From 1942363fa62b6a079ae5552d20c90eb55f0033d9 Mon Sep 17 00:00:00 2001 From: Zdeno Olsovsky Date: Thu, 28 Jul 2016 15:04:54 +0200 Subject: CSIT-237: VPN routed forwarding (VRF) - baseline for IPv6 Change-Id: I5c3053c692df29255a1da22a66f7ac282e3d5624 Signed-off-by: Zdeno Olsovsky --- tests/func/vrf/vrf_tests.robot | 2 +- tests/func/vrf/vrf_tests_v6.robot | 409 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 410 insertions(+), 1 deletion(-) create mode 100644 tests/func/vrf/vrf_tests_v6.robot (limited to 'tests/func/vrf') diff --git a/tests/func/vrf/vrf_tests.robot b/tests/func/vrf/vrf_tests.robot index 239900c1eb..74696135b1 100644 --- a/tests/func/vrf/vrf_tests.robot +++ b/tests/func/vrf/vrf_tests.robot @@ -25,7 +25,7 @@ | Test Setup | Run Keywords | Setup all DUTs before test | ... | AND | Setup all TGs before traffic script | Test Teardown | Show Packet Trace on All DUTs | ${nodes} -| Documentation | *Vpn routed forwarding - baseline* +| Documentation | *Vpn routed forwarding - baseline IPv4* | ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two | ... | links in between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of diff --git a/tests/func/vrf/vrf_tests_v6.robot b/tests/func/vrf/vrf_tests_v6.robot new file mode 100644 index 0000000000..b5dd18d50d --- /dev/null +++ b/tests/func/vrf/vrf_tests_v6.robot @@ -0,0 +1,409 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO +| Test Setup | Run Keywords | Setup all DUTs before test +| ... | AND | Setup all TGs before traffic script +| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| ... | AND | Show vpp trace dump on all DUTs +| Documentation | *Vpn routed forwarding - baseline IPv6* +| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two +| ... | links in between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 +| ... | *[Cfg] DUT configuration:* Each DUT is configured with two VRF tables; +| ... | Separation of traffic is tested by IP packets; Neighbors and Routes are +| ... | set on DUT nodes; IP addresses are set on DUT interfaces. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets +| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr, +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${fib_table_1}= | 9 +| ${fib_table_2}= | 99 + +| ${dut1_to_tg_ip1}= | 2001:62::3 +| ${dut1_to_tg_ip2}= | 2001:62::4 +| ${dut2_to_tg_ip1}= | 2003:62::3 +| ${dut2_to_tg_ip2}= | 2003:62::4 + +| ${dut1_to_dut2_ip1}= | 2002:62::1 +| ${dut1_to_dut2_ip2}= | 2002:62::2 +| ${dut2_to_dut1_ip1}= | 2002:62::3 +| ${dut2_to_dut1_ip2}= | 2002:62::4 + +| ${tg_dut1_ip1}= | 2001:62::1 +| ${tg_dut1_ip2}= | 2001:62::2 +| ${tg_dut2_ip1}= | 2003:62::1 +| ${tg_dut2_ip2}= | 2003:62::2 + +| ${ip_prefix}= | 64 +| ${timeout}= | 5 + +*** Test Cases *** +| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if1 and from +| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} +| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac} +| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1} +| | ... | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} +| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2} +| | ... | ${tg_dut1_ip2} | ${timeout} + +| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if1 and from +| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | ${timeout} + +| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if1 and from +| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | ${timeout} + +| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if1 and from +| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | ${timeout} + +| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if1 and from +| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac} +| | ... | ${tg_to_dut2_if1_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2} +| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} + +| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut1_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout} + +| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip2} | ${timeout} + + +| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip2} | ${timeout} + +| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout} + +| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} +| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2} +| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip2} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if1} +| | ... | ${dut2_to_tg_if1_mac} | ${tg_to_dut2_if1_mac} + +*** Keywords *** +| Setup Env - 2xVRF Each Node +| | [Documentation] +| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \ +| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2 +| | ... | are assigned to FIB2 (the same done on DUT2, just opposite). +| | ... | IP addresses and IP Neighbors are subsequently set for interfaces. +| | ... | The last setting is route for each fib table. +| | ... +| | ${dut1_if1_idx}= | Get Interface SW Index +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} +| | ${dut1_if2_idx}= | Get Interface SW Index +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} +| | ${dut2_if1_idx}= | Get Interface SW Index +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} +| | ${dut2_if2_idx}= | Get Interface SW Index +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} + +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE} + +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE} + +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} +| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} +| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix} + +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} +| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} +| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix} + +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac} | vrf=${fib_table_1} +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if1} +| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac} | vrf=${fib_table_1} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac} | vrf=${fib_table_1} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if1} +| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac} | vrf=${fib_table_1} + +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac} | vrf=${fib_table_2} +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if2} +| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac} | vrf=${fib_table_2} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac} | vrf=${fib_table_2} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if2} +| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac} | vrf=${fib_table_2} + +| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix} +| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1} +| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix} +| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1} + +| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix} +| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2} +| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix} +| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2} -- cgit 1.2.3-korg olor: #0000DD; font-weight: bold } /* Literal.Number.Hex */ .highlight .mi { color: #0000DD; font-weight: bold } /* Literal.Number.Integer */ .highlight .mo { color: #0000DD; font-weight: bold } /* Literal.Number.Oct */ .highlight .sa { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Affix */ .highlight .sb { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Backtick */ .highlight .sc { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Char */ .highlight .dl { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Delimiter */ .highlight .sd { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Doc */ .highlight .s2 { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Double */ .highlight .se { color: #0044dd; background-color: #fff0f0 } /* Literal.String.Escape */ .highlight .sh { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Heredoc */ .highlight .si { color: #3333bb; background-color: #fff0f0 } /* Literal.String.Interpol */ .highlight .sx { color: #22bb22; background-color: #f0fff0 } /* Literal.String.Other */ .highlight .sr { color: #008800; background-color: #fff0ff } /* Literal.String.Regex */ .highlight .s1 { color: #dd2200; background-color: #fff0f0 } /* Literal.String.Single */ .highlight .ss { color: #aa6600; background-color: #fff0f0 } /* Literal.String.Symbol */ .highlight .bp { color: #003388 } /* Name.Builtin.Pseudo */ .highlight .fm { color: #0066bb; font-weight: bold } /* Name.Function.Magic */ .highlight .vc { color: #336699 } /* Name.Variable.Class */ .highlight .vg { color: #dd7700 } /* Name.Variable.Global */ .highlight .vi { color: #3333bb } /* Name.Variable.Instance */ .highlight .vm { color: #336699 } /* Name.Variable.Magic */ .highlight .il { color: #0000DD; font-weight: bold } /* Literal.Number.Integer.Long */ } 
# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/performance/performance_setup.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER
| ...
| Suite Setup | Run Keywords
| ... | Set up 2-node performance topology with DUT's NIC model | L2
| ... | Intel-X710
| ... | AND | Set up performance test suite with MEMIF
| ...
| Suite Teardown | Tear down 2-node performance topology
| ...
| Test Setup | Set up performance test
| ...
| Test Teardown | Run Keywords
| ... | Tear down performance mrr test
| ... | AND | Tear down performance test with container
| ...
| Test Template | Local Template
| ...
| Documentation | *Raw results L2BD test cases*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
| ... | single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
| ... | and MAC learning enabled. DUT1 tested with 2p10GE NIC X710 by Intel.
| ... | Container is connected to VPP via Memif interface. Container is running
| ... | same VPP version as running on DUT. Container is limited via cgroup to
| ... | use cores allocated from pool of isolated CPUs. There are no memory
| ... | contraints.
| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
| ... | at line rate and reports total received/sent packets over trial period.
| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
| ... | flow-group) with all packets containing Ethernet header, IPv4 header
| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
| ... | addresses of the TG node interfaces.

