From 982e81efab69bc007455481b6425fcebc7213906 Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Tue, 17 Jan 2017 14:50:46 +0100 Subject: csit-func-tc-naming-change - phase 1 - change of ts directories - change of ts file names - splitting of former files to more files when suitable - more details: https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618 Signed-off-by: Jan Gelety --- tests/func/vrf/eth2p-ethip4-ip4basevrf-func.robot | 391 +++++++++++++++++++++ tests/func/vrf/eth2p-ethip6-ip6basevrf-func.robot | 409 ++++++++++++++++++++++ tests/func/vrf/vrf_tests.robot | 391 --------------------- tests/func/vrf/vrf_tests_v6.robot | 409 ---------------------- 4 files changed, 800 insertions(+), 800 deletions(-) create mode 100644 tests/func/vrf/eth2p-ethip4-ip4basevrf-func.robot create mode 100644 tests/func/vrf/eth2p-ethip6-ip6basevrf-func.robot delete mode 100644 tests/func/vrf/vrf_tests.robot delete mode 100644 tests/func/vrf/vrf_tests_v6.robot (limited to 'tests/func/vrf') diff --git a/tests/func/vrf/eth2p-ethip4-ip4basevrf-func.robot b/tests/func/vrf/eth2p-ethip4-ip4basevrf-func.robot new file mode 100644 index 0000000000..7a76a1805c --- /dev/null +++ b/tests/func/vrf/eth2p-ethip4-ip4basevrf-func.robot @@ -0,0 +1,391 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *Vpn routed forwarding - baseline IPv4* +| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two +| ... | links in between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of +| ... | IPv4. +| ... | *[Cfg] DUT configuration:* Each DUT is configured with two VRF tables; +| ... | Separation of traffic is tested by IP packets; Basic ARP and ROUTES are +| ... | set on DUT nodes; IP addresses are set on DUT interfaces. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets +| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr, +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${fib_table_1}= | 9 +| ${fib_table_2}= | 99 + +| ${dut1_to_tg_ip1}= | 10.0.0.3 +| ${dut1_to_tg_ip2}= | 10.0.0.4 +| ${dut2_to_tg_ip1}= | 30.0.0.3 +| ${dut2_to_tg_ip2}= | 30.0.0.4 + +| ${dut1_to_dut2_ip1}= | 20.0.0.1 +| ${dut1_to_dut2_ip2}= | 20.0.0.2 +| ${dut2_to_dut1_ip1}= | 20.0.0.3 +| ${dut2_to_dut1_ip2}= | 20.0.0.4 + +| ${tg_dut1_ip1}= | 10.0.0.1 +| ${tg_dut1_ip2}= | 10.0.0.2 +| ${tg_dut2_ip1}= | 30.0.0.1 +| ${tg_dut2_ip2}= | 30.0.0.2 + +| ${ip_prefix}= | 24 + +*** Test Cases *** +| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->TG-if1 and from +| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} +| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac} +| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1} | ${tg_dut1_ip1} | 5 +| | And Node replies to ICMP echo request | ${tg_node} +| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2} | ${tg_dut1_ip2} | 5 + +| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->DUT2-if1 and from +| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | 5 +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | 5 + +| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->DUT1-if1 and from +| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | 5 +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | 5 + +| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->TG-if1 and from +| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | 5 +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | 5 + +| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to TG->DUT2-if1 and from +| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac} +| | ... | ${tg_to_dut2_if1_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2} +| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} + +| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->TG-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | 5 + +| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->DUT2-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | 5 + +| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->DUT1-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | 5 + +| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->TG-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | 5 + +| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. +| | ... | [Enc] Eth-IPv4-ICMPv4. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. On every ingress +| | ... | and egress port on DUT is configured ARP and each DUT is configured +| | ... | with one route. +| | ... | [Ver] Packet is send from TG->DUT1-if1 to TG->DUT2-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} +| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2} +| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} + +*** Keywords *** +| Setup Env - 2xVRF Each Node +| | [Documentation] +| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \ +| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2 +| | ... | are assigned to FIB2 (the some done on DUT2, just opposite). IP +| | ... | addresses are subsequently set on interfaces, and ARP is set for +| | ... | neighbors. The last setting is route for each fib table. +| | ... +| | ${dut1_if1_idx}= | Get Interface SW Index +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} +| | ${dut1_if2_idx}= | Get Interface SW Index +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} +| | ${dut2_if1_idx}= | Get Interface SW Index +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} +| | ${dut2_if2_idx}= | Get Interface SW Index +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} +| | And Add fib table | ${dut1_node} +| | ... | ${tg_dut2_ip1} | ${ip_prefix} | ${fib_table_1} +| | ... | via ${dut2_to_dut1_ip1} sw_if_index ${dut1_if1_idx} multipath +| | And Add fib table | ${dut1_node} +| | ... | ${tg_dut2_ip2} | ${ip_prefix} | ${fib_table_2} +| | ... | via ${dut1_to_dut2_ip2} sw_if_index ${dut1_if2_idx} multipath +| | And Add fib table | ${dut2_node} +| | ... | ${tg_dut1_ip1} | ${ip_prefix} | ${fib_table_1} +| | ... | via ${dut2_to_dut1_ip1} sw_if_index ${dut2_if1_idx} multipath +| | And Add fib table | ${dut2_node} +| | ... | ${tg_dut1_ip2} | ${ip_prefix} | ${fib_table_2} +| | ... | via ${dut2_to_dut1_ip2} sw_if_index ${dut2_if2_idx} multipath + +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2} + +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2} + +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} +| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} +| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix} + +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} +| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} +| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix} + +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac} | vrf=${fib_table_1} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2_if1} +| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac} | vrf=${fib_table_1} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac} | vrf=${fib_table_1} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1_if1} +| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac} | vrf=${fib_table_1} + +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac} | vrf=${fib_table_2} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2_if2} +| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac} | vrf=${fib_table_2} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac} | vrf=${fib_table_2} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1_if2} +| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac} | vrf=${fib_table_2} + +| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix} +| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1} +| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix} +| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1} + +| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix} +| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2} +| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix} +| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2} diff --git a/tests/func/vrf/eth2p-ethip6-ip6basevrf-func.robot b/tests/func/vrf/eth2p-ethip6-ip6basevrf-func.robot new file mode 100644 index 0000000000..b88b6fd577 --- /dev/null +++ b/tests/func/vrf/eth2p-ethip6-ip6basevrf-func.robot @@ -0,0 +1,409 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/traffic.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *Vpn routed forwarding - baseline IPv6* +| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two +| ... | links in between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 +| ... | *[Cfg] DUT configuration:* Each DUT is configured with two VRF tables; +| ... | Separation of traffic is tested by IP packets; Neighbors and Routes are +| ... | set on DUT nodes; IP addresses are set on DUT interfaces. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets +| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr, +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| ${fib_table_1}= | 9 +| ${fib_table_2}= | 99 + +| ${dut1_to_tg_ip1}= | 2001:62::3 +| ${dut1_to_tg_ip2}= | 2001:62::4 +| ${dut2_to_tg_ip1}= | 2003:62::3 +| ${dut2_to_tg_ip2}= | 2003:62::4 + +| ${dut1_to_dut2_ip1}= | 2002:62::1 +| ${dut1_to_dut2_ip2}= | 2002:62::2 +| ${dut2_to_dut1_ip1}= | 2002:62::3 +| ${dut2_to_dut1_ip2}= | 2002:62::4 + +| ${tg_dut1_ip1}= | 2001:62::1 +| ${tg_dut1_ip2}= | 2001:62::2 +| ${tg_dut2_ip1}= | 2003:62::1 +| ${tg_dut2_ip2}= | 2003:62::2 + +| ${ip_prefix}= | 64 +| ${timeout}= | 5 + +*** Test Cases *** +| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if1 and from +| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} +| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac} +| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1} +| | ... | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} +| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2} +| | ... | ${tg_dut1_ip2} | ${timeout} + +| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if1 and from +| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | ${timeout} + +| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if1 and from +| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | ${timeout} + +| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if1 and from +| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | ${timeout} +| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | ${timeout} + +| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if1 and from +| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived. +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac} +| | ... | ${tg_to_dut2_if1_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2} +| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} + +| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut1_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout} + +| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip2} | ${timeout} + + +| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip2} | ${timeout} + +| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if1} +| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} +| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Node replies to ICMP echo request +| | ... | ${tg_node} | ${tg_to_dut1_if2} +| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} +| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout} + +| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. +| | ... | [Enc] Eth-IPv6-ICMPv6. +| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each +| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces +| | ... | are configured with IP addresses from *Variables*. Neighbors are +| | ... | configured for each DUTs ingress/egress ports, and each VRF is +| | ... | configured with just one route. +| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if2 where it +| | ... | should not arrive. +| | [Tags] | SKIP_PATCH +| | Given Path for Double-Link 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in Double-Link 3-node path are UP +| | When Setup Env - 2xVRF Each Node +| | Then Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} +| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2} +| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip2} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if1} +| | ... | ${dut2_to_tg_if1_mac} | ${tg_to_dut2_if1_mac} + +*** Keywords *** +| Setup Env - 2xVRF Each Node +| | [Documentation] +| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \ +| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2 +| | ... | are assigned to FIB2 (the same done on DUT2, just opposite). +| | ... | IP addresses and IP Neighbors are subsequently set for interfaces. +| | ... | The last setting is route for each fib table. +| | ... +| | ${dut1_if1_idx}= | Get Interface SW Index +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} +| | ${dut1_if2_idx}= | Get Interface SW Index +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} +| | ${dut2_if1_idx}= | Get Interface SW Index +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} +| | ${dut2_if2_idx}= | Get Interface SW Index +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} + +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE} + +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE} +| | Assign Interface To Fib Table +| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE} + +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2_if1} +| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut1_node} | ${dut1_to_dut2_if2} +| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix} + +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_dut1_if1} +| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix} +| | And Set Interface Address +| | ... | ${dut2_node} | ${dut2_to_dut1_if2} +| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix} + +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac} | vrf=${fib_table_1} +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if1} +| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac} | vrf=${fib_table_1} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac} | vrf=${fib_table_1} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if1} +| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac} | vrf=${fib_table_1} + +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac} | vrf=${fib_table_2} +| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if2} +| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac} | vrf=${fib_table_2} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac} | vrf=${fib_table_2} +| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if2} +| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac} | vrf=${fib_table_2} + +| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix} +| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1} +| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix} +| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1} + +| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix} +| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2} +| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix} +| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2} + +| | Vpp All RA Suppress Link Layer | ${nodes} diff --git a/tests/func/vrf/vrf_tests.robot b/tests/func/vrf/vrf_tests.robot deleted file mode 100644 index 0339573956..0000000000 --- a/tests/func/vrf/vrf_tests.robot +++ /dev/null @@ -1,391 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/ipv4.robot -| Resource | resources/libraries/robot/ipv6.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/traffic.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *Vpn routed forwarding - baseline IPv4* -| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two -| ... | links in between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of -| ... | IPv4. -| ... | *[Cfg] DUT configuration:*Each DUT is configured with two VRF tables; -| ... | Separation of traffic is tested by IP packets; Basic ARP and ROUTES are -| ... | set on DUT nodes; IP addresses are set on DUT interfaces. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets -| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG -| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr, -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${fib_table_1}= | 9 -| ${fib_table_2}= | 99 - -| ${dut1_to_tg_ip1}= | 10.0.0.3 -| ${dut1_to_tg_ip2}= | 10.0.0.4 -| ${dut2_to_tg_ip1}= | 30.0.0.3 -| ${dut2_to_tg_ip2}= | 30.0.0.4 - -| ${dut1_to_dut2_ip1}= | 20.0.0.1 -| ${dut1_to_dut2_ip2}= | 20.0.0.2 -| ${dut2_to_dut1_ip1}= | 20.0.0.3 -| ${dut2_to_dut1_ip2}= | 20.0.0.4 - -| ${tg_dut1_ip1}= | 10.0.0.1 -| ${tg_dut1_ip2}= | 10.0.0.2 -| ${tg_dut2_ip1}= | 30.0.0.1 -| ${tg_dut2_ip2}= | 30.0.0.2 - -| ${ip_prefix}= | 24 - -*** Test Cases *** -| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->TG-if1 and from -| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac} -| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1} | ${tg_dut1_ip1} | 5 -| | And Node replies to ICMP echo request | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac} -| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2} | ${tg_dut1_ip2} | 5 - -| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->DUT2-if1 and from -| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | 5 -| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | 5 - -| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->DUT1-if1 and from -| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | 5 -| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | 5 - -| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->TG-if1 and from -| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | 5 -| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | 5 - -| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to TG->DUT2-if1 and from -| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} -| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac} -| | ... | ${tg_to_dut2_if1_mac} -| | And Send Packet And Check Headers | ${tg_node} -| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2} -| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} - -| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->TG-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | 5 - -| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT1->DUT2-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | 5 - -| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->DUT1-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | 5 - -| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to DUT2->TG-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | 5 - -| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. -| | ... | [Enc] Eth-IPv4-ICMPv4. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. On every ingress -| | ... | and egress port on DUT is configured ARP and each DUT is configured -| | ... | with one route. -| | ... | [Ver] Packet is send from TG->DUT1-if1 to TG->DUT2-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} -| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2} -| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} - -*** Keywords *** -| Setup Env - 2xVRF Each Node -| | [Documentation] -| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \ -| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2 -| | ... | are assigned to FIB2 (the some done on DUT2, just opposite). IP -| | ... | addresses are subsequently set on interfaces, and ARP is set for -| | ... | neighbors. The last setting is route for each fib table. -| | ... -| | ${dut1_if1_idx}= | Get Interface SW Index -| | ... | ${dut1_node} | ${dut1_to_dut2_if1} -| | ${dut1_if2_idx}= | Get Interface SW Index -| | ... | ${dut1_node} | ${dut1_to_dut2_if2} -| | ${dut2_if1_idx}= | Get Interface SW Index -| | ... | ${dut2_node} | ${dut2_to_dut1_if1} -| | ${dut2_if2_idx}= | Get Interface SW Index -| | ... | ${dut2_node} | ${dut2_to_dut1_if2} -| | And Add fib table | ${dut1_node} -| | ... | ${tg_dut2_ip1} | ${ip_prefix} | ${fib_table_1} -| | ... | via ${dut2_to_dut1_ip1} sw_if_index ${dut1_if1_idx} multipath -| | And Add fib table | ${dut1_node} -| | ... | ${tg_dut2_ip2} | ${ip_prefix} | ${fib_table_2} -| | ... | via ${dut1_to_dut2_ip2} sw_if_index ${dut1_if2_idx} multipath -| | And Add fib table | ${dut2_node} -| | ... | ${tg_dut1_ip1} | ${ip_prefix} | ${fib_table_1} -| | ... | via ${dut2_to_dut1_ip1} sw_if_index ${dut2_if1_idx} multipath -| | And Add fib table | ${dut2_node} -| | ... | ${tg_dut1_ip2} | ${ip_prefix} | ${fib_table_2} -| | ... | via ${dut2_to_dut1_ip2} sw_if_index ${dut2_if2_idx} multipath - -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1} -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2} -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1} -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2} - -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1} -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2} -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1} -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2} - -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_dut2_if1} -| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_dut2_if2} -| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix} - -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_dut1_if1} -| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_dut1_if2} -| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix} - -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac} | vrf=${fib_table_1} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2_if1} -| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac} | vrf=${fib_table_1} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac} | vrf=${fib_table_1} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1_if1} -| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac} | vrf=${fib_table_1} - -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac} | vrf=${fib_table_2} -| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2_if2} -| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac} | vrf=${fib_table_2} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac} | vrf=${fib_table_2} -| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1_if2} -| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac} | vrf=${fib_table_2} - -| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix} -| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1} -| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix} -| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1} - -| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix} -| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2} -| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix} -| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2} diff --git a/tests/func/vrf/vrf_tests_v6.robot b/tests/func/vrf/vrf_tests_v6.robot deleted file mode 100644 index b88b6fd577..0000000000 --- a/tests/func/vrf/vrf_tests_v6.robot +++ /dev/null @@ -1,409 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/ipv4.robot -| Resource | resources/libraries/robot/ipv6.robot -| Resource | resources/libraries/robot/interfaces.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/traffic.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *Vpn routed forwarding - baseline IPv6* -| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two -| ... | links in between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 -| ... | *[Cfg] DUT configuration:* Each DUT is configured with two VRF tables; -| ... | Separation of traffic is tested by IP packets; Neighbors and Routes are -| ... | set on DUT nodes; IP addresses are set on DUT interfaces. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets -| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG -| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr, -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* - -*** Variables *** -| ${fib_table_1}= | 9 -| ${fib_table_2}= | 99 - -| ${dut1_to_tg_ip1}= | 2001:62::3 -| ${dut1_to_tg_ip2}= | 2001:62::4 -| ${dut2_to_tg_ip1}= | 2003:62::3 -| ${dut2_to_tg_ip2}= | 2003:62::4 - -| ${dut1_to_dut2_ip1}= | 2002:62::1 -| ${dut1_to_dut2_ip2}= | 2002:62::2 -| ${dut2_to_dut1_ip1}= | 2002:62::3 -| ${dut2_to_dut1_ip2}= | 2002:62::4 - -| ${tg_dut1_ip1}= | 2001:62::1 -| ${tg_dut1_ip2}= | 2001:62::2 -| ${tg_dut2_ip1}= | 2003:62::1 -| ${tg_dut2_ip2}= | 2003:62::2 - -| ${ip_prefix}= | 64 -| ${timeout}= | 5 - -*** Test Cases *** -| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if1 and from -| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} -| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac} -| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1} -| | ... | ${tg_dut1_ip1} | ${timeout} -| | And Node replies to ICMP echo request | ${tg_node} -| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac} -| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2} -| | ... | ${tg_dut1_ip2} | ${timeout} - -| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if1 