From 53d69321e41aa6fd94abc16c7050314dc2e53f08 Mon Sep 17 00:00:00 2001 From: Tibor Frank Date: Thu, 8 Jun 2017 14:45:26 +0200 Subject: CSIT-664: Refactor setups and teardowns - Add suite setup for performance IPSec tests - Add test teardown for performance SNAT tests - Add setups and teardowns for functional tests - Clean up the code Change-Id: Ia456e9f3ff0f0f2bb9a03f692f27c7f9a2817621 Signed-off-by: Tibor Frank --- tests/func/honeycomb/__init__.robot | 9 ++-- .../honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot | 12 +++++ .../mgmt-cfg-dhcp-apihc-apivat-func.robot | 26 ++++++++--- .../func/honeycomb/mgmt-cfg-int-apihcnc-func.robot | 10 +++- .../mgmt-cfg-int-subint-apihc-apivat-func.robot | 16 ++++++- .../mgmt-cfg-intip4-intip6-apihc-apivat-func.robot | 27 ++++++++++- .../mgmt-cfg-inttap-apihc-apivat-func.robot | 6 +++ .../mgmt-cfg-intvhost-apihc-apivat-func.robot | 3 ++ .../mgmt-cfg-l2bd-apihc-apivat-func.robot | 8 ++++ .../mgmt-cfg-l2fib-apihc-apivat-func.robot | 7 ++- .../mgmt-cfg-lisp-apihc-apivat-func.robot | 24 ++++++++++ .../honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot | 14 ++++++ .../honeycomb/mgmt-cfg-pbb-apihc-apivat-func.robot | 19 ++++---- .../mgmt-cfg-pluginacl-apihc-apivat-func.robot | 54 +++++++++++++++++++--- .../honeycomb/mgmt-cfg-policer-apihc-func.robot | 26 ++++++++--- .../honeycomb/mgmt-cfg-proxyarp-apihc-func.robot | 13 +++++- .../honeycomb/mgmt-cfg-proxynd6-apihc-func.robot | 9 ++++ .../mgmt-cfg-routing-apihc-apivat-func.robot | 18 +++++++- .../func/honeycomb/mgmt-cfg-slaac-apihc-func.robot | 31 ++++++++++--- .../mgmt-cfg-snat44-apihc-apivat-func.robot | 11 +++++ .../mgmt-cfg-spanrx-apihc-apivat-func.robot | 20 ++++++-- .../mgmt-cfg-vxlan-apihc-apivat-func.robot | 11 +++++ .../mgmt-cfg-vxlangpe-apihc-apivat-func.robot | 8 ++-- tests/func/honeycomb/mgmt-notif-apihcnc-func.robot | 6 +++ .../honeycomb/mgmt-statepersist-apihc-func.robot | 32 +++++++++++-- 25 files changed, 359 insertions(+), 61 deletions(-) (limited to 'tests/func/honeycomb') diff --git a/tests/func/honeycomb/__init__.robot b/tests/func/honeycomb/__init__.robot index 128f19f6a0..3f79a6a1f8 100644 --- a/tests/func/honeycomb/__init__.robot +++ b/tests/func/honeycomb/__init__.robot @@ -19,12 +19,13 @@ | Library | resources/libraries/python/honeycomb/HcPersistence.py | Resource | resources/libraries/robot/default.robot | Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Suite Setup | Run Keywords | Setup All DUTs Before Test | AND +| ... +| Suite Setup | Run Keywords | Configure all DUTs before test | AND | ... | Configure Honeycomb for testing | ${node} | AND | ... | Configure ODL Client for testing | ${node} | AND | ... | Set Global Variable | ${node} -| Suite Teardown -| ... | Archive Honeycomb log file | ${node} +| ... +| Suite Teardown | Archive Honeycomb log file | ${node} *** Keywords *** | Configure Honeycomb for testing @@ -35,7 +36,7 @@ | | Configure Persistence | ${node} | disable | | Configure jVPP timeout | ${node} | ${14} | | Clear Persisted Honeycomb Configuration | ${node} -| | Setup Honeycomb Service On DUTs | ${node} +| | Configure Honeycomb service on DUTs | ${node} | Configure ODL Client for testing | | [Arguments] | ${node} diff --git a/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot index 9d94d3d024..b18b111981 100644 --- a/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-acl-apihc-apivat-func.robot @@ -20,13 +20,17 @@ | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/access_control_lists.robot | Variables | resources/test_data/honeycomb/acl.py +| ... | Suite Teardown | Restart Honeycomb and VPP | ${node} +| ... | Documentation | *Honeycomb access control lists test suite.* +| ... | Force Tags | HC_FUNC *** Test Cases *** | TC01: Honeycomb can create ACL classify table | | [Documentation] | Check if Honeycomb API can create an ACL table. +| | ... | | Given ACL table from Honeycomb should not exist | | ... | ${node} | ${hc_acl_table['name']} | | And ACL table from VAT should not exist @@ -39,6 +43,7 @@ | TC02: Honeycomb can remove ACL table | | [Documentation] | Check if Honeycomb API can delete an ACL table. +| | ... | | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} | | And ACL table from VAT should be | | ... | ${node} | ${table_index} | ${vat_acl_table} @@ -50,6 +55,7 @@ | TC03: Honeycomb manages more than one ACL table | | [Documentation] | Check if Honeycomb API can create another ACL table. +| | ... | | Given ACL table from Honeycomb should not exist | | ... | ${node} | ${hc_acl_table['name']} | | And ACL table from VAT should not exist @@ -65,6 +71,7 @@ | TC04: Honeycomb can add ACL session to table | | [Documentation] | Check if Honeycomb API can add an ACL session to a table. +| | ... | | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} | | And ACL table from VAT should be | | ... | ${node} | ${table_index} | ${vat_acl_table} @@ -77,6 +84,7 @@ | TC05: Honeycomb can remove ACL session | | [Documentation] | Check if Honeycomb API can remove an ACL session. +| | ... | | Given ACL session from Honeycomb should be | | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session} | | And ACL session from VAT should be @@ -91,6 +99,7 @@ | TC06: Honeycomb manages more than one ACL session on one table | | [Documentation] | Check if Honeycomb API can add another ACL session\ | | ... | to a table. +| | ... | | Given ACL session from Honeycomb should not exist | | ... | ${node} | ${hc_acl_table['name']} | ${hc_acl_session['match']} | | And ACL session from VAT should not exist @@ -110,6 +119,7 @@ | TC07: Honeycomb enables ACL on interface | | [Documentation] | Check if Honeycomb API can enable ACL on an interface. +| | ... | | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} | | And ACL table from VAT should be | | ... | ${node} | ${table_index} | ${vat_acl_table} @@ -126,6 +136,7 @@ | TC08: Honeycomb disables ACL on interface | | [Documentation] | Check if Honeycomb API can disable ACL on an interface. +| | ... | | Given Interface ACL configuration from Honeycomb should be | | ... | ${node} | ${interface} | ${hc_acl_table['name']} | | And Interface ACL configuration from VAT should be @@ -139,6 +150,7 @@ | TC09: Honeycomb can remove one out of multiple ACL tables | | [Documentation] | Check if Honeycomb API can delete an ACL table if more\ | | ... | than one table exists. +| | ... | | Given ACL table from Honeycomb should be | ${node} | ${hc_acl_table_oper} | | And ACL table from VAT should be | | ... | ${node} | ${table_index} | ${vat_acl_table} diff --git a/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot index 5b6656958d..fba37e6318 100644 --- a/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-dhcp-apihc-apivat-func.robot @@ -24,9 +24,14 @@ | Library | resources.libraries.python.IPv6Util | Library | resources.libraries.python.Routing | Variables | resources/test_data/honeycomb/dhcp_relay.py +| ... +| ... | Documentation | *Honeycomb DHCP relay test suite.* +| ... | Test Setup | Clear Packet Trace on All DUTs | ${nodes} +| ... | Suite Teardown | Restart Honeycomb and VPP | ${node} +| ... | Force Tags | HC_FUNC *** Test Cases *** @@ -38,20 +43,23 @@ | | ... | neighbors and configure DHCP relay. | | ... | [Ver] Send DHCP packets from TG interface to DUT. Receive all packets\ | | ... | on the second TG interface and verify required fields. +| | ... | | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} | | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv4 +| | ... | | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb configures DHCP relay | ${node} | ${relay1} | ipv4 | ${0} | | Then DHCP relay configuration from Honeycomb should contain | | ... | ${node} | ${relay1_oper} | | When DHCP relay test setup -| | Then Send DHCP messages and check answer | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} -| | ... | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} | ${client_ip} -| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip} +| | Then Send DHCP messages and check answer | ${tg_node} | ${tg_to_dut_if1} +| | ... | ${tg_to_dut_if2} | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} +| | ... | ${client_ip} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip} | TC02: Honeycomb can remove DHCP relay entry | | [Documentation] | Remove DHCP relay configuration, and verify that\ | | ... | it was removed. +| | ... | | Given DHCP relay configuration from Honeycomb should contain | | ... | ${node} | ${relay1_oper} | | When Honeycomb clears DHCP relay configuration | ${node} @@ -60,7 +68,9 @@ | TC03: Honeycomb can configure multiple DHCP relay servers. | | [Documentation] | Configure multiple DHCP relay servers and verify\ | | ... | their configuration using operational data. +| | ... | | [Teardown] | Honeycomb clears DHCP relay configuration | ${node} +| | ... | | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node} | | And Honeycomb configures DHCP relay | ${node} | ${relay2} | ipv4 | ${0} | | Then DHCP relay configuration from Honeycomb should contain @@ -74,9 +84,11 @@ | | ... | neighbors and configure DHCP relay. | | ... | [Ver] Send DHCPv6 packets from TG interface to DUT. Receive all\ | | ... | packets on the second TG interface and verify required fields. +| | ... | | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} | | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv6 | | ... | AND | Honeycomb clears DHCP relay configuration | ${node} +| | ... | | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb configures DHCP relay | ${node} | ${relay_v6} | ipv6 | ${0} | | Then DHCP relay configuration from Honeycomb should contain @@ -96,10 +108,10 @@ | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} | | Honeycomb sets interface IPv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | Add ARP on DUT -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac} -| | Add ARP on DUT -| | ... | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server2_ip} | ${tg_to_dut_if2_mac} +| | Add ARP on DUT | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server1_ip} +| | ... | ${tg_to_dut_if2_mac} +| | Add ARP on DUT | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server2_ip} +| | ... | ${tg_to_dut_if2_mac} | | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | ${NONE} | local | | ... | ${FALSE} | ${NONE} diff --git a/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot b/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot index c6ae380f9b..3e3c64fd1f 100644 --- a/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-int-apihcnc-func.robot @@ -19,11 +19,13 @@ | Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords | ... | WITH NAME | InterfaceAPI | Variables | resources/test_data/honeycomb/netconf/triggers.py +| ... | Documentation | *Netconf test suite. Contains test cases that need to bypass\ | ... | REST API.