From a3d14e7cf128c5188a4e064042a64333ae64d191 Mon Sep 17 00:00:00 2001 From: Vratko Polak Date: Thu, 10 May 2018 19:27:30 +0200 Subject: CSIT-992: Give MDR parameters official names Change-Id: I1da9a64fb06e015f2b2a0aacb46a53d70349b4b6 Signed-off-by: Vratko Polak --- resources/libraries/python/TrafficGenerator.py | 28 ++-- .../python/search/AbstractSearchAlgorithm.py | 6 +- .../python/search/OptimizedSearchAlgorithm.py | 162 +++++++++++---------- .../python/search/ReceiveRateMeasurement.py | 22 +-- .../robot/performance/performance_utils.robot | 31 ++-- 5 files changed, 131 insertions(+), 118 deletions(-) (limited to 'resources/libraries') diff --git a/resources/libraries/python/TrafficGenerator.py b/resources/libraries/python/TrafficGenerator.py index e7c8c4829a..bf6383e52a 100644 --- a/resources/libraries/python/TrafficGenerator.py +++ b/resources/libraries/python/TrafficGenerator.py @@ -597,9 +597,9 @@ class TrafficGenerator(AbstractRateProvider): duration, unit_rate, self.frame_size, self.traffic_type, self.warmup_time, latency=True) transmit_count = int(self.get_sent()) - drop_count = int(self.get_loss()) + loss_count = int(self.get_loss()) measurement = ReceiveRateMeasurement( - duration, transmit_rate, transmit_count, drop_count) + duration, transmit_rate, transmit_count, loss_count) measurement.latency = self.get_latency_int() return measurement @@ -609,18 +609,20 @@ class OptimizedSearch(object): @staticmethod def perform_optimized_ndrpdr_search( - frame_size, traffic_type, fail_rate, line_rate, - allowed_drop_fraction=0.005, final_relative_width=0.005, - final_trial_duration=30.0, initial_trial_duration=1.0, - intermediate_phases=2, timeout=600.0): + frame_size, traffic_type, minimum_transmit_rate, + maximum_transmit_rate, packet_loss_ratio=0.005, + final_relative_width=0.005, final_trial_duration=30.0, + initial_trial_duration=1.0, intermediate_phases=2, timeout=600.0): """Setup initialized TG, perform optimized search, return intervals. :param frame_size: Frame size identifier or value [B]. :param traffic_type: Module name as a traffic type identifier. See resources/traffic_profiles/trex for implemented modules. - :param fail_rate: Minimal target transmit rate [pps]. - :param line_rate: Maximal target transmit rate [pps]. - :param allowed_drop_fraction: Fraction of dropped packets for PDR [1]. + :param minimum_transmit_rate: Minimal bidirectional + target transmit rate [pps]. + :param maximum_transmit_rate: Maximal bidirectional + target transmit rate [pps]. + :param packet_loss_ratio: Fraction of packets lost, for PDR [1]. :param final_relative_width: Final lower bound transmit rate cannot be more distant that this multiple of upper bound [1]. :param final_trial_duration: Trial duration for the final phase [s]. @@ -632,9 +634,9 @@ class OptimizedSearch(object): before this overall time [s]. :type frame_size: str or int :type traffic_type: str - :type fail_rate: float - :type line_rate: float - :type allowed_drop_fraction: float + :type minimum_transmit_rate: float + :type maximum_transmit_rate: float + :type packet_loss_ratio: float :type final_relative_width: float :type final_trial_duration: float :type initial_trial_duration: float @@ -656,5 +658,5 @@ class OptimizedSearch(object): intermediate_phases=intermediate_phases, initial_trial_duration=initial_trial_duration, timeout=timeout) result = algorithm.narrow_down_ndr_and_pdr( - fail_rate, line_rate, allowed_drop_fraction) + minimum_transmit_rate, maximum_transmit_rate, packet_loss_ratio) return result diff --git a/resources/libraries/python/search/AbstractSearchAlgorithm.py b/resources/libraries/python/search/AbstractSearchAlgorithm.py index ae326bd4ca..08f3a6bebc 100644 --- a/resources/libraries/python/search/AbstractSearchAlgorithm.py +++ b/resources/libraries/python/search/AbstractSearchAlgorithm.py @@ -32,15 +32,15 @@ class AbstractSearchAlgorithm(object): @abstractmethod def narrow_down_ndr_and_pdr( - self, fail_rate, line_rate, allowed_drop_fraction): + self, fail_rate, line_rate, packet_loss_ratio): """Perform measurements to narrow down intervals, return them. :param fail_rate: Minimal target transmit rate [pps]. :param