From c38cb34d13ba01386cbcc6302dce854506eda8a0 Mon Sep 17 00:00:00 2001 From: selias Date: Thu, 13 Jul 2017 13:15:41 +0200 Subject: CSIT-611: HC Test: Lisp suite updates + LispGPE - added LispGPE test suite - added IPv6 tests to Lisp suite - added traffic tests to Lisp suite Change-Id: I3b699149cd73ebf5856072d3f26e98a370dbfc4b Signed-off-by: selias --- resources/libraries/robot/honeycomb/lisp.robot | 201 ++++++++++------ resources/libraries/robot/honeycomb/lisp_gpe.robot | 252 +++++++++++++++++++++ resources/libraries/robot/overlay/l2lisp.robot | 2 +- resources/libraries/robot/overlay/lisp_api.robot | 2 +- .../robot/overlay/lisp_static_adjacency.robot | 5 +- 5 files changed, 383 insertions(+), 79 deletions(-) create mode 100644 resources/libraries/robot/honeycomb/lisp_gpe.robot (limited to 'resources/libraries/robot') diff --git a/resources/libraries/robot/honeycomb/lisp.robot b/resources/libraries/robot/honeycomb/lisp.robot index cda8d827ba..5decf6b6e8 100644 --- a/resources/libraries/robot/honeycomb/lisp.robot +++ b/resources/libraries/robot/honeycomb/lisp.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -18,7 +18,7 @@ *** Keywords *** | Honeycomb enables LISP -| | [Documentation] | Uses Honeycomb API to enable Lisp. +| | [Documentation] | Uses Honeycomb API to enable LISP. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -29,10 +29,10 @@ | | ... | | [Arguments] | ${node} | | ... -| | Set Lisp state | ${node} | ${TRUE} +| | Set LISP state | ${node} | ${TRUE} | Honeycomb disables LISP -| | [Documentation] | Uses Honeycomb API to disable Lisp. +| | [Documentation] | Uses Honeycomb API to disable LISP. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -43,10 +43,10 @@ | | ... | | [Arguments] | ${node} | | ... -| | Set Lisp state | ${node} | ${FALSE} +| | Set LISP state | ${node} | ${FALSE} | Honeycomb adds locator set -| | [Documentation] | Uses Honeycomb API to enable Lisp. +| | [Documentation] | Uses Honeycomb API to enable LISP. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -62,20 +62,20 @@ | | ... | | Add locator | ${node} | ${interface} | ${locator_set} -| Honeycomb adds Lisp Mapping -| | [Documentation] | Uses Honeycomb API to configure a Lisp mapping. +| Honeycomb adds LISP Mapping +| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - data - Lisp settings to use. Type: dictionary +| | ... | - data - LISP settings to use. Type: dictionary | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds Lisp Mapping \| ${nodes['DUT1']} \| ${data} \| +| | ... | \| Honeycomb adds LISP Mapping \| ${nodes['DUT1']} \| ${data} \| | | ... | | [Arguments] | ${node} | ${data} | | ... -| | Configure Lisp Mapping | ${node} | ${data} +| | Configure LISP Mapping | ${node} | ${data} | Honeycomb removes all LISP mappings | | [Documentation] | Uses Honeycomb API to clear the eid-table. @@ -89,10 +89,10 @@ | | ... | | [Arguments] | ${node} | | ... -| | Configure lisp mapping | ${node} | ${NONE} +| | Configure LISP mapping | ${node} | ${NONE} | LISP should not be configured -| | [Documentation] | Retrieves Lisp configuration from Honeycomb operational\ +| | [Documentation] | Retrieves LISP configuration from Honeycomb operational\ | | ... | data, and expects an empty dictionary. | | ... | | ... | *Arguments:* @@ -105,15 +105,15 @@ | | [Arguments] | ${node} | | ... | | Run keyword and Expect Error | KeyError: 'lisp-feature-data' -| | ... | Get Lisp operational data | ${node} +| | ... | Get LISP operational data | ${node} | LISP state from Honeycomb should be -| | [Documentation] | Retrieves Lisp state from Honeycomb operational\ -| | ... | data, and compares Lisp state with expected value. +| | [Documentation] | Retrieves LISP state from Honeycomb operational\ +| | ... | data, and compares LISP state with expected value. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - state - Expected Lisp state. Type: string +| | ... | - state - Expected LISP state. Type: string | | ... | | ... | *Example:* | | ... @@ -121,7 +121,7 @@ | | ... | \| enabled \| | | ... | | [Arguments] | ${node} | ${state} -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ... | | Run keyword if | $state == 'enabled' | | ... | Should be equal as strings @@ -131,12 +131,12 @@ | | ... | ${data['lisp-state']['enable']} | ${False} | LISP state from VAT should be -| | [Documentation] | Retrieves Lisp state from VAT,\ -| | ... | and compares Lisp state with expected value. +| | [Documentation] | Retrieves LISP state from VAT,\ +| | ... | and compares LISP state with expected value. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - state - Expected Lisp state. Type: string +| | ... | - state - Expected LISP state. Type: string | | ... | | ... | *Example:* | | ... @@ -144,16 +144,16 @@ | | ... | | [Arguments] | ${node} | ${state} | | ... -| | ${status}= | VPP show Lisp State | ${node} +| | ${status}= | VPP show LISP State | ${node} | | Should match | ${status['feature_status']} | ${state} | LISP mapping from Honeycomb should be -| | [Documentation] | Retrieves Lisp mapping from Honeycomb operational\ +| | [Documentation] | Retrieves LISP mapping from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - settings - Expected Lisp mapping data. Type: dictionary +| | ... | - settings - Expected LISP mapping data. Type: dictionary | | ... | | ... | *Example:* | | ... @@ -162,18 +162,18 @@ | | ... | | [Arguments] | ${node} | ${settings} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['eid-table']['vni-table'][0]} | | Compare data structures | ${data} | ${settings} | LISP mapping from VAT should be -| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | [Documentation] | Retrieves LISP mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - settings - Expected Lisp mapping data. Type: dictionary +| | ... | - settings - Expected LISP mapping data. Type: dictionary | | ... | | ... | *Example:* | | ... @@ -182,11 +182,11 @@ | | ... | | [Arguments] | ${node} | ${settings} | | ... -| | ${data}= | VPP show Lisp eid table | ${node} +| | ${data}= | VPP show LISP eid table | ${node} | | Compare data structures | ${data[0]} | ${settings} | LISP mappings from Honeycomb should not exist -| | [Documentation] | Retrieves Lisp mappings from operational\ +| | [Documentation] | Retrieves LISP mappings from operational\ | | ... | data, and expects to find none. | | ... | | ... | *Arguments:* @@ -199,12 +199,12 @@ | | ... | | [Arguments] | ${node} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | Should be empty | ${data['eid-table']['vni-table']} | LISP mappings from VAT should not exist -| | [Documentation] | Retrieves Lisp mappings from VAT,\ +| | [Documentation] | Retrieves LISP mappings from VAT,\ | | ... | and expects to receive an empty list. | | ... | | ... | *Arguments:* @@ -216,11 +216,11 @@ | | ... | | [Arguments] | ${node} | | ... -| | ${data}= | VPP show Lisp eid table | ${node} +| | ${data}= | VPP show LISP eid table | ${node} | | Should be empty | ${data} | Locator set from Honeycomb should be -| | [Documentation] | Retrieves Lisp locator set from Honeycomb operational\ +| | [Documentation] | Retrieves LISP locator set from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* @@ -236,7 +236,7 @@ | | ... | | [Arguments] | ${node} | ${interface} | ${locator_set} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${loc_data}= | Set Variable | | ... | ${data['lisp-state']['lisp-feature-data']['locator-sets']} | | Should be equal @@ -247,14 +247,14 @@ | | ... | ${interface} | Honeycomb adds LISP adjacency -| | [Documentation] | Uses Honeycomb API to configure Lisp adjacency. +| | [Documentation] | Uses Honeycomb API to configure LISP adjacency. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - vni - Virtual network identifier number. Type: integer | | ... | - map - Name of an existing remote mapping. Type: string | | ... | - adjacency - Name for the new adjacency. Type: string -| | ... | - data - Lisp adjacency settings to use. Type: dictionary +| | ... | - data - LISP adjacency settings to use. Type: dictionary | | ... | | ... | *Example:* | | ... @@ -263,11 +263,11 @@ | | ... | | [Arguments] | ${node} | ${vni} | ${map} | ${adjacency} | ${data} | | ... -| | Add Lisp adjacency +| | Add LISP adjacency | | ... | ${node} | ${vni} | ${map} | ${adjacency} | ${data} | Honeycomb adds LISP map resolver -| | [Documentation] | Uses Honeycomb API to configure Lisp map resolver. +| | [Documentation] | Uses Honeycomb API to configure LISP map resolver. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -282,8 +282,8 @@ | | ... | | Add map resolver | ${node} | ${ip_address} -| Honeycomb adds Lisp Map register -| | [Documentation] | Uses Honeycomb API to configure Lisp map register. +| Honeycomb adds LISP Map register +| | [Documentation] | Uses Honeycomb API to configure LISP map register. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -291,15 +291,15 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds Lisp Map register \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb adds LISP Map register \| ${nodes['DUT1']} \ | | ... | \| ${True} \| | | ... | | [Arguments] | ${node} | ${add_map_register} | | ... | | Set Map Register | ${node} | ${add_map_register} -| Honeycomb sets Lisp Map request Mode -| | [Documentation] | Uses Honeycomb API to configure Lisp map request mode. +| Honeycomb sets LISP Map request Mode +| | [Documentation] | Uses Honeycomb API to configure LISP map request mode. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -307,7 +307,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds Lisp Map Request Mode \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb adds LISP Map Request Mode \| ${nodes['DUT1']} \ | | ... | \| ${True} \| | | ... | | [Arguments] | ${node} | ${set_map_request} @@ -315,7 +315,7 @@ | | Set Map Request Mode | ${node} | ${set_map_request} | Map resolver from Honeycomb should be -| | [Documentation] | Retrieves Lisp map resolver from Honeycomb operational\ +| | [Documentation] | Retrieves LISP map resolver from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* @@ -330,13 +330,13 @@ | | ... | | [Arguments] | ${node} | ${ip_address} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['map-resolvers']['map-resolver'][0]} | | Should be equal | ${data['ip-address']} | ${ip_address} | Map resolver from VAT should be -| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | [Documentation] | Retrieves LISP mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* @@ -351,11 +351,11 @@ | | ... | | [Arguments] | ${node} | ${ip_address} | | ... -| | ${data}= | Vpp show Lisp map resolver | ${node} +| | ${data}= | Vpp show LISP map resolver | ${node} | | Should be equal | ${data[0]['map resolver']} | ${ip_address} -| Honeycomb adds Lisp Map Server -| | [Documentation] | Uses Honeycomb API to configure Lisp Map Server. +| Honeycomb adds LISP Map Server +| | [Documentation] | Uses Honeycomb API to configure LISP Map Server. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -364,7 +364,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds Lisp Map Server \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb adds LISP Map Server \| ${nodes['DUT1']} \ | | ... | \| 192.168.0.2 \| 192.168.0.3 \| | | ... | | [Arguments] | ${node} | @{ip_addresses} @@ -372,7 +372,7 @@ | | Add Map Server | ${node} | @{ip_addresses} | Map Register from Honeycomb should be -| | [Documentation] | Retrieves Lisp Map Register from Honeycomb operational\ +| | [Documentation] | Retrieves LISP Map Register from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* @@ -386,13 +386,13 @@ | | ... | | [Arguments] | ${node} | ${state} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['map-register']} | | Should be equal | ${data['enabled']} | ${state} | Map Server from Honeycomb should be -| | [Documentation] | Retrieves Lisp Map Server from Honeycomb operational\ +| | [Documentation] | Retrieves LISP Map Server from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* @@ -407,12 +407,12 @@ | | ... | | [Arguments] | ${node} | @{ip_addresses} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | Verify Map Server Data from Honeycomb | ${data} | ${ip_addresses} | Map Server from VAT should be -| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | [Documentation] | Retrieves LISP mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* @@ -427,11 +427,11 @@ | | ... | | [Arguments] | ${node} | @{ip_addresses} | | ... -| | ${data}= | Vpp show Lisp Map Server | ${node} +| | ${data}= | Vpp show LISP Map Server | ${node} | | Verify Map Server Data from VAT | ${data} | ${ip_addresses} | Map Register from VAT should be -| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | [Documentation] | Retrieves LISP mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* @@ -445,11 +445,11 @@ | | ... | | [Arguments] | ${node} | ${state} | | ... -| | ${data}= | Vpp show Lisp Map Register | ${node} +| | ${data}= | Vpp show LISP Map Register | ${node} | | Should be equal | ${data['state']} | ${state} | Map Request Mode from VAT should be -| | [Documentation] | Retrieves Lisp Request Mode from VAT,\ +| | [Documentation] | Retrieves LISP Request Mode from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* @@ -464,11 +464,11 @@ | | ... | | [Arguments] | ${node} | ${destination} | | ... -| | ${data}= | Vpp show Lisp Map Request Mode | ${node} +| | ${data}= | Vpp show LISP Map Request Mode | ${node} | | Should be equal | ${data['map_request_mode']} | ${destination} | Honeycomb enables LISP PITR feature -| | [Documentation] | Uses Honeycomb API to configure Lisp PITR feature. +| | [Documentation] | Uses Honeycomb API to configure LISP PITR feature. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -483,7 +483,7 @@ | | Configure PITR | ${node} | ${locator_set} | Honeycomb enables LISP PETR feature -| | [Documentation] | Uses Honeycomb API to configure Lisp PETR feature. +| | [Documentation] | Uses Honeycomb API to configure LISP PETR feature. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -499,7 +499,7 @@ | | Configure PETR | ${node} | ${ip_address} | Honeycomb enables LISP RLOC feature -| | [Documentation] | Uses Honeycomb API to enable the Lisp RLOC feature. +| | [Documentation] | Uses Honeycomb API to enable the LISP RLOC feature. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -529,7 +529,7 @@ | | ... | | [Arguments] | ${node} | ${locator_set} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['pitr-cfg']} | | Should be equal | ${data['locator-set']} | ${locator_set} @@ -549,7 +549,7 @@ | | ... | | [Arguments] | ${node} | ${ip_address} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['petr-cfg']['petr-address']} | | Should be equal | ${data} | ${ip_address} @@ -569,7 +569,7 @@ | | ... | | [Arguments] | ${node} | ${destination} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['map-request-mode']['mode']} | | Should be equal | ${data} | ${destination} @@ -589,13 +589,13 @@ | | ... | | [Arguments] | ${node} | ${state} | | ... -| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Get LISP operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['rloc-probe']['enabled']} | | Should be equal | ${data} | ${state} | PETR configuration from VAT should be -| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | [Documentation] | Retrieves LISP mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* @@ -610,11 +610,11 @@ | | ... | | [Arguments] | ${node} | ${state} | | ... -| | ${data}= | Vpp show Lisp PETR config | ${node} +| | ${data}= | Vpp show LISP PETR config | ${node} | | Should be equal | ${data['status']} | ${state} | RLOC probing from VAT should be -| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | [Documentation] | Retrieves LISP mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* @@ -629,7 +629,7 @@ | | ... | | [Arguments] | ${node} | ${state} | | ... -| | ${data}= | Vpp show Lisp RLOC config | ${node} +| | ${data}= | Vpp show LISP RLOC config | ${node} | | Should be equal | ${data['state']} | ${state} | PITR config from VAT should be @@ -648,12 +648,12 @@ | | ... | | [Arguments] | ${node} | ${locator_set} | | ... -| | ${data}= | VPP show Lisp PITR | ${node} +| | ${data}= | VPP show LISP PITR | ${node} | | Should be equal | ${data['status']} | enabled | | Should be equal | ${data['locator_set']} | ${locator_set} | Honeycomb disables all LISP features -| | [Documentation] | Uses Honeycomb API to remove all Lisp configuration. +| | [Documentation] | Uses Honeycomb API to remove all LISP configuration. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary @@ -664,4 +664,55 @@ | | ... | | [Arguments] | ${node} | | ... -| | Disable Lisp | ${node} \ No newline at end of file +| | Disable LISP | ${node} + +| Send packet and verify LISP encap +| | [Documentation] | Send ICMP packet to DUT out one interface and receive\ +| | ... | a LISP encapsulated packet on the other interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: string +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string +| | ... | - tx_src_port - Interface of TG-if1. Type: string +| | ... | - tx_src_mac - MAC address of TG-if1. Type: string +| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string +| | ... | - rx_port - Interface of TG-if1. Type: string +| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string +| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string +| | ... | - src_rloc - configured RLOC source address. Type: string +| | ... | - dst_rloc - configured RLOC destination address. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ +| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ +| | ... | \| 10.0.1.2 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} +| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} +| | ... +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} +| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc} +| | Run Traffic Script On Node | lisp/lisp_check.py | ${tg_node} +| | ... | ${args} + +| LISP Functional Traffic Test Teardown +| | [Documentation] | Teardown for LISP functional traffic test. +| | Show Packet Trace on all DUTs | ${nodes} +| | VPP Show LISP EID Table | ${node} +| | Disable LISP | ${node} diff --git a/resources/libraries/robot/honeycomb/lisp_gpe.robot b/resources/libraries/robot/honeycomb/lisp_gpe.robot new file mode 100644 index 0000000000..2b265c83c6 --- /dev/null +++ b/resources/libraries/robot/honeycomb/lisp_gpe.robot @@ -0,0 +1,252 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.honeycomb.Lisp.LispGPEKeywords +| Library | resources.libraries.python.LispUtil +| Documentation | Keywords used to test Honeycomb Lisp GPE features. + +*** Keywords *** +| Honeycomb enables LISP GPE +| | [Documentation] | Uses Honeycomb API to enable LISP GPE. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb enables LISP GPE \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | Set LISPGPE state | ${node} | ${TRUE} + +| Honeycomb disables LISP GPE +| | [Documentation] | Uses Honeycomb API to disable LISP GPE. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb disables LISP GPE \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | Set LISPGPE state | ${node} | ${FALSE} + +| Honeycomb adds first LISP GPE Mapping +| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. Removes +| | ... | any existing mappings. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - data - LISP settings to use. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds first LISP GPE Mapping \| ${nodes['DUT1']} \ +| | ... | \| ${data} \| +| | ... +| | [Arguments] | ${node} | ${data} +| | ... +| | Configure LISPGPE Mapping | ${node} | ${data} + +| Honeycomb adds LISP GPE Mapping +| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - data - LISP settings to use. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds LISP GPE Mapping \| ${nodes['DUT1']} \| ${data} \| +| | ... +| | [Arguments] | ${node} | ${data} +| | ... +| | Add LISPGPE Mapping | ${node} | ${data['id']} | ${data} + +| Honeycomb removes LISP GPE mapping +| | [Documentation] | Uses Honeycomb API to remove the specified mapping. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb removes LISP GPE mapping \| ${nodes['DUT1']} \ +| | ... | \| map_name \| +| | ... +| | [Arguments] | ${node} | ${mapping} +| | ... +| | Delete LISPGPE mapping | ${node} | ${mapping} + +| LISP GPE should not be configured +| | [Documentation] | Retrieves LISP GPE configuration from Honeycomb operational\ +| | ... | data, and expects an empty dictionary. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE should not be configured \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | ${data}= | Get LISP GPE operational data | ${node} +| | Should be Equal +| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${FALSE} + +| LISP GPE state from Honeycomb should be +| | [Documentation] | Retrieves LISP GPE state from Honeycomb operational\ +| | ... | data, and compares LISP state with expected value. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - state - Expected LISP state. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE state from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| enabled \| +| | ... +| | [Arguments] | ${node} | ${state} +| | ... +| | ${data}= | Get LISPGPE operational data | ${node} +| | Run keyword if | $state == 'enabled' +| | ... | Should be equal as strings +| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${True} +| | Run keyword if | $state == 'disabled' +| | ... | Should be equal as strings +| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${False} + +| LISP GPE state from VAT should be +| | [Documentation] | Retrieves LISP state from VAT,\ +| | ... | and compares LISP state with expected value. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - state - Expected LISP state. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP state from VAT should be \| ${nodes['DUT1']} \| enabled \| +| | ... +| | [Arguments] | ${node} | ${state} +| | ... +| | ${status}= | VPP show LISP State | ${node} +| | Should match | ${status['gpe_status']} | ${state} + +| LISP GPE mapping from Honeycomb should be +| | [Documentation] | Retrieves LISP GPE mapping from Honeycomb operational\ +| | ... | data, and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - settings - Expected LISP mapping data. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE mapping from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| ${settings} \| +| | ... +| | [Arguments] | ${node} | ${settings} +| | ... +| | ${data}= | Get LISPGPE mapping | ${node} | ${settings['id']} +| | Compare data structures | ${data} | ${settings} + +| LISP GPE mappings from Honeycomb should not exist +| | [Documentation] | Retrieves LISP GPE mappings from operational\ +| | ... | data, and expects to find none. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE mappings from Honeycomb should not exist \ +| | ... | \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | ${data}= | Get LISPGPE operational data | ${node} +| | Variable Should Not Exist +| | ... | ${data['gpe-state']['gpe-feature-data']['gpe-entry']} + +| Honeycomb disables all LISP GPE features +| | [Documentation] | Uses Honeycomb API to remove all LISP GPE configuration. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb disables all LISP GPE features \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | Disable LISPGPE | ${node} + +| Send packet and verify LISP GPE encap +| | [Documentation] | Send ICMP packet to DUT out one interface and receive\ +| | ... | a LISP-GPE encapsulated packet on the other interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: string +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string +| | ... | - tx_src_port - Interface of TG-if1. Type: string +| | ... | - tx_src_mac - MAC address of TG-if1. Type: string +| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string +| | ... | - rx_port - Interface of TG-if1. Type: string +| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string +| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string +| | ... | - src_rloc - configured RLOC source address. Type: string +| | ... | - dst_rloc - configured RLOC destination address. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \ +| | ... | \| 10.0.0.1 \| 32.0.0.1 \| +| | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ +| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \ +| | ... | \| 10.0.1.1 \| 10.0.1.2 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} +| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} +| | ... +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} +| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc} +| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node} +| | ... | ${args} + +| LISPGPE Functional Traffic Test Teardown +| | [Documentation] | Teardown for LISP GPE functional traffic test. +| | Show Packet Trace on all DUTs | ${nodes} +| | VPP Show LISP EID Table | ${node} +| | Disable LISPGPE | ${node} diff --git a/resources/libraries/robot/overlay/l2lisp.robot b/resources/libraries/robot/overlay/l2lisp.robot index 5dcfcc5971..3a2eafa7a5 100644 --- a/resources/libraries/robot/overlay/l2lisp.robot +++ b/resources/libraries/robot/overlay/l2lisp.robot @@ -36,7 +36,7 @@ | | ... | - No value returned | | ... | | ... | *Example:* -| | ... | \| Configure LISP GPE topology in 3-node circular topology \| ${dut_node} \| ${adjacency} \ +| | ... | \| Configure L2 LISP on DUT \| ${dut_node} \| ${adjacency} \ | | ... | \| ${settings} \| | | ... | | [Arguments] diff --git a/resources/libraries/robot/overlay/lisp_api.robot b/resources/libraries/robot/overlay/lisp_api.robot index 1485a405a6..b858ef48a7 100644 --- a/resources/libraries/robot/overlay/lisp_api.robot +++ b/resources/libraries/robot/overlay/lisp_api.robot @@ -82,7 +82,7 @@ | | ... | KW locator_set data is prepared, which are expected from VPP via VAT. | | ... | | ... | *Example:* -| | ... | \| Then LISP locator_set shpuld be configured correctly \ +| | ... | \| Then LISP locator_set should be configured correctly \ | | ... | \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${dut_node} diff --git a/resources/libraries/robot/overlay/lisp_static_adjacency.robot b/resources/libraries/robot/overlay/lisp_static_adjacency.robot index f20fd51eb4..389b1bfb40 100644 --- a/resources/libraries/robot/overlay/lisp_static_adjacency.robot +++ b/resources/libraries/robot/overlay/lisp_static_adjacency.robot @@ -42,8 +42,9 @@ | | ... | - No value returned | | ... | | ... | *Example:* -| | ... | \| Configure LISP topology in 3-node circular topology \| ${dut1_node} \| ${interface_name} \ -| | ... | \| None \| ${dut2_node} \| ${interface_name} \| None \ +| | ... | \| Configure LISP topology in 3-node circular topology \ +| | ... | \| ${dut1_node} \| ${interface_name} \| None \ +| | ... | \| ${dut2_node} \| ${interface_name} \| None \ | | ... | \| ${locator_set} \| ${dut1_eid} \| ${dut2_eid} \ | | ... | \| ${dut1_static_adjacency} \| ${dut2_static_adjacency} \| | | ... -- cgit 1.2.3-korg