From 3e8a10ce9f0481d610aafa41f3195b0900122eb4 Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Tue, 11 Sep 2018 14:12:54 +0200 Subject: Add dot1q-ip4base-[ndrpdr|mrr] perf tests for 2-node topology Jira: CSIT-1278 Change-Id: I3cc929222d7fd58f38e33917e84675e9c0b55bbd Signed-off-by: Jan Gelety --- resources/libraries/robot/l2/tagging.robot | 33 ++- .../performance/performance_configuration.robot | 320 +++++++++++++-------- 2 files changed, 224 insertions(+), 129 deletions(-) (limited to 'resources/libraries/robot') diff --git a/resources/libraries/robot/l2/tagging.robot b/resources/libraries/robot/l2/tagging.robot index 7731ed193e..aa10c1032c 100644 --- a/resources/libraries/robot/l2/tagging.robot +++ b/resources/libraries/robot/l2/tagging.robot @@ -59,8 +59,9 @@ | | Set Test Variable | ${subif_name_2} | | Set Test Variable | ${subif_index_2} -| Initialize VLAN dot1q sub-interfaces in 3-node circular topology -| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID} +| Initialize VLAN dot1q sub-interfaces in circular topology +| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2}=${None} | ${INT2}=${None} +| | ... | ${SUB_ID}=10 | | [Documentation] | *Create two dot1q subinterfaces on DUTs.* | | ... | | ... | *Arguments:* @@ -78,26 +79,31 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize VLAN dot1q sub-interfaces in 3-node circular topology \ +| | ... | \| Initialize VLAN dot1q sub-interfaces in circular topology \ | | ... | \| ${nodes['DUT1']} \| ${dut1_if2} \| ${nodes['DUT2']} \ | | ... | \| ${dut1_if2} \| 10 \| | | ... | | ${INT1_NAME}= | Get interface name | ${DUT1} | ${INT1} -| | ${INT2_NAME}= | Get interface name | ${DUT2} | ${INT2} +| | ${INT2_NAME}= | Run Keyword Unless | ${DUT2} == ${None} +| | ... | Get interface name | ${DUT2} | ${INT2} | | ${subif_name_1} | ${subif_index_1}= | Create Vlan Subinterface -| | | ... | ${DUT1} | ${INT1_NAME} | ${SUB_ID} -| | ${subif_name_2} | ${subif_index_2}= | Create Vlan Subinterface -| | | ... | ${DUT2} | ${INT2_NAME} | ${SUB_ID} +| | ... | ${DUT1} | ${INT1_NAME} | ${SUB_ID} +| | ${subif_name_2} | ${subif_index_2}= +| | ... | Run Keyword Unless | ${DUT2} == ${None} +| | ... | Create Vlan Subinterface | ${DUT2} | ${INT2_NAME} | ${SUB_ID} | | Set Interface State | ${DUT1} | ${subif_index_1} | up -| | Set Interface State | ${DUT2} | ${subif_index_2} | up +| | Run Keyword Unless | ${DUT2} == ${None} +| | ... | Set Interface State | ${DUT2} | ${subif_index_2} | up | | Set Test Variable | ${subif_name_1} | | Set Test Variable | ${subif_index_1} -| | Set Test Variable | ${subif_name_2} -| | Set Test Variable | ${subif_index_2} +| | Run Keyword Unless | ${DUT2} == ${None} +| | ... | Set Test Variable | ${subif_name_2} +| | Run Keyword Unless | ${DUT2} == ${None} +| | ... | Set Test Variable | ${subif_index_2} | Configure L2 tag rewrite method on interfaces -| | [Arguments] | ${DUT1} | ${SUB_INT1} | ${DUT2} | ${SUB_INT2} -| | ... | ${TAG_REWRITE_METHOD} +| | [Arguments] | ${DUT1} | ${SUB_INT1} | ${DUT2}=${None} | ${SUB_INT2}=${None} +| | ... | ${TAG_REWRITE_METHOD}=${None} | | [Documentation] | *Setup tag rewrite on sub-interfaces on DUTs.* | | ... | | ... | *Arguments:* @@ -108,7 +114,8 @@ | | ... | - TAG_REWRITE_METHOD - Method of tag rewrite. | | ... | | L2 Vlan tag rewrite | ${DUT1} | ${SUB_INT1} | ${TAG_REWRITE_METHOD} -| | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD} +| | Run Keyword Unless | ${DUT2} == ${None} +| | ... | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD} | Connect interfaces and VLAN sub-interfaces using L2XC | | [Arguments] | ${DUT1} | ${INT1} | ${SUB_INT1} diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 9a94c093dd..543e76e56d 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -231,7 +231,7 @@ | | ... | DUT nodes in 2-node / 3-node circular topology | | ... | | ... | *Arguments:* -| | ... | - ${count} - IP route count. Type: integer +| | ... | - count - IP route count. Type: integer | | ... | | ... | *Return:* | | ... | - No value returned @@ -268,9 +268,11 @@ | | Add arp on dut | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 +| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 +| | ... | 30 | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 +| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 +| | ... | 30 | | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30 | | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | 1.1.1.1 | ${dut1_if1} | | ... | count=${count} @@ -287,7 +289,7 @@ | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on | | ... | VPP node. Set UP state of all VPP interfaces in path. Create -| | ... | ${vm_count}+1 FIB tables on DUT with multipath routing. Assign each +| | ... | vm_count+1 FIB tables on DUT with multipath routing. Assign each | | ... | Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with prefix @@ -389,7 +391,7 @@ | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all | | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create -| | ... | ${vm_count}+1 FIB tables on each DUT with multipath routing. Assign +| | ... | vm_count+1 FIB tables on each DUT with multipath routing. Assign | | ... | each Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links and /30 prefix on DUT1-DUT2 link. Set routing on all DUT @@ -401,8 +403,8 @@ | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /tmp/sock-\${VM_ID}-1 +| | ... | - /tmp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... @@ -544,6 +546,92 @@ | | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 | | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2} +| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. In case of 3-node topology create VLAN +| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN +| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses +| | ... | and setup ARPs. Setup IPv4 addresses with /30 prefix on DUT-TG links +| | ... | and set routing with prefix /30. In case of 3-node set IPv4 adresses +| | ... | with /30 prefix on VLAN and set routing on both DUT nodes with prefix +| | ... | /30. Set next hop of neighbour DUT interface IPv4 address. All +| | ... | interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - tg_if1_net - TG interface 1 IP subnet used by traffic generator. +| | ... | Type: integer +| | ... | - tg_if2_net - TG interface 2 IP subnet used by traffic generator. +| | ... | Type: integer +| | ... | - subid - ID of the sub-interface to be created. Type: string +| | ... | - tag_rewrite - Method of tag rewrite. Type: string +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 forwarding with VLAN dot1q sub-interfaces\ +| | ... | in circular topology \| 10.10.10.0 \| 20.20.20.0 \| 10 \| pop-1 \| +| | ... +| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... +| | Set interfaces in path up +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology +| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} +| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | ELSE | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} +| | ... +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add arp on dut | ${dut1} | ${subif_index_1} | 2.2.2.2 +| | ... | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add arp on dut | ${dut2} | ${subif_index_2} | 2.2.2.1 +| | ... | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${subif_index_1} +| | Add arp on dut | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut1} | ${subif_index_1} +| | ... | 2.2.2.1 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut2} | ${subif_index_2} +| | ... | 2.2.2.2 | 30 +| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30 +| | Vpp Route Add | ${dut1} | ${tg_if1_net} | 30 | 1.1.1.1 | ${dut1_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | 30 | 2.2.2.2 +| | ... | ${subif_index_1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | 30 | 2.2.2.1 +| | ... | ${subif_index_2} +| | Vpp Route Add | ${dut} | ${tg_if2_net} | 30 | 3.3.3.1 | ${dut_if2} + | Initialize IPv4 policer 2r3c-${t} in circular topology | | [Documentation] | | ... | Setup of 2r3c color-aware or color-blind policer with dst ip match @@ -633,7 +721,7 @@ | | ... | DUT nodes in 2-node / 3-node circular topology | | ... | | ... | *Arguments:* -| | ... | - ${count} - IP route count. Type: integer +| | ... | - count - IP route count. Type: integer | | ... | | ... | *Return:* | | ... | - No value returned @@ -797,7 +885,7 @@ | | ... | routes on both DUT nodes. | | ... | | ... | *Note:* -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | KW uses test variable rxq_count_int