* +| ... | Force Tags | HC_FUNC | HC_REST_ONLY -| Suite Teardown -| ... | Restart Honeycomb and VPP | ${node} +| ... +| Suite Teardown | Restart Honeycomb and VPP | ${node} *** Variables *** | ${interface}= | ${node['interfaces']['port1']['name']} @@ -34,6 +36,7 @@ | TC01: Honeycomb can create and delete interfaces | | [Documentation] | Repeatedly create and delete an interface through Netconf\ | | ... | and check the reply for any errors. +| | ... | | Given Netconf session should be established | ${node} | | And Honeycomb creates first L2 bridge domain | | ... | ${node} | bd_netconf | ${bd_settings} @@ -44,6 +47,7 @@ | TC02: Transaction revert test case 1 | | [Documentation] | Configure two conflicting VxLAN tunnels, then verify\ | | ... | that neither tunnel exists. +| | ... | | Given Netconf session should be established | ${node} | | ${if_data}= | And InterfaceAPI.Get all interfaces oper data | ${node} | | When Error trigger is sent | ${trigger_revert1} @@ -53,6 +57,7 @@ | TC03: Transaction revert test case 2 | | [Documentation] | Configure two conflicting TAP interfaces, then verify\ | | ... | that neither interface exists. +| | ... | | Given Netconf session should be established | ${node} | | ${if_data}= | And InterfaceAPI.Get all interfaces oper data | ${node} | | When Error trigger is sent | ${trigger_revert1} @@ -61,6 +66,7 @@ | TC04: Vlan subinterface creation | | [Documentation] | Configure a Vlan sub-interface under a physical interface. +| | ... | | Given Netconf session should be established | ${node} | | When Error Trigger Is Sent | | ... | ${trigger_vlan} | interface=${interface} diff --git a/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot index 803cfa0932..f766eb296c 100644 --- a/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-int-subint-apihc-apivat-func.robot @@ -18,10 +18,13 @@ | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Variables | resources/test_data/honeycomb/sub_interfaces.py +| ... | Suite Setup | Add Interface local0 To Topology | ${node} -| Suite Teardown -| ... | Restart Honeycomb and VPP | ${node} +| ... +| Suite Teardown | Restart Honeycomb and VPP | ${node} +| ... | Force Tags | HC_FUNC +| ... | Documentation | *Honeycomb sub-interface management test suite.* *** Variables *** @@ -365,8 +368,10 @@ | TC17: Honeycomb modifies existing sub-interface ipv4 address | | [Documentation] | Check if Honeycomb can modify an ipv4 address already\ | | ... | configured on the sub-interface. +| | ... | | [Teardown] | Honeycomb removes all sub-interface ipv4 addresses | | ... | ${node} | ${super_if} | ${sub_if_id} +| | ... | | Given sub-interface ipv4 address from Honeycomb should be empty | | ... | ${node} | ${super_if} | ${sub_if_id} | | And sub-interface ipv4 address from VAT should be empty @@ -387,6 +392,7 @@ | TC18: Honeycomb modifies sub-interface exact tag match | | [Documentation] | Check if Honeycomb can modify a sub-interface with exact\ | | ... | tag match. +| | ... | | Given Honeycomb configures interface state | ${node} | ${super_if2} | down | | And sub-interface Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${super_if2} | ${sub_if_id} @@ -440,8 +446,10 @@ | TC21: Honeycomb modifies existing sub-interface ipv6 address | | [Documentation] | Check if Honeycomb can modify an ipv6 address already\ | | ... | configured on the sub-interface. +| | ... | | [Teardown] | Honeycomb removes all sub-interface ipv6 addresses | | ... | ${node} | ${super_if} | ${sub_if_id} +| | ... | | Given sub-interface ipv6 address from Honeycomb should be empty | | ... | ${node} | ${super_if} | ${sub_if_id} | | And sub-interface ipv6 address from VAT should be empty @@ -462,6 +470,7 @@ | TC22: Honeycomb can configure unnumbered sub-interface | | [Documentation] | Check if Honeycomb can configure an unnumbered interface\ | | ... | on a sub-interface, borrowing the IP address of 'local0'. +| | ... | | Given sub-interface ipv4 address from Honeycomb should be empty | | ... | ${node} | ${super_if} | ${sub_if_id} | | And sub-interface ipv4 address from VAT should be empty @@ -485,8 +494,10 @@ | TC23: Honeycomb removes sub-interface unnumbered configuration | | [Documentation] | Check if Honeycomb can remove unnumbered configuration\ | | ... | from a sub-interface. +| | ... | | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node} | | ... | local0 +| | ... | | Given IPv4 address from Honeycomb should be | | ... | ${node} | local0 | ${ipv4['address']} | ${ipv4['prefix-length']} | | And IPv4 address from VAT should be @@ -513,6 +524,7 @@ | TC24: Honeycomb can configure unnumbered interface using a sub-interface | | [Documentation] | Check if Honeycomb can configure an unnumbered interface\ | | ... | on an interface, borrowing the IP address of a sub-interface. +| | ... | | Given IPv4 address from Honeycomb should be empty | ${node} | local0 | | And ipv4 address from VAT should be empty | ${node} | local0 | | And sub-interface ipv4 address from Honeycomb should be empty diff --git a/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot index dd619efbe7..03160e0a65 100644 --- a/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot @@ -22,15 +22,18 @@ | Resource | resources/libraries/robot/testing_path.robot | Resource | resources/libraries/robot/ipv6.robot | Variables | resources/test_data/honeycomb/interface_ip.py +| ... | Force Tags | HC_FUNC -| Suite Teardown -| | ... | Restart Honeycomb and VPP | ${node} +| ... +| Suite Teardown | Restart Honeycomb and VPP | ${node} +| ... | Documentation | *Honeycomb interface management test suite.* *** Test Cases *** | TC01: Honeycomb configures and reads interface state | | [Documentation] | Check if Honeycomb API can modify the admin state of\ | | ... | VPP interfaces. +| | ... | | Given Interface state from Honeycomb should be | | ... | ${node} | ${interface} | down | | And Interface state from VAT should be | ${node} | ${interface} | down @@ -46,6 +49,7 @@ | TC02: Honeycomb modifies interface IPv4 address with netmask | | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\ | | ... | with address and netmask provided. +| | ... | | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface} | | And ipv4 address from VAT should be empty | ${node} | ${interface} | | When Honeycomb sets interface IPv4 address | ${node} | ${interface} @@ -59,6 +63,7 @@ | TC03: Honeycomb removes IPv4 address from interface | | [Documentation] | Check if Honeycomb API can remove configured ipv4\ | | ... | addresses from interface. +| | ... | | Given IPv4 address from Honeycomb should be | | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix} | | And IPv4 address from VAT should be @@ -71,8 +76,10 @@ | TC04: Honeycomb modifies interface IPv4 address with prefix | | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\ | | ... | with address and prefix provided. +| | ... | | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node} | | ... | ${interface} +| | ... | | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface} | | And ipv4 address from VAT should be empty | ${node} | ${interface} | | When Honeycomb sets interface IPv4 address with prefix @@ -85,8 +92,10 @@ | TC05: Honeycomb modifies IPv4 neighbor table | | [Documentation] | Check if Honeycomb API can add and remove ARP entries. +| | ... | | [Teardown] | Honeycomb clears all interface IPv4 neighbors | | ... | ${node} | ${interface} +| | ... | | Given IPv4 neighbor from Honeycomb should be empty | | ... | ${node} | ${interface} | | When Honeycomb adds interface IPv4 neighbor @@ -96,8 +105,10 @@ | TC06: Honeycomb modifies interface configuration - IPv6 | | [Documentation] | Check if Honeycomb API can configure interfaces for ipv6. +| | ... | | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node} | | ... | ${interface} +| | ... | | Given IPv6 address from Honeycomb should be empty | | ... | ${node} | ${interface} | | And IPv6 address from VAT should be empty @@ -111,8 +122,10 @@ | TC07: Honeycomb modifies IPv6 neighbor table | | [Documentation] | Check if Honeycomb API can add and remove ARP entries. +| | ... | | [Teardown] | Honeycomb clears all interface IPv6 neighbors | | ... | ${node} | ${interface} +| | ... | | Given IPv6 neighbor from Honeycomb should be empty | | ... | ${node} | ${interface} | | When Honeycomb adds interface IPv6 neighbor @@ -123,6 +136,7 @@ | TC08: Honeycomb modifies interface configuration - MTU | | [Documentation] | Check if Honeycomb API can configure interface\ | | ... | MTU value. +| | ... | | When Honeycomb sets interface ethernet configuration | | ... | ${node} | ${interface} | ${ethernet} | | Then Interface ethernet Operational Data From Honeycomb Should Be @@ -133,8 +147,10 @@ | TC09: Honeycomb modifies interface configuration - vrf | | [Documentation] | Check if Honeycomb API can configure interface\ | | ... | vrf ID. +| | ... | | [Teardown] | Honeycomb sets interface VRF ID | | ... | ${node} | ${interface} | ${0} | ipv4 +| | ... | | When Honeycomb sets interface VRF ID | | ... | ${node} | ${interface} | ${1} | ipv4 | | Then Interface VRF ID from Honeycomb should be @@ -201,9 +217,12 @@ | TC11: Honeycomb fails to configure two