From 342ba492f7066402e35654199193e20135f39b6d Mon Sep 17 00:00:00 2001 From: Maciek Konstantynowicz Date: Thu, 9 May 2019 12:39:52 +0100 Subject: report: further edits of methodology throughput sections Change-Id: I571d1a47743eb31ee10caf3f3336ac7437daf878 Signed-off-by: Maciek Konstantynowicz --- .../methodology_data_plane_throughput.rst | 86 ---------------------- 1 file changed, 86 deletions(-) delete mode 100644 docs/report/introduction/methodology_data_plane_throughput.rst (limited to 'docs/report/introduction/methodology_data_plane_throughput.rst') diff --git a/docs/report/introduction/methodology_data_plane_throughput.rst b/docs/report/introduction/methodology_data_plane_throughput.rst deleted file mode 100644 index 2b5b085452..0000000000 --- a/docs/report/introduction/methodology_data_plane_throughput.rst +++ /dev/null @@ -1,86 +0,0 @@ -Data Plane Throughput ---------------------- - -Network data plane packet and bandwidth throughput are measured using -multiple methods in order to obtain representative and repeatable -results across the large set of performance test cases implemented and -executed within CSIT. Following throughput test methods are used: - -#. MLRsearch: Multiple Loss Ratio search - - - **Description**: MLRsearch discovers multiple packet throughput - rates in a single search, reducing the overall test execution - time compared to a binary search. Each rate associated with a - distinct Packet Loss Ratio (PLR) criteria. In FD.io CSIT two - throughput rates are discovered: Non-Drop Rate (NDR, with zero - packet loss, PLR=0) and Partial Drop Rate (PDR, with PLR<0.5%). - MLRsearch is compliant with :rfc:`2544`. - - **Usage**: MLRsearch tests are run to discover NDR and PDR rates - for each VPP and DPDK release covered by CSIT report. Results for - small frame sizes (64b/78B, IMIX) are presented in packet - throughput graphs (Box-and-Whisker Plots) with NDR and PDR rates - plotted against the test cases covering popular VPP packet paths. - Each test is executed at least 10 times to verify measurements - repeatability and results are compared between releases and test - environments. NDR and PDR packet and bandwidth throughput results - for all frame sizes and for all tests are presented in detailed - results tables. - - **References**: See :ref:`mlrsearch_algorithm` for more detailed - description of MLRsearch tests. MLRsearch is being standardized - in IETF with `draft-vpolak-mkonstan-mlrsearch - `_. - -#. MRR Measurements: Maximum Receive Rate - - - **Description**: MRR tests are complementary to MLRsearch tests, - as they provide a maximum “raw” throughput benchmark for - development and testing community. MRR tests measure the packet - forwarding rate under the maximum load offered by traffic - generator (dependent on link type and NIC model) over a set trial - duration, regardless of packet loss. Maximum load for specified - Ethernet frame size is set to the bi-directional link rate. - - **Usage**: MRR tests are much faster than MLRsearch as they rely - on a single trial or a small set of trials with very short - duration. It is this property that makes them suitable for - continuous execution in daily performance trending jobs enabling - detection of performance anomalies (regressions, progressions) - resulting from data plane code changes. MRR tests are also used - for VPP per patch performance jobs verifying patch performance - vs. parent. CSIT reports include MRR throughput comparisons - between releases and test environments. Small frame sizes only - (64b/78B, IMIX). - - **References**: See :ref:`mrr_throughput` for more detailed - description of MRR tests configuration used for daily performance - trending jobs. VPP per patch test methodology is available on - `FD.io CSIT trending pages - `_. - -#. PLRsearch: Probabilistic Loss Ratio search - - - **Description**: PLRsearch discovers a packet throughput rate - associated with configured Packet Loss Ratio (PLR) criteria for - tests run over an extended period of time a.k.a. soak testing. - PLRsearch assumes that system under test is probabilistic in - nature, and not deterministic. - - **Usage**: PLRsearch are run to discover a sustained throughput - for PLR=10^-7 (close to NDR) for VPP release covered by CSIT - report. Results for small frame sizes (64b/78B) are presented in - packet throughput graphs (Box Plots) for a small subset of - baseline tests. Each soak test lasts 2hrs and is executed at - least twice. Results are compared against NDR and PDR rates - discovered with MLRsearch. - - **References**: See :ref:`plrsearch_algorithm` for more detailed - description of PLRsearch tests. PLRsearch is being standardized - in IETF with `draft-vpolak-bmwg-plrsearch - `_. - -All of the listed data plane throughput test methodologies share -following properties: - -- Tested L2 frame sizes (untagged Ethernet): - - - IPv4 payload: 64B, IMIX (28x64B, 16x570B, 4x1518B), 1518B, 9000B. - - IPv6 payload: 78B, IMIX (28x78B, 16x570B, 4x1518B), 1518B, 9000B. - -- All measured rates are aggregate bi-directional rates reported from - external Traffic Generator perspective. \ No newline at end of file -- cgit 1.2.3-korg