From 6809aeefd0f2b951cd4861f676ee2dff0df47ff2 Mon Sep 17 00:00:00 2001 From: Vratko Polak Date: Mon, 17 Oct 2022 15:08:16 +0200 Subject: fix(report): unify .rst section marks Unify characters marking section levels, (at least for methodology Vratko contributed to): Level 0: ==== Do not use, or use for index.rst only. (Because git conflicts also create ====.) Level 1: ^^^^ Level 2: ~~~~ Level 3: ```` Level 4: ____ Level 5: ---- Do not use. (Because other documents use this as level 0, and it also appears in tables.) Change-Id: I10813f718b2ee34d1e34c58e62e88353000340e9 Signed-off-by: Vratko Polak --- .../methodology_data_plane_throughput.rst | 28 +++++++++++----------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'docs/report/introduction/methodology_data_plane_throughput/methodology_data_plane_throughput.rst') diff --git a/docs/report/introduction/methodology_data_plane_throughput/methodology_data_plane_throughput.rst b/docs/report/introduction/methodology_data_plane_throughput/methodology_data_plane_throughput.rst index a26b40088b..24e76ef391 100644 --- a/docs/report/introduction/methodology_data_plane_throughput/methodology_data_plane_throughput.rst +++ b/docs/report/introduction/methodology_data_plane_throughput/methodology_data_plane_throughput.rst @@ -1,7 +1,7 @@ .. _data_plane_throughput: Data Plane Throughput Tests ---------------------------- +^^^^^^^^^^^^^^^^^^^^^^^^^^^ Network data plane throughput is measured using multiple test methods in order to obtain representative and repeatable results across the large @@ -21,10 +21,10 @@ Description of each test method is followed by generic test properties shared by all methods. MLRsearch Tests -^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~ Description -~~~~~~~~~~~ +``````````` Multiple Loss Ratio search (MLRsearch) tests discover multiple packet throughput rates in a single search, reducing the overall test execution @@ -35,7 +35,7 @@ and Partial Drop Rate (PDR, with PLR<0.5%). MLRsearch is compliant with :rfc:`2544`. Usage -~~~~~ +````` MLRsearch tests are run to discover NDR and PDR rates for each VPP and DPDK release covered by CSIT report. Results for small frame sizes @@ -50,17 +50,17 @@ all frame sizes and for all tests are presented in detailed results tables. Details -~~~~~~~ +``````` See :ref:`mlrsearch_algorithm` section for more detail. MLRsearch is being standardized in IETF in `draft-ietf-bmwg-mlrsearch `_. MRR Tests -^^^^^^^^^ +~~~~~~~~~ Description -~~~~~~~~~~~ +``````````` Maximum Receive Rate (MRR) tests are complementary to MLRsearch tests, as they provide a maximum “raw” throughput benchmark for development and @@ -72,7 +72,7 @@ a set trial duration, regardless of packet loss. Maximum load for specified Ethernet frame size is set to the bi-directional link rate. Usage -~~~~~ +````` MRR tests are much faster than MLRsearch as they rely on a single trial or a small set of trials with very short duration. It is this property @@ -86,7 +86,7 @@ comparisons between releases and test environments. Small frame sizes only (64b/78B, IMIX). Details -~~~~~~~ +``````` See :ref:`mrr_throughput` section for more detail about MRR tests configuration. @@ -98,10 +98,10 @@ and `VPP per patch tests `_. PLRsearch Tests -^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~ Description -~~~~~~~~~~~ +``````````` Probabilistic Loss Ratio search (PLRsearch) tests discovers a packet throughput rate associated with configured Packet Loss Ratio (PLR) @@ -110,7 +110,7 @@ testing. PLRsearch assumes that system under test is probabilistic in nature, and not deterministic. Usage -~~~~~ +````` PLRsearch are run to discover a sustained throughput for PLR=10^-7 (close to NDR) for VPP release covered by CSIT report. Results for small @@ -121,14 +121,14 @@ Each soak test lasts 30 minutes and is executed at least twice. Results are compared against NDR and PDR rates discovered with MLRsearch. Details -~~~~~~~ +``````` See :ref:`plrsearch` methodology section for more detail. PLRsearch is being standardized in IETF in `draft-vpolak-bmwg-plrsearch `_. Generic Test Properties -^^^^^^^^^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~~~~~~~~~ All data plane throughput test methodologies share following generic properties: -- cgit 1.2.3-korg