IPv4 addresses from the same subnet | | [Documentation] | Check if Honeycomb can configure two IPv4 addresses in\ | | ... | the same subnet onto a single interface. It should not be possible. +| | ... | | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node} | | ... | ${interface} +| | ... | | [Tags] | EXPECTED_FAILING +| | ... # VPP API does not configure the second address, but returns success. VPP-649 | | When Honeycomb sets interface IPv4 address with prefix | | ... | ${node} | ${interface} | 192.168.0.1 | ${9} @@ -215,7 +234,9 @@ | TC12: Honeycomb fails to configure two IPv6 addresses from the same subnet | | [Documentation] | Check if Honeycomb can configure two IPv6 addresses in\ | | ... | the same subnet onto a single interface. It should not be possible. +| | ... | | [Tags] | EXPECTED_FAILING +| | ... # VPP API does not configure the second address, but returns success. VPP-649 | | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node} | | ... | ${interface} @@ -229,6 +250,7 @@ | TC13: Honeycomb can configure unnumbered interface | | [Documentation] | Check if Honeycomb can configure an unnumbered interface\ | | ... | on a physical interface, borrowing the IP address of 'local0'. +| | ... | | Given Honeycomb sets interface IPv4 address | ${node} | | ... | local0 | ${ipv4_address} | ${ipv4_prefix} | | When Honeycomb adds unnumbered configuration to interface @@ -247,6 +269,7 @@ | TC14: Honeycomb removes interface unnumbered configuration | | [Documentation] | Check if Honeycomb can remove unnumbered configuration\ | | ... | from an interface. +| | ... | | Given IPv4 address from Honeycomb should be | | ... | ${node} | local0 | ${ipv4_address} | ${ipv4_prefix} | | And IPv4 address from VAT should be diff --git a/tests/func/honeycomb/mgmt-cfg-inttap-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-inttap-apihc-apivat-func.robot index 2efdaf2eb5..74d99a9684 100644 --- a/tests/func/honeycomb/mgmt-cfg-inttap-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-inttap-apihc-apivat-func.robot @@ -26,14 +26,18 @@ | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Resource | resources/libraries/robot/honeycomb/tap.robot +| ... | Force Tags | HC_FUNC +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Documentation | *Honeycomb TAP management test suite.* *** Test Cases *** | TC01: Honeycomb configures TAP interface | | [Documentation] | Check if Honeycomb API can configure a TAP interface. +| | ... | | Given TAP Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${tap_interface} | | And TAP Operational Data From VAT Should Be empty @@ -48,6 +52,7 @@ | TC02: Honeycomb modifies existing TAP interface configuration | | [Documentation] | Check if Honeycomb API can re-configure and existing TAP\ | | ... | interface with new settings. +| | ... | | Given TAP Operational Data From Honeycomb Should Be | | ... | ${node} | ${tap_interface} | ${tap_settings} | | And TAP Operational Data From VAT Should Be @@ -61,6 +66,7 @@ | TC03: Honeycomb removes TAP interface | | [Documentation] | Check if Honeycomb API can remove TAP interface. +| | ... | | Given TAP Operational Data From Honeycomb Should Be | | ... | ${node} | ${tap_interface} | ${tap_settings2} | | And TAP Operational Data From VAT Should Be diff --git a/tests/func/honeycomb/mgmt-cfg-intvhost-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-intvhost-apihc-apivat-func.robot index 24e79fa799..64136bcfd6 100644 --- a/tests/func/honeycomb/mgmt-cfg-intvhost-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-intvhost-apihc-apivat-func.robot @@ -26,9 +26,12 @@ | Resource | resources/libraries/robot/default.robot | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/vhost_user.robot +| ... | Force Tags | HC_FUNC +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Documentation | *Honeycomb vhost-user interface management test suite.* *** Test Cases *** diff --git a/tests/func/honeycomb/mgmt-cfg-l2bd-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-l2bd-apihc-apivat-func.robot index e8649bd0c7..e6287e79ae 100644 --- a/tests/func/honeycomb/mgmt-cfg-l2bd-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-l2bd-apihc-apivat-func.robot @@ -28,16 +28,20 @@ | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot +| ... | Suite Teardown | Run keywords | ... | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} | ... | AND | Honeycomb removes all bridge domains | ${node} | @{interfaces} +| ... | Force Tags | HC_FUNC +| ... | Documentation | *Honeycomb bridge domain management test suite.* *** Test Cases *** | TC01: Honeycomb sets up l2 bridge domain | | [Documentation] | Check if Honeycomb can create bridge domains on VPP node. +| | ... | | When Honeycomb creates first l2 bridge domain | | ... | ${node} | ${bd1_name} | ${bd_settings} | | Then Bridge domain Operational Data From Honeycomb Should Be @@ -48,6 +52,7 @@ | TC02: Honeycomb manages multiple bridge domains on node | | [Documentation] | Check if Honeycomb can manage multiple bridge domains on\ | | ... | a single node. +| | ... | | Given Bridge domain Operational Data From Honeycomb Should Be | | ... | ${node} | ${bd1_name} | ${bd_settings} | | When Honeycomb creates l2 bridge domain @@ -64,6 +69,7 @@ | TC03: Honeycomb removes bridge domains | | [Documentation] | Check if Honeycomb can remove bridge domains from a VPP\ | | ... | node. +| | ... | | Given Bridge domain Operational Data From Honeycomb Should Be | | ... | ${node} | ${bd1_name} | ${bd_settings} | | When Honeycomb removes all bridge domains | ${node} @@ -73,6 +79,7 @@ | TC04: Honeycomb assigns interfaces to bridge domain | | [Documentation] | Check if Honeycomb can assign VPP interfaces to an\ | | ... | existing bridge domain. +| | ... | | Given Honeycomb creates first l2 bridge domain | | ... | ${node} | ${bd1_name} | ${bd_settings} | | When Honeycomb adds interfaces to bridge domain @@ -89,6 +96,7 @@ | TC05: Honeycomb cannot remove bridge domain with an interface assigned | | [Documentation] | Check if Honeycomb can remove a bridge domain that has an\ | | ... | interface assigned to it. Expect to fail with code 500. +| | ... | | Given Bridge domain Operational Data From Honeycomb Should Be | | ... | ${node} | ${bd1_name} | ${bd_settings} | | And Bridge domain Operational Data From VAT Should Be diff --git a/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot index 48527b98df..184f361947 100644 --- a/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot @@ -19,15 +19,18 @@ | Resource | resources/libraries/robot/honeycomb/l2_fib.robot | Variables | resources/test_data/honeycomb/l2_fib.py | ${node} | ${interface} | ... | ${interface2} +| ... | Documentation | *Honeycomb L2 FIB management test suite.* -| Suite Setup | Run keywords -| ... | Set test interface down +| ... +| Suite Setup | Run keywords | Set test interface down +| ... | Suite Teardown | Run keywords | ... | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} | ... | AND | ... | Honeycomb removes all bridge domains | ... | ${node} | ${interface} | ${interface2} +| ... | Force tags | HC_FUNC *** Variables *** diff --git a/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot index 9f4a328258..42f5a84b8f 100644 --- a/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot @@ -27,14 +27,18 @@ | Resource | resources/libraries/robot/honeycomb/lisp.robot | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot | Variables | resources/test_data/honeycomb/lisp.py +| ... | Documentation | *Honeycomb Lisp test suite.* +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Force Tags | HC_FUNC *** Test Cases *** | TC01: Honeycomb enables LISP feature | | [Documentation] | Check if Honeycomb can enable the Lisp feature. +| | ... | | Given Lisp Should Not Be Configured | ${node} | | When Honeycomb enables LISP | ${node} | | Then LISP state from Honeycomb should be | ${node} | ${state} @@ -42,6 +46,7 @@ | TC02: Honeycomb adds locator set and locator | | [Documentation] | Check if Honeycomb can configure a locator set. +| | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set} | | Then Locator Set From Honeycomb Should Be @@ -50,6 +55,7 @@ | TC03: Honeycomb configures Lisp - remote mapping - Bridge Domain | | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\ | | ... | with a bridge domain. +| | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And Honeycomb creates first l2 bridge domain | | ... | ${node} | ${bd_name} | ${bd_settings} @@ -61,6 +67,7 @@ | TC04: Honeycomb can remove Lisp mapping | | [Documentation] | Check if Honeycomb can remove a configured Lisp mapping. +| | ... | | Given LISP mapping from Honeycomb should be | | ... | ${node} | ${remote_bd_subtable} | | And LISP mapping from VAT should be @@ -74,7 +81,9 @@ | TC05: Honeycomb configures Lisp - remote mapping - VRF | | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\ | | ... | with VRF. +| | ... | | [Teardown] | Honeycomb removes all lisp mappings | ${node} +| | ... | | Given LISP mappings from Honeycomb should not exist | | ... | ${node} | | And LISP mappings from VAT should not exist @@ -87,7 +96,9 @@ | TC06: Honeycomb configures Lisp - local mapping - Bridge Domain | | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\ | | ... | with a bridge domain. +| | ... | | [Teardown] | Honeycomb removes all lisp mappings | ${node} +| | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | And LISP mappings from Honeycomb should not exist @@ -103,7 +114,9 @@ | TC07: Honeycomb configures Lisp - local mapping - VRF | | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\ | | ... | with VRF. +| | ... | | [Teardown] | Honeycomb removes all lisp mappings | ${node} +| | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | And LISP mappings from Honeycomb should not exist @@ -117,7 +130,9 @@ | TC08: Honeycomb configures Lisp mapping with adjacency | | [Documentation] | Check if Honeycomb can configure local and remote Lisp\ | | ... | mappings with VRF, and configure adjacency. +| | ... | | [Teardown] | Honeycomb