From 982e81efab69bc007455481b6425fcebc7213906 Mon Sep 17 00:00:00 2001 From: Jan Gelety Date: Tue, 17 Jan 2017 14:50:46 +0100 Subject: csit-func-tc-naming-change - phase 1 - change of ts directories - change of ts file names - splitting of former files to more files when suitable - more details: https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618 Signed-off-by: Jan Gelety --- .../eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot | 76 +++ ...4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot | 119 +++++ .../eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot | 78 +++ .../vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot | 66 +++ ...6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot | 120 +++++ .../eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot | 78 +++ ...h4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot | 200 ++++++++ ...h4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot | 200 ++++++++ tests/func/vxlan/vxlan_bd_dot1q.robot | 76 --- tests/func/vxlan/vxlan_bd_untagged.robot | 539 --------------------- tests/func/vxlan/vxlan_xconnect_untagged.robot | 66 --- 11 files changed, 937 insertions(+), 681 deletions(-) create mode 100644 tests/func/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot create mode 100644 tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot create mode 100644 tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot create mode 100644 tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot create mode 100644 tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot create mode 100644 tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot create mode 100644 tests/func/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot create mode 100644 tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot delete mode 100644 tests/func/vxlan/vxlan_bd_dot1q.robot delete mode 100644 tests/func/vxlan/vxlan_bd_untagged.robot delete mode 100644 tests/func/vxlan/vxlan_xconnect_untagged.robot (limited to 'tests/func/vxlan') diff --git a/tests/func/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot b/tests/func/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..592154845d --- /dev/null +++ b/tests/func/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot @@ -0,0 +1,76 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN over VLAN test cases* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-dot1q-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning +| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN +| ... | tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and +| ... | MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${VNI}= | 23 +| ${BID}= | 23 +| ${VLAN}= | 10 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4oVLAN tunnels switch ICMPv4 between TG links +| | [Tags] | EXPECTED_FAILING +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure L2 bridge-domain (MAC learning enabled), each with one +| | ... | interface to TG and one VXLAN tunnel interface towards the other DUT +| | ... | over VLAN sub-interface. [Ver] Make TG send ICMPv4 Echo Req between +| | ... | two of its interfaces, verify all packets are received. [Ref] RFC7348. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Vlan interfaces for VXLAN are created | ${VLAN} +| | ... | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${dut2_node} | ${dut2_to_dut1} +| | And IP addresses are set on interfaces +| | ... | ${dut1_node} | ${dut1s_vlan_name} | ${dut1s_vlan_index} +| | ... | ${dut2_node} | ${dut2s_vlan_name} | ${dut2s_vlan_index} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI} +| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan} +| | ... | up +| | And Interfaces are added to BD | ${dut1_node} | ${BID} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI} +| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan} +| | ... | up +| | And Interfaces are added to BD | ${dut2_node} | ${BID} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send and receive ICMPv4 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..357f339a7c --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot @@ -0,0 +1,119 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV | VPP_VM_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with VM combined with VXLAN test cases - IPv4* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 + +| ${ip4_addr1}= | 172.16.0.1 +| ${ip4_addr2}= | 172.16.0.2 +| ${ip4_prefix}= | 24 + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +| ${qemu1}= | qemu_instance_1 +| ${qemu2}= | qemu_instance_2 + +| ${dut1_vhost1}= | dut1_vhost_if1 +| ${dut1_vhost2}= | dut1_vhost_if2 +| ${dut2_vhost1}= | dut2_vhost_if1 +| ${dut2_vhost2}= | dut2_vhost_if2 + +*** Test Cases *** +| TC01:DUT1 and DUT2 with two L2BDs and VXLANoIPv4 tunnel switch ICMPv4 between TG links and VM links +| | [Documentation] +| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. +| | ... | [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2; Eth-IPv4-ICMPv4 +| | ... | on TG-DUTn and DUTn=VM. +| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first +| | ... | L2BD with untagged interface to TG and vhost-user interface to local +| | ... | VM, second one with vhost-user interface to local VM and VXLAN +| | ... | interface towards the other DUT. Configure linux bridge on both VMs +| | ... | to pass traffic between both vhost-user interfaces. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between two of its interfaces to +| | ... | be switched by DUT1 and DUT2; verify packets are switched between +| | ... | these TG interfaces. +| | ... | [Ref] RFC7348. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut1_vhost1} +| | ... | ${dut1_vhost2} +| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut2_vhost1} +| | ... | ${dut2_vhost2} +| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} +| | ... | ${sock2} | ${qemu1} +| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} +| | ... | ${sock2} | ${qemu2} +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} +| | ... | ${ip4_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} +| | ... | ${ip4_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} +| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} +| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} +| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} +| | Then Send and receive ICMPv4 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} +| | ... | ${${qemu1}} | ${qemu1} +| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} +| | ... | ${${qemu2}} | ${qemu2} +| | ... | AND | Check VPP PID in Teardown diff --git a/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..543fec22b8 --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot @@ -0,0 +1,78 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *Bridge-domain with VXLAN test cases - IPv4* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 +| ${vni_2}= | 35 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 +| ${bd_id3}= | 30 +| ${shg1}= | 1 +| ${shg2}= | 2 + +| ${ip4_addr1}= | 172.16.0.1 +| ${ip4_addr2}= | 172.16.0.2 +| ${ip4_prefix}= | 24 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels switch ICMPv4 between TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG +| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in +| | ... | both directions and are correct on receive. [Ref] RFC7348. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2} +| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1} +| | And IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send and receive ICMPv4 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot new file mode 100644 index 0000000000..de38c56b2d --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot @@ -0,0 +1,66 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *RFC7348 VXLAN: L2 cross-connect with VXLAN test cases* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | cross-connect (L2XC) switching; VXLAN tunnels are configured between +| ... | L2XCs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive +| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${VNI}= | 24 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2XC and VXLANoIPv4 tunnels switch ICMPv4 between TG links +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ +| | ... | [Ref] RFC7348.DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On +| | ... | DUT1 and DUT2 configure L2 cross-connect (L2XC), each with one +| | ... | interface to TG and one VXLAN tunnel interface towards the other +| | ... | DUT. [Ver] Make TG send ICMPv4 Echo Req between two of its +| | ... | interfaces; verify all packets are received. [Ref] RFC7348. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2} +| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1} +| | And IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI} +| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} +| | And Interfaces are added to xconnect | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI} +| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} +| | And Interfaces are added to xconnect | ${dut2_node} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send and receive ICMPv4 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot new file mode 100644 index 0000000000..19846294a3 --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot @@ -0,0 +1,120 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with VM combined with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +| ${sock1}= | /tmp/sock1 +| ${sock2}= | /tmp/sock2 + +| ${qemu1}= | qemu_instance_1 +| ${qemu2}= | qemu_instance_2 + +| ${dut1_vhost1}= | dut1_vhost_if1 +| ${dut1_vhost2}= | dut1_vhost_if2 +| ${dut2_vhost1}= | dut2_vhost_if1 +| ${dut2_vhost2}= | dut2_vhost_if2 + +*** Test Cases *** +| TC01:DUT1 and DUT2 with two L2BDs and VXLANoIPv6 tunnel switch ICMPv6 between TG links and VM links +| | [Documentation] +| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. +| | ... | [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2; Eth-IPv4-ICMPv4 +| | ... | on TG-DUTn and DUTn=VM. +| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first +| | ... | L2BD with untagged interface to TG and vhost-user interface to local +| | ... | VM, second one with vhost-user interface to local VM and VXLAN +| | ... | interface towards the other DUT. Configure linux bridge on both VMs +| | ... | to pass traffic between both vhost-user interfaces. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between two of its interfaces to +| | ... | be switched by DUT1 and DUT2; verify packets are switched between +| | ... | these TG interfaces. +| | ... | [Ref] RFC7348. +| | [Tags] | VPP_VM_ENV +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut1_vhost1} +| | ... | ${dut1_vhost2} +| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} +| | ... | ${sock1} +| | ... | ${sock2} +| | ... | ${dut2_vhost1} +| | ... | ${dut2_vhost2} +| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} +| | ... | ${sock2} | ${qemu1} +| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} +| | ... | ${sock2} | ${qemu2} +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} +| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} +| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} +| | Then Send and receive ICMPv6 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} +| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} +| | ... | AND | Show vpp trace dump on all DUTs +| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} +| | ... | ${${qemu1}} | ${qemu1} +| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} +| | ... | ${${qemu2}} | ${qemu2} +| | ... | AND | Check VPP PID in Teardown diff --git a/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..23b88d45f2 --- /dev/null +++ b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-func.robot @@ -0,0 +1,78 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *Bridge-domain with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled; +| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 + +| ${bd_id1}= | 10 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure L2 bridge-domain (MAC learning enabled), each with one +| | ... | interface to TG and one VXLAN tunnel interface towards the other +| | ... | DUT. [Ver] Make TG send ICMPv6 Echo Req between two of its +| | ... | interfaces to be switched by DUT1 and DUT2; verify all packets +| | ... | are received. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send and receive ICMPv6 bidirectionally +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/func/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot new file mode 100644 index 0000000000..8afb22a717 --- /dev/null +++ b/tests/func/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot @@ -0,0 +1,200 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv4* +| ... +| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology +| ... | with double parallel links. +| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled +| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured +| ... | between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 +| ${vni_2}= | 35 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 +| ${bd_id3}= | 30 +| ${shg1}= | 1 +| ${shg2}= | 2 + +| ${ip4_addr1}= | 172.16.0.1 +| ${ip4_addr2}= | 172.16.0.2 +| ${ip4_prefix}= | 24 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure +| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged +| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make +| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be +| | ... | switched by DUT1 and DUT2; verify packets are not switched between +| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. +| | ... | [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} +| | ... | ${ip4_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} +| | ... | ${ip4_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv4 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut2_if1} +| | | ... | ${tg_to_dut2_if2} + +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 +| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one +| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces +| | ... | to be switched by DUT1 and DUT2; verify packets are switched between +| | ... | all TG interfaces. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} +| | ... | ${ip4_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} +| | ... | ${ip4_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip4_addr1} | ${ip4_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip4_addr2} | ${ip4_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv4 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut2_if1} +| | ... | ${tg_to_dut2_if2} diff --git a/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot new file mode 100644 index 0000000000..2ed07462cf --- /dev/null +++ b/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot @@ -0,0 +1,200 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/vxlan.robot +| Resource | resources/libraries/robot/l2_traffic.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/double_qemu_setup.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv6* +| ... +| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology +| ... | with double parallel links. +| ... | *[Enc] Packet encapsulations:* th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on +| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with MAC learning enabled +| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured +| ... | between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent +| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr +| ... | and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${vni_1}= | 23 +| ${vni_2}= | 35 + +| ${bd_id1}= | 10 +| ${bd_id2}= | 20 +| ${bd_id3}= | 30 +| ${shg1}= | 1 +| ${shg2}= | 2 + +| ${ip6_addr1}= | 3ffe:64::1 +| ${ip6_addr2}= | 3ffe:64::2 +| ${ip6_prefix}= | 64 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure +| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged +| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make +| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be +| | ... | switched by DUT1 and DUT2; verify packets are not switched between +| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. +| | ... | [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg1} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Run Keyword And Expect Error | ICMP echo Rx timeout +| | ... | Send and receive ICMPv6 bidirectionally +| | | ... | ${tg_node} | ${tg_to_dut2_if1} +| | | ... | ${tg_to_dut2_if2} + +| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links +| | [Documentation] +| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ +| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 +| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces +| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN +| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 +| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one +| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces +| | ... | to be switched by DUT1 and DUT2; verify packets are switched between +| | ... | all TG interfaces. [Ref] RFC7348. +| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO +| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} +| | ... | ${nodes['DUT1']} +| | ... | ${nodes['DUT2']} +| | And