From 3ccdfe158ce748d1892b66d755643fa88fe5920e Mon Sep 17 00:00:00 2001 From: Vratko Polak Date: Wed, 28 Oct 2020 12:50:10 +0100 Subject: Support existing test types with ASTF Manual cherry-pick from master [1], reverting impact of [2] and [3]. [1] https://gerrit.fd.io/r/c/csit/+/28208/176 [2] https://gerrit.fd.io/r/c/csit/+/29077 [3] https://gerrit.fd.io/r/c/csit/+/29529 The heap multipliers are left in suites, as that simplifies cherry-picking between branches. Original [0] commit message: Support existing test types with ASTF + Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak --- .../trex/trex-astf-ethip4tcp-1024h-pps.py | 117 +++++++++++++++++ .../trex/trex-astf-ethip4tcp-1024h.py | 8 +- .../trex/trex-astf-ethip4tcp-16384h-pps.py | 117 +++++++++++++++++ .../trex/trex-astf-ethip4tcp-16384h.py | 8 +- .../trex/trex-astf-ethip4tcp-262144h-pps.py | 117 +++++++++++++++++ .../trex/trex-astf-ethip4tcp-262144h.py | 8 +- .../trex/trex-astf-ethip4tcp-4096h-pps.py | 117 +++++++++++++++++ .../trex/trex-astf-ethip4tcp-4096h.py | 8 +- .../trex/trex-astf-ethip4tcp-65536h-pps.py | 117 +++++++++++++++++ .../trex/trex-astf-ethip4tcp-65536h.py | 8 +- .../trex/trex-astf-ethip4udp-1024h-pps.py | 140 +++++++++++++++++++++ .../trex/trex-astf-ethip4udp-1024h.py | 14 +-- .../trex/trex-astf-ethip4udp-16384h-pps.py | 140 +++++++++++++++++++++ .../trex/trex-astf-ethip4udp-16384h.py | 14 +-- .../trex/trex-astf-ethip4udp-262144h-pps.py | 140 +++++++++++++++++++++ .../trex/trex-astf-ethip4udp-262144h.py | 14 +-- .../trex/trex-astf-ethip4udp-4096h-pps.py | 140 +++++++++++++++++++++ .../trex/trex-astf-ethip4udp-4096h.py | 14 +-- .../trex/trex-astf-ethip4udp-65536h-pps.py | 140 +++++++++++++++++++++ .../trex/trex-astf-ethip4udp-65536h.py | 14 +-- 20 files changed, 1325 insertions(+), 70 deletions(-) create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py create mode 100644 GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py (limited to 'GPL/traffic_profiles') diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py new file mode 100644 index 0000000000..0c22573a09 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.3.255 + - Destination IP address range: 20.0.0.0 - 20.0.3.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.3.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.3.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=64512, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py index 809a954a30..a86355b365 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py new file mode 100644 index 0000000000..c73de7b9c7 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.63.255 + - Destination IP address range: 20.0.0.0 - 20.0.63.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.63.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.63.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=1032192, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py index 0d7f9a5974..4899726fc2 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py new file mode 100644 index 0000000000..007b3668ac --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 172.16.0.0 - 172.19.255.255 + - Destination IP address range: 20.16.0.0 - 20.19.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"172.16.0.0" + self.p1_src_end_ip = u"172.19.255.255" + self.p1_dst_start_ip = u"20.16.0.0" + self.p1_dst_end_ip = u"20.19.255.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=16515072, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py index 6f533844e0..d52d293c92 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py new file mode 100644 index 0000000000..dc2b612057 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.15.255 + - Destination IP address range: 20.0.0.0 - 20.0.15.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.15.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.15.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=258048, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py index acfc5e109a..4ff89a8acb 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py new file mode 100644 index 0000000000..8ba3be5b69 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.255.255 + - Destination IP address range: 20.0.0.0 - 20.0.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.255.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.255.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=4128768, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py index 7d2f5b6265..e5786f4f05 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py new file mode 100644 index 0000000000..3de855442e --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py @@ -0,0 +1,140 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.3.255 + - Destination IP address range: 20.0.0.0 - 20.0.3.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.3.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.3.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 64512 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py index 6bf0d53d1f..dbe97cc440 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py new file mode 100644 index 0000000000..856f5b28a3 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py @@ -0,0 +1,140 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.63.255 + - Destination IP address range: 20.0.0.0 - 20.0.63.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.63.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.63.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 1032192 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py index 9237831aa5..7acebaaeaf 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py new file mode 100644 index 0000000000..f6f7fcfe3d --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py @@ -0,0 +1,140 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 172.16.0.0 - 172.19.255.255 + - Destination IP address range: 20.16.0.0 - 20.19.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"172.16.0.0" + self.p1_src_end_ip = u"172.19.255.255" + self.p1_dst_start_ip = u"20.16.0.0" + self.p1_dst_end_ip = u"20.19.255.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 16515072 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py index 728eba8a04..e8796ec166 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py new file mode 100644 index 0000000000..cd295b1164 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py @@ -0,0 +1,140 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.15.255 + - Destination IP address range: 20.0.0.0 - 20.0.15.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.15.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.15.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 258048 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py index 0807175d36..da367b4ca4 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py new file mode 100644 index 0000000000..f6aaebcf30 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py @@ -0,0 +1,140 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.255.255 + - Destination IP address range: 20.0.0.0 - 20.0.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.255.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.255.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 4128768 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py index 85eaff005c..9aba56a3e4 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], -- cgit 1.2.3-korg