From 70cbaaee0e6210682ce6d278ea645b8bea153b67 Mon Sep 17 00:00:00 2001 From: Matej Klotton Date: Fri, 22 Jul 2016 09:34:25 +0200 Subject: CSIT-220: Rename directories in tests directory MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - Move performance directory one level up and rename it to “perf” - Rename “suites” directory to “func” - Create __init__.py in “perf” directory - Rename fds_related_tests to fds Change-Id: I59f06afe1c5b95dd8a48417b8fbfd1fca8797097 Signed-off-by: Matej Klotton --- .../bridge_domain/bridge_domain_untagged.robot | 369 +++++++++++++++++++++ 1 file changed, 369 insertions(+) create mode 100644 tests/func/bridge_domain/bridge_domain_untagged.robot (limited to 'tests/func/bridge_domain/bridge_domain_untagged.robot') diff --git a/tests/func/bridge_domain/bridge_domain_untagged.robot b/tests/func/bridge_domain/bridge_domain_untagged.robot new file mode 100644 index 0000000000..1876d901bb --- /dev/null +++ b/tests/func/bridge_domain/bridge_domain_untagged.robot @@ -0,0 +1,369 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/qemu.robot +| Library | resources.libraries.python.Trace +| Force Tags | HW_ENV | VM_ENV +| Test Setup | Run Keywords | Setup all DUTs before test +| ... | AND | Setup all TGs before traffic script +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| Documentation | *L2 bridge-domain test cases* +| ... +| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links +| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with +| ... | single links between nodes; TG=DUT1=DUT2=TG 3-node circular +| ... | topology with double parallel links and TG=DUT=VM 3-node topology +| ... | with VM and double parallel links. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply +| ... | to all links. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with static MACs; MAC +| ... | learning enabled and Split Horizon Groups (SHG) depending on +| ... | test case. +| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on +| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) +| ... | src-addr, dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 +| ${shg1}= | 3 +| ${shg2}= | 4 +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +*** Test Cases *** +| TC01: DUT reports active interfaces +| | [Documentation] +| | ... | [Top] TG=DUT1; TG-DUT1-DUT2-TG. [Enc] None. [Cfg] Discovered \ +| | ... | active interfaces. [Ver] Report active interfaces on DUT. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | 3_NODE_SINGLE_LINK_TOPO +| | VPP reports interfaces on | ${nodes['DUT1']} + +| TC02: DUT with L2BD (MAC learning) switch ICMPv4 between two TG links +| | [Documentation] +| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two i/fs into L2BD with MAC learning. [Ver] Make TG verify +| | ... | ICMPv4 Echo Req pkts are switched thru DUT1 in both directions +| | ... | and are correct on receive. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id1} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} + +| TC03: DUT1 and DUT2 with L2BD (MAC learning) switch between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and DUT2 \ +| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG +| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in +| | ... | both directions and are correct on receive. [Ref] +| | [Tags] | 3_NODE_SINGLE_LINK_TOPO +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} + +| TC04: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ +| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make +| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 +| | ... | in both directions and are correct on receive. [Ref] +| | [Tags] | 3_NODE_SINGLE_LINK_TOPO +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut1} +| | ... | ${dut1_node} +| | ... | ${dut1_to_tg} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut2} +| | ... | ${dut1_node} +| | ... | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut1} +| | ... | ${dut2_node} +| | ... | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut2} +| | ... | ${dut2_node} +| | ... | ${dut2_to_tg} +| | ... | ${bd_id2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1} +| | ... | ${tg_to_dut2} + +| TC05: DUT1 and DUT2 with L2BD (MAC learn) and SHG switch between four TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \ +| | ... | DUT2 configure four i/fs into L2BD with MAC learning and the +| | ... | same SHG on i/fs towards TG. [Ver] Make TG verify ICMPv4 Echo +| | ... | Req pkts are switched thru DUT1 and DUT2 in both directions and +| | ... | are correct on receive; verify no pkts are switched thru SHG +| | ... | isolated interfaces. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} | ${shg2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id2} | ${shg2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${bd_id2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv4 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut1_if1} +| | | ... | ${tg_to_dut1_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv4 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut2_if1} +| | | ... | ${tg_to_dut2_if2} + +| TC06: DUT with two L2BDs (MAC learn) switches ICMPv4 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local +| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} + +| TC07: DUT with two L2BDs (MAC learn) switches ICMPv6 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local +| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} + +| TC08: DUT with two L2BDs (static MACs) switches ICMPv4 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM +| | ... | and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} + +| TC09: DUT with two L2BDs (static MACs) switches ICMPv6 between TG and VM links +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM +| | ... | and i/f to TG; configure VM to loop pkts back betwen its two +| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are +| | ... | switched thru DUT1 and VM in both directions and are correct on +| | ... | receive. [Ref] +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV +| | Given Path for 2-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | And Interfaces in 2-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if1} +| | ... | ${bd_id1} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${vhost_if1} +| | ... | ${bd_id1} +| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2} +| | ... | learn=${FALSE} +| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if2} +| | ... | ${dut_node} +| | ... | ${dut_to_tg_if2} +| | ... | ${bd_id2} +| | And Destination port is added to L2FIB on DUT node | ${tg_node} +| | ... | ${tg_to_dut_if1} +| | ... | ${dut_node} +| | ... | ${vhost_if2} +| | ... | ${bd_id2} +| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1} +| | ... | ${sock2} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node} -- cgit 1.2.3-korg