From 6a6126b2f26607263e4543a1e0b5012ab2f0601b Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Fri, 6 Jul 2018 19:06:41 +0000 Subject: CSIT-1142 Change thread perf test TAGs Due to automatization of SMT detection this change is suppose to remove static thread/core tags in favor of dynamic one. Leaving the static tags for number of physical cores to be able to select TCs. Change-Id: I7f99f605821f363e45c333f46d1dea786693521b Signed-off-by: Peter Mikus --- .../10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot | 32 +++++----- ...ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 72 +++++++++++----------- .../10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot | 32 +++++----- ...ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot | 72 +++++++++++----------- .../10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot | 32 +++++----- ...ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 72 +++++++++++----------- .../40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot | 32 +++++----- ...e2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 72 +++++++++++----------- 8 files changed, 208 insertions(+), 208 deletions(-) (limited to 'tests/dpdk/perf') diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot index 69d617e764..7f942d1494 100644 --- a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot @@ -72,49 +72,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 1T1C | STHREAD +| | [Tags] | 64B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=1 | rxq=1 | tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD +| | [Tags] | 1518B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=1 | rxq=1 | tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD +| | [Tags] | 9000B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=1 | rxq=1 | tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD +| | [Tags] | IMIX | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=1 | rxq=1 @@ -126,7 +126,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD +| | [Tags] | 64B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=2 | rxq=1 @@ -138,7 +138,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD +| | [Tags] | 1518B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=2 | rxq=1 @@ -150,7 +150,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD +| | [Tags] | 9000B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=2 | rxq=1 @@ -163,7 +163,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD +| | [Tags] | IMIX | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=2 | rxq=1 @@ -175,7 +175,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD +| | [Tags] | 64B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=4 | rxq=2 @@ -187,7 +187,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD +| | [Tags] | 1518B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=4 | rxq=2 @@ -199,7 +199,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD +| | [Tags] | 9000B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=4 | rxq=2 @@ -212,7 +212,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 4T4C | MTHREAD +| | [Tags] | IMIX | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot index 6077585e61..3194976684 100644 --- a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot @@ -54,11 +54,11 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames\ | | ... | using binary search start at 10GE linerate, step 100kpps. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 64B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -73,11 +73,11 @@ | tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames\ | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -93,11 +93,11 @@ | tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames\ | | ... | using binary search start at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 1518B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -112,11 +112,11 @@ | tc04-1518B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames\ | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -132,11 +132,11 @@ | tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames\ | | ... | using binary search start at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 9000B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -151,11 +151,11 @@ | tc06-9000B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames\ | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -171,11 +171,11 @@ | tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte\ | | ... | frames using binary search start at 10GE linerate, step 100kpps. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 64B | 2C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -190,12 +190,12 @@ | tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte\ | | ... | frames using binary search start at 10GE linerate, step 100kpps,\ | | ... | LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -211,11 +211,11 @@ | tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte\ | | ... | frames using binary search start at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -230,12 +230,12 @@ | tc10-1518B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte\ | | ... | frames using binary search start at 10GE linerate, step 10kpps,\ | | ... | LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -251,11 +251,11 @@ | tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte\ | | ... | frames using binary search start at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -270,12 +270,12 @@ | tc12-9000B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte\ | | ... | frames using binary search start at 10GE linerate, step 10kpps,\ | | ... | LT=0.5%. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -291,11 +291,11 @@ | tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte\ | | ... | frames using binary search start at 10GE linerate, step 100kpps. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC +| | [Tags] | 64B | 4C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -310,12 +310,12 @@ | tc14-64B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte\ | | ... | frames using binary search start at 10GE linerate, step 100kpps,\ | | ... | LT=0.5%. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -331,11 +331,11 @@ | tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte\ | | ... | frames using binary search start at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -350,12 +350,12 @@ | tc16-1518B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte\ | | ... | frames using binary search start at 10GE linerate, step 10kpps,\ | | ... | LT=0.5%. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -371,11 +371,11 @@ | tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte\ | | ... | frames using binary search start at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -390,12 +390,12 @@ | tc18-9000B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte | | ... | frames using binary search start at 10GE linerate, step 5kpps,\ | | ... | LT=0.5%. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot index afc39c4820..5cf6a4412a 100644 --- a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot @@ -71,49 +71,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 1T1C | STHREAD +| | [Tags] | 64B | 1C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${64} | wt=1 | rxq=1 | tc02-1518B-1t1c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD +| | [Tags] | 1518B | 1C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${1518} | wt=1 | rxq=1 | tc03-9000B-1t1c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD +| | [Tags] | 9000B | 1C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${9000} | wt=1 | rxq=1 | tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD +| | [Tags] | IMIX | 1C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=IMIX_v4_1 | wt=1 | rxq=1 @@ -125,7 +125,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD +| | [Tags] | 64B | 2C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${64} | wt=2 | rxq=1 @@ -137,7 +137,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD +| | [Tags] | 1518B | 2C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${1518} | wt=2 | rxq=1 @@ -149,7 +149,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD +| | [Tags] | 9000B | 2C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${9000} | wt=2 | rxq=1 @@ -162,7 +162,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD +| | [Tags] | IMIX | 2C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=IMIX_v4_1 | wt=2 | rxq=1 @@ -174,7 +174,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD +| | [Tags] | 64B | 4C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${64} | wt=4 | rxq=2 @@ -186,7 +186,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD +| | [Tags] | 1518B | 4C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${1518} | wt=4 | rxq=2 @@ -198,7 +198,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD +| | [Tags] | 9000B | 4C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=${9000} | wt=4 | rxq=2 @@ -211,7 +211,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 4T4C | MTHREAD +| | [Tags] | IMIX | 4C | | ... | | [Template] | Check RR for ethip4-ip4base-l3fwd | | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot index b31c8a4e39..d72c4233a4 100644 --- a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot @@ -53,12 +53,12 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start\ | | ... | at 10GE linerate, step 100kpps. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 64B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -73,12 +73,12 @@ | tc02-64B-1t1c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start\ | | ... | at 10GE linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -94,12 +94,12 @@ | tc03-1518B-1t1c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\ | | ... | at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 1518B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -114,12 +114,12 @@ | tc04-1518B-1t1c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\ | | ... | at 10GE linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -135,12 +135,12 @@ | tc05-9000B-1t1c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\ | | ... | at 10GE linerate, step 5kpps. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 9000B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -155,12 +155,12 @@ | tc06-9000B-1t1c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\ | | ... | at 10GE linerate, step 5kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -176,12 +176,12 @@ | tc07-64B-2t2c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start\ | | ... | at 10GE linerate, step 100kpps. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 64B | 2C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -196,12 +196,12 @@ | tc08-64B-2t2c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start\ | | ... | at 10GE linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -217,12 +217,12 @@ | tc09-1518B-2t2c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\ | | ... | at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 1518B | 2C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -237,12 +237,12 @@ | tc10-1518B-2t2c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\ | | ... | at 10GE linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -258,12 +258,12 @@ | tc11-9000B-2t2c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\ | | ... | at 10GE linerate, step 5kpps. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 9000B | 2C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -278,12 +278,12 @@ | tc12-9000B-2t2c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads, 2 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 phy cores,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\ | | ... | at 10GE linerate, step 5kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -299,12 +299,12 @@ | tc13-64B-4t4c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start\ | | ... | at 10GE linerate, step 100kpps. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC +| | [Tags] | 64B | 4C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -319,12 +319,12 @@ | tc14-64B-4t4c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start\ | | ... | at 10GE linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -340,12 +340,12 @@ | tc15-1518B-4t4c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start\ | | ... | at 10GE linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -360,12 +360,12 @@ | tc16-1518B-4t4c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start\ | | ... | at 10GE linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -381,12 +381,12 @@ | tc17-9000B-4t4c-ethip4-ip4base-l3fwd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start\ | | ... | at 10GE linerate, step 5kpps. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -401,12 +401,12 @@ | tc18-9000B-4t4c-ethip4-ip4base-l3fwd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads, 4 phy cores,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 phy cores,\ | | ... | 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start\ | | ... | at 10GE linerate, step 5kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot index 14e3fe378e..4adfcca1a0 100644 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot @@ -72,49 +72,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 1T1C | STHREAD +| | [Tags] | 64B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=1 | rxq=1 | tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD +| | [Tags] | 1518B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=1 | rxq=1 | tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD +| | [Tags] | 9000B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=1 | rxq=1 | tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD +| | [Tags] | IMIX | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=1 | rxq=1 @@ -126,7 +126,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD +| | [Tags] | 64B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=2 | rxq=1 @@ -138,7 +138,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD +| | [Tags] | 1518B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=2 | rxq=1 @@ -150,7 +150,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD +| | [Tags] | 9000B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=2 | rxq=1 @@ -163,7 +163,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD +| | [Tags] | IMIX | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=2 | rxq=1 @@ -175,7 +175,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD +| | [Tags] | 64B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=4 | rxq=2 @@ -187,7 +187,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD +| | [Tags] | 1518B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=4 | rxq=2 @@ -199,7 +199,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD +| | [Tags] | 9000B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=4 | rxq=2 @@ -212,7 +212,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 4T4C | MTHREAD +| | [Tags] | IMIX | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot index 290d6568e0..06ec4b62f8 100644 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot @@ -54,12 +54,12 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 64B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -74,12 +74,12 @@ | tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -95,12 +95,12 @@ | tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 1518B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -115,12 +115,12 @@ | tc04-1518B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -136,12 +136,12 @@ | tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 9000B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -156,12 +156,12 @@ | tc06-9000B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -177,12 +177,12 @@ | tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 64B | 2C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -197,12 +197,12 @@ | tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -218,12 +218,12 @@ | tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -238,12 +238,12 @@ | tc10-1518B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -259,12 +259,12 @@ | tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -279,12 +279,12 @@ | tc12-9000B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -300,12 +300,12 @@ | tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC +| | [Tags] | 64B | 4C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -320,12 +320,12 @@ | tc14-64B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -341,12 +341,12 @@ | tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -361,12 +361,12 @@ | tc16-1518B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -382,12 +382,12 @@ | tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -402,12 +402,12 @@ | tc18-9000B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ | | ... | linerate, step 5kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot index d5ad503715..ec7cf1128b 100644 --- a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot @@ -76,49 +76,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 1T1C | STHREAD +| | [Tags] | 64B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=1 | rxq=1 | tc02-1518B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD +| | [Tags] | 1518B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=1 | rxq=1 | tc03-9000B-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD +| | [Tags] | 9000B | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=1 | rxq=1 | tc04-IMIX-1t1c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD +| | [Tags] | IMIX | 1C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=1 | rxq=1 @@ -130,7 +130,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD +| | [Tags] | 64B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=2 | rxq=1 @@ -142,7 +142,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD +| | [Tags] | 1518B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=2 | rxq=1 @@ -154,7 +154,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD +| | [Tags] | 9000B | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=2 | rxq=1 @@ -167,7 +167,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD +| | [Tags] | IMIX | 2C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=2 | rxq=1 @@ -179,7 +179,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD +| | [Tags] | 64B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${64} | wt=4 | rxq=2 @@ -191,7 +191,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD +| | [Tags] | 1518B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${1518} | wt=4 | rxq=2 @@ -203,7 +203,7 @@ | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD +| | [Tags] | 9000B | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=${9000} | wt=4 | rxq=2 @@ -216,7 +216,7 @@ | | ... | trial throughput test. | | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | ... -| | [Tags] | IMIX | 4T4C | MTHREAD +| | [Tags] | IMIX | 4C | | ... | | [Template] | Check RR for eth-l2xcbase-testpmd | | framesize=IMIX_v4_1 | wt=4 | rxq=2 diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot index 14306bf6e9..52d178b83e 100644 --- a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot @@ -56,12 +56,12 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ | | ... | linerate, step 100kpps. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 64B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -76,12 +76,12 @@ | tc02-64B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -97,12 +97,12 @@ | tc03-1518B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 1518B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -117,12 +117,12 @@ | tc04-1518B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -138,12 +138,12 @@ | tc05-9000B-1t1c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | NDRDISC +| | [Tags] | 9000B | 1C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -158,12 +158,12 @@ | tc06-9000B-1t1c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 thread, 1 phy core,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -179,12 +179,12 @@ | tc07-64B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ | | ... | linerate, step 100kpps. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 64B | 2C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -199,12 +199,12 @@ | tc08-64B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -220,12 +220,12 @@ | tc09-1518B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -240,12 +240,12 @@ | tc10-1518B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -261,12 +261,12 @@ | tc11-9000B-2t2c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -281,12 +281,12 @@ | tc12-9000B-2t2c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads, 2 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 phy\ | | ... | cores, 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -302,12 +302,12 @@ | tc13-64B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 40GE\ | | ... | linerate, step 100kpps. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC +| | [Tags] | 64B | 4C | NDRDISC | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -322,12 +322,12 @@ | tc14-64B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${100000} @@ -343,12 +343,12 @@ | tc15-1518B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -363,12 +363,12 @@ | tc16-1518B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${10000} @@ -384,12 +384,12 @@ | tc17-9000B-4t4c-eth-l2xcbase-testpmd-ndrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 40GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} @@ -404,12 +404,12 @@ | tc18-9000B-4t4c-eth-l2xcbase-testpmd-pdrdisc | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads, 4 phy\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 phy\ | | ... | cores, 2 receive queues per NIC port. | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 40GE\ | | ... | linerate, step 5kpps, LT=0.5%. | | ... -| | [Tags] | 9000B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH +| | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH | | ... | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} -- cgit 1.2.3-korg