removes all lisp mappings | ${node} +| | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | And Honeycomb creates first l2 bridge domain @@ -134,6 +149,7 @@ | TC09: Honeycomb configures Lisp Map Resolver | | [Documentation] | Check if Honeycomb can configure a Lisp Map Resolver. +| | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb adds Lisp Map Resolver | ${node} | ${ip_address} @@ -142,6 +158,7 @@ | TC10: Honeycomb configures Lisp Map Server | | [Documentation] | Check if Honeycomb can configure a Lisp Map Server. +| | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb adds Lisp Map Server | ${node} | @{ip_addresses} @@ -151,6 +168,7 @@ | TC11: Honeycomb configures Lisp PETR configuration | | [Documentation] | Check if Honeycomb can configure Lisp | | ... | PETR configuration. +| | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address} @@ -159,6 +177,7 @@ | TC12: Honeycomb configures Lisp RLOC Probing | | [Documentation] | Check if Honeycomb can configure Lisp RLOC Probing. +| | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb enables LISP RLOC feature | ${node} @@ -167,6 +186,7 @@ | TC13: Honeycomb configures Lisp Map Register | | [Documentation] | Check if Honeycomb can configure a Lisp Map Register. +| | ... | | Given LISP state from Honeycomb should be | ${node} | ${state} | | And LISP state from VAT should be | ${node} | ${state} | | When Honeycomb adds Lisp Map Register | ${node} | ${True} @@ -175,6 +195,7 @@ | TC14: Honeycomb enabled Lisp PITR feature | | [Documentation] | Check if Honeycomb can configure the Lisp PITR feature. +| | ... | | Given Locator Set From Honeycomb Should Be | | ... | ${node} | ${interface} | ${locator_set} | | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set} @@ -183,6 +204,7 @@ | TC15: Honeycomb can remove configuration of Lisp features | | [Documentation] | Check if Honeycomb can disable all Lisp features. +| | ... | | Given Map resolver from Honeycomb should be | ${node} | ${ip_address} | | And PITR config from Honeycomb should be | ${node} | ${locator_set} | | When Honeycomb disables all LISP features | ${node} @@ -191,7 +213,9 @@ | TC16: Honeycomb configures Lisp Map Request Mode | | [Documentation] | Check if Honeycomb can configure Lisp Map Request mode. | | ... | Note: Map Request Mode cannot be removed once configured. +| | ... | | [Teardown] | Honeycomb disables LISP | ${node} +| | ... | | Given Honeycomb enables LISP | ${node} | | When Honeycomb sets Lisp Map Request Mode | ${node} | ${True} | | Then Map Request Mode from Honeycomb should be diff --git a/tests/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot index 068fbcf8a3..03ccc320fc 100644 --- a/tests/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot @@ -21,7 +21,9 @@ | Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot | Variables | resources/test_data/honeycomb/nsh.py | Variables | resources/test_data/honeycomb/vxlan_gpe.py +| ... | Documentation | *Honeycomb NSH test suite.* +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} # disabled pending NSH version 17.04 @@ -30,6 +32,7 @@ *** Test Cases *** | TC01: Honeycomb can configure NSH entry | | [Documentation] | Check if Honeycomb can configure an NSH entry. +| | ... | | Given NSH Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1} | | Then NSH entry from Honeycomb should be @@ -37,6 +40,7 @@ | TC02: Honeycomb can remove NSH entry | | [Documentation] | Check if Honeycomb can remove an existing NSH entry. +| | ... | | Given NSH entry from Honeycomb should be | | ... | ${node} | entry1 | ${nsh_entry1_oper} | | When Honeycomb removes NSH entry | ${node} | entry1 @@ -45,7 +49,9 @@ | TC03: Honeycomb can configure new NSH entry | | [Documentation] | Check if Honeycomb can configure an NSH antry after one\ | | ... | has been deleted. +| | ... | | [Teardown] | Honeycomb removes NSH entry | ${node} | entry2 +| | ... | | Given NSH Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2} | | Then NSH entry from Honeycomb should be @@ -54,7 +60,9 @@ | TC04: Honeycomb can configure multiple NSH entries at the same time | | [Documentation] | Check if Honeycomb can configure an NSH entry when one\ | | ... | already exists. +| | ... | | [Teardown] | Honeycomb clears NSH configuration | ${node} +| | ... | | Given NSH Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1} | | And Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2} @@ -65,6 +73,7 @@ | TC05: Honeycomb can configure NSH map | | [Documentation] | Check if Honeycomb can configure an NSH map. +| | ... | | Given NSH Operational Data From Honeycomb Should Be empty | ${node} | | And Honeycomb creates VxLAN GPE interface | | ... | ${node} | ${vxlan_gpe_if1} @@ -75,6 +84,7 @@ | TC06: Honeycomb can remove NSH map | | [Documentation] | Check if Honeycomb can remove an existing NSH map. +| | ... | | Given NSH entry from Honeycomb should be | | ... | ${node} | entry1 | ${nsh_entry1_oper} | | And VxLAN GPE Operational Data From Honeycomb Should Be @@ -89,7 +99,9 @@ | TC07: Honeycomb can modify existing NSH map | | [Documentation] | Check if Honeycomb can configure an NSH map after one\ | | ... | has been deleted. +| | ... | | [Teardown] | Honeycomb removes NSH map | ${node} | map1_edit +| | ... | | Given NSH map from Honeycomb should not exist | ${node} | map1_edit | | And NSH entry from Honeycomb should be | | ... | ${node} | entry1 | ${nsh_entry1_oper} @@ -105,12 +117,14 @@ | TC08: Honeycomb can configure multiple NSH maps at the same time | | [Documentation] | Check if Honeycomb can configure and NSH map when one\ | | ... | already exists. +| | ... | | [Teardown] | Run Keywords | | ... | Honeycomb clears NSH configuration | ${node} | AND | | ... | Honeycomb removes VxLAN GPE interface | | ... | ${node} | ${vxlan_gpe_if1} | AND | | ... | Honeycomb removes VxLAN GPE interface | | ... | ${node} | ${vxlan_gpe_if2} +| | ... | | Given NSH map from Honeycomb should not exist | ${node} | map2 | | And NSH entry from Honeycomb should be | | ... | ${node} | entry1 | ${nsh_entry1_oper} diff --git a/tests/func/honeycomb/mgmt-cfg-pbb-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-pbb-apihc-apivat-func.robot index 4d7c8a21ef..a04932556a 100644 --- a/tests/func/honeycomb/mgmt-cfg-pbb-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-pbb-apihc-apivat-func.robot @@ -19,9 +19,12 @@ | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/provider_backbone_bridge.robot | Variables | resources/test_data/honeycomb/pbb/pbb.py +| ... | Documentation | *Honeycomb provider backbone bridge test suite.* +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Force Tags | HC_FUNC *** Test Cases *** @@ -29,33 +32,33 @@ | TC01: Honeycomb sets PBB sub-interface | | [Documentation] | Honeycomb creates a new PBB sub-interface. | | ... -| | Honeycomb creates PBB sub interface | ${node} | ${super_if} +| | Honeycomb creates PBB sub-interface | ${node} | ${super_if} | | ... | ${cfg_pbb_sub_if_1} | TC02: Honeycomb modifies existing PBB sub-interface | | [Documentation] | Honeycomb modifies an existing PBB sub-interface. | | ... -| | Honeycomb creates PBB sub interface | ${node} | ${super_if} +| | Honeycomb creates PBB sub-interface | ${node} | ${super_if} | | ... | ${cfg_pbb_sub_if_1_mod} | TC03: Honeycomb deletes existing PBB sub-interface | | [Documentation] | Honeycomb deletes an existing PBB sub-interface. | | ... -| | Honeycomb Removes PBB sub interface +| | Honeycomb removes PBB sub-interface | | ... | ${node} | ${super_if} | TC04: Honeycomb fails to set wrong destination-address for new PBB sub-interface | | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\ | | ... | wrong value of parameter destination-address, type yang:mac-address. | | ... -| | Honeycomb fails to create PBB sub interface | ${node} | ${super_if} +| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} | | ... | ${cfg_pbb_sub_if_wrong_dst_addr} | TC05: Honeycomb fails to set wrong source-address for new PBB sub-interface | | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\ | | ... | wrong value of parameter source-address, type yang:mac-address. | | ... -| | Honeycomb fails to create PBB sub interface | ${node} | ${super_if} +| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} | | ... | ${cfg_pbb_sub_if_wrong_src_addr} | TC06: Honeycomb fails to set wrong b-vlan-tag-vlan-id for new PBB sub-interface @@ -63,7 +66,7 @@ | | ... | wrong value of parameter b-vlan-tag-vlan-id, type uint16, 12 bit\ | | ... | range, range 1..4095. | | ... -| | Honeycomb fails to create PBB sub interface | ${node} | ${super_if} +| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} | | ... | ${cfg_pbb_sub_if_wrong_vlan_tag} | TC07: Honeycomb fails to set wrong i-tag-isid for new PBB sub-interface @@ -71,12 +74,12 @@ | | ... | wrong value of parameter i-tag-isid, type uint32, 24 bit range,\ | | ... | range 1..16777215. | | ... -| | Honeycomb fails to create PBB sub interface | ${node} | ${super_if} +| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} | | ... | ${cfg_pbb_sub_if_wrong_i_tag} | TC08: Honeycomb fails to create new PBB sub-interface without vlan tag | | [Documentation] | Honeycomb fails to create a new PBB sub-interface without\ | | ... | parameter b-vlan-tag-vlan-id. | | ... -| | Honeycomb fails to create PBB sub interface | ${node} | ${super_if} +| | Honeycomb fails to create PBB sub-interface | ${node} | ${super_if} | | ... | ${cfg_pbb_sub_if_no_vlan_tag} diff --git a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot index 7f96472474..f7d92fcc98 100644 --- a/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot @@ -42,10 +42,13 @@ | Library | resources.libraries.python.IPv4Util | Library | resources.libraries.python.IPv6Util | Library | resources.libraries.python.Routing +| ... | Test Setup | Clear Packet Trace on All DUTs | ${nodes} -| Suite Teardown -| ... | Restart Honeycomb and VPP | ${node} +| ... +| Suite Teardown | Restart Honeycomb and VPP | ${node} +| ... | Documentation | *Honeycomb access control lists test suite for ACL plugin.