From 4bfd1dcd604dac12d1dd00ba63c0d5e4170a1f2b Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Fri, 4 May 2018 13:41:43 +0200 Subject: Report: Add TSA plots Change-Id: Ibb8da96518848fef2fc5b0002a84391dea81c573 Signed-off-by: Tibor Frank --- .../container_memif.rst | 90 +++++++ .../container_orchestrated.rst | 158 +++++++++++ .../throughput_speedup_multi_core/index.rst | 6 + .../throughput_speedup_multi_core/ip4_tunnels.rst | 90 +++++++ .../throughput_speedup_multi_core/ip6_tunnels.rst | 90 +++++++ .../throughput_speedup_multi_core/ipsec.rst | 95 +++++++ .../throughput_speedup_multi_core/vm_vhost.rst | 289 +++++++++++++++++++++ 7 files changed, 818 insertions(+) create mode 100644 docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst create mode 100644 docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst create mode 100644 docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst create mode 100644 docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst create mode 100644 docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst create mode 100644 docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst (limited to 'docs/report/vpp_performance_tests') diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst new file mode 100644 index 0000000000..c95b3f57ee --- /dev/null +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_memif.rst @@ -0,0 +1,90 @@ +Container memif Connections +=========================== + +Following sections include Throughput Speedup Analysis for VPP multi- +core multi-thread configurations with no Hyper-Threading, specifically +for tested 2t2c (2threads, 2cores) and 4t4c scenarios. 1t1c throughput +results are used as a reference for reported speedup ratio. +Performance is reported for VPP +running in multiple configurations of VPP worker thread(s), a.k.a. VPP +data plane thread(s), and their physical CPU core(s) placement. + +NDR Throughput +-------------- + +VPP NDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 network interface card. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-container-memif-tsa-ndrdisc} + \label{fig:10ge2p1x520-64B-container-memif-tsa-ndrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + +*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* + +PDR Throughput +-------------- + +VPP PDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 network interface card. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-container-memif-tsa-pdrdisc} + \label{fig:10ge2p1x520-64B-container-memif-tsa-pdrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + +*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* \ No newline at end of file diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst new file mode 100644 index 0000000000..5bc49a7d97 --- /dev/null +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/container_orchestrated.rst @@ -0,0 +1,158 @@ +Container Orchestrated Topologies +================================= + +Following sections include Throughput Speedup Analysis for VPP multi- +core multi-thread configurations with no Hyper-Threading, specifically +for tested 2t2c (2threads, 2cores) and 4t4c scenarios. 1t1c throughput +results are used as a reference for reported speedup ratio. +Performance is reported for VPP +running in multiple configurations of VPP worker thread(s), a.k.a. VPP +data plane thread(s), and their physical CPU core(s) placement. + +NDR Throughput +-------------- + +VPP NDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 and 10ge2p1x710 network interface cards. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-container-orchestrated-tsa-ndrdisc} + \label{fig:10ge2p1x520-64B-container-orchestrated-tsa-ndrdisc} + \end{figure} + +*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x520* + +NIC 10ge2p1x710 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x710-64B-container-orchestrated-tsa-ndrdisc} + \label{fig:10ge2p1x710-64B-container-orchestrated-tsa-ndrdisc} + \end{figure} + +*Figure 2. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" 10ge2p1x710* + +PDR Throughput +-------------- + +VPP PDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 and 10ge2p1x710 network interface cards. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-container-orchestrated-tsa-pdrdisc} + \label{fig:10ge2p1x520-64B-container-orchestrated-tsa-pdrdisc} + \end{figure} + +*Figure 3. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x520* + +NIC 10ge2p1x710 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x710-64B-container-orchestrated-tsa-pdrdisc} + \label{fig:10ge2p1x710-64B-container-orchestrated-tsa-pdrdisc} + \end{figure} + +*Figure 4. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/kubernetes/perf/container_memif && grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-(1t1c|2t2c|4t4c)-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" 10ge2p1x710* diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/index.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/index.rst index ddce548b6c..10b5f1644a 100644 --- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/index.rst +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/index.rst @@ -18,3 +18,9 @@ threaded VPP configurations relative to 1-core configurations. l2 ip4 ip6 + ip4_tunnels + ip6_tunnels + vm_vhost + container_memif + container_orchestrated + ipsec diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst new file mode 100644 index 0000000000..222046e4c2 --- /dev/null +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4_tunnels.rst @@ -0,0 +1,90 @@ +IPv4 Overlay Tunnels +==================== + +Following sections include Throughput Speedup Analysis for VPP multi- +core multi-thread configurations with no Hyper-Threading, specifically +for tested 2t2c (2threads, 2cores) and 4t4c scenarios. 1t1c throughput +results are used as a reference for reported speedup ratio. +Performance is reported for VPP +running in multiple configurations of VPP worker thread(s), a.k.a. VPP +data plane thread(s), and their physical CPU core(s) placement. + +NDR Throughput +-------------- + +VPP NDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 network interface card. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-ethip4-tsa-ndrdisc} + \label{fig:10ge2p1x520-64B-ethip4-tsa-ndrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4_tunnels + $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * + +*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* + +PDR Throughput +-------------- + +VPP PDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 network interface card. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-ethip4-tsa-pdrdisc} + \label{fig:10ge2p1x520-64B-ethip4-tsa-pdrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4_tunnels + $ grep -E "64B-(1t1c|2t2c|4t4c)-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * + +*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst new file mode 100644 index 0000000000..eec062faef --- /dev/null +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip6_tunnels.rst @@ -0,0 +1,90 @@ +IPv6 Overlay Tunnels +==================== + +Following sections include Throughput Speedup Analysis for VPP multi- +core multi-thread configurations with no Hyper-Threading, specifically +for tested 2t2c (2threads, 2cores) and 4t4c scenarios. 1t1c throughput +results are used as a reference for reported speedup ratio. +Performance is reported for VPP +running in multiple configurations of VPP worker thread(s), a.k.a. VPP +data plane thread(s), and their physical CPU core(s) placement. + +NDR Throughput +-------------- + +VPP NDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 network interface card. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-ethip6-tsa-ndrdisc} + \label{fig:10ge2p1x520-78B-ethip6-tsa-ndrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6_tunnels + $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * + +*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* + +PDR Throughput +-------------- + +VPP PDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520 network interface card. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-78B-ethip6-tsa-pdrdisc} + \label{fig:10ge2p1x520-78B-ethip6-tsa-pdrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6_tunnels + $ grep -E "78B-(1t1c|2t2c|4t4c)-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * + +*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst new file mode 100644 index 0000000000..678e00fec5 --- /dev/null +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ipsec.rst @@ -0,0 +1,95 @@ +IPSec Crypto HW: IP4 Routed-Forwarding +====================================== + +Following sections include Throughput Speedup Analysis for VPP multi- +core multi-thread configurations with no Hyper-Threading, specifically +for tested 2t2c (2threads, 2cores) and 4t4c scenarios. 1t1c throughput +results are used as a reference for reported speedup ratio. +VPP IPSec encryption is accelerated using DPDK cryptodev +library driving Intel Quick Assist (QAT) crypto PCIe hardware cards. +Performance is reported for VPP running in multiple configurations of +VPP worker thread(s), a.k.a. VPP data plane thread(s), and their +physical CPU core(s) placement. + +NDR Throughput +-------------- + +VPP NDR 64B packet throughput speedup ratio is presented in the graphs +below for 40ge2p1xl710 network interface card. + +NIC 40ge2p1xl710 +~~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-ndrdisc} + \label{fig:40ge2p1xl710-64B-ipsechw-tsa-ndrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/crypto + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-ndrdisc" * + +*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy IPSEC HW.