From c1bf0a18260813cc9ca57d27bb2419f8654a9ed3 Mon Sep 17 00:00:00 2001 From: Zdeno Olsovsky Date: Tue, 18 Oct 2016 11:40:11 +0200 Subject: CSIT-450: Refactor LISP files -change file names to appropriate -move tests to appropriate files Change-Id: Icadd7b8dcee503f4026d340bbfdba488145b8c9d Signed-off-by: Zdeno Olsovsky --- tests/func/lisp/lisp_ipv4_ipsec_ipv6.robot | 262 ----------------------------- 1 file changed, 262 deletions(-) delete mode 100644 tests/func/lisp/lisp_ipv4_ipsec_ipv6.robot (limited to 'tests/func/lisp/lisp_ipv4_ipsec_ipv6.robot') diff --git a/tests/func/lisp/lisp_ipv4_ipsec_ipv6.robot b/tests/func/lisp/lisp_ipv4_ipsec_ipv6.robot deleted file mode 100644 index 8b5ba11a29..0000000000 --- a/tests/func/lisp/lisp_ipv4_ipsec_ipv6.robot +++ /dev/null @@ -1,262 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.IPsecUtil -| Library | resources.libraries.python.VatJsonUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.QemuUtils -| Library | String -| Resource | resources/libraries/robot/traffic.robot -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/ipv6.robot -| Resource | resources/libraries/robot/ipsec.robot -| Resource | resources/libraries/robot/qemu.robot -| Resource | resources/libraries/robot/lisp/lispgpe.robot -| Resource | resources/libraries/robot/bridge_domain.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP -| ... -| Test Setup | Run Keywords | Setup all DUTs before test -| ... | AND | Setup all TGs before traffic script -| ... | AND | Update All Interface Data On All Nodes | ${nodes} -| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| ... | AND | Show vpp trace dump on all DUTs -| ... | AND | VPP Show Errors | ${nodes['DUT1']} -| ... | AND | VPP Show Errors | ${nodes['DUT2']} -| ... -| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:*Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ -| ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ -| ... | DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | ${lisp_gpe_int} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\ -| | ... | between two vhosts. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | VPP Show Errors | ${nodes['DUT1']} -| | ... | AND | VPP Show Errors | ${nodes['DUT2']} -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Setup Qemu DUT1 -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC04: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6, on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | VPP Show Errors | ${nodes['DUT1']} -| | ... | AND | VPP Show Errors | ${nodes['DUT2']} -| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node} -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Setup Qemu DUT1 -| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | ${lisp_gpe_int} -| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut2_node} | ${lisp_gpe_int} -| | And IPsec Generate Keys | ${encr_alg} | ${auth_alg} -| | When VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And VPP Setup IPsec Manual Keyed Connection -| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send Packet And Check Headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send Packet And Check Headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Topology And Lisp -| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ -| | ... | and then setup LISP. -| | Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Interfaces in 3-node path are up -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} -| | ... | ${prefix4} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} -| | ... | ${prefix4} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} -| | ... | ${tg_to_dut1_mac} -| | Set up LISP GPE topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip_static_adjacency} -| | ... | ${dut2_to_dut1_ip_static_adjacency} - -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup\ -| | ... | Qemu and bridge the vhosts. -| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE} -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Interface is added to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2} -- cgit 1.2.3-korg