* +| ... | Force Tags | HC_FUNC *** Test Cases *** @@ -58,7 +61,9 @@ | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using different MACs. Receive all packets except those with\ | | ... | MACs in the filtered ranges. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | macip | ${acl_name_macip} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -91,7 +96,9 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv4 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | l3_ip4 | ${acl_name_l3_ip4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -125,7 +132,9 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv6 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | l3_ip6 | ${acl_name_l3_ip6} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -159,7 +168,9 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different ports. Receive all packets except\ | | ... | those with ports in the filtered ranges. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | L4 | ${acl_name_l4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -194,7 +205,9 @@ | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using IPs and ports. Receive all packets except those with\ | | ... | both IPs and ports in the filtered ranges. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | mixed | ${acl_name_mixed} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -226,7 +239,9 @@ | | ... | [Ver] Send ICMP packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with types and codes in the filtered ranges. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | icmp | ${acl_name_icmp} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -259,7 +274,9 @@ | | ... | [Ver] Send ICMPv6 packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup interfaces and bridge domain for plugin-acl test | | ... | icmpv6 | ${acl_name_icmpv6} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -294,7 +311,9 @@ | | ... | to VPP interface 2 and receive it from interface 1(this should create\ | | ... | a reflexive "permit" rule) Finally, send the original packet again\ | | ... | and receive it from interface 2. +| | ... | | [Teardown] | Bridged ACL test teardown +| | ... | | Given Setup Interfaces And Bridge Domain For plugin-acl Test | | ... | reflex | ${acl_name_reflex} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -337,7 +356,9 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv4 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... | | [Teardown] | Routed ACL test teardown - ipv4 +| | ... | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | l3_ip4 | ${acl_name_l3_ip4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -371,7 +392,9 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different IPv6 IPs. Receive all packets except\ | | ... | those with IPs in the filtered ranges and UDP protocol payload. +| | ... | | [Teardown] | Routed ACL test teardown - ipv6 +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py @@ -420,7 +443,9 @@ | | ... | [Ver] Send simple TCP and UDP packets from one TG interface\ | | ... | to the other, using different ports. Receive all packets except\ | | ... | those with ports in the filtered ranges. +| | ... | | [Teardown] | Routed ACL test teardown - ipv4 +| | ... | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | L4 | ${acl_name_l4} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -455,7 +480,9 @@ | | ... | [Ver] Send simple TCP packets from one TG interface to the other,\ | | ... | using IPs and ports. Receive all packets except those with\ | | ... | both IPs and ports in the filtered ranges. +| | ... | | [Teardown] | Routed ACL test teardown - ipv4 +| | ... | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | mixed | ${acl_name_mixed} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -488,7 +515,9 @@ | | ... | [Ver] Send ICMP packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. +| | ... | | [Teardown] | Routed ACL test teardown - ipv4 +| | ... | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | icmp | ${acl_name_icmp} | | When Honeycomb Creates ACL Chain Through ACL plugin @@ -522,7 +551,9 @@ | | ... | [Ver] Send ICMPv6 packets from one TG interface\ | | ... | to the other, using different codes and types. Receive all packets\ | | ... | except those with the filtered type and code. +| | ... | | [Teardown] | Routed ACL test teardown - ipv6 +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Import Variables | resources/test_data/honeycomb/plugin_acl.py @@ -573,7 +604,9 @@ | | ... | to VPP interface 2 and receive it from interface 1(this should create\ | | ... | a reflexive "permit" rule) Finally, send the original packet again\ | | ... | and receive it from interface 2. +| | ... | | [Teardown] | Routed ACL test teardown - ipv4 +| | ... | | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test | | ... | reflex | ${acl_name_reflex} | | And Add ARP on DUT @@ -615,7 +648,9 @@ | Setup interface IPs and routes for IPv4 plugin-acl test | | [Documentation] | Import test variables, set interfaces up, | | ... | configure IPv4 addresses, add neighbor entry and routes. +| | ... | | [Arguments] | ${test_data_id} | ${acl_name} +| | ... | | Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | Import Variables | resources/test_data/honeycomb/plugin_acl.py @@ -637,13 +672,15 @@ | Setup interfaces and bridge domain for plugin-acl test | | [Documentation] | Import test variables, set interfaces up and bridge them. +| | ... | | [Arguments] | ${test_data_id} | ${acl_name} +| | ... | | Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | Import Variables | resources/test_data/honeycomb/plugin_acl.py | | ... | ${test_data_id} | ${acl_name} -| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if1} | up -| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if2} | up +| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up | | Honeycomb Creates first L2 Bridge Domain | | ... | ${dut_node} | ${bd_name} | ${bd_settings} | | Honeycomb Adds Interfaces To Bridge Domain @@ -653,26 +690,29 @@ | Bridged ACL test teardown | | [Documentation] | Log packet trace and ACL settings, | | ... | then clean up bridge domains. +| | ... | | Show Packet Trace on All DUTs | ${nodes} | | Read plugin-ACL configuration from VAT | ${node} -| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} +| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} | | Honeycomb Removes All Bridge Domains | | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} | Routed ACL test teardown - ipv4 | | [Documentation] | Log packet trace and ACL settings, | | ... | then clean up IPv4 addresses and neighbors. +| | ... | | Show Packet Trace on All DUTs | ${nodes} | | Read plugin-ACL configuration from VAT | ${node} -| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} +| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} | | Honeycomb removes interface IPv4 addresses | ${node} | ${dut_to_tg_if1} | | Honeycomb clears all interface IPv4 neighbors | ${node} | ${dut_to_tg_if1} | Routed ACL test teardown - ipv6 | | [Documentation] | Log packet trace and ACL settings, | | ... | then clean up IPv6 addresses and neighbors. +| | ... | | Show Packet Trace on All DUTs | ${nodes} -| | Clear plugin-acl Settings | ${node} | ${dut_to_tg_if1} +| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1} | | Read plugin-ACL configuration from VAT | ${node} | | Honeycomb removes interface IPv6 addresses | ${node} | ${dut_to_tg_if1} | | Honeycomb clears all interface IPv6 neighbors | ${node} | ${dut_to_tg_if1} diff --git a/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot index d9b6aaaa9c..1fe4847f23 100644 --- a/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-policer-apihc-func.robot @@ -29,15 +29,19 @@ | Resource | resources/libraries/robot/testing_path.robot | Library | resources.libraries.python.Trace | Variables | resources/test_data/honeycomb/policer_variables.py +| ... | Suite Teardown | ... | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Force Tags | HC_FUNC +| ... | Documentation | *Honeycomb Policer management test suite.* *** Test Cases *** | TC01: Honeycomb can configure Policer | | [Documentation] | Checks if Honeycomb can configure Policer. +| | ... | | Given Policer Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb configures Policer | ${node} | ${policer_data} | | Then Policer Operational Data From Honeycomb Should Be | ${node} @@ -45,6 +49,7 @@ | TC02: Honeycomb can disable Policer | | [Documentation] | Checks if Honeycomb can disable Policer. +| | ... | | Given Policer Operational Data From Honeycomb Should Be | ${node} | | ... | ${policer_data_oper} | | When Honeycomb removes Policer configuration | ${node} @@ -53,7 +58,9 @@ | TC03: Honeycomb can configure Policer with increased values of CIR (900kbps) | | [Documentation] | Checks if Honeycomb can configure Policer\ | | ... | with increased values of CIR. +| | ... | | [Teardown] | Tear down policer test | ${node} +| | ... | | Given Policer Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb configures Policer | ${node} | ${policer_data_2} | | Then Policer Operational Data From Honeycomb Should Be | ${node} @@ -62,23 +69,26 @@ | TC04: Honeycomb can configure Packets-Per-Second Based Policer | | [Documentation] | Checks if Honeycomb can configure Policer\ | | ... | based on rate-type measured in pps. +| | ... | | [Teardown] | Tear down policer test | ${node} +| | ... | | Given Policer Operational Data From Honeycomb Should Be empty | ${node} | | When Honeycomb configures Policer | ${node} | ${policer_data_3} | | Then Policer Operational Data From Honeycomb Should Be | ${node} | | ... | ${policer_data_oper_3} | TC05: Configure Policer on Interface -| | [Documentation] | Honeycomb can configure Policer\ -| | ... | on a given interface. +| | [Documentation] | Honeycomb can configure Policer on a given interface. +| | ... | | [Teardown] | Run Keywords | | ... | Honeycomb disables Policer on interface | ${node} | ${interface} | AND -| | ... | Honeycomb removes ACL session -| | ... | ${node} | ${acl_tables['hc_acl_table']['name']} +| | ... | Honeycomb removes ACL session | ${node} +| | ... | ${acl_tables['hc_acl_table']['name']} | | ... | ${acl_tables['hc_acl_session']['match']} | AND | | ... | Honeycomb removes ACL table | ${node} | | ... | ${acl_tables['hc_acl_table']['name']} | AND | | ... | Tear down policer test | ${node} +| | ... | | Given Honeycomb configures Policer | ${node} | ${policer_data} | | And ACL table from Honeycomb should not exist | | ... | ${node} | ${acl_tables['hc_acl_table']['name']} @@ -99,7 +109,9 @@ | | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\ | | ... | Packet on DUT1 is marked with DSCP tag. Verifies if DUT1 sends\ | | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG. +| | ... | | [Teardown] | Show Packet Trace on All DUTs | ${nodes} +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Honeycomb configures Policer | ${dut_node} | ${policer_data_3} @@ -112,8 +124,10 @@ | | ... | ${acl_tables['hc_acl_session']} | | And Honeycomb enables policer on interface | | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_tables['hc_acl_table']['name']} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} +| | ... | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} +| | ... | up | | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} | | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} diff --git a/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot index 056771512f..26f73b054c 100644 --- a/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-proxyarp-apihc-func.robot @@ -30,24 +30,31 @@ | Resource | resources/libraries/robot/ipv4.robot | Resource | resources/libraries/robot/traffic.robot | Library | resources.libraries.python.Trace +| ... | Suite Teardown | ... | Run Keyword If Any Tests Failed | ... | Restart Honeycomb And VPP | ${node} +| ... | Force Tags | HC_FUNC +| ... | Documentation | *Honeycomb proxyARP management test suite.* *** Test Cases *** # TODO: Add operational data and VAT dump verification if/when avaliable | TC01: Honeycomb can configure ipv4 proxyARP | | [Documentation] | Check if Honeycomb can configure the proxyARP feature. +| | ... | | [Teardown] | Honeycomb removes proxyARP configuration | ${node} +| | ... | | Honeycomb configures proxyARP | ${node} | ${proxyarp_settings_ipv4} | TC02: Honeycomb can enable proxyarp on an interface | | [Documentation] | Check if Honeycomb can enable the proxyARP feature\ | | ... | on an interface. +| | ... | | [Teardown] | Honeycomb disables proxyARP on interface | | ... | ${node} | ${interface} +| | ... | | Honeycomb enables proxyARP on interface | ${node} | ${interface} | TC03: DUT sends ARP reply on behalf of another machine from the IP range @@ -59,6 +66,7 @@ | | ... | [Ver] Make TG send ARP request to DUT1 interface, | | ... | verify if DUT1 sends correct ARP reply on behalf of machine whose | | ... | IP is in the configured range. +| | ... | | [Teardown] | Run Keywords | | ... | Show Packet Trace on all DUTs | ${nodes} | | ... | AND | Honeycomb removes proxyARP configuration | ${node} @@ -66,6 +74,7 @@ | | ... | ${dut_node} | ${dut_to_tg_if1} | down | | ... | AND | Honeycomb removes interface IPv4 addresses | | ... | ${node} | ${interface} +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | ${dut_to_tg_name}= | Get interface name | ${dut_node} | ${dut_to_tg_if1} @@ -76,5 +85,5 @@ | | When Honeycomb configures proxyARP | ${dut_node} | ${proxyarp_settings_ipv4} | | And Honeycomb enables proxyARP on interface | ${node} | ${dut_to_tg_name} | | Then Send ARP Request | ${tg_node} | ${tg_to_dut_name} -| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} -| | ... | ${tg_to_dut_ip} | ${test_ip} +| | ... | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac} +| | ... | ${tg_to_dut_ip} | ${test_ip} diff --git a/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot index abc03c04f4..6c718e705a 100644 --- a/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-proxynd6-apihc-func.robot @@ -34,15 +34,20 @@ | Resource | resources/libraries/robot/traffic.robot | Resource | resources/libraries/robot/dhcp_proxy.robot | Library | resources.libraries.python.Trace +| ... | Test Setup | Clear Packet Trace on All DUTs | ${nodes} +| ... | Suite Teardown | Restart Honeycomb And VPP | ${node} +| ... | Force Tags | HC_FUNC +| ... | Documentation | *Honeycomb IPv6 neighbor discovery proxy test suite.* *** Test Cases *** | TC01: Honeycomb can configure IPv6 ND proxy on an interface | | [Documentation] | Check if Honeycomb can configure the IPv6 ND proxy\ | | ... | feature on an interface. +| | ... | | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface} | | And Honeycomb configures interface state | ${node} | ${interface} | up | | When Honeycomb configures IPv6 ND proxy on interface @@ -53,6 +58,7 @@ | TC02: Honeycomb can disable IPv6 ND proxy on an interface | | [Documentation] | Check if Honeycomb can remove IPv6 ND proxy feature\ | | ... | configuration from an interface. +| | ... | | Given IPv6 ND proxy from Honeycomb should be | | ... | ${node} | ${interface} | ${test_dst_ip} | | When Honeycomb disables IPv6 ND proxy on interface | ${node} | ${interface} @@ -61,8 +67,10 @@ | TC03: Honeycomb can configure multiple IPv6 ND proxies on an interface | | [Documentation] | Check if Honeycomb can configure two ND proxies\ | | ... | on one interface. +| | ... | | [Teardown] | Honeycomb disables IPv6 ND proxy on interface | | ... | ${node} | ${interface} +| | ... | | Given IPv6 ND proxy from Honeycomb should be empty | ${node} | ${interface} | | And Honeycomb configures interface state | ${node} | ${interface} | up | | When Honeycomb configures IPv6 ND proxy on interface @@ -85,6 +93,7 @@ | | ... | Show Packet Trace on All DUTs | ${nodes} | AND | | ... | Honeycomb disables IPv6 ND proxy on interface | | ... | ${dut_node} | ${dut_to_tg_if2} +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up diff --git a/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot index e0544f71bb..be151c347a 100644 --- a/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot @@ -21,11 +21,15 @@ | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Resource | resources/libraries/robot/honeycomb/routing.robot +| ... | Test Setup | Clear Packet Trace on All DUTs | ${nodes} +| ... | Suite Teardown | Restart Honeycomb And VPP | ${node} -| Test Teardown | Honeycomb routing test teardown -| ... | ${node} | ${table} +| ... +| Test Teardown | Honeycomb routing test teardown | ${node} | ${table} +| ... | Documentation | *Honeycomb routing test suite.* +| ... | Force Tags | HC_FUNC *** Test Cases *** @@ -37,6 +41,7 @@ | | ... | interfaces and configure route with TG-if2 as next-hop. | | ... | [Ver] Send ICMP packet from first TG interface to configured route | | ... | destination. Receive packet on the second TG interface. +| | ... | | ${table}= | Set Variable | table1 | | Given Setup interfaces and neighbors for IPv4 routing test | | When Honeycomb configures routing table @@ -58,6 +63,7 @@ | | ... | route destination. Receive all packets on the second TG interface and\ | | ... | verify that each destination MAC was used by exactly 50 packets. | | ... | Receive packet on the second TG interface. +| | ... | | ${table}= | Set Variable | table2 | | Given Setup interfaces and neighbors for IPv4 routing test | | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2} @@ -83,6 +89,7 @@ | | ... | [Ver] Send ICMP packet from first TG interface to configured route | | ... | destination. Make sure no packet is received on the second TG\ | | ... | interface. +| | ... | | ${table}= | Set Variable | table3 | | Given Setup interfaces and neighbors for IPv4 routing test | | When Honeycomb configures routing table @@ -103,6 +110,7 @@ | | ... | interfaces and configure route with TG-if2 as next-hop. | | ... | [Ver] Send ICMP packet from first TG interface to configured route | | ... | destination. Receive packet on the second TG interface. +| | ... | | ${table}= | Set Variable | table4 | | Given Setup interfaces and neighbors for IPv6 routing test | | When Honeycomb configures routing table @@ -124,6 +132,7 @@ | | ... | route destination. Receive all packets on the second TG interface and\ | | ... | verify that each destination MAC was used by exactly 50 packets. | | ... | Receive packet on the second TG interface. +| | ... | | ${table}= | Set Variable | table5 | | Given Setup interfaces and neighbors for IPv6 routing test | | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2} @@ -149,6 +158,7 @@ | | ... | [Ver] Send ICMP packet from first TG interface to configured route | | ... | destination. Make sure no packet is received on the second TG\ | | ... | interface. +| | ... | | ${table}= | Set Variable | table6 | | Given Setup interfaces and neighbors for IPv6 routing test | | When Honeycomb configures routing table @@ -202,13 +212,17 @@ | | Vpp all ra suppress link layer | ${nodes} | Honeycomb routing test teardown +| | ... | | [arguments] | ${node} | ${routing_table} +| | ... | | Show Packet Trace on All DUTs | ${nodes} | | Log routing configuration from VAT | ${node} | | Honeycomb removes routing configuration | ${node} | ${routing_table} | Setup vrf IDs +| | ... | | [Arguments] | ${node} | ${interface} | ${vrf} +| | ... | | Honeycomb sets interface VRF ID | | ... | ${node} | ${interface} | ${vrf} | ipv4 | | Honeycomb sets interface VRF ID diff --git a/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot b/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot index abcd86e95d..c5533c27d0 100644 --- a/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot @@ -22,16 +22,21 @@ | Resource | resources/libraries/robot/honeycomb/slaac.robot | Resource | resources/libraries/robot/testing_path.robot | Resource | resources/libraries/robot/traffic.robot +| ... | Suite Teardown | ... | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Force Tags | HC_FUNC +| ... | Documentation | *Honeycomb SLAAC management test suite.