From 6721e7f09aa95bff6622068332a3f56afad9c87b Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Tue, 20 Jun 2017 13:57:08 +0200 Subject: CSIT-687: Directory structure reorganization Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank Signed-off-by: Maciek Konstantynowicz --- resources/libraries/robot/traffic.robot | 459 -------------------------------- 1 file changed, 459 deletions(-) delete mode 100644 resources/libraries/robot/traffic.robot (limited to 'resources/libraries/robot/traffic.robot') diff --git a/resources/libraries/robot/traffic.robot b/resources/libraries/robot/traffic.robot deleted file mode 100644 index d39784666f..0000000000 --- a/resources/libraries/robot/traffic.robot +++ /dev/null @@ -1,459 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Traffic keywords""" - -*** Settings *** -| Library | resources.libraries.python.IPv6Util -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.TrafficScriptExecutor -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Routing -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.topology.Topology -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/counters.robot -| Documentation | Traffic keywords - -*** Keywords *** -| Send packet and verify headers -| | [Documentation] | Sends packet from IP (with source mac) to IP -| | ... | (with dest mac). There has to be 4 MAC addresses -| | ... | when using 2 node + -| | ... | xconnect (one for each eth). -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: string -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string -| | ... | - tx_src_port - Interface of TG-if1. Type: string -| | ... | - tx_src_mac - MAC address of TG-if1. Type: string -| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string -| | ... | - rx_port - Interface of TG-if1. Type: string -| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string -| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string -| | ... | - encaps_tx - Expected encapsulation on TX side: Dot1q or Dot1ad -| | ... | (Optional). Type: string -| | ... | - vlan_tx - VLAN (inner) tag on TX side (Optional). Type: integer -| | ... | - vlan_outer_tx - .1AD VLAN (outer) tag on TX side (Optional). -| | ... | Type: integer -| | ... | - encaps_rx - Expected encapsulation on RX side: Dot1q or Dot1ad -| | ... | (Optional). Type: string -| | ... | - vlan_rx - VLAN (inner) tag on RX side (Optional). Type: integer -| | ... | - vlan_outer_rx - .1AD VLAN (outer) tag on RX side (Optional). -| | ... | Type: integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Send packet and verify headers \| ${nodes['TG']} \| 10.0.0.1 \ -| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ -| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | -| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} -| | ... | ${rx_dst_mac} -| | ... | ${encaps_tx}=${EMPTY} | ${vlan_tx}=${EMPTY} | ${vlan_outer_tx}=${EMPTY} -| | ... | ${encaps_rx}=${EMPTY} | ${vlan_rx}=${EMPTY} | ${vlan_outer_rx}=${EMPTY} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac | -| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac | -| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} | -| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} -| | ${args}= | Run Keyword If | '${encaps_tx}' == '${EMPTY}' -| | | ... | Set Variable | ${args} -| | ... | ELSE | Catenate -| | ... | ${args} | --encaps_tx ${encaps_tx} | --vlan_tx ${vlan_tx} -| | ${args}= | Run Keyword If | '${encaps_rx}' == '${EMPTY}' -| | | ... | Set Variable | ${args} -| | ... | ELSE | Catenate -| | ... | ${args} | --encaps_rx ${encaps_rx} | --vlan_rx ${vlan_rx} -| | ${args}= | Run Keyword If | '${vlan_outer_tx}' == '${EMPTY}' -| | | ... | Set Variable | ${args} -| | ... | ELSE | Catenate | ${args} | --vlan_outer_tx ${vlan_outer_tx} -| | ${args}= | Run Keyword If | '${vlan_outer_rx}' == '${EMPTY}' -| | | ... | Set Variable | ${args} -| | ... | ELSE | Catenate | ${args} | --vlan_outer_rx ${vlan_outer_rx} -| | Run Traffic Script On Node | send_icmp_check_headers.py | ${tg_node} | -| | ... | ${args} - -| Packet transmission from port to port should fail -| | [Documentation] | Sends packet from ip (with specified mac) to ip -| | ... | (with dest mac). Using keyword : Send packet And Check -| | ... | Headers and subsequently checks the return value -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: string -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string -| | ... | - tx_src_port - Interface of TG-if1. Type: string -| | ... | - tx_src_mac - MAC address of TG-if1. Type: string -| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string -| | ... | - rx_port - Interface of TG-if1. Type: string -| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string -| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Packet transmission from port to port should fail \| ${nodes['TG']} \ -| | ... | \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \ -| | ... | \| 08:00:27:a2:52:5b \| eth3 \| 08:00:27:4d:ca:7a \ -| | ... | \| 08:00:27:7d:fd:10 \| -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | -| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} | -| | ... | ${rx_dst_mac} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac | -| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac | -| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} | -| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} -| | Run Keyword And Expect Error | ICMP echo Rx timeout | -| | ... | Run Traffic Script On Node | send_icmp_check_headers.py -| | ... | ${tg_node} | ${args} - -| Send packet and verify ARP request -| | [Documentation] | Send IP packet from tx_port and check if ARP Request\ -| | ... | packet is received on rx_port. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - tx_src_ip - Source IP address of transferred packet (TG-if1). -| | ... | Type: string -| | ... | - tx_dst_ip - Destination IP address of transferred packet (TG-if2). -| | ... | Type: string -| | ... | - tx_port - Interface from which the IP packet is sent (TG-if1). -| | ... | Type: string -| | ... | - tx_dst_mac - Destination MAC address of IP packet (DUT-if1). -| | ... | Type: string -| | ... | - rx_port - Interface where the IP packet is received (TG-if2). -| | ... | Type: string -| | ... | - rx_src_mac - Source MAC address of ARP packet (DUT-if2). -| | ... | Type: string -| | ... | - rx_arp_src_ip - Source IP address of ARP packet (DUT-if2). -| | ... | Type: string -| | ... | - rx_arp_dst_ip - Destination IP address of ARP packet. Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Send Packet And Check ARP Packet \| ${nodes['TG']} \| 16.0.0.1 \ -| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:cc:4f:54 \ -| | ... | \| eth4 \| 08:00:27:5b:49:dd \| 192.168.2.1 \| 192.168.2.2 \| -| | ... -| | [Arguments] | ${tg_node} | ${tx_src_ip} | ${tx_dst_ip} | ${tx_port} -| | ... | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} | ${rx_arp_src_ip} -| | ... | ${rx_arp_dst_ip} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate -| | ... | --tx_dst_mac | ${tx_dst_mac} | --rx_src_mac | ${rx_src_mac} -| | ... | --tx_src_ip | ${tx_src_ip} | --tx_dst_ip | ${tx_dst_ip} -| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} -| | ... | --rx_arp_src_ip ${rx_arp_src_ip} | --rx_arp_dst_ip ${rx_arp_dst_ip} -| | Run Traffic Script On Node | send_icmp_check_arp.py | ${tg_node} | ${args} - -| Send TCP or UDP packet and verify received packet -| | [Documentation] | Sends TCP or UDP packet with specified source -| | ... | and destination port. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: integer -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer -| | ... | - tx_port - Source interface (TG-if1). Type: string -| | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string -| | ... | - rx_port - Destionation interface (TG-if1). Type: string -| | ... | - rx_mac - MAC address of destination interface (TG-if1). Type: string -| | ... | - protocol - Type of protocol. Type: string -| | ... | - source_port - Source TCP/UDP port. Type: string or integer -| | ... | - destination_port - Destination TCP/UDP port. Type: string or integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Send TCP or UDP packet and verify received packet \| ${nodes['TG']} \ -| | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth2 \| 08:00:27:cc:4f:54 \ -| | ... | \| eth4 \| 08:00:27:c9:6a:d5 \| TCP \| 20 \| 80 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} | -| | ... | ${tx_mac} | ${rx_port} | ${rx_mac} | ${protocol} | ${source_port} -| | ... | ${destination_port} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --tx_mac | ${tx_mac} -| | ... | --rx_mac | ${rx_mac} -| | ... | --src_ip | ${src_ip} -| | ... | --dst_ip | ${dst_ip} -| | ... | --tx_if | ${tx_port_name} -| | ... | --rx_if | ${rx_port_name} -| | ... | --protocol | ${protocol} -| | ... | --source_port | ${source_port} -| | ... | --destination_port | ${destination_port} -| | Run Traffic Script On Node | send_tcp_udp.py -| | ... | ${tg_node} | ${args} - -| TCP or UDP packet transmission should fail -| | [Documentation] | Sends TCP or UDP packet with specified source -| | ... | and destination port. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: integer -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer -| | ... | - tx_port - Source interface (TG-if1). Type: string -| | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string -| | ... | - rx_port - Destionation interface (TG-if1). Type: string -| | ... | - rx_mac - MAC address of destination interface (TG-if1). Type: string -| | ... | - protocol - Type of protocol. Type: string -| | ... | - source_port - Source TCP/UDP port. Type: string or integer -| | ... | - destination_port - Destination TCP/UDP port. Type: string or integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| TCP or UDP packet transmission should fail \| ${nodes['TG']} \ -| | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth2 \| 08:00:27:cc:4f:54 \ -| | ... | \| eth4 \| 08:00:27:c9:6a:d5 \| TCP \| 20 \| 80 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} | -| | ... | ${tx_mac} | ${rx_port} | ${rx_mac} | ${protocol} | ${source_port} -| | ... | ${destination_port} -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --tx_mac | ${tx_mac} -| | ... | --rx_mac | ${rx_mac} -| | ... | --src_ip | ${src_ip} -| | ... | --dst_ip | ${dst_ip} -| | ... | --tx_if | ${tx_port_name} -| | ... | --rx_if | ${rx_port_name} -| | ... | --protocol | ${protocol} -| | ... | --source_port | ${source_port} -| | ... | --destination_port | ${destination_port} -| | Run Keyword And Expect Error | TCP/UDP Rx timeout -| | ... | Run Traffic Script On Node | send_tcp_udp.py -| | ... | ${tg_node} | ${args} - -| Receive and verify router advertisement packet -| | [Documentation] | Wait until RA packet is received and then verify\ -| | ... | specific fields of received RA packet. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | - node - Node where to check for RA packet. Type: dictionary -| | ... | - rx_port - Interface where the packet is received. Type: string -| | ... | - src_mac - MAC address of source interface from which the link-local\ -| | ... | IPv6 address is constructed and checked. Type: string -| | ... | - interval - Configured retransmit interval. Optional. Type: integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Receive and verify router advertisement packet \ -| | ... | \| ${nodes['DUT1']} \| eth2 \| 08:00:27:cc:4f:54 \| -| | ... -| | [Arguments] | ${node} | ${rx_port} | ${src_mac} | ${interval}=${0} -| | ${rx_port_name}= | Get interface name | ${node} | ${rx_port} -| | ${args}= | Catenate -| | ... | --rx_if ${rx_port_name} -| | ... | --src_mac ${src_mac} -| | ... | --interval ${interval} -| | Run Traffic Script On Node | check_ra_packet.py | ${node} | ${args} - -| Send router solicitation and verify response -| | [Documentation] | Send RS packet, wait for response and then verify\ -| | ... | specific fields of received RA packet. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | - tg_node - TG node to send RS packet from. Type: dictionary -| | ... | - dut_node - DUT node to send RS packet to. Type: dictionary -| | ... | - rx_port - Interface where the packet is sent from. Type: string -| | ... | - tx_port - Interface where the packet is sent to. Type: string -| | ... | - src_ip - Source IP address of RS packet. Optional. If not provided,\ -| | ... | link local address will be used. Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Send router solicitation and verify response \ -| | ... | \| ${nodes['TG']} \| ${nodes['DUT1']} \| eth2 \ -| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| -| | ... -| | [Arguments] | ${tg_node} | ${dut_node} | ${tx_port} | ${rx_port} -| | ... | ${src_ip}='' -| | ${src_mac}= | Get Interface Mac | ${tg_node} | ${tx_port} -| | ${dst_mac}= | Get Interface Mac | ${dut_node} | ${rx_port} -| | ${src_int_name}= | Get interface name | ${tg_node} | ${tx_port} -| | ${dst_int_name}= | Get interface name | ${dut_node} | ${rx_port} -| | ${args}= | catenate -| | ... | --rx_if ${dst_int_name} --tx_if ${src_int_name} -| | ... | --src_mac ${src_mac} | --dst_mac ${dst_mac} -| | ... | --src_ip ${src_ip} -| | Run Traffic Script On Node | send_rs_check_ra.py -| | ... | ${tg_node} | ${args} - -| Send ARP Request -| | [Documentation] | Send ARP Request and check if the ARP Response is received. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)<->(if1)DUT -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - tx_port - Interface from which the ARP packet is sent (TG-if1). -| | ... | Type: string -| | ... | - src_mac - Source MAC address of ARP packet (TG-if1). -| | ... | Type: string -| | ... | - tgt_mac - Target MAC address which is expected in the response -| | ... | (DUT-if1). Type: string -| | ... | - src_ip - Source IP address of ARP packet (TG-if1). -| | ... | Type: string -| | ... | - tgt_ip - Target IP address of ARP packet (DUT-if1). -| | ... | Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Send ARP Request \| ${nodes['TG']} \| eth3 \ -| | ... | \| 08:00:27:cc:4f:54 \| 08:00:27:c9:6a:d5 \ -| | ... | \| 10.0.0.100 \| 192.168.1.5 \| -| | ... -| | [Arguments] | ${tg_node} | ${tx_port} -| | ... | ${src_mac} | ${tgt_mac} -| | ... | ${src_ip} | ${tgt_ip} -| | ${args}= | Catenate | --tx_if | ${tx_port} -| | ... | --src_mac | ${src_mac} | --dst_mac | ${tgt_mac} -| | ... | --src_ip | ${src_ip} | --dst_ip | ${tgt_ip} -| | Run Traffic Script On Node | arp_request.py | ${tg_node} | ${args} - -| ARP request should fail -| | [Documentation] | Send ARP Request and -| | ... | the ARP Response should not be received. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)<->(if1)DUT -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - tx_port - Interface from which the ARP packet is sent (TG-if1). -| | ... | Type: string -| | ... | - src_mac - Source MAC address of ARP packet (TG-if1). -| | ... | Type: string -| | ... | - tgt_mac - Target MAC address which is expected in the response -| | ... | (DUT-if1). Type: string -| | ... | - src_ip - Source IP address of ARP packet (TG-if1). -| | ... | Type: string -| | ... | - tgt_ip - Target IP address of ARP packet (DUT-if1). -| | ... | Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| ARP request should fail \| ${nodes['TG']} \| eth3 \ -| | ... | \| 08:00:27:cc:4f:54 \| 08:00:27:c9:6a:d5 \ -| | ... | \| 10.0.0.100 \| 192.168.1.5 \| -| | ... -| | [Arguments] | ${tg_node} | ${tx_port} -| | ... | ${src_mac} | ${tgt_mac} -| | ... | ${src_ip} | ${tgt_ip} -| | ${args}= | Catenate | --tx_if | ${tx_port} -| | ... | --src_mac | ${src_mac} | --dst_mac | ${tgt_mac} -| | ... | --src_ip | ${src_ip} | --dst_ip | ${tgt_ip} -| | Run Keyword And Expect Error | ARP reply timeout -| | ... | Run Traffic Script On Node | arp_request.py | ${tg_node} | ${args} - -| Send packets and verify multipath routing -| | [Documentation] | Send 100 IP ICMP packets traffic and check if it is\ -| | ... | divided into two paths. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_port - Interface of TG-if1. Type: string -| | ... | - dst_port - Interface of TG-if2. Type: string -| | ... | - src_ip - IP of source interface (TG-if1). Type: string -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string -| | ... | - tx_src_mac - MAC address of TG-if1. Type: string -| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string -| | ... | - rx_src_mac - MAC address of DUT-if2. Type: string -| | ... | - rx_dst_mac_1 - MAC address of interface for path 1. Type: string -| | ... | - rx_dst_mac_2 - MAC address of interface for path 2. Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Send Packet And Check Multipath Routing \| ${nodes['TG']} \ -| | ... | \| eth2 \| eth3 \| 16.0.0.1 \| 32.0.0.1 \ -| | ... | \| 08:00:27:cc:4f:54 \| 08:00:27:c9:6a:d5 \| 08:00:27:54:59:f9 \ -| | ... | \| 02:00:00:00:00:02 \| 02:00:00:00:00:03 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_port} | ${dst_port} | ${src_ip} | ${dst_ip} -| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_src_mac} -| | ... | ${rx_dst_mac_1} | ${rx_dst_mac_2} -| | ${src_port_name}= | Get interface name | ${tg_node} | ${src_port} -| | ${dst_port_name}= | Get interface name | ${tg_node} | ${dst_port} -| | ${args}= | Catenate | --tx_if | ${src_port_name} -| | ... | --rx_if | ${dst_port_name} | --src_ip | ${src_ip} -| | ... | --dst_ip | ${dst_ip} | --tg_if1_mac | ${tx_src_mac} -| | ... | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac | ${rx_src_mac} -| | ... | --path_1_mac | ${rx_dst_mac_1} | --path_2_mac | ${rx_dst_mac_2} -| | Run Traffic Script On Node | send_icmp_check_multipath.py | ${tg_node} -| | ... | ${args} -- cgit 1.2.3-korg