line_rate: Maximal target transmit rate [pps]. - :param allowed_drop_fraction: Fraction of dropped packets for PDR [1]. + :param packet_loss_ratio: Fraction of packets lost, for PDR [1]. :type fail_rate: float :type line_rate: float - :type allowed_drop_fraction: float + :type packet_loss_ratio: float :returns: Structure containing narrowed down intervals and their measurements. :rtype: NdrPdrResult diff --git a/resources/libraries/python/search/OptimizedSearchAlgorithm.py b/resources/libraries/python/search/OptimizedSearchAlgorithm.py index 43559e049b..0d3eacc937 100644 --- a/resources/libraries/python/search/OptimizedSearchAlgorithm.py +++ b/resources/libraries/python/search/OptimizedSearchAlgorithm.py @@ -78,8 +78,9 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): class ProgressState(object): """Structure containing data to be passed around in recursion.""" - def __init__(self, result, phases, duration, width_goal, - allowed_drop_fraction, fail_rate, line_rate): + def __init__( + self, result, phases, duration, width_goal, packet_loss_ratio, + minimum_transmit_rate, maximum_transmit_rate): """Convert and store the argument values. :param result: Current measured NDR and PDR intervals. @@ -87,30 +88,30 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): before the current one. :param duration: Trial duration to use in the current phase [s]. :param width_goal: The goal relative width for the curreent phase. - :param allowed_drop_fraction: PDR fraction for the current search. - :param fail_rate: Minimum target transmit rate + :param packet_loss_ratio: PDR fraction for the current search. + :param minimum_transmit_rate: Minimum target transmit rate for the current search [pps]. - :param line_rate: Maximum target transmit rate + :param maximum_transmit_rate: Maximum target transmit rate for the current search [pps]. :type result: NdrPdrResult :type phases: int :type duration: float :type width_goal: float - :type allowed_drop_fraction: float - :type fail_rate: float - :type line_rate: float + :type packet_loss_ratio: float + :type minimum_transmit_rate: float + :type maximum_transmit_rate: float """ self.result = result self.phases = int(phases) self.duration = float(duration) self.width_goal = float(width_goal) - self.allowed_drop_fraction = float(allowed_drop_fraction) - self.fail_rate = float(fail_rate) - self.line_rate = float(line_rate) + self.packet_loss_ratio = float(packet_loss_ratio) + self.minimum_transmit_rate = float(minimum_transmit_rate) + self.maximum_transmit_rate = float(maximum_transmit_rate) def __init__(self, rate_provider, final_relative_width=0.005, final_trial_duration=30.0, initial_trial_duration=1.0, - intermediate_phases=2, timeout=600.0): + number_of_intermediate_phases=2, timeout=600.0): """Store rate provider and additional arguments. :param rate_provider: Rate provider to use by this search object. @@ -119,56 +120,60 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): :param final_trial_duration: Trial duration for the final phase [s]. :param initial_trial_duration: Trial duration for the initial phase and also for the first intermediate phase [s]. - :param intermediate_phases: Number of intermediate phases to perform - before the final phase [1]. + :param number_of_intermediate_phases: Number of intermediate phases + to perform before the final phase [1]. :param timeout: The search will fail itself when not finished before this overall time [s]. :type rate_provider: AbstractRateProvider :type final_relative_width: float :type final_trial_duration: float :type initial_trial_duration: int - :type intermediate_phases: int + :type number_of_intermediate_phases: int :type timeout: float """ super(OptimizedSearchAlgorithm, self).