From 42fdef709bc1b1b557ce6f74609c729ac00ab8c3 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 9 Aug 2019 10:14:34 +0000 Subject: Clean: L2 bridge domain Signed-off-by: Peter Mikus Change-Id: I3721900b91a9c8e9db8766bdcb9771b6bcf95bca --- .../performance/performance_configuration.robot | 815 --------------------- 1 file changed, 815 deletions(-) (limited to 'resources/libraries/robot/performance') diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index c1b52757f2..09382d736e 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -325,33 +325,6 @@ | | ... | ELSE | Fail | Unsupported behaviour: ${behavior} | | Set interfaces in path up -| Initialize L2 bridge domain in circular topology -| | [Documentation] -| | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD -| | ... | that is created automatically with index 1. Learning is enabled. -| | ... | Interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id - Bridge domain ID. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain in circular topology \| 1 \| -| | ... -| | [Arguments] | ${bd_id}=${1} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id} - | Configure IPv4 ACLs | | [Documentation] | | ... | Configure ACL with required number of not-hitting permit ACEs plus two @@ -447,34 +420,6 @@ | | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | output | | ... | ${acl_list} -| Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge -| | ... | domain that is created automatically with index 1. Learning is -| | ... | enabled. Interfaces are brought up. Apply required ACL rules to DUT1 -| | ... | interfaces. -| | ... -| | ... | *Arguments:* -| | ... | _None_ -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node \ -| | ... | circular topology \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | Set interfaces in path up -| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} - | Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node @@ -639,490 +584,6 @@ | | Run Keyword Unless | '${dut_if2}' == '${NONE}' | | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx} -| Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge -| | ... | domain that is created automatically with index 1. Learning is -| | ... | enabled. Interfaces are brought up. Apply required MACIP ACL rules to -| | ... | DUT1 interfaces. -| | ... -| | ... | *Arguments:* -| | ... | _None_ -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node \ -| | ... | circular topology \| -| | ... -| | ... | _NOTE 1:_ This KW uses following test case variables: -| | ... | - tg - TG node. -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - tg_if1 - TG interface towards DUT1. -| | ... | - tg_if2 - TG interface towards DUT2. -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | Set interfaces in path up -| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | Configure MACIP ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Initialize L2 bridge domains with Vhost-User on node -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on -| | ... | defined VPP node. Add each Vhost-User interface into L2 bridge -| | ... | domains with learning enabled with physical inteface or Vhost-User -| | ... | interface of another VM. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for VM are defined in following format: -| | ... | - /var/run/vpp/sock-\${VM_ID}-1 -| | ... | - /var/run/vpp/sock-\${VM_ID}-2 -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User on node \| DUT1 \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1} -| | ... -| | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain} -| | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain} -| | ${dut_str}= | Convert To Lowercase | ${dut} -| | Add interface to bridge domain -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1} -| | ... | ${bd_id1} -| | Add interface to bridge domain -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2} -| | ... | ${bd_id2} -| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes} + 1 -| | | ${qemu_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node} -| | | Configure vhost interfaces for L2BD forwarding -| | | ... | ${nodes['${dut}']} -| | | ... | /var/run/vpp/sock-${qemu_id}-1 | /var/run/vpp/sock-${qemu_id}-2 -| | | ... | ${dut}-vhost-${qemu_id}-if1 | ${dut}-vhost-${qemu_id}-if2 -| | | ${bd_id1}= | Evaluate | ${qemu_id} + (${nf_chain} - 1) -| | | ${bd_id2}= | Evaluate | ${bd_id1} + 1 -| | | Add interface to bridge domain -| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if1} | ${bd_id1} -| | | Add interface to bridge domain -| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if2} | ${bd_id2} - -| Initialize L2 bridge domains with Vhost-User -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VNF nodes -| | ... | on all defined VPP nodes. Add each Vhost-User interface into L2 bridge -| | ... | domains with learning enabled with physical inteface or Vhost-User -| | ... | interface of another VM. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} -| | ... -| | :FOR | ${dut} | IN | @{duts} -| | | Initialize L2 bridge domains with Vhost-User on node -| | | ... | ${dut} | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} - -| Initialize L2 bridge domains for multiple chains with Vhost-User -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of NF chains -| | ... | with defined number of VNF nodes on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface or Vhost-User interface of another VM. -| | ... | Put all interfaces in path up. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chains - Number of chains of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains for multiple chains with Vhost-User \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} -| | ... -| | Set interfaces in path up -| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains} + 1 -| | | Initialize L2 bridge domains with Vhost-User -| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} - -| Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2 bridge domain topology with VXLANoIPv4 by connecting -| | ... | physical and vxlan interfaces on each DUT. All interfaces are brought -| | ... | up. IPv4 addresses with prefix /24 are configured on interfaces -| | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as -| | ... | interfaces. -| | ... -| | Set interfaces in path up -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 -| | ... | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 -| | ... | 24 -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} -| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 -| | ... | 172.16.0.1 | 172.16.0.2 -| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 -| | ... | 172.16.0.2 | 172.16.0.1 -| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} -| | Configure L2BD forwarding | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} - -| Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2 bridge domain topology with VLAN and VXLANoIPv4 by connecting -| | ... | pairs of VLAN sub-interface and VXLAN interface to separate L2 bridge -| | ... | domain on each DUT. All interfaces are brought up. IPv4 addresses -| | ... | with prefix /32 are configured on interfaces between DUTs. VXLAN -| | ... | sub-interfaces has same IPv4 address as interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - vxlan_count - VXLAN count. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node \ -| | ... | \| circular topology \| ${1} \| -| | ... -| | [Arguments] | ${vxlan_count}=${1} -| | ... -| | Set interfaces in path up -| | ... -| | ${bd_id_start}= | Set Variable | ${1} -| | ${vni_start} = | Set Variable | ${20} -| | ... -| | ${ip_step} = | Set Variable | ${2} -| | ${dut1_ip_start}= | Set Variable | 172.16.0.1 -| | ${dut2_ip_start}= | Set Variable | 172.16.0.2 -| | ... -| | Vpp create multiple VXLAN IPv4 tunnels | node=${dut1} -| | ... | node_vxlan_if=${dut1_if2} | node_vlan_if=${dut1_if1} -| | ... | op_node=${dut2} | op_node_if=${dut2_if1} | n_tunnels=${vxlan_count} -| | ... | vni_start=${vni_start} | src_ip_start=${dut1_ip_start} -| | ... | dst_ip_start=${dut2_ip_start} | ip_step=${ip_step} -| | ... | bd_id_start=${bd_id_start} -| | Vpp create multiple VXLAN IPv4 tunnels | node=${dut2} -| | ... | node_vxlan_if=${dut2_if1} | node_vlan_if=${dut2_if2} -| | ... | op_node=${dut1} | op_node_if=${dut1_if2} | n_tunnels=${vxlan_count} -| | ... | vni_start=${vni_start} | src_ip_start=${dut2_ip_start} -| | ... | dst_ip_start=${dut1_ip_start} | ip_step=${ip_step} -| | ... | bd_id_start=${bd_id_start} - -| Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. -| | ... | Setup VXLANoIPv4 between DUTs by connecting physical and vxlan -| | ... | interfaces on each DUT. All interfaces are brought up. -| | ... | IPv4 addresses with prefix /24 are configured on interfaces between -| | ... | DUTs. VXLAN sub-interfaces has same IPv4 address as interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| L2 bridge domains with Vhost-User and VXLANoIPv4 initialized in a\ -| | ... | 3-node circular topology \| 1 \| 2 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} -| | ... -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 -| | ... | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 -| | ... | 24 -| | Set interfaces in path up -| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 -| | ... | 172.16.0.1 | 172.16.0.2 -| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 -| | ... | 172.16.0.2 | 172.16.0.1 -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} - -| Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on one VPP node. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | one connected to physical interface, the other to VXLAN. -| | ... | Setup VXLANoIPv4 between DUTs and TG by connecting physical and vxlan -| | ... | interfaces on the DUT. All interfaces are brought up. -| | ... | IPv4 addresses with prefix /24 are configured on interfaces between -| | ... | DUT and TG. -| | ... -| | ... | *Arguments:* -| | ... | - dut1_address - Address of physical interface on DUT1. Type: string -| | ... | - dut1_address_subnet - Subnet of the address of physical interface on -| | ... | DUT1. Type: string -| | ... | - dut2_address - Address of physical interface on DUT2. Type: string -| | ... | - dut2_address_subnet - Subnet of the address of physical interface on -| | ... | DUT2. Type: string -| | ... | - dut1_gw - Address of the _gateway_ to which the traffic will be -| | ... | forwarded on DUT1. Type: string -| | ... | - dut2_gw - Address of the _gateway_ to which the traffic will be -| | ... | forwarded on DUT2. Type: string -| | ... | - dut1_vxlans - List of VXLAN params to be configured on DUT1. -| | ... | Type: list of dicts, dict params vni, vtep -| | ... | - dut2_vxlans - List of VXLAN params to be configured on DUT2. -| | ... | Type: list of dicts, dict params vni, vtep -| | ... | - dut1_route_subnet - Subnet address to forward to _gateway_ on DUT1. -| | ... | Type: string -| | ... | - dut1_route_mask - Subnet address mask to forward to _gateway_ -| | ... | on DUT1. Type: string -| | ... | - dut2_route_subnet - Subnet address to forward to _gateway_ on DUT2. -| | ... | Type: string -| | ... | - dut2_route_mask - Subnet address mask to forward to _gateway_ -| | ... | on DUT2. Type: string -| | ... -| | ... | *Example:* -| | ... -| | [Arguments] | ${dut1_address} | ${dut1_address_subnet} | -| | ... | ${dut2_address} | ${dut2_address_subnet} | ${dut1_gw} | ${dut2_gw} | -| | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | -| | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} -| | ... -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${dut1_bd_id1} -| | ... | /var/run/vpp/sock-1-${dut1_bd_id2} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | -| | ... | ${dut1_address} | ${dut1_address_subnet} -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} | -| | ... | ${dut2_address} | ${dut2_address_subnet} -| | ${dut1_bd_id1}= | Set Variable | 1 -| | ${dut1_bd_id2}= | Set Variable | 2 -| | ${dut2_bd_id1}= | Set Variable | 1 -| | :FOR | ${vxlan} | IN | @{dut1_vxlans} -| | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | ${vxlan.vni} -| | | ... | ${dut1_address} | ${vxlan.vtep} -| | | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${dut1_bd_id1} -| | :FOR | ${vxlan} | IN | @{dut2_vxlans} -| | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | ${vxlan.vni} -| | | ... | ${dut2_address} | ${vxlan.vtep} -| | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac} -| | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask} -| | ... | gateway=${dut1_gw} | interface=${dut1_if1} -| | Vpp Route Add | ${dut2} | ${dut2_route_subnet} | ${dut2_route_mask} -| | ... | gateway=${dut2_gw} | interface=${dut2_if2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${dut1_bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${dut2_bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} - -| Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology -| | [Documentation] -| | ... | Setup L2 bridge domain topology with learning enabled with VLAN by -| | ... | connecting physical and vlan interfaces on each DUT. In case of 3-node -| | ... | topology create VLAN sub-interfaces between DUTs. In case of 2-node -| | ... | topology create VLAN sub-interface on dut1-if2 interface. All -| | ... | interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with VLAN dot1q sub-interfaces -| | ... | in a 3-node circular topology \| 1 \| 2 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} -| | ... | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} -| | ... | ${bd_id2} - -| Initialize L2 bridge domains with Vhost-User and VLAN in circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. In case of 3-node topology create VLAN -| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN -| | ... | sub-interface on dut1-if2 interface. All interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in circular\ -| | ... | topology \| 1 \| 2 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} -| | ... | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} - -| Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Create one -| | ... | link bonding (BondEthernet) interface on both VPP nodes. Enslave one -| | ... | physical interface towards next DUT by BondEthernet interface. Setup -| | ... | VLAN on BondEthernet interfaces between DUTs. Add one Vhost-User -| | ... | interface into L2 bridge domains with learning enabled with physical -| | ... | interface towards TG and other Vhost-User interface into L2 bridge -| | ... | domains with learning enabled with VLAN sub-interface. All interfaces -| | ... | are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... | - bond_mode - Link bonding mode. Type: string -| | ... | - lb_mode - Load balance mode. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with VPP\ -| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \ -| | ... | \| 10 \| pop-1 \| xor \| l34 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... | ${bond_mode} | ${lb_mode} -| | ... -| | Set interfaces in path up -| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} -| | ... | ${lb_mode} -| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut1_if2} -| | Run Keyword If | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} -| | ... | ${dut1_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} -| | ... | ${dut1_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} -| | ... | ${dut1_eth_bond_if1} -| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} -| | ... | ${lb_mode} -| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2_if1} -| | Run Keyword If | '${if1_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} -| | ... | ${dut2_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} -| | ... | ${dut2_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} -| | ... | ${dut2_eth_bond_if1} -| | VPP Show Bond Data On All Nodes | ${nodes} | verbose=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} -| | ... | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} - | Initialize LISP IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ | | ... | Don`t set route. @@ -1377,282 +838,6 @@ | | Configure deterministic mode for NAT44 | | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 -| Initialize L2 Bridge Domain with memif pairs on DUT node -| | [Documentation] -| | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface -| | ... | to separate L2 bridge domain with one physical or memif interface -| | ... | to create a chain accross DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: dictionary -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Note:* -| | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-\${dut}_CNF\${nf_id}-\${sid} -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain with memif pairs on DUT node \ -| | ... | \| ${dut} \| 1 \| 1 \| -| | ... -| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1} -| | ... | ${auto_scale}=${True} -| | ... -| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} -| | ... | Set Variable | ${rxq_count_int} -| | ... | ELSE | Set Variable | ${1} -| | ${bd_id2}= | Evaluate | ${nf_nodes}+1 -| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1} -| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} -| | ... | ${bd_id2} -| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1 -| | | ${nf_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node} -| | | ${sock1}= | Set Variable | memif-${dut}_CNF -| | | ${sock2}= | Set Variable | memif-${dut}_CNF -| | | Set up memif interfaces on DUT node | ${nodes['${dut}']} -| | | ... | ${sock1} | ${sock2} | ${nf_id} | ${dut}-memif-${nf_id}-if1 -| | | ... | ${dut}-memif-${nf_id}-if2 | ${rxq} | ${rxq} -| | | ${bd_id2}= | Evaluate | ${nf_node}+1 -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id}-if1} | ${nf_node} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id}-if2} | ${bd_id2} - -| Initialize L2 Bridge Domain with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each -| | ... | Memif interface to separate L2 bridge domain with one physical or -| | ... | virtual interface to create a chain accross DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain with memif pairs \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | :FOR | ${dut} | IN | @{duts} -| | | Initialize L2 Bridge Domain with memif pairs on DUT node | ${dut} -| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} -| | | ... | auto_scale=${auto_scale} - -| Initialize L2 Bridge Domain for multiple chains with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces for defined number of NF chains -| | ... | with defined number of NF nodes on all defined VPP nodes. Add each -| | ... | Memif interface into L2 bridge domains with learning enabled -| | ... | with physical inteface or Memif interface of another NF. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chains - Number of chains of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for multiple chains with memif pairs \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1 -| | | Initialize L2 Bridge Domain with memif pairs | nf_chain=${nf_chain} -| | | ... | nf_nodes=${nf_nodes} | auto_scale=${auto_scale} -| | Set interfaces in path up -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 Bridge Domain for pipeline with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each -| | ... | Memif interface to separate L2 bridge domain with one physical or -| | ... | virtual interface to create a service pipeline on DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chain - NF pipe. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for pipeline with memif pairs \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} -| | ... | Set Variable | ${rxq_count_int} -| | ... | ELSE | Set Variable | ${1} -| | :FOR | ${dut} | IN | @{duts} -| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1} -| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | ${2} -| | | ${nf_id_frst}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${1} -| | | ${nf_id_last}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${nf_nodes} -| | | ${sid_frst}= | Evaluate | ${nf_id_frst} * ${2} - ${1} -| | | ${sid_last}= | Evaluate | ${nf_id_last} * ${2} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} -| | | ... | memif-${dut}_CNF | mid=${nf_id_frst} | sid=${sid_frst} -| | | ... | memif_if=${dut}-memif-${nf_id_frst}-if1 -| | | ... | rxq=${rxq} | txq=${rxq} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} -| | | ... | memif-${dut}_CNF | mid=${nf_id_last} | sid=${sid_last} -| | | ... | memif_if=${dut}-memif-${nf_id_last}-if2 -| | | ... | rxq=${rxq} | txq=${rxq} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id_frst}-if1} | ${1} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id_last}-if2} | ${2} - -| Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces for defined number of NF pipelines -| | ... | with defined number of NF nodes on all defined VPP nodes. Add each -| | ... | Memif interface into L2 bridge domains with learning enabled -| | ... | with physical inteface or Memif interface of another NF. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chains - Number of pipelines of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for multiple pipelines with memif \ -| | ... | pairs \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1 -| | | Initialize L2 Bridge Domain for pipeline with memif pairs -| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} -| | | ... | auto_scale=${auto_scale} -| | Set interfaces in path up -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology -| | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each -| | ... | Memif interface to separate L2 bridge domain with one physical or -| | ... | virtual interface to create a chain accross DUT node. In case of -| | ... | 3-node topology create VLAN sub-interfaces between DUTs. In case of -| | ... | 2-node topology create VLAN sub-interface on dut1-if2 interface. All -| | ... | interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain with memif pairs and VLAN in circular\ -| | ... | topology \| 1 \| 2 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | ${number}= | Set Variable | ${1} -| | ${sock1}= | Set Variable | memif-DUT1_CNF -| | ${sock2}= | Set Variable | memif-DUT1_CNF -| | ${memif_if1_name}= | Set Variable | DUT1-memif-${number}-if1 -| | ${memif_if2_name}= | Set Variable | DUT1-memif-${number}-if2 -| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock2} -| | ... | ${number} | ${memif_if1_name} | ${memif_if2_name} | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${${memif_if1_name}} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${${memif_if2_name}} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | ${sock1}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | memif-DUT2_CNF -| | ${sock2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | memif-DUT2_CNF -| | ${memif_if1_name}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | DUT2-memif-${number}-if1 -| | ${memif_if2_name}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | DUT2-memif-${number}-if2 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set up memif interfaces on DUT node | ${dut2} | ${sock1} | ${sock2} -| | ... | ${number} | ${memif_if1_name} | ${memif_if2_name} | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} -| | ... | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${${memif_if1_name}} -| | ... | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${${memif_if2_name}} -| | ... | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| | ... -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 Bridge Domain for single memif -| | [Documentation] -| | ... | Create single Memif interface on all defined VPP nodes. Put Memif -| | ... | interface to separate L2 bridge domain with one physical interface. -| | ... -| | ... | *Arguments:* -| | ... | - number - Memif ID. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid} -| | ... -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads -| | ... | and rxqueues to all DUTs -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for single memif \| 1 \| -| | ... -| | [Arguments] | ${number}=${1} -| | ... -| | :FOR | ${dut} | IN | @{duts} -| | | ${sock}= | Set Variable | memif-${dut}_CNF -| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} -| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1 -| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int} -| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | ${number} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${number}-if1} | ${number} -| | Set single interfaces in path up -| | Show Memif on all DUTs | ${nodes} - | Configure ACLs on a single interface | | [Documentation] | | ... | Configure ACL -- cgit 1.2.3-korg