set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} @@ -961,8 +1049,8 @@ | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /tmp/sock-\${VM_ID}-1 +| | ... | - /tmp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... @@ -1025,7 +1113,7 @@ | | [Arguments] | ${sock1} | ${sock2} | ${subid} | ${tag_rewrite} | | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} @@ -1066,7 +1154,7 @@ | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1140,7 +1228,7 @@ | | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1198,21 +1286,21 @@ | | ... | \| GigabitEthernet0/8/0 \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${src_ip_start} - Source IP address start. Type: string -| | ... | - ${dst_ip_start} - Destination IP address start. Type: string -| | ... | - ${ip_step} - IP address step. Type: string -| | ... | - ${sport_start} - Source port number start. Type: string -| | ... | - ${dport_start} - Destination port number start. Type: string -| | ... | - ${port_step} - Port number step. Type: string -| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured. +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - dst_ip_start - Destination IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - sport_start - Source port number start. Type: string +| | ... | - dport_start - Destination port number start. Type: string +| | ... | - port_step - Port number step. Type: string +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. | | ... | Type: integer -| | ... | - ${acl_apply_type} - To what path apply the ACL - input or output. +| | ... | - acl_apply_type - To what path apply the ACL - input or output. | | ... | Type: string -| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. | | ... | Type: string -| | ... | - ${trex_stream1_subnet} - IP subnet used by T-Rex in direction 0->1. +| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1. | | ... | Type: string -| | ... | - ${trex_stream2_subnet} - IP subnet used by T-Rex in direction 1->0. +| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0. | | ... | Type: string | | ... | | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} @@ -1293,12 +1381,12 @@ | | ... | circular topology \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} @@ -1324,17 +1412,17 @@ | | ... | in 3-node circular topology \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${tg} - TG node. -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${tg_if1} - TG interface 1 towards DUT1. -| | ... | - ${tg_if2} - TG interface 2 towards DUT2 (3-node topo) or DUT1 +| | ... | - tg - TG node. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - tg_if1 - TG interface 1 towards DUT1. +| | ... | - tg_if2 - TG interface 2 towards DUT2 (3-node topo) or DUT1 | | ... | (2-node topo). -| | ... | - ${dut1_if1} - DUT1 interface 1 towards TG. -| | ... | - ${dut1_if2} - DUT1 interface 2 towards DUT2 (3-node topo) or TG +| | ... | - dut1_if1 - DUT1 interface 1 towards TG. +| | ... | - dut1_if2 - DUT1 interface 2 towards DUT2 (3-node topo) or TG | | ... | (2-node topo). -| | ... | - ${dut2_if1} - DUT2 interface 1 towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface 2 towards TG. +| | ... | - dut2_if1 - DUT2 interface 1 towards DUT1. +| | ... | - dut2_if2 - DUT2 interface 2 towards TG. | | ... | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error | | ... | Variable Should Exist | ${dut2} @@ -1395,26 +1483,26 @@ | | ... | \| GigabitEthernet0/8/0 \| | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${src_ip_start} - Source IP address start. Type: string -| | ... | - ${ip_step} - IP address step. Type: string -| | ... | - ${src_mac_start} - Source MAC address start in format with colons. +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - src_mac_start - Source MAC address start in format with colons. | | ... | Type: string -| | ... | - ${src_mac_step} - Source MAC address step. Type: string -| | ... | - ${src_mac_mask} - Source MAC address mask. 00:00:00:00:00:00 is a +| | ... | - src_mac_step - Source MAC address step. Type: string +| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a | | ... | wildcard mask. Type: string -| | ... | - ${no_hit_aces_number} - Number of not-hitting ACEs to be configured. +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. | | ... | Type: integer -| | ... | - ${acl_action} - Action for the rule - deny, permit, permit+reflect. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. | | ... | Type: string -| | ... | - ${tg_stream1_subnet} - IP subnet used by TG in direction 0->1. +| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1. | | ... | Type: string -| | ... | - ${tg_stream2_subnet} - IP subnet used by TG in direction 1->0. +| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0. | | ... | Type: string -| | ... | - ${tg_stream1_mac} - Source MAC address of traffic stream 1. +| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1. | | ... | Type: string -| | ... | - ${tg_stream2_mac} - Source MAC address of traffic stream 2. +| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2. | | ... | Type: string -| | ... | - ${tg_mac_mask} - MAC address mask for traffic streams. +| | ... | - tg_mac_mask - MAC address mask for traffic streams. | | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string | | ... | | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} @@ -1485,15 +1573,15 @@ | | ... | circular topology \| | | ... | | ... | _NOTE 1:_ This KW uses following test case variables: -| | ... | - ${tg} - TG node. -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${tg_if1} - TG interface towards DUT1. -| | ... | - ${tg_if2} - TG interface towards DUT2. -| | ... | - ${dut1_if1} - DUT1 interface towards TG. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. -| | ... | - ${dut2_if2} - DUT2 interface towards TG. +| | ... | - tg - TG node. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - tg_if1 - TG interface towards DUT1. +| | ... | - tg_if2 - TG interface towards DUT2. +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. | | ... | | Set interfaces in path up | | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} @@ -1513,8 +1601,8 @@ | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /tmp/sock-\${VM_ID}-1 +| | ... | - /tmp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... @@ -1714,10 +1802,10 @@ | | ... | - tag_rewrite - Method of tag rewrite. Type: string | | ... | | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - ${dut1} - DUT1 node. -| | ... | - ${dut2} - DUT2 node. -| | ... | - ${dut1_if2} - DUT1 interface towards DUT2. -| | ... | - ${dut2_if1} - DUT2 interface towards DUT1. +| | ... | - dut1 - DUT1 node. +| | ... | - dut2 - DUT2 node. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2_if1 - DUT2 interface towards DUT1. | | ... | | ... | *Example:* | | ... @@ -1727,7 +1815,7 @@ | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} | | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} @@ -1762,7 +1850,7 @@ | | ... | ${tag_rewrite} | | ... | | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} @@ -1812,7 +1900,7 @@ | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -1893,7 +1981,7 @@ | | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | Initialize VLAN dot1q sub-interfaces in circular topology | | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} | | ... | ${subid} | | Configure L2 tag rewrite method on interfaces @@ -2097,7 +2185,7 @@ | Configure guest VMs with dpdk-testpmd connected via vhost-user on node | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd for defined number of VMs on all defined\ | | ... | VPP nodes. | | ... @@ -2130,7 +2218,7 @@ | Configure guest VMs with dpdk-testpmd connected via vhost-user | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd defined number of VMs on all defined VPP\ | | ... | nodes. | | ... @@ -2245,7 +2333,7 @@ | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ | | ... | defined number of VMs on all defined VPP nodes. | | ... @@ -2283,7 +2371,7 @@ | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user | | [Documentation] -| | ... | Start ${vm_count} QEMU guests with two vhost-user interfaces and\ +| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ | | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ | | ... | defined number of VMs on all defined VPP nodes. | | ... @@ -2374,11 +2462,11 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${duts_prefix} - ip prefix. Type: int +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2415,8 +2503,8 @@ | | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. | | ... | | ... | *Arguments:* -| | ... | -${encr_alg} - Encryption algorithm. Type: string -| | ... | -${auth_alg} - Authentication algorithm. Type: string +| | ... | - encr_alg - Encryption algorithm. Type: string +| | ... | - auth_alg - Authentication algorithm. Type: string | | ... | | ... | *Return:* | | ... | - No value returned @@ -2450,11 +2538,11 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | -${dut1_dut2_address} - Ip address from DUT1 to DUT2. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${dut2_dut1_address} - Ip address from DUT2 to DUT1. Type: string -| | ... | -${dut1_tg_address} - Ip address from DUT1 to tg. Type: string -| | ... | -${duts_prefix} - ip prefix. Type: int +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2493,14 +2581,14 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | - ${dut1_dut2_ip6_address} - IPv6 address from DUT1 to DUT2. +| | ... | - dut1_dut2_ip6_address - IPv6 address from DUT1 to DUT2. | | ... | Type: string -| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | - ${dut2_dut1_ip6_address} - IPv6 address from DUT2 to DUT1. +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip6_address - IPv6 address from DUT2 to DUT1. | | ... | Type: string -| | ... | - ${dut1_tg_ip4_address} - IPv4 address from DUT1 to tg. Type: string -| | ... | - ${prefix4} - IPv4 prefix. Type: int -| | ... | - ${prefix6} - IPv6 prefix. Type: int +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2541,14 +2629,14 @@ | | ... | Don`t set route. | | ... | | ... | *Arguments:* -| | ... | - ${dut1_dut2_ip4_address} - IPv4 address from DUT1 to DUT2. +| | ... | - dut1_dut2_ip4_address - IPv4 address from DUT1 to DUT2. | | ... | Type: string -| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | - ${dut2_dut1_ip4_address} - IPv4 address from DUT2 to DUT1. +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip4_address - IPv4 address from DUT2 to DUT1. | | ... | Type: string -| | ... | - ${dut1_tg_ip6_address} - IPv6 address from DUT1 to tg. Type: string -| | ... | - ${prefix4} - IPv4 prefix. Type: int -| | ... | - ${prefix6} - IPv6 prefix. Type: int +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int | | ... | | ... | *Return:* | | ... | - No value returned @@ -2645,14 +2733,14 @@ | | ... | a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_VNF\${number}-\${sid} | | ... -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | KW uses test variable \${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... | | ... | *Example:* @@ -2683,7 +2771,7 @@ | | ... | interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Example:* | | ... @@ -2704,12 +2792,12 @@ | | ... | to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_VNF\${number}-\${sid} | | ... | | ... | *Example:* | | ... @@ -2741,7 +2829,7 @@ | | ... | virtual interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Example:* | | ... @@ -2763,12 +2851,12 @@ | | ... | to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${dut} - DUT node. Type: dictionary -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - dut - DUT node. Type: dictionary +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-${dut}_VNF${number}-${sid} +| | ... | - /tmp/memif-\${dut}_VNF\${number}-\${sid} | | ... | | ... | *Example:* | | ... @@ -2884,7 +2972,7 @@ | | ... | virtual interface to create a chain accross DUT node. | | ... | | ... | *Arguments:* -| | ... | - ${count} - Number of memif pairs (containers). Type: integer +| | ... | - count - Number of memif pairs (containers). Type: integer | | ... | | ... | *Example:* | | ... @@ -2904,11 +2992,11 @@ | | ... | connect Memif interface with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${number} - Memif ID. Type: integer +| | ... | - number - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-DUT1_VNF\${number}-\${sid} | | ... | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs @@ -2936,11 +3024,11 @@ | | ... | interface to separate L2 bridge domain with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${number} - Memif ID. Type: integer +| | ... | - number - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... | - /tmp/memif-DUT1_VNF\${number}-\${sid} | | ... | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads | | ... | and rxqueues to all DUTs -- cgit 1.2.3-korg