__init__(rate_provider) self.final_trial_duration = float(final_trial_duration) self.final_relative_width = float(final_relative_width) - self.intermediate_phases = int(intermediate_phases) + self.number_of_intermediate_phases = int(number_of_intermediate_phases) self.initial_trial_duration = float(initial_trial_duration) self.timeout = float(timeout) def narrow_down_ndr_and_pdr( - self, fail_rate, line_rate, allowed_drop_fraction): + self, minimum_transmit_rate, maximum_transmit_rate, + packet_loss_ratio): """Perform initial phase, create state object, proceed with next phases. - :param fail_rate: Minimal target transmit rate [pps]. - :param line_rate: Maximal target transmit rate [pps]. - :param allowed_drop_fraction: Fraction of dropped packets for PDR [1]. - :type fail_rate: float - :type line_rate: float - :type allowed_drop_fraction: float + :param minimum_transmit_rate: Minimal target transmit rate [pps]. + :param maximum_transmit_rate: Maximal target transmit rate [pps]. + :param packet_loss_ratio: Fraction of packets lost, for PDR [1]. + :type minimum_transmit_rate: float + :type maximum_transmit_rate: float + :type packet_loss_ratio: float :returns: Structure containing narrowed down intervals and their measurements. :rtype: NdrPdrResult :raises RuntimeError: If total duration is larger than timeout. """ - fail_rate = float(fail_rate) - line_rate = float(line_rate) - allowed_drop_fraction = float(allowed_drop_fraction) + minimum_transmit_rate = float(minimum_transmit_rate) + maximum_transmit_rate = float(maximum_transmit_rate) + packet_loss_ratio = float(packet_loss_ratio) line_measurement = self.rate_provider.measure( - self.initial_trial_duration, line_rate) + self.initial_trial_duration, maximum_transmit_rate) # 0.999 is to avoid rounding errors which make # the subsequent logic think the width is too broad. max_lo = max( - fail_rate, line_rate * (1.0 - 0.999 * self.final_relative_width)) - mrr = min(max_lo, max(fail_rate, line_measurement.receive_rate)) + minimum_transmit_rate, + maximum_transmit_rate * (1.0 - 0.999 * self.final_relative_width)) + mrr = min( + max_lo, max(minimum_transmit_rate, line_measurement.receive_rate)) mrr_measurement = self.rate_provider.measure( self.initial_trial_duration, mrr) # Attempt to get narrower width. max2_lo = max( - fail_rate, mrr * (1.0 - 0.999 * self.final_relative_width)) + minimum_transmit_rate, + mrr * (1.0 - 0.999 * self.final_relative_width)) mrr2 = min(max2_lo, mrr_measurement.receive_rate) - if mrr2 > fail_rate: + if mrr2 > minimum_transmit_rate: line_measurement = mrr_measurement mrr_measurement = self.rate_provider.measure( self.initial_trial_duration, mrr2) @@ -176,9 +181,9 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): mrr_measurement, line_measurement) starting_result = NdrPdrResult(starting_interval, starting_interval) state = self.ProgressState( - starting_result, self.intermediate_phases, + starting_result, self.number_of_intermediate_phases, self.final_trial_duration, self.final_relative_width, - allowed_drop_fraction, fail_rate, line_rate) + packet_loss_ratio, minimum_transmit_rate, maximum_transmit_rate) state = self.ndrpdr(state) return state.result @@ -202,20 +207,20 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): ndr_interval = self._new_interval( state.result.ndr_interval, measurement, 0.0) pdr_interval = self._new_interval( - state.result.pdr_interval, measurement, state.allowed_drop_fraction) + state.result.pdr_interval, measurement, state.packet_loss_ratio) state.result = NdrPdrResult(ndr_interval, pdr_interval) return state @staticmethod - def _new_interval(old_interval, measurement, allowed_drop_fraction): + def _new_interval(old_interval, measurement, packet_loss_ratio): """Return new interval with bounds updated according to the measurement. :param old_interval: The current interval before the measurement. :param measurement: The new meaqsurement to take into account. - :param allowed_drop_fraction: Fraction for PDR (or zero for NDR). + :param packet_loss_ratio: Fraction for PDR (or zero for NDR). :type old_interval: ReceiveRateInterval :type measurement: ReceiveRateMeasurement - :type allowed_drop_fraction: float + :type packet_loss_ratio: float :returns: The updated interval. :rtype: ReceiveRateInterval """ @@ -227,7 +232,7 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): else: return ReceiveRateInterval(old_lo, measurement) # Priority one: invalid lower bound allows only one type of update. - if old_lo.drop_fraction > allowed_drop_fraction: + if old_lo.loss_fraction > packet_loss_ratio: # We can only expand down, old bound