Interfaces in 3-node BD-SHG testing are up +| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} +| | ... | ${ip6_prefix} +| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} +| | ... | ${ip6_prefix} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} +| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} +| | | ... | ${ip6_addr1} | ${ip6_addr2} +| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} +| | | ... | ${ip6_addr2} | ${ip6_addr1} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up +| | And Vpp Node Interfaces Ready Wait | ${dut1_node} +| | And Vpp Node Interfaces Ready Wait | ${dut2_node} +| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} +| | ... | ${bd_id1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} +| | ... | ${bd_id1} | ${shg1} +| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} +| | ... | ${bd_id1} | ${shg2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} +| | ... | ${bd_id2} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} +| | ... | ${bd_id2} +| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} +| | ... | ${bd_id3} +| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} +| | ... | ${bd_id3} +| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if1} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if1} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut1_if2} +| | ... | ${tg_to_dut2_if2} +| | And Send and receive ICMPv6 bidirectionally | ${tg_node} +| | ... | ${tg_to_dut2_if1} +| | ... | ${tg_to_dut2_if2} diff --git a/tests/func/vxlan/vxlan_bd_dot1q.robot b/tests/func/vxlan/vxlan_bd_dot1q.robot deleted file mode 100644 index 592154845d..0000000000 --- a/tests/func/vxlan/vxlan_bd_dot1q.robot +++ /dev/null @@ -1,76 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/vxlan.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN over VLAN test cases* -| ... -| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on -| ... | DUT1-DUT2, Eth-dot1q-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning -| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN -| ... | tunnels are configured between L2BDs on DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are -| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG -| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and -| ... | MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. - -*** Variables *** -| ${VNI}= | 23 -| ${BID}= | 23 -| ${VLAN}= | 10 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4oVLAN tunnels switch ICMPv4 between TG links -| | [Tags] | EXPECTED_FAILING -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 -| | ... | configure L2 bridge-domain (MAC learning enabled), each with one -| | ... | interface to TG and one VXLAN tunnel interface towards the other DUT -| | ... | over VLAN sub-interface. [Ver] Make TG send ICMPv4 Echo Req between -| | ... | two of its interfaces, verify all packets are received. [Ref] RFC7348. -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Vlan interfaces for VXLAN are created | ${VLAN} -| | ... | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${dut2_node} | ${dut2_to_dut1} -| | And IP addresses are set on interfaces -| | ... | ${dut1_node} | ${dut1s_vlan_name} | ${dut1s_vlan_index} -| | ... | ${dut2_node} | ${dut2s_vlan_name} | ${dut2s_vlan_index} -| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI} -| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan} -| | ... | up -| | And Interfaces are added to BD | ${dut1_node} | ${BID} -| | ... | ${dut1_to_tg} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI} -| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan} -| | ... | up -| | And Interfaces are added to BD | ${dut2_node} | ${BID} -| | ... | ${dut2_to_tg} | ${dut2s_vxlan} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} diff --git a/tests/func/vxlan/vxlan_bd_untagged.robot b/tests/func/vxlan/vxlan_bd_untagged.robot deleted file mode 100644 index b708b6691a..0000000000 --- a/tests/func/vxlan/vxlan_bd_untagged.robot +++ /dev/null @@ -1,539 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/vxlan.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Resource | resources/libraries/robot/qemu.robot -| Resource | resources/libraries/robot/double_qemu_setup.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN test cases* -| ... -| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes; TG=DUT1=DUT2=TG 3-node circular -| ... | topology with double parallel links. -| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on -| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4; -| ... | Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on -| ... | TG-DUTn for L2 switching of IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning -| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN -| ... | tunnels are configured between L2BDs on DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive -| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. - -*** Variables *** -| ${vni_1}= | 23 -| ${vni_2}= | 35 - -| ${bd_id1}= | 10 -| ${bd_id2}= | 20 -| ${bd_id3}= | 30 -| ${shg1}= | 1 -| ${shg2}= | 2 - -| ${ip4_addr1}= | 172.16.0.1 -| ${ip4_addr2}= | 172.16.0.2 -| ${ip4_prefix}= | 24 - -| ${ip6_addr1}= | 3ffe:64::1 -| ${ip6_addr2}= | 3ffe:64::2 -| ${ip6_prefix}= | 64 - -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -| ${qemu1}= | qemu_instance_1 -| ${qemu2}= | qemu_instance_2 - -| ${dut1_vhost1}= | dut1_vhost_if1 -| ${dut1_vhost2}= | dut1_vhost_if2 -| ${dut2_vhost1}= | dut2_vhost_if1 -| ${dut2_vhost2}= | dut2_vhost_if2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 -| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG -| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in -| | ... | both directions and are