From 43480e631defcb2fa40cc35e48ee40ce31b1dd68 Mon Sep 17 00:00:00 2001
From: Tibor Frank <tifrank@cisco.com>
Date: Mon, 16 Jul 2018 15:32:57 +0200
Subject: CSIT-1196: Add hsw/skx and 2n/3n to the report structure

Change-Id: I3a0cc2792b931798e466250e30bc30ad8a32b84e
Signed-off-by: Tibor Frank <tifrank@cisco.com>
---
 .../packet_latency_graphs/ip6_tunnels.rst          | 52 ++++++++++++++--------
 1 file changed, 34 insertions(+), 18 deletions(-)

(limited to 'docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst')

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
index 12d21f6bf3..dbbb592446 100644
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst
@@ -1,5 +1,5 @@
-IPv6 Overlay Tunnels
-====================
+IPv6 Tunnels
+============
 
 This section includes summary graphs of VPP Phy-to-Phy packet latency
 with IPv6 Overlay Tunnels measured at 50% of discovered NDR throughput
@@ -7,42 +7,58 @@ rate. Latency is reported for VPP running in multiple configurations of
 VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
 physical CPU core(s) placement.
 
-VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph below.
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1807>`_.
+
+3n-hsw-x520
+~~~~~~~~~~~
+
+78b-1t1c-base_and_scale
+-----------------------
+
+.. raw:: html
+
+    <center><b>
+
+:index:`Latency: ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr`
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ndrdisc-lat50.html"></iframe>
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50.html"></iframe>
+    <p><br><br></p>
+    </center>
 
 .. raw:: latex
 
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ndrdisc-lat50}
-            \label{fig:78B-1t1c-ethip6-ndrdisc-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50}
+            \label{fig:ip6tun-3n-hsw-x520-78b-1t1c-base_and_scale-ndr-lat50}
     \end{figure}
 
-*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
+78b-2t2c-base_and_scale
+-----------------------
+
+.. raw:: html
 
-CSIT source code for the test cases used for above plots can be found in
-`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
+    <center><b>
 
-VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
+:index:`Latency: ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr`
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ndrdisc-lat50.html"></iframe>
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50.html"></iframe>
+    <p><br><br></p>
+    </center>
 
 .. raw:: latex
 
     \begin{figure}[H]
         \centering
             \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ndrdisc-lat50}
-            \label{fig:78B-2t2c-ethip6-ndrdisc-lat50}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50}
+            \label{fig:ip6tun-3n-hsw-x520-78b-2t2c-base_and_scale-ndr-lat50}
     \end{figure}
-
-*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.*
-
-CSIT source code for the test cases used for above plots can be found in
-`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6_tunnels?h=rls1804>`_.
-- 
cgit 1.2.3-korg