* + +PDR Throughput +-------------- + +VPP PDR 64B packet throughput speedup ratio is presented in the graphs +below for 40ge2p1xl710 network interface card. + +NIC 40ge2p1xl710 +~~~~~~~~~~~~~~~~ + +VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented +in the graph below. PDR measured for 0.5% packet loss ratio. + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ipsechw-tsa-pdrdisc} + \label{fig:40ge2p1xl710-64B-ipsechw-tsa-pdrdisc} + \end{figure} + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/crypto && grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/crypto + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*ipsec.*-pdrdisc" * + +*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy IPSEC HW.* diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst new file mode 100644 index 0000000000..9a1c3df0eb --- /dev/null +++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/vm_vhost.rst @@ -0,0 +1,289 @@ +VM vhost Connections +==================== +Following sections include Throughput Speedup Analysis for VPP multi- +core multi-thread configurations with no Hyper-Threading, specifically +for tested 2t2c (2threads, 2cores) and 4t4c scenarios. 1t1c throughput +results are used as a reference for reported speedup ratio. Input data +used for the graphs comes from Phy-to-Phy 64B performance tests with +VM vhost-user, including NDR throughput (zero packet loss) and +PDR throughput (<0.5% packet loss). + +NDR Throughput +-------------- + +VPP NDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520, 10ge2p1x710 and 40ge2p1xl710 network interface cards. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-vhost-sel1-tsa-ndrdisc} + \label{fig:10ge2p1x520-64B-vhost-sel1-tsa-ndrdisc} + \end{figure} + +*Figure 1a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-vhost-sel2-tsa-ndrdisc} + \label{fig:10ge2p1x520-64B-vhost-sel2-tsa-ndrdisc} + \end{figure} + +*Figure 1b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x520* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x520* + +NIC 10ge2p1x710 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x710-64B-vhost-sel2-tsa-ndrdisc} + \label{fig:10ge2p1x710-64B-vhost-sel2-tsa-ndrdisc} + \end{figure} + +*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 10ge2p1x710* + +NIC 40ge2p1xl710 +~~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-vhost-sel1-tsa-ndrdisc} + \label{fig:40ge2p1xl710-64B-vhost-sel1-tsa-ndrdisc} + \end{figure} + +*Figure 3a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-vhost-sel2-tsa-ndrdisc} + \label{fig:40ge2p1xl710-64B-vhost-sel2-tsa-ndrdisc} + \end{figure} + +*Figure 3b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +NDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-ndrdisc" 40ge2p1xl710* + +PDR Throughput +-------------- + +VPP PDR 64B packet throughput speedup ratio is presented in the graphs +below for 10ge2p1x520, 10ge2p1x710 and 40ge2p1xl710 network interface cards. + +NIC 10ge2p1x520 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-vhost-sel1-tsa-pdrdisc} + \label{fig:10ge2p1x520-64B-vhost-sel1-tsa-pdrdisc} + \end{figure} + +*Figure 4a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-vhost-sel2-tsa-pdrdisc} + \label{fig:10ge2p1x520-64B-vhost-sel2-tsa-pdrdisc} + \end{figure} + +*Figure 4b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x520* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x520* + +NIC 10ge2p1x710 +~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x710-64B-vhost-sel2-tsa-pdrdisc} + \label{fig:10ge2p1x710-64B-vhost-sel2-tsa-pdrdisc} + \end{figure} + +*Figure 5. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 10ge2p1x710* + +NIC 40ge2p1xl710 +~~~~~~~~~~~~~~~~ + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-vhost-sel1-tsa-pdrdisc} + \label{fig:40ge2p1xl710-64B-vhost-sel1-tsa-pdrdisc} + \end{figure} + +*Figure 6a. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +.. raw:: html + + + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-vhost-sel2-tsa-pdrdisc} + \label{fig:40ge2p1xl710-64B-vhost-sel2-tsa-pdrdisc} + \end{figure} + +*Figure 6b. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized +PDR Throughput for Phy-to-Phy VM vhost-user selected TCs.* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/vm_vhost && grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710* + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-(1t1c|2t2c|4t4c)-.*vhost.*-pdrdisc" 40ge2p1xl710* -- cgit 1.2.3-korg