From 173a910c5f56106cd5aaa620ae0f9cfb94fcfac3 Mon Sep 17 00:00:00 2001 From: Peter Mikus Date: Mon, 9 Jul 2018 09:55:00 +0000 Subject: CSIT-1142 2-node topology - keywords DPDK Change-Id: Ia2676a7b846bd574aa86703fce6b0e3218f98776 Signed-off-by: Peter Mikus --- .../10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot | 22 ++++++------ ...ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 38 ++++++++++---------- .../10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot | 22 ++++++------ ...ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot | 38 ++++++++++---------- .../10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot | 22 ++++++------ ...ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 40 +++++++++++----------- .../40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot | 22 ++++++------ ...e2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot | 40 +++++++++++----------- 8 files changed, 122 insertions(+), 122 deletions(-) (limited to 'tests/dpdk') diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot index 7f942d1494..67c271b021 100644 --- a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-mrr.robot @@ -51,8 +51,8 @@ *** Keywords *** | Check RR for eth-l2xcbase-testpmd | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} phy core(s),\ +| | ... | ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... @@ -65,7 +65,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize} < ${1522} | no | yes | | ... -| | Given Start L2FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | ${perf_trial_duration} | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} @@ -121,7 +121,7 @@ | tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -133,7 +133,7 @@ | tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -145,7 +145,7 @@ | tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -157,7 +157,7 @@ | tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. @@ -170,7 +170,7 @@ | tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -182,7 +182,7 @@ | tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -194,7 +194,7 @@ | tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -206,7 +206,7 @@ | tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. diff --git a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot index 3194976684..82365737c7 100644 --- a/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/10ge2p1x520-eth-l2xcbase-testpmd-ndrpdrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -66,7 +66,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -85,7 +85,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -105,7 +105,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -124,7 +124,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -144,7 +144,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 1 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -163,7 +163,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 1 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -183,7 +183,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -203,7 +203,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -223,7 +223,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -243,7 +243,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -263,7 +263,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 2 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -283,7 +283,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 2 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -303,7 +303,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -323,7 +323,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -343,7 +343,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -363,7 +363,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -383,7 +383,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 4 | 2 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -403,7 +403,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 4 | 2 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot index 5cf6a4412a..c9555473bb 100644 --- a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-mrr.robot @@ -50,8 +50,8 @@ *** Keywords *** | Check RR for ethip4-ip4base-l3fwd | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L3 IPv4 routing config with ${wt} phy core(s),\ +| | ... | ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... @@ -64,7 +64,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize} < ${1522} | no | yes | | ... -| | Given Start L3FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Given Start L3FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | ${perf_trial_duration} | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} @@ -120,7 +120,7 @@ | tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -132,7 +132,7 @@ | tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -144,7 +144,7 @@ | tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -156,7 +156,7 @@ | tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 2 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. @@ -169,7 +169,7 @@ | tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -181,7 +181,7 @@ | tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -193,7 +193,7 @@ | tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -205,7 +205,7 @@ | tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L3 IPv4 routing config with 4 threads,\ +| | ... | [Cfg] DUT runs L3 IPv4 routing config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. diff --git a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot index d72c4233a4..fe6b5b261e 100644 --- a/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/10ge2p1x520-ethip4-ip4base-l3fwd-ndrpdrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -66,7 +66,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -86,7 +86,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -107,7 +107,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -127,7 +127,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -148,7 +148,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L3FWD on all DUTs | 1 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -168,7 +168,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L3FWD on all DUTs | 1 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -189,7 +189,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -209,7 +209,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -230,7 +230,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -250,7 +250,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -271,7 +271,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L3FWD on all DUTs | 2 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -291,7 +291,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L3FWD on all DUTs | 2 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -312,7 +312,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -332,7 +332,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -353,7 +353,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -373,7 +373,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L3FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} @@ -394,7 +394,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L3FWD on all DUTs | 4 | 2 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} @@ -414,7 +414,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L3FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L3FWD on all DUTs | 4 | 2 