and from -| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | ${timeout} -| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | ${timeout} - -| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if1 and from -| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | ${timeout} -| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | ${timeout} - -| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if1 and from -| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | ${timeout} -| | And Node replies to ICMP echo request | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | ${timeout} - -| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if1 and from -| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived. -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} -| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac} -| | ... | ${tg_to_dut2_if1_mac} -| | And Send Packet And Check Headers | ${tg_node} -| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2} -| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} - -| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut1_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout} - -| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | ${timeout} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip2} | ${timeout} - - -| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | ${timeout} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip2} | ${timeout} - -| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if1} -| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac} -| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Node replies to ICMP echo request -| | ... | ${tg_node} | ${tg_to_dut1_if2} -| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac} -| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout} - -| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. -| | ... | [Enc] Eth-IPv6-ICMPv6. -| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each -| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces -| | ... | are configured with IP addresses from *Variables*. Neighbors are -| | ... | configured for each DUTs ingress/egress ports, and each VRF is -| | ... | configured with just one route. -| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if2 where it -| | ... | should not arrive. -| | [Tags] | SKIP_PATCH -| | Given Path for Double-Link 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in Double-Link 3-node path are UP -| | When Setup Env - 2xVRF Each Node -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip1} -| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2} -| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send Packet And Check Headers | ${tg_node} | ${tg_dut1_ip2} -| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if1} -| | ... | ${dut2_to_tg_if1_mac} | ${tg_to_dut2_if1_mac} - -*** Keywords *** -| Setup Env - 2xVRF Each Node -| | [Documentation] -| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \ -| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2 -| | ... | are assigned to FIB2 (the same done on DUT2, just opposite). -| | ... | IP addresses and IP Neighbors are subsequently set for interfaces. -| | ... | The last setting is route for each fib table. -| | ... -| | ${dut1_if1_idx}= | Get Interface SW Index -| | ... | ${dut1_node} | ${dut1_to_dut2_if1} -| | ${dut1_if2_idx}= | Get Interface SW Index -| | ... | ${dut1_node} | ${dut1_to_dut2_if2} -| | ${dut2_if1_idx}= | Get Interface SW Index -| | ... | ${dut2_node} | ${dut2_to_dut1_if1} -| | ${dut2_if2_idx}= | Get Interface SW Index -| | ... | ${dut2_node} | ${dut2_to_dut1_if2} - -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1} | ipv6=${TRUE} -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2} | ipv6=${TRUE} -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE} -| | Assign Interface To Fib Table -| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE} - -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1} | ipv6=${TRUE} -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2} | ipv6=${TRUE} -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE} -| | Assign Interface To Fib Table -| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE} - -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_dut2_if1} -| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut1_node} | ${dut1_to_dut2_if2} -| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix} - -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_dut1_if1} -| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix} -| | And Set Interface Address -| | ... | ${dut2_node} | ${dut2_to_dut1_if2} -| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix} - -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac} | vrf=${fib_table_1} -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if1} -| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac} | vrf=${fib_table_1} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac} | vrf=${fib_table_1} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if1} -| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac} | vrf=${fib_table_1} - -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac} | vrf=${fib_table_2} -| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if2} -| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac} | vrf=${fib_table_2} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac} | vrf=${fib_table_2} -| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if2} -| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac} | vrf=${fib_table_2} - -| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix} -| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1} -| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix} -| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1} - -| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix} -| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2} -| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix} -| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2} - -| | Vpp All RA Suppress Link Layer | ${nodes} -- cgit 1.2.3-korg