From 4fbf1ec2d535d322725d395c369b6c9f7222c8dd Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Wed, 9 May 2018 11:26:04 +0200 Subject: Report: remove greps Change-Id: I57fee701a99bcdb4f523011fa774c42ecdacdde4 Signed-off-by: Tibor Frank --- .../packet_latency_graphs/container_memif.rst | 32 ++--------- .../container_orchestrated.rst | 32 ++--------- .../packet_latency_graphs/ip4.rst | 32 ++--------- .../packet_latency_graphs/ip4_tunnels.rst | 32 ++--------- .../packet_latency_graphs/ip6.rst | 32 ++--------- .../packet_latency_graphs/ip6_tunnels.rst | 33 ++---------- .../packet_latency_graphs/ipsec.rst | 32 ++--------- .../packet_latency_graphs/l2.rst | 62 +++------------------- .../packet_latency_graphs/srv6.rst | 32 ++--------- .../packet_latency_graphs/vm_vhost.rst | 38 ++++--------- 10 files changed, 50 insertions(+), 307 deletions(-) (limited to 'docs/report/vpp_performance_tests/packet_latency_graphs') diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst index cac2916d92..e604605ffc 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst @@ -25,20 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -58,17 +46,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst index 83181bf420..60e80cea83 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst @@ -25,20 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -58,17 +46,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/kubernetes/perf/container_memif - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst index d2ffc890fe..7ea8af4af8 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4 - $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst index ad818ffbcf..c1482514ca 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip4_tunnels.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv4 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip4_tunnels - $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst index c2e5102450..622813d763 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6 - $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst index 4f8809bb8d..12d21f6bf3 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ip6_tunnels.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,18 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPv6 Overlay Tunnels.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/ip6_tunnels - $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst index 952ec51e8c..0c8f3de767 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/ipsec.rst @@ -28,20 +28,8 @@ below. *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -60,17 +48,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy IPSec HW with IPv4 Routed-Forwarding.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/crypto - $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst index 7842fc8343..a430d5525d 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst @@ -25,19 +25,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -55,20 +44,8 @@ git repository: *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet Switching (feature).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -88,19 +65,8 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (base).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. .. raw:: html @@ -118,17 +84,5 @@ git repository: *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet Switching (feature).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/l2 - $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn).*-(iacl50(-state(ful|less)|sl)-(flows10k.*|10kflows.*)|oacl50-state(ful|less)-flows10k.*)-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst index bb45c4b9a5..163d892cde 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst @@ -24,20 +24,8 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -56,17 +44,5 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy SRv6.* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/srv6 - $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst index 4a9aa6c9fb..5eb8a5750c 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/vm_vhost.rst @@ -26,6 +26,9 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo *Figure 1a. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (ipv4).* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -42,20 +45,8 @@ vhost-user selected TCs (ipv4).* *Figure 1b. VPP 1thread 1core - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (l2).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-1t1c-.*vhost.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -75,6 +66,9 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo *Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (ipv4).* +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. + .. raw:: html @@ -91,17 +85,5 @@ vhost-user selected TCs (ipv4).* *Figure 2b. VPP 2threads 2cores - packet latency for Phy-to-VM-to-Phy VM vhost-user selected TCs (l2).* -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/vpp/perf/vm_vhost - $ grep -E "64B-2t2c-.*vhost.*-ndrdisc" * +CSIT source code for the test cases used for above plots can be found in +`CSIT git repository `_. -- cgit 1.2.3-korg