* +| ... | Variables | resources/test_data/honeycomb/slaac_variables.py *** Test Cases *** | TC01: Honeycomb can configure SLAAC | | [Documentation] | Checks if Honeycomb can congigure SLAAC. +| | ... | | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} | | ... | ${interface} | | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up @@ -43,6 +48,7 @@ | TC02: Honeycomb can disable SLAAC | | [Documentation] | Checks if Honeycomb can disable SLAAC. +| | ... | | Given SLAAC Operational Data From Honeycomb Should Be | ${node} | | ... | ${interface} | ${slaac_data} | | When Honeycomb removes SLAAC configuration | ${node} | ${interface} @@ -51,7 +57,9 @@ | TC03: Honeycomb can configure SLAAC with suppress link layer disabled | | [Documentation] | Checks if Honeycomb can congigure SLAAC. +| | ... | | [Teardown] | SLAAC test teardown | ${node} | ${interface} +| | ... | | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} | | ... | ${interface} | | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up @@ -64,41 +72,47 @@ | TC04: Honeycomb can configure SLAAC with sending RA packets disabled | | [Documentation] | Checks if Honeycomb can configure SLAAC\ | | ... | with given settings. +| | ... | | [Teardown] | SLAAC test teardown | ${node} | ${interface} +| | ... | | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} | | ... | ${interface} | | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up | | And Honeycomb sets interface IPv6 address | ${node} | ${interface} | | ... | ${address} | ${prefix} | | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_01} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} | ${interface} -| | ... | ${slaac_data_01} +| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} +| | ... | ${interface} | ${slaac_data_01} | TC05: Honeycomb can configure SLAAC with min interval values | | [Documentation] | Checks if Honeycomb can configure SLAAC\ | | ... | with given settings. +| | ... | | [Teardown] | SLAAC test teardown | ${node} | ${interface} +| | ... | | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} | | ... | ${interface} | | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up | | And Honeycomb sets interface IPv6 address | ${node} | ${interface} | | ... | ${address} | ${prefix} | | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_02} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} | ${interface} -| | ... | ${slaac_data_02} +| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} +| | ... | ${interface} | ${slaac_data_02} | TC06: Honeycomb can configure SLAAC with max interval values | | [Documentation] | Checks if Honeycomb can configure SLAAC\ | | ... | with given settings. +| | ... | | [Teardown] | SLAAC test teardown | ${node} | ${interface} +| | ... | | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node} | | ... | ${interface} | | And InterfaceAPI.Set Interface State | ${node} | ${interface} | up | | And Honeycomb sets interface IPv6 address | ${node} | ${interface} | | ... | ${address} | ${prefix} | | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_03} -| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} | ${interface} -| | ... | ${slaac_data_03} +| | Then SLAAC Operational Data From Honeycomb Should Be | ${node} +| | ... | ${interface} | ${slaac_data_03} | TC07: DUT retransmits RA on IPv6 enabled interface after a set interval | | [Documentation] @@ -106,12 +120,15 @@ | | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG. | | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\ | | ... | to be sent by DUT1 and verify the received RA packets are correct. +| | ... | | [Teardown] | SLAAC test teardown | ${dut_node} | ${dut_to_tg_if1} +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Honeycomb sets interface IPv6 address | | ... | ${dut_node} | ${dut_to_tg_if1} | ${address} | ${prefix} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} +| | ... | up | | When Honeycomb configures SLAAC | ${dut_node} | ${dut_to_tg_if1} | | ... | ${slaac_data} | | :FOR | ${n} | IN RANGE | ${2} diff --git a/tests/func/honeycomb/mgmt-cfg-snat44-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-snat44-apihc-apivat-func.robot index d765f1e4e9..3c6be394c3 100644 --- a/tests/func/honeycomb/mgmt-cfg-snat44-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-snat44-apihc-apivat-func.robot @@ -19,14 +19,18 @@ | Resource | resources/libraries/robot/honeycomb/nat.robot | Resource | resources/libraries/robot/honeycomb/honeycomb.robot | Variables | resources/test_data/honeycomb/nat.py | ${node} | ${interface} +| ... | Documentation | *Honeycomb NAT test suite.* +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Force Tags | HC_FUNC *** Test Cases *** | TC01: Honeycomb configures NAT entry | | [Documentation] | Honeycomb configures a static NAT entry. +| | ... | | Given NAT Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${nat_empty} | | When Honeycomb Configures NAT Entry | ${node} | ${entry1} @@ -34,6 +38,7 @@ | TC02: Honeycomb removes NAT entry | | [Documentation] | Honeycomb removes a configured static NAT entry. +| | ... | | Given NAT Entries From Honeycomb Should Be | ${node} | ${entry1} | | When Honeycomb Configures NAT Entry | ${node} | ${NONE} | | Then NAT Operational Data From Honeycomb Should Be empty @@ -41,7 +46,9 @@ | TC03: Honeycomb configures multiple NAT entries | | [Documentation] | Honeycomb configures two static NAT entries. +| | ... | | [Teardown] | Honeycomb Configures NAT Entry | ${node} | ${NONE} +| | ... | | Given NAT Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${nat_empty} | | When Honeycomb Configures NAT Entry | ${node} | ${entry1} | ${0} | ${1} @@ -52,6 +59,7 @@ | TC04: Honeycomb enables NAT on interface - inbound | | [Documentation] | Honeycomb configures NAT on an interface\ | | ... | in inbound direction. +| | ... | | Given NAT Interface Operational Data From Honeycomb Should Be Empty | | ... | ${node} | ${interface} | inbound | | And NAT Interface Operational Data From Honeycomb Should Be Empty @@ -65,6 +73,7 @@ | TC05: Honeycomb removes NAT interface configuration | | [Documentation] | Honeycomb removes NAT configuration from an interface. +| | ... | | Given NAT Interface Operational Data From Honeycomb Should Be | | ... | ${node} | ${interface} | inbound | | And NAT Interface Operational Data From Honeycomb Should Be empty @@ -79,8 +88,10 @@ | TC06: Honeycomb enables NAT on interface - outbound | | [Documentation] | Honeycomb configures NAT on an interface\ | | ... | in outbound direction. +| | ... | | [Teardown] | Honeycomb removes NAT interface configuration | | ... | ${node} | ${interface} | outbound +| | ... | | Given NAT Interface Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${interface} | inbound | | And NAT Interface Operational Data From Honeycomb Should Be empty diff --git a/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot index b2adb871c5..e7fe2eb94e 100644 --- a/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-spanrx-apihc-apivat-func.robot @@ -24,9 +24,13 @@ | ... | ${node['interfaces']['port3']['name']} | ... | local0 | Variables | resources/test_data/honeycomb/sub_interfaces.py +| ... | Force Tags | HC_FUNC +| ... | Suite Setup | Add Interface local0 To Topology | ${node} +| ... | Suite Teardown | Restart Honeycomb and VPP | ${node} +| ... | Documentation | *Honeycomb port mirroring test suite.* *** Test Cases *** @@ -86,6 +90,7 @@ | | ... | ${node} | ${interface1} | AND | | ... | Honeycomb removes interface SPAN configuration | | ... | ${node} | ${interface2} +| | ... | | When Honeycomb configures SPAN on interface | | ... | ${node} | ${interface1} | ${settings_if2} | | And Honeycomb configures SPAN on interface @@ -112,10 +117,13 @@ | | ... | ${dut_node} | ${dut_to_tg_if1} | AND | | ... | Honeycomb removes interface SPAN configuration | | ... | ${node} | ${dut_to_tg_if2} +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} +| | ... | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} +| | ... | up | | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} | | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix} | | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1} @@ -196,6 +204,7 @@ | | ... | ${node} | ${interface1} | ${1} | AND | | ... | Honeycomb removes sub-interface SPAN configuration | | ... | ${node} | ${interface2} | ${1} +| | ... | | Given Honeycomb creates sub-interface | ${node} | ${interface2} | | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings} | | When Honeycomb Configures SPAN on sub-interface @@ -218,12 +227,15 @@ | | ... | on the sub-interface. | | ... | | [Teardown] | Show Packet Trace on All DUTs | ${nodes} +| | ... | | Given Configure path in 2-node circular topology | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} | | And Sub-interface state from Honeycomb should be | | ... | ${dut_node} | ${interface1} | ${1} | down | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up -| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} +| | ... | up +| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} +| | ... | up | | And Honeycomb sets the sub-interface up | | ... | ${dut_node} | ${dut_to_tg_if1} | ${1} | | And Honeycomb sets interface IPv4 address with prefix | ${dut_node} diff --git a/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot index 409eb13d21..7d0f5af665 100644 --- a/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot @@ -32,14 +32,18 @@ | Resource | resources/libraries/robot/honeycomb/vxlan.robot # import additional VxLAN settings from resource file | Variables | resources/test_data/honeycomb/vxlan.py +| ... | Force Tags | HC_FUNC +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} +| ... | Documentation | *Honeycomb VxLAN management test suite.