1} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} +| | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 +| | | ${sock1}= | Set Variable | /tmp/memif-DUT1_VNF${number}-1 +| | | ${sock2}= | Set Variable | /tmp/memif-DUT1_VNF${number}-2 +| | | Set up memif interfaces on DUT node | ${dut1} +| | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 +| | | ... | dut1-memif-${number}-if2 +| | | ${bd_id2}= | Evaluate | ${number}+1 +| | | Add interface to bridge domain | ${dut1} +| | | ... | ${dut1-memif-${number}-if1} | ${number} +| | | Add interface to bridge domain | ${dut1} +| | | ... | ${dut1-memif-${number}-if2} | ${bd_id2} +| | | ${sock1}= | Set Variable | /tmp/memif-DUT2_VNF${number}-1 +| | | ${sock2}= | Set Variable | /tmp/memif-DUT2_VNF${number}-2 +| | | Set up memif interfaces on DUT node | ${dut2} +| | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 +| | | ... | dut2-memif-${number}-if2 +| | | Add interface to bridge domain | ${dut2} +| | | ... | ${dut2-memif-${number}-if1} | ${number} +| | | Add interface to bridge domain | ${dut2} +| | | ... | ${dut2-memif-${number}-if2} | ${bd_id2} diff --git a/resources/libraries/robot/shared/memif.robot b/resources/libraries/robot/shared/memif.robot index 2ce2ea2e8c..71909af490 100644 --- a/resources/libraries/robot/shared/memif.robot +++ b/resources/libraries/robot/shared/memif.robot @@ -42,7 +42,7 @@ | | ... | \| dut2_memif_if1 \| dut2_memif_if2 \| | | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${number}=${1} -| | ... | ${memif_if2}=memif_if1 | ${memif_if1}=memif_if2 +| | ... | ${memif_if1}=memif_if1 | ${memif_if2}=memif_if2 | | ${key_1}= | Evaluate | (${number}*2)-1 | | ${key_2}= | Evaluate | (${number}*2) | | ${memif_1}= | Create memif interface | ${dut_node} | ${sock1} | ${key_1} @@ -62,8 +62,8 @@ | | ... | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 | | | Run Keyword | ${dut}_${lxc_base_name}_${number}.Create VPP cfg in container -| | | ... | memif_create_lxc.vat | socket1=memif-${number}-1 -| | | ... | socket2=memif-${number}-2 +| | | ... | memif_create_lxc.vat | socket1=memif-${dut}_VNF${number}-1 +| | | ... | socket2=memif-${dut}_VNF${number}-2 | Create memif VPP configuration on '${nr}' LXC containers on all DUT nodes | | [Documentation] | Create memif configuration of VPP on multiple LXC diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot new file mode 100644 index 0000000000..0c6d4bdffd --- /dev/null +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot @@ -0,0 +1,233 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | MEMIF | LXC +| ... +| Suite Setup | Run Keywords | Set up 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| ... | AND | Create '${lxc_count}' LXC containers on all DUT nodes with '${lxc_cpu}' cpus +| ... | AND | Install VPP on '${lxc_count}' LXC containers on all DUT nodes +| ... | AND | Create memif VPP configuration on '${lxc_count}' LXC containers on all DUT nodes +| ... | AND | Create startup configuration of VPP on '${lxc_count}' LXC containers on all DUT nodes +| Suite Teardown | Tear down 3-node performance topology with LXC +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance discovery test | ${min_rate}pps +| ... | ${framesize} | ${traffic_profile} +| ... +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 +| ... | bridge domains and MAC learning enabled. LXC is connected to VPP via +| ... | Memif interface. LXC is running same VPP version as running on DUT. LXC +| ... | is limited via cgroup to use 3 cores allocated from pool of isolated +| ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| ${avg_imix_framesize}= | ${357.833} +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} +# Traffic profile: +| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 +# LXC container +| ${lxc_base_name} | slave +| ${lxc_count} | ${1} +| ${lxc_cpu} | ${4} +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} + +*** Keywords *** +| Discover NDR or PDR for L2 Bridge Domain with Memif +| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${get_framesize}= | Set Variable If +| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add PCI Devices To DUTs In 3-node Single Link Topology +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs +| | Apply startup configuration on all VPP DUTs +| | Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology +| | Run Keyword If | '${search_type}' == 'NDR' +| | ... | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ELSE IF | '${search_type}' == 'PDR' +| | ... | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR + +| tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR + +| tc03-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR + +| tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR + +| tc05-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR + +| tc06-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR + +| tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR + +| tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. +| | ... +| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR + +| tc09-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR + +| tc10-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR + +| tc11-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR + +| tc12-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC +| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif +| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR \ No newline at end of file -- cgit 1.2.3-korg