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | ${min_rate} | ${max_rate} | | ... | ${threshold} | ${perf_pdr_loss_acceptance} diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot index 4adfcca1a0..9257cddb62 100644 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-mrr.robot @@ -51,8 +51,8 @@ *** Keywords *** | Check RR for eth-l2xcbase-testpmd | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} phy core(s),\ +| | ... | ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... @@ -65,7 +65,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize} < ${1522} | no | yes | | ... -| | Given Start L2FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | ${perf_trial_duration} | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} @@ -121,7 +121,7 @@ | tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -133,7 +133,7 @@ | tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -145,7 +145,7 @@ | tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -157,7 +157,7 @@ | tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. @@ -170,7 +170,7 @@ | tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -182,7 +182,7 @@ | tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -194,7 +194,7 @@ | tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -206,7 +206,7 @@ | tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot index 06ec4b62f8..fb42ee531c 100644 --- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -67,7 +67,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -87,7 +87,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -108,7 +108,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -128,7 +128,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -149,7 +149,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 1 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -169,7 +169,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 1 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -190,7 +190,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -210,7 +210,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -231,7 +231,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -251,7 +251,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -272,7 +272,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 2 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 2 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -313,7 +313,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -333,7 +333,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -354,7 +354,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -374,7 +374,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -395,7 +395,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 4 | 2 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -415,8 +415,8 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 4 | 2 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} \ No newline at end of file +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot index ec7cf1128b..435512408d 100644 --- a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot +++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-mrr.robot @@ -53,8 +53,8 @@ *** Keywords *** | Check RR for eth-l2xcbase-testpmd | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. +| | ... | [Cfg] DUT runs L2 frame forwarding config with ${wt} phy core(s),\ +| | ... | ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ | | ... | trial throughput test. | | ... @@ -69,7 +69,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize} < ${1522} | no | yes | | ... -| | Given Start L2FWD '${wt}' worker threads and '${rxq}' rxqueues with jumbo frames '${jumbo_frames}' +| | Given Start L2FWD on all DUTs | ${wt} | ${rxq} | ${jumbo_frames} | | Then Traffic should pass with maximum rate | ${perf_trial_duration} | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} @@ -125,7 +125,7 @@ | tc05-64B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -137,7 +137,7 @@ | tc06-1518B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -149,7 +149,7 @@ | tc07-9000B-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -161,7 +161,7 @@ | tc08-IMIX-2t2c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 2 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 2 phy cores, 1 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. @@ -174,7 +174,7 @@ | tc09-64B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ | | ... | trial throughput test. @@ -186,7 +186,7 @@ | tc10-1518B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ | | ... | trial throughput test. @@ -198,7 +198,7 @@ | tc11-9000B-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ | | ... | trial throughput test. @@ -210,7 +210,7 @@ | tc12-IMIX-4t4c-eth-l2xcbase-testpmd-mrr | | [Documentation] -| | ... | [Cfg] DUT runs L2 frame forwarding config with 4 threads,\ +| | ... | [Cfg] DUT runs L2 frame forwarding config with \ | | ... | 4 phy cores, 2 receive queue per NIC port. | | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ | | ... | trial throughput test. diff --git a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot index 52d178b83e..0916d7d1c1 100644 --- a/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot +++ b/tests/dpdk/perf/40ge2p1xl710-eth-l2xcbase-testpmd-ndrpdrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -69,7 +69,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -89,7 +89,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -110,7 +110,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -130,7 +130,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 1 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -151,7 +151,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 1 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -171,7 +171,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '1' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 1 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -192,7 +192,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -212,7 +212,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -233,7 +233,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -253,7 +253,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 2 | 1 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -274,7 +274,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 2 | 1 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -294,7 +294,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '2' worker threads and '1' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 2 | 1 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -315,7 +315,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -335,7 +335,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -356,7 +356,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -376,7 +376,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'no' +| | Given Start L2FWD on all DUTs | 4 | 2 | no | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} @@ -397,7 +397,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 4 | 2 | yes | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} @@ -417,8 +417,8 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Start L2FWD '4' worker threads and '2' rxqueues with jumbo frames 'yes' +| | Given Start L2FWD on all DUTs | 4 | 2 | yes | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} \ No newline at end of file +| | ... | ${perf_pdr_loss_acceptance_type} -- cgit 1.2.3-korg