becomes valid upper one. if measurement.target_tr < old_lo.target_tr: return ReceiveRateInterval(measurement, old_lo) @@ -237,20 +242,20 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): # Next priorities depend on target Tr. if measurement.target_tr < old_lo.target_tr: # Lower external measurement, relevant only - # if the new measurement has high drop rate. - if measurement.drop_fraction > allowed_drop_fraction: + # if the new measurement has high loss rate. + if measurement.loss_fraction > packet_loss_ratio: # Returning the broader interval as old_lo # would be invalid upper bound. return ReceiveRateInterval(measurement, old_hi) elif measurement.target_tr > old_hi.target_tr: # Upper external measurement, only relevant for invalid upper bound. - if old_hi.drop_fraction <= allowed_drop_fraction: + if old_hi.loss_fraction <= packet_loss_ratio: # Old upper bound becomes valid new lower bound. return ReceiveRateInterval(old_hi, measurement) else: # Internal measurement, replaced boundary - # depends on measured drop fraction. - if measurement.drop_fraction > allowed_drop_fraction: + # depends on measured loss fraction. + if measurement.loss_fraction > packet_loss_ratio: # We have found a narrow valid interval, # regardless of whether old upper bound was valid. return ReceiveRateInterval(old_lo, measurement) @@ -258,7 +263,7 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): # In ideal world, we would not want to shrink interval # if upper bound is not valid. # In the real world, we want to shrink it for - # "invalid upper bound at line rate" case. + # "invalid upper bound at maximal rate" case. return ReceiveRateInterval(measurement, old_hi) # Fallback, the interval is unchanged by the measurement. return old_interval @@ -378,66 +383,71 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): state.width_goal, state.result.ndr_interval.rel_tr_width) pdr_rel_width = max( state.width_goal, state.result.pdr_interval.rel_tr_width) - # If we are hitting line or fail rate, we cannot shift, + # If we are hitting maximal or minimal rate, we cannot shift, # but we can re-measure. - if ndr_lo.drop_fraction > 0.0: - if ndr_lo.target_tr > state.fail_rate: - new_tr = max(state.fail_rate, self.double_step_down( - ndr_rel_width, ndr_lo.target_tr)) + if ndr_lo.loss_fraction > 0.0: + if ndr_lo.target_tr > state.minimum_transmit_rate: + new_tr = max( + state.minimum_transmit_rate, + self.double_step_down(ndr_rel_width, ndr_lo.target_tr)) logging.info("ndr lo external %s", new_tr) state = self._measure_and_update_state(state, new_tr) continue elif ndr_lo.duration < state.duration: - logging.info("ndr lo fail re-measure") + logging.info("ndr lo minimal re-measure") state = self._measure_and_update_state( - state, state.fail_rate) + state, state.minimum_transmit_rate) continue - if pdr_lo.drop_fraction > state.allowed_drop_fraction: - if pdr_lo.target_tr > state.fail_rate: - new_tr = max(state.fail_rate, self.double_step_down( - pdr_rel_width, pdr_lo.target_tr)) + if pdr_lo.loss_fraction > state.packet_loss_ratio: + if pdr_lo.target_tr > state.minimum_transmit_rate: + new_tr = max( + state.minimum_transmit_rate, + self.double_step_down(pdr_rel_width, pdr_lo.target_tr)) logging.info("pdr lo external %s", new_tr) state = self._measure_and_update_state(state, new_tr) continue elif pdr_lo.duration < state.duration: - logging.info("pdr lo fail re-measure") + logging.info("pdr lo minimal re-measure") state = self._measure_and_update_state( - state, state.fail_rate) + state, state.minimum_transmit_rate) continue - if ndr_hi.drop_fraction <= 0.0: - if ndr_hi.target_tr < state.line_rate: - new_tr = min(state.line_rate, self.double_step_up( - ndr_rel_width, ndr_hi.target_tr)) + if ndr_hi.loss_fraction <= 0.0: + if ndr_hi.target_tr < state.maximum_transmit_rate: + new_tr = min( + state.maximum_transmit_rate, + self.double_step_up(ndr_rel_width, ndr_hi.target_tr)) logging.info("ndr hi external %s", new_tr) state = self._measure_and_update_state(state, new_tr) continue elif ndr_hi.duration < state.duration: - logging.info("ndr hi line re-measure") + logging.info("ndr hi maximal re-measure") state = self._measure_and_update_state( - state, state.line_rate) + state, state.maximum_transmit_rate) continue - if pdr_hi.drop_fraction <= state.allowed_drop_fraction: - if pdr_hi.target_tr < state.line_rate: - new_tr = min(state.line_rate, self.double_step_up( - pdr_rel_width, pdr_hi.target_tr)) + if pdr_hi.loss_fraction <= state.packet_loss_ratio: + if pdr_hi.target_tr < state.maximum_transmit_rate: + new_tr = min( + state.maximum_transmit_rate, + self.double_step_up(pdr_rel_width, pdr_hi.target_tr)) logging.info("pdr hi external %s", new_tr) state = self._measure_and_update_state(state, new_tr) continue elif pdr_hi.duration < state.duration: - logging.info("ndr hi line re-measure") + logging.info("ndr hi maximal re-measure") state = self._measure_and_update_state( - state, state.line_rate) + state, state.maximum_transmit_rate) continue - # If we are hitting line_rate, it is still worth narrowing width, + # If we are hitting maximum_transmit_rate, + # it is still worth narrowing width, # hoping large enough Df will happen. - # But if we are hitting fail rate (at current duration), + # But if we are hitting the minimal rate (at current duration), # no additional measurement will help with that, # so we can stop narrowing in this phase. - if (ndr_lo.target_tr <= state.fail_rate - and ndr_lo.drop_fraction > 0.0): + if (ndr_lo.target_tr <= state.minimum_transmit_rate + and ndr_lo.loss_fraction > 0.0): ndr_rel_width = 0.0 - if (pdr_lo.target_tr <= state.fail_rate - and pdr_lo.drop_fraction > state.allowed_drop_fraction): + if (pdr_lo.target_tr <= state.minimum_transmit_rate + and pdr_lo.loss_fraction > state.packet_loss_ratio): pdr_rel_width = 0.0 if max(ndr_rel_width, pdr_rel_width) > state.width_goal: # We have to narrow some width. @@ -473,7 +483,7 @@ class OptimizedSearchAlgorithm(AbstractSearchAlgorithm): logging.info("re-measuring PDR upper bound") self._measure_and_update_state(state, pdr_hi.target_tr) continue - # Widths are narrow (or failing), bound measurements + # Widths are narrow (or lower bound minimal), bound measurements # are long enough, we can return. logging.info("phase done") break diff --git a/resources/libraries/python/search/ReceiveRateMeasurement.py b/resources/libraries/python/search/ReceiveRateMeasurement.py index 58aa819017..d052ebd3bf 100644 --- a/resources/libraries/python/search/ReceiveRateMeasurement.py +++ b/resources/libraries/python/search/ReceiveRateMeasurement.py @@ -17,38 +17,38 @@ class ReceiveRateMeasurement(object): """Structure defining the result of single Rr measurement.""" - def __init__(self, duration, target_tr, transmit_count, drop_count): + def __init__(self, duration, target_tr, transmit_count, loss_count): """Constructor, normalize primary and compute secondary quantities. :param duration: Measurement duration [s]. :param target_tr: Target transmit rate [pps]. If bidirectional traffic is measured, this is bidirectional rate. :param transmit_count: Number of packets transmitted [1]. - :param drop_count: Number of packets transmitted but not received [1]. + :param loss_count: Number of packets transmitted but not received [1]. :type duration: float :type target_tr: float :type transmit_count: int - :type drop_count: int + :type loss_count: int """ self.duration = float(duration) self.target_tr = float(target_tr) self.transmit_count = int(transmit_count) - self.drop_count = int(drop_count) - self.receive_count = transmit_count - drop_count + self.loss_count = int(loss_count) + self.receive_count = transmit_count - loss_count self.transmit_rate = transmit_count / self.duration - self.drop_rate = drop_count / self.duration + self.loss_rate = loss_count / self.duration self.receive_rate = self.receive_count / self.duration - self.drop_fraction = float(self.drop_count) / self.transmit_count + self.loss_fraction = float(self.loss_count) / self.transmit_count # TODO: Do we want to store also the real time (duration + overhead)? def __str__(self): - """Return string reporting input and drop fraction.""" + """Return string reporting input and loss fraction.""" return "d={dur!s},Tr={rate!s},Df={frac!s}".format( - dur=self.duration, rate=self.target_tr, frac=self.drop_fraction) + dur=self.duration, rate=self.target_tr, frac=self.loss_fraction) def __repr__(self): """Return string evaluable as a constructor call.""" return ("ReceiveRateMeasurement(duration={dur!r},target_tr={rate!r}" - ",transmit_count={trans!r},drop_count={drop!r})".format( + ",transmit_count={trans!r},loss_count={loss!r})".format( dur=self.duration, rate=self.target_tr, - trans=self.transmit_count, drop=self.drop_count)) + trans=self.transmit_count, loss=self.loss_count)) diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index 771e7486cb..1bb989373f 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -368,9 +368,9 @@ | | ... | *Arguments:* | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str | | ... | - topology_type - Topology type. Type: string -| | ... | - fail_rate - Lower limit of search [pps]. Type: float -| | ... | - line_rate - Upper limit of search [pps]. Type: float -| | ... | - allowed_drop_fraction - Accepted loss during search. Type: float +| | ... | - minimum_transmit_rate - Lower limit of search [pps]. Type: float +| | ... | - maximum_transmit_rate - Upper limit of search [pps]. Type: float +| | ... | - packet_drop_ratio - Accepted loss during search. Type: float | | ... | - final_relative_width - Maximal width multiple of upper. Type: float | | ... | - final_trial_duration - Duration of final trials [s]. Type: float | | ... | - initial_trial_duration - Duration of initial trials [s]. Type: float @@ -383,19 +383,20 @@ | | ... | 3-node-IPv4 \| \${100000} \| \${14880952} \| \${0.005} \| \${0.005} \ | | ... | \| \${30.0} \| \${1.0} \| \${2} \| ${600.0} | | ... -| | [Arguments] | ${frame_size} | ${topology_type} | ${fail_rate} | ${line_rate} -| | ... | ${allowed_drop_fraction}=${0.005} | ${final_relative_width}=${0.005} -| | ... | ${final_trial_duration}=${30.0} | ${initial_trial_duration}=${1.0} -| | ... | ${intermediate_phases}=${2} | ${timeout}=${600.0} +| | [Arguments] | ${frame_size} | ${topology_type} | ${minimum_transmit_rate} +| | ... | ${maximum_transmit_rate} | ${packet_loss_ratio}=${0.005} +| | ... | ${final_relative_width}=${0.005} | ${final_trial_duration}=${30.0} +| | ... | ${initial_trial_duration}=${1.0} +| | ... | ${number_of_intermediate_phases}=${2} | ${timeout}=${600.0} | | ... | | ${result}= | Perform optimized ndrpdr search | ${frame_size} -| | ... | ${topology_type} | ${fail_rate} | ${line_rate} -| | ... | ${allowed_drop_fraction} | ${final_relative_width} +| | ... | ${topology_type} | ${minimum_transmit_rate} | ${maximum_transmit_rate} +| | ... | ${packet_loss_ratio} | ${final_relative_width} | | ... | ${final_trial_duration} | ${initial_trial_duration} -| | ... | ${intermediate_phases} | timeout=${timeout} +| | ... | ${number_of_intermediate_phases} | timeout=${timeout} | | Display result of NDRPDR search | ${result} | ${frame_size} | | Check NDRPDR interval validity | ${result.pdr_interval} -| | ... | ${allowed_drop_fraction} +| | ... | ${packet_loss_ratio} | | Check NDRPDR interval validity | ${result.ndr_interval} | | Perform additional measurements based on NDRPDR result | | ... | ${result} | ${frame_size} | ${topology_type} @@ -471,20 +472,20 @@ | | ... | | ... | *Arguments:* | | ... | - interval - Measured interval. Type: ReceiveRateInterval -| | ... | - allowed_drop_fraction - Accepted loss (0.0 for NDR). Type: float +| | ... | - packet_loss_ratio - Accepted loss (0.0 for NDR). Type: float | | ... | | ... | *Example:* | | ... | | ... | \| Check NDRPDR interval validity \| \${result.pdr_interval} \ | | ... | \| \${0.005} | | ... -| | [Arguments] | ${interval} | ${allowed_drop_fraction}=${0.0} +| | [Arguments] | ${interval} | ${packet_loss_ratio}=${0.0} | | ... | | ${lower_bound_df}= | Set Variable | ${interval.measured_low.drop_fraction} -| | Return From Keyword If | ${lower_bound_df} <= ${allowed_drop_fraction} +| | Return From Keyword If | ${lower_bound_df} <= ${packet_loss_ratio} | | ${messagge}= | Catenate | SEPARATOR=${SPACE} | | ... | Lower bound fraction ${lower_bound_df} -| | ... | does not reach ${allowed_drop_fraction}. +| | ... | does not reach ${packet_loss_ratio}. | | Fail | ${message} | Perform additional measurements based on NDRPDR result -- cgit 1.2.3-korg