correct on receive. [Ref] RFC7348. -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2} -| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1} -| | And IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE} -| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${dut2s_vxlan} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure -| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged -| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make -| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be -| | ... | switched by DUT1 and DUT2; verify packets are not switched between -| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. -| | ... | [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} -| | ... | ${ip4_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} -| | ... | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMPv4 bidirectionally -| | | ... | ${tg_node} | ${tg_to_dut2_if1} -| | | ... | ${tg_to_dut2_if2} - -| TC03: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 -| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one -| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces -| | ... | to be switched by DUT1 and DUT2; verify packets are switched between -| | ... | all TG interfaces. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} -| | ... | ${ip4_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} -| | ... | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv4 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut2_if1} -| | ... | ${tg_to_dut2_if2} - -| TC04: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2 -| | ... | configure L2 bridge-domain (MAC learning enabled), each with one -| | ... | interface to TG and one VXLAN tunnel interface towards the other -| | ... | DUT. [Ver] Make TG send ICMPv6 Echo Req between two of its -| | ... | interfaces to be switched by DUT1 and DUT2; verify all packets -| | ... | are received. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${dut2s_vxlan} -| | Then Send and receive ICMPv6 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} - -| TC05: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure -| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged -| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make -| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be -| | ... | switched by DUT1 and DUT2; verify packets are not switched between -| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1. -| | ... | [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg1} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send and receive ICMPv6 bidirectionally -| | | ... | ${tg_node} | ${tg_to_dut2_if1} -| | | ... | ${tg_to_dut2_if2} - -| TC06: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links -| | [Documentation] -| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \ -| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2 -| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces -| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN -| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2 -| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one -| | ... | untagged interface to TG and one VXLAN interface towards the DUT1. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces -| | ... | to be switched by DUT1 and DUT2; verify packets are switched between -| | ... | all TG interfaces. [Ref] RFC7348. -| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO -| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']} -| | ... | ${nodes['DUT1']} -| | ... | ${nodes['DUT2']} -| | And Interfaces in 3-node BD-SHG testing are up -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1} -| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up -| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up -| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up -| | And Vpp Node Interfaces Ready Wait | ${dut1_node} -| | And Vpp Node Interfaces Ready Wait | ${dut2_node} -| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2} -| | ... | ${bd_id1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1} -| | ... | ${bd_id1} | ${shg1} -| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2} -| | ... | ${bd_id1} | ${shg2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1} -| | ... | ${bd_id2} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1} -| | ... | ${bd_id2} -| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2} -| | ... | ${bd_id3} -| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2} -| | ... | ${bd_id3} -| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if1} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if1} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut1_if2} -| | ... | ${tg_to_dut2_if2} -| | And Send and receive ICMPv6 bidirectionally | ${tg_node} -| | ... | ${tg_to_dut2_if1} -| | ... | ${tg_to_dut2_if2} - -| TC07:DUT1 and DUT2 with two L2BDs and VXLANoIPv4 tunnel switch ICMPv4 between TG links and VM links -| | [Documentation] -| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. -| | ... | [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2; Eth-IPv4-ICMPv4 -| | ... | on TG-DUTn and DUTn=VM. -| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first -| | ... | L2BD with untagged interface to TG and vhost-user interface to local -| | ... | VM, second one with vhost-user interface to local VM and VXLAN -| | ... | interface towards the other DUT. Configure linux bridge on both VMs -| | ... | to pass traffic between both vhost-user interfaces. -| | ... | [Ver] Make TG send ICMPv4 Echo Req between two of its interfaces to -| | ... | be switched by DUT1 and DUT2; verify packets are switched between -| | ... | these TG interfaces. -| | ... | [Ref] RFC7348. -| | [Tags] | VPP_VM_ENV -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut1_vhost1} -| | ... | ${dut1_vhost2} -| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut2_vhost1} -| | ... | ${dut2_vhost2} -| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} -| | ... | ${sock2} | ${qemu1} -| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} -| | ... | ${sock2} | ${qemu2} -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1} -| | ... | ${ip4_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2} -| | ... | ${ip4_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip4_addr1} | ${ip4_addr2} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip4_addr2} | ${ip4_addr1} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} -| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} -| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} -| | ... | ${${qemu1}} | ${qemu1} -| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} -| | ... | ${${qemu2}} | ${qemu2} -| | ... | AND | Check VPP PID in Teardown - -| TC08:DUT1 and DUT2 with two L2BDs and VXLANoIPv6 tunnel switch ICMPv6 between TG links and VM links -| | [Documentation] -| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG. -| | ... | [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2; Eth-IPv4-ICMPv4 -| | ... | on TG-DUTn and DUTn=VM. -| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first -| | ... | L2BD with untagged interface to TG and vhost-user interface to local -| | ... | VM, second one with vhost-user interface to local VM and VXLAN -| | ... | interface towards the other DUT. Configure linux bridge on both VMs -| | ... | to pass traffic between both vhost-user interfaces. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between two of its interfaces to -| | ... | be switched by DUT1 and DUT2; verify packets are switched between -| | ... | these TG interfaces. -| | ... | [Ref] RFC7348. -| | [Tags] | VPP_VM_ENV -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut1_vhost1} -| | ... | ${dut1_vhost2} -| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | ... | ${dut2_vhost1} -| | ... | ${dut2_vhost2} -| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} -| | ... | ${sock2} | ${qemu1} -| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1} -| | ... | ${sock2} | ${qemu2} -| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1} -| | ... | ${ip6_prefix} -| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2} -| | ... | ${ip6_prefix} -| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2} -| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1} -| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1} -| | | ... | ${ip6_addr1} | ${ip6_addr2} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1} -| | | ... | ${ip6_addr2} | ${ip6_addr1} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1} -| | ... | ${dut1_to_tg} | ${${dut1_vhost1}} -| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2} -| | ... | ${dut1s_vxlan} | ${${dut1_vhost2}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1} -| | ... | ${dut2_to_tg} | ${${dut2_vhost1}} -| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2} -| | ... | ${dut2s_vxlan} | ${${dut2_vhost2}} -| | Then Send and receive ICMPv6 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} -| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes} -| | ... | AND | Show vpp trace dump on all DUTs -| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node} -| | ... | ${${qemu1}} | ${qemu1} -| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node} -| | ... | ${${qemu2}} | ${qemu2} -| | ... | AND | Check VPP PID in Teardown diff --git a/tests/func/vxlan/vxlan_xconnect_untagged.robot b/tests/func/vxlan/vxlan_xconnect_untagged.robot deleted file mode 100644 index de38c56b2d..0000000000 --- a/tests/func/vxlan/vxlan_xconnect_untagged.robot +++ /dev/null @@ -1,66 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/vxlan.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV -| Test Setup | Func Test Setup -| Test Teardown | Func Test Teardown -| Documentation | *RFC7348 VXLAN: L2 cross-connect with VXLAN test cases* -| ... -| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on -| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 -| ... | cross-connect (L2XC) switching; VXLAN tunnels are configured between -| ... | L2XCs on DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets -| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive -| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC7348. - -*** Variables *** -| ${VNI}= | 24 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC and VXLANoIPv4 tunnels switch ICMPv4 between TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \ -| | ... | [Ref] RFC7348.DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On -| | ... | DUT1 and DUT2 configure L2 cross-connect (L2XC), each with one -| | ... | interface to TG and one VXLAN tunnel interface towards the other -| | ... | DUT. [Ver] Make TG send ICMPv4 Echo Req between two of its -| | ... | interfaces; verify all packets are received. [Ref] RFC7348. -| | Given Path for 3-node testing is set -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in 3-node path are up -| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2} -| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1} -| | And IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE} -| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI} -| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} -| | And Interfaces are added to xconnect | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI} -| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} -| | And Interfaces are added to xconnect | ${dut2_node} -| | ... | ${dut2_to_tg} | ${dut2s_vxlan} -| | Then Send and receive ICMPv4 bidirectionally -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} -- cgit 1.2.3-korg