*** Variables ***
# X710-DA2 bandwidth limit
| ${s_limit}= | ${10000000000}
# Traffic profile:
| ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain

*** Keywords ***
| Local Template
| | [Documentation]
| | ... | [Cfg] DUT runs L2BD switching config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
| | ... | trial throughput test.
| | ...
| | ... | *Arguments:*
| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_limit} | ${framesize}
| | And Apply startup configuration on all VPP DUTs
| | And Set up performance test with containers
| | And Initialize L2 Bridge Domain with memif pairs
| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}

*** Test Cases ***
| tc01-64B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 64B | 1C
| | framesize=${64} | phy_cores=${1}

| tc02-64B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 64B | 2C
| | framesize=${64} | phy_cores=${2}

| tc03-64B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 64B | 4C
| | framesize=${64} | phy_cores=${4}

| tc04-1518B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 1518B | 1C
| | framesize=${1518} | phy_cores=${1}

| tc05-1518B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 1518B | 2C
| | framesize=${1518} | phy_cores=${2}

| tc06-1518B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 1518B | 4C
| | framesize=${1518} | phy_cores=${4}

| tc07-9000B-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 9000B | 1C
| | framesize=${9000} | phy_cores=${1}

| tc08-9000B-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 9000B | 2C
| | framesize=${9000} | phy_cores=${2}

| tc09-9000B-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | 9000B | 4C
| | framesize=${9000} | phy_cores=${4}

| tc10-IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | IMIX | 1C
| | framesize=IMIX_v4_1 | phy_cores=${1}

| tc11-IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | IMIX | 2C
| | framesize=IMIX_v4_1 | phy_cores=${2}

| tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-1dcr-mrr
| | [Tags] | IMIX | 4C
| | framesize=IMIX_v4_1 | phy_cores=${4}