* *** Test Cases *** | TC01: Honeycomb configures VxLAN tunnel | | [Documentation] | Check if Honeycomb API can configure VxLAN settings. +| | ... | | Given VxLAN Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${vx_interface} | | And VxLAN Operational Data From VAT Should Be empty | ${node} @@ -55,6 +59,7 @@ | TC02: Honeycomb disables VxLAN tunnel | | [Documentation] | Check if Honeycomb API can reset VxLAN configuration. +| | ... | | Given VxLAN Operational Data From Honeycomb Should Be | | ... | ${node} | ${vx_interface} | ${vxlan_settings} | | And Honeycomb should not show disabled interface in oper data @@ -71,8 +76,10 @@ | TC03: Honeycomb can configure VXLAN tunnel after one has been disabled | | [Documentation] | Check if Honeycomb API can configure VxLAN settings again\ | | ... | after previous settings have been removed. +| | ... | | [Teardown] | Honeycomb removes VxLAN tunnel settings | | ... | ${node} | ${vx_interface} +| | ... | | Given VxLAN Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${vx_interface} | | And Honeycomb should show disabled interface in oper data @@ -90,6 +97,7 @@ | TC04: Honeycomb does not set VxLAN configuration on another interface type | | [Documentation] | Check if Honeycomb API prevents setting VxLAN\ | | ... | on incorrect interface. +| | ... | | Given VxLAN Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${interface} | | And VxLAN Operational Data From VAT Should Be empty | ${node} @@ -103,6 +111,7 @@ | TC05: Honeycomb does not set invalid VxLAN configuration | | [Documentation] | Check if Honeycomb API prevents setting incorrect VxLAN\ | | ... | settings. +| | ... | | Given VxLAN Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${vx_interface} | | And VxLAN Operational Data From VAT Should Be empty | ${node} @@ -114,8 +123,10 @@ | TC06: Honeycomb configures VxLAN tunnel with ipv6 | | [Documentation] | Check if Honeycomb API can configure VxLAN with\ | | ... | ipv6 settings. +| | ... | | [Teardown] | Honeycomb removes VxLAN tunnel settings | | ... | ${node} | ${vx_interface} +| | ... | | Given VxLAN Operational Data From Honeycomb Should Be empty | | ... | ${node} | ${vx_interface} | | And VxLAN Operational Data From VAT Should Be empty | ${node} diff --git a/tests/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot index 253cd6ab05..8dd884af71 100644 --- a/tests/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot +++ b/tests/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot @@ -38,10 +38,12 @@ | Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot # Import additional VxLAN GPE settings from resource file | Variables | resources/test_data/honeycomb/vxlan_gpe.py +| ... | Documentation | *Honeycomb VxLAN-GPE management test suite.* -| Force Tags | HC_FUNC -| Suite Setup -| ... | Restart Honeycomb and VPP | ${node} +| ... +#| Force Tags | HC_FUNC +| ... +| Suite Setup | Restart Honeycomb and VPP | ${node} *** Test Cases *** | TC01: Honeycomb creates VxLAN GPE tunnel diff --git a/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot b/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot index 7daa08bc85..2f834ac4b6 100644 --- a/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot +++ b/tests/func/honeycomb/mgmt-notif-apihcnc-func.robot @@ -24,13 +24,17 @@ | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Resource | resources/libraries/robot/honeycomb/tap.robot | Resource | resources/libraries/robot/honeycomb/notifications.robot +| ... | Suite Setup | Run keywords | ... | Honeycomb configures interface state | ... | ${node} | ${interface} | down | AND | ... | Honeycomb creates TAP interface | ... | ${node} | ${tap_interface} | ${tap_settings} +| ... | Documentation | *Honeycomb notifications test suite.* +| ... | Force Tags | HC_FUNC +| ... | Suite Teardown | Run Keyword If Any Tests Failed | ... | Restart Honeycomb and VPP | ${node} @@ -38,6 +42,7 @@ | TC01: Honeycomb sends notification on interface state change | | [Documentation] | Check if Honeycomb sends a state-changed notification\ | | ... | when the state of an interface is changed. +| | ... | | Given Interface state from Honeycomb should be | | ... | ${node} | ${interface} | down | | And Interface state from VAT should be | ${node} | ${interface} | down @@ -50,6 +55,7 @@ | TC02: Honeycomb sends notification on interface deletion | | [Documentation] | Check if Honeycomb sends an interface-deleted notification | | ... | when an interface is deleted. +| | ... | | Given TAP Operational Data From Honeycomb Should Be | | ... | ${node} | ${tap_interface} | ${tap_settings} | | And TAP Operational Data From VAT Should Be diff --git a/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot b/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot index f5f9673230..90ed077533 100644 --- a/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot +++ b/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot @@ -21,11 +21,15 @@ | Resource | resources/libraries/robot/honeycomb/interfaces.robot | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot | Resource | resources/libraries/robot/honeycomb/l2_fib.robot +| ... | Suite Setup | Run Keywords | ... | Configure Persistence | ${node} | enable | AND | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| ... | Suite Teardown | Configure Persistence | ${node} | disable +| ... | Force Tags | HC_PERSIST | HC_REST_ONLY +| ... | Documentation | *Honeycomb configuration persistence test suite.* *** Test Cases *** @@ -34,21 +38,27 @@ | TC01: Honeycomb persists configuration through restart of both Honeycomb and VPP | | [Documentation] | Checks if Honeycomb maintains configuration after both\ | | ... | Restart Honeycomb and VPP. +| | ... | | [Tags] | HC_FUNC +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Multi-Feature Persistence test configuration | ${node} | ${interface} | | And Multi-Feature persistence Test Verification | ${node} | ${interface} | | And Log persisted configuration on node | ${node} -| | When Restart Honeycomb and VPP | ${node} +| | When Restart Honeycomb and VPP in pesistence test | ${node} | | Then Multi-Feature persistence Test Verification | ${node} | ${interface} | TC02: Honeycomb reverts to defaults if persistence files are invalid | | [Documentation] | Checks if Honeycomb reverts to default configuration when\ | | ... | persistence files are damaged or invalid. +| | ... | | [Tags] | HC_FUNC +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Multi-Feature Persistence test configuration | ${node} | ${interface} | | And Multi-Feature persistence Test Verification | ${node} | ${interface} | | When Persistence file is damaged during restart | ${node} @@ -57,8 +67,10 @@ | TC03: Honeycomb persists configuration through restart of Honeycomb | | [Documentation] | Checks if Honeycomb maintains configuration after it\ | | ... | is restarted. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Multi-Feature Persistence test configuration | ${node} | ${interface} | | And Multi-Feature persistence Test Verification | ${node} | ${interface} | | And Log persisted configuration on node | ${node} @@ -68,8 +80,10 @@ | TC04: Honeycomb persists configuration through restart of VPP | | [Documentation] | Checks if Honeycomb updates VPP settings after VPP is\ | | ... | restarted. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Multi-Feature Persistence test configuration | ${node} | ${interface} | | And Multi-Feature persistence Test Verification | ${node} | ${interface} | | And Log persisted configuration on node | ${node} @@ -82,18 +96,22 @@ | TC05: Persist configuration of IP addresses and neighbors - HC and VPP restart | | [Documentation] | Verify persistence of interface state, IPv4 address | | ... | and neighbor entries through restart of both Honeycomb and VPP. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Interface Persistence Setup | ${node} | | And Interface Persistence Check | ${node} -| | When Restart Honeycomb and VPP | ${node} +| | When Restart Honeycomb and VPP in pesistence test | ${node} | | Then Interface Persistence Check | ${node} | TC06: Persist configuration of IP addresses and neighbors - HC restart | | [Documentation] | Verify persistence of interface state, IPv4 address | | ... | and neighbor entries through restart of Honeycomb. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Interface Persistence Setup | ${node} | | And Interface Persistence Check | ${node} | | When Restart Honeycomb | ${node} @@ -102,8 +120,10 @@ | TC07: Persist configuration of IP addresses and neighbors - VPP restart | | [Documentation] | Verify persistence of interface state, IPv4 address | | ... | and neighbor entries through restart of VPP. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Interface Persistence Setup | ${node} | | And Interface Persistence Check | ${node} | | When Restart VPP | ${node} @@ -113,18 +133,22 @@ | | [Documentation] | Verify persistence of bridge domain, L2-FIB entry | | ... | and Bridge domain Operational Interface Assignment through restart | | ... | of both Honeycomb and VPP. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Bridge Domain Persistence Setup | ${node} -| | When Restart Honeycomb and VPP | ${node} +| | When Restart Honeycomb and VPP in pesistence test | ${node} | | Then Bridge Domain Persistence Check | ${node} | TC09: Honeycomb persists configuration of bridge domains - HC restart | | [Documentation] | Verify persistence of bridge domain, L2-FIB entry | | ... | and Bridge domain Operational Interface Assignment through restart | | ... | of Honeycomb. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Bridge Domain Persistence Setup | ${node} | | When Restart Honeycomb | ${node} | | Then Bridge Domain Persistence Check | ${node} @@ -133,8 +157,10 @@ | | [Documentation] | Verify persistence of bridge domain, L2-FIB entry | | ... | and Bridge domain Operational Interface Assignment through restart | | ... | of VPP. +| | ... | | [Teardown] | | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node} +| | ... | | Given Bridge Domain Persistence Setup | ${node} | | When Restart VPP | ${node} | | Then Bridge Domain Persistence Check | ${node} -- cgit 1.2.3-korg