From 24f7c6a4d22b8d26f0aa86669fc7aadad2108f2f Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 13 Jul 2018 11:44:29 +0000 Subject: Refactor DPDK testcases to new structure + RXQ refactor Change-Id: Ic03a2e208b9fe5d324a5ed75a603af4cff1854a9 Signed-off-by: Peter Mikus --- .../10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot | 140 +------ .../10ge2p1x520-eth-l2xcbase-testpmd-ndrpdr.robot | 122 ++++++ ...ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 410 -------------------- .../10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot | 138 +------ .../10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdr.robot | 121 ++++++ ...ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot | 421 -------------------- .../10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot | 140 +------ .../10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot | 122 ++++++ ...ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 422 -------------------- .../10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot | 119 ++++++ .../10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot | 119 ++++++ .../25ge2p1xxv710-eth-l2xcbase-testpmd-mrr.robot | 124 ++++++ ...25ge2p1xxv710-eth-l2xcbase-testpmd-ndrpdr.robot | 126 ++++++ .../25ge2p1xxv710-ethip4-ip4base-l3fwd-mrr.robot | 123 ++++++ ...25ge2p1xxv710-ethip4-ip4base-l3fwd-ndrpdr.robot | 125 ++++++ .../40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot | 140 +------ .../40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdr.robot | 125 ++++++ ...e2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 424 --------------------- .../40ge2p1xl710-ethip4-ip4base-l3fwd-mrr.robot | 123 ++++++ .../40ge2p1xl710-ethip4-ip4base-l3fwd-ndrpdr.robot | 125 ++++++ tests/dpdk/perf/__init__.robot | 2 - 21 files changed, 1557 insertions(+), 2154 deletions(-) create mode 100644 tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdr.robot delete mode 100644 tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot create mode 100644 tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdr.robot delete mode 100644 tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot create mode 100644 tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot delete mode 100644 tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot create mode 100644 tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot create mode 100644 tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot create mode 100644 tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-mrr.robot create mode 100644 tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-ndrpdr.robot create mode 100644 tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-mrr.robot create mode 100644 tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-ndrpdr.robot create mode 100644 tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdr.robot delete mode 100644 tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot create mode 100644 tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-mrr.robot create mode 100644 tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-ndrpdr.robot (limited to 'tests/dpdk/perf') diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot index ca4faac946..73ffdddf81 100644 --- a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot @@ -26,6 +26,8 @@ | ... | L2 | Intel-X520-DA2 | Suite Teardown | Tear down DPDK 3-node performance topology | ... +| Test template | Local template +| ... | Documentation | *Raw results L2 routing test cases* | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. @@ -37,7 +39,7 @@ | ... | at line rate and reports total received/sent packets over trial period.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ | ... | payload. MAC addresses are matching MAC addresses of the TG node\ | ... | interfaces. @@ -49,170 +51,70 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-testpmd +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} phy core(s),\ -| | ... | ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${jumbo_frames}= | Set Variable If -| | ... | ${get_framesize} < ${1522} | no | yes +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} | | ... -| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdr.robot new file mode 100644 index 0000000000..fcc09f4fe6 --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdr.robot @@ -0,0 +1,122 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA +| ... | NIC_Intel-X520-DA2 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot deleted file mode 100644 index 82365737c7..0000000000 --- a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ /dev/null @@ -1,410 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/dpdk/default.robot -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.DPDK.DPDKTools -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDRDISC | 1NUMA -| ... | NIC_Intel-X520-DA2 | DPDK | ETH | L2XCFWD | BASE -| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X520-DA2 -| Suite Teardown | Tear down DPDK 3-node performance topology -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ -| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using either binary search or linear search\ -| ... | algorithms with configured starting rate and final step that determines\ -| ... | throughput measurement resolution. Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 10GE linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames\ -| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames\ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc04-1518B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames\ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames\ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc06-9000B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames\ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 100kpps,\ -| | ... | LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc10-1518B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 10kpps,\ -| | ... | LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc12-9000B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 10kpps,\ -| | ... | LT=0.5%. -| | ... -| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 4C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc14-64B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 100kpps,\ -| | ... | LT=0.5%. -| | ... -| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc16-1518B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 10kpps,\ -| | ... | LT=0.5%. -| | ... -| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte\ -| | ... | frames using binary search start at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc18-9000B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte -| | ... | frames using binary search start at 10GE linerate, step 5kpps,\ -| | ... | LT=0.5%. -| | ... -| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot index 1c16d9cc66..66757f0b5c 100644 --- a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot @@ -26,6 +26,8 @@ | ... | L3 | Intel-X520-DA2 | Suite Teardown | Tear down DPDK 3-node performance topology | ... +| Test template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. @@ -48,170 +50,70 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd *** Keywords *** -| Check RR for ethip4-ip4base-l3fwd +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with ${wt} phy core(s),\ -| | ... | ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${jumbo_frames}= | Set Variable If -| | ... | ${get_framesize} < ${1522} | no | yes +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} | | ... -| | Given Start L3FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-l3fwd -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdr.robot new file mode 100644 index 0000000000..23a33f1781 --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -0,0 +1,121 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA +| ... | NIC_Intel-X520-DA2 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot deleted file mode 100644 index fe6b5b261e..0000000000 --- a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot +++ /dev/null @@ -1,421 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/dpdk/default.robot -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.DPDK.DPDKTools -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | 1NUMA -| ... | NIC_Intel-X520-DA2 | DPDK | IP4FWD | BASE | ETH -| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | Tear down DPDK 3-node performance topology -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application -| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4dst253_l3fwd - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc02-64B-1t1c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc03-1518B-1t1c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc04-1518B-1t1c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc05-9000B-1t1c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 5kpps. -| | ... -| | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 1 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc06-9000B-1t1c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 5kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 1 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc07-64B-2t2c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc08-64B-2t2c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc09-1518B-2t2c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc10-1518B-2t2c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc11-9000B-2t2c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 5kpps. -| | ... -| | [Tags] | 9000B | 2C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 2 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc12-9000B-2t2c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 5kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 2 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc13-64B-4t4c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 4C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc14-64B-4t4c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc15-1518B-4t4c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc16-1518B-4t4c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc17-9000B-4t4c-ethip4-ip4base-l3fwd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 5kpps. -| | ... -| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 4 | 2 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc18-9000B-4t4c-ethip4-ip4base-l3fwd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\ -| | ... | at 10GE linerate, step 5kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD on all DUTs | 4 | 2 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot index 180c15ceb1..daaa46dde4 100644 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot @@ -26,6 +26,8 @@ | ... | L2 | Intel-X710 | Suite Teardown | Tear down DPDK 3-node performance topology | ... +| Test template | Local template +| ... | Documentation | *Raw results L2 routing test cases* | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. @@ -37,7 +39,7 @@ | ... | at line rate and reports total received/sent packets over trial period.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ | ... | payload. MAC addresses are matching MAC addresses of the TG node\ | ... | interfaces. @@ -49,170 +51,70 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-testpmd +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} phy core(s),\ -| | ... | ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${jumbo_frames}= | Set Variable If -| | ... | ${get_framesize} < ${1522} | no | yes +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} | | ... -| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot new file mode 100644 index 0000000000..ecbe0a33e6 --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot @@ -0,0 +1,122 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA +| ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-X710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p10GE NIC X710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. + +*** Variables *** +# X710 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot deleted file mode 100644 index fb42ee531c..0000000000 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ /dev/null @@ -1,422 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/dpdk/default.robot -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.DPDK.DPDKTools -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDRDISC | 1NUMA -| ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE -| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-X710 -| Suite Teardown | Tear down DPDK 3-node performance topology -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ -| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ -| ... | 2p10GE NIC X710 by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using either binary search or linear search\ -| ... | algorithms with configured starting rate and final step that determines\ -| ... | throughput measurement resolution. Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc04-1518B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc06-9000B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc10-1518B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc12-9000B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 4C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc14-64B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc16-1518B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc18-9000B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 5kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot new file mode 100644 index 0000000000..1835e00148 --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | 1NUMA +| ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p10GE NIC X710 Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot new file mode 100644 index 0000000000..09ec4ee750 --- /dev/null +++ b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA +| ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p10GE NIC X710 Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# X710-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-mrr.robot new file mode 100644 index 0000000000..c06f140c72 --- /dev/null +++ b/tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-mrr.robot @@ -0,0 +1,124 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | MRR | 1NUMA +| ... | NIC_Intel-XXV710 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-XXV710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p25GE NIC XXV710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# XXV10-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-ndrpdr.robot new file mode 100644 index 0000000000..8656a7adbe --- /dev/null +++ b/tests/dpdk/perf/25ge2p1xxv710-eth-l2xcbase-testpmd-ndrpdr.robot @@ -0,0 +1,126 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA +| ... | NIC_Intel-XXV710 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-XXV710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p25GE NIC XXV710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 254 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. + +*** Variables *** +# XXV10-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-mrr.robot new file mode 100644 index 0000000000..2869776f22 --- /dev/null +++ b/tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-mrr.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | 1NUMA +| ... | NIC_Intel-XXV710 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p25GE NIC XXV710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-ndrpdr.robot new file mode 100644 index 0000000000..39334a10a9 --- /dev/null +++ b/tests/dpdk/perf/25ge2p1xxv710-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -0,0 +1,125 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA +| ... | NIC_Intel-XXV710 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-XXV710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p25GE NIC XXV710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. + +*** Variables *** +# XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot index 65e901bbb7..da61f73ae8 100644 --- a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot @@ -26,6 +26,8 @@ | ... | L2 | Intel-XL710 | Suite Teardown | Tear down DPDK 3-node performance topology | ... +| Test template | Local template +| ... | Documentation | *Raw results L2 routing test cases* | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ | ... | with single links between nodes. @@ -37,7 +39,7 @@ | ... | at line rate and reports total received/sent packets over trial period.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | (flow-group per direction, 254 flows per flow-group) with all packets\ | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ | ... | payload. MAC addresses are matching MAC addresses of the TG node\ | ... | interfaces. @@ -51,172 +53,72 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-testpmd +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} phy core(s),\ -| | ... | ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} | | ${max_rate}= | Set Variable If | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ${jumbo_frames}= | Set Variable If -| | ... | ${get_framesize} < ${1522} | no | yes +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} | | ... -| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-testpmd -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdr.robot new file mode 100644 index 0000000000..41119c0d67 --- /dev/null +++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdr.robot @@ -0,0 +1,125 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA +| ... | NIC_Intel-XL710 | DPDK | ETH | L2XCFWD | BASE +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L2 | Intel-XL710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results L2 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ +| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ +| ... | 2p40GE NIC XL710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. + +*** Variables *** +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2 frame forwarding config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-eth-l2xcbase-testpmd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot deleted file mode 100644 index 0916d7d1c1..0000000000 --- a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ /dev/null @@ -1,424 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/dpdk/default.robot -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.DPDK.DPDKTools -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDRDISC | 1NUMA -| ... | NIC_Intel-XL710 | DPDK | ETH | L2XCFWD | BASE -| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model -| ... | L2 | Intel-XL710 -| Suite Teardown | Tear down DPDK 3-node performance topology -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 frame forwarding. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK testpmd\ -| ... | application and use the io forwarding mode. DUT1 and DUT2 tested with\ -| ... | 2p40GE NIC XL710 by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using either binary search or linear search\ -| ... | algorithms with configured starting rate and final step that determines\ -| ... | throughput measurement resolution. Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ -| ... | payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G} | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps} | ${18750000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc04-1518B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc06-9000B-1t1c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 1 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 2C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc10-1518B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc12-9000B-2t2c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 2 | 1 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 100kpps. -| | ... -| | [Tags] | 64B | 4C | NDRDISC -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc14-64B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 100kpps, LT=0.5%. -| | ... -| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc16-1518B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... -| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | no -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 10kpps. -| | ... -| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | yes -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} - -| tc18-9000B-4t4c-eth-l2xcbase-testpmd-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 5kpps, LT=0.5%. -| | ... -| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD on all DUTs | 4 | 2 | yes -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-mrr.robot new file mode 100644 index 0000000000..a04a4433d7 --- /dev/null +++ b/tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-mrr.robot @@ -0,0 +1,123 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | 1NUMA +| ... | NIC_Intel-XL710 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-XL710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. + +*** Variables *** +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | trial throughput test. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-ndrpdr.robot new file mode 100644 index 0000000000..dfb6f629f9 --- /dev/null +++ b/tests/dpdk/perf/40ge2p1xl710-ethip4-ip4base-l3fwd-ndrpdr.robot @@ -0,0 +1,125 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/dpdk/default.robot +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.DPDK.DPDKTools +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA +| ... | NIC_Intel-XL710 | DPDK | IP4FWD | BASE | ETH +| ... +| Suite Setup | Set up DPDK 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-XL710 +| Suite Teardown | Tear down DPDK 3-node performance topology +| ... +| Test template | Local template +| ... +| Documentation | *Raw results IPv4 routing test cases* +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 run the DPDK l3fwd application\ +| ... | DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. + +*** Variables *** +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd + +*** Keywords *** +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L3 IPv4 routing config.\ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm. +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | ${20000} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} +| | ${max_rate}= | Set Variable If +| | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} +| | ${jumbo_frames}= | Set Variable If +| | ... | ${get_framesize} < ${1522} | ${False} | ${True} +| | ... +| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames} +| | Then Find NDR and PDR intervals using optimized search +| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc05-64B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc09-64B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-ndrpdr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/dpdk/perf/__init__.robot b/tests/dpdk/perf/__init__.robot index d818f94e25..36a58717d7 100644 --- a/tests/dpdk/perf/__init__.robot +++ b/tests/dpdk/perf/__init__.robot @@ -33,12 +33,10 @@ | | ... | _NOTE:_ This KW sets following suite variables: | | ... | - perf_pdr_loss_acceptance - Loss acceptance treshold | | ... | - perf_pdr_loss_acceptance_type - Loss acceptance treshold type -| | ... | - perf_vm_image - Guest VM disk image | | ... | - pkt_trace - Switch to enable packet trace for test | | ... | - dut_stats - Switch to enable DUT statistics | | ... | | Set Global Variable | ${perf_pdr_loss_acceptance} | 0.5 | | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage -| | Set Global Variable | ${perf_vm_image} | /var/lib/vm/csit-nested-1.7.img | | Set Global Variable | ${pkt_trace} | ${False} | | Set Global Variable | ${dut_stats} | ${